Every supported distribution has at least the 3.3 branch of GnuTLS
(stable branch starting in April 2014). That branch was maintained
for bug-fixes until July 2018, so some distributions (e.g. RHEL7,
SUSE Enterprise 12) are still on it, keeping us from requiring 3.4 yet.
Also clarify a comment about when the Mac OS build of gnutls started
being compiled with pkcs11 support.
With RHEL/CentOS 6 EOL and already unsupported by Wireshark, there's no
reason to keep the minimum version of libgcrypt below 1.5.0 (which was
released 9.5 years ago). Version 1.6.0 is a big improvement in functionality,
but RHEL/CentOS 7 is stuck on 1.5.3 (As an aside, GCRYPT_VERSION_NUMBER
wasn't defined until 1.5.1, so this change will make us actually use the
libgcrypt AES-WRAP handling on 1.5.0)
New link type DLT_ETW is added for write and read Event Trace on Windows.
This change updates MBIM dissector to decode a MBIM message from
a DLT_ETW packet.
Enable PKCS #11 support in macOS builds with macos-setup.sh (already
supported on macOS via Homebrew and on all other OSes with GnuTLS 3.4
or greater) by installing p11-kit (and its dependency libtasn1) and
building nettle and GnuTLS against it.
Convert wiretap/ascend.y.in from Bison/YACC to Lemon and rename it to
wiretap/ascend_parser.lemon. Tighten up some of our scanning and
parsing. Make the indentation in it and related files consistent. Aside
from the recent IPv4 fragment offset changes, this produces identical
output to the 3.4 branch for the Ascend trace files I have here.
Remove the comment about supporting other commands. Another timeline
might have an Ascend that successfully pivoted to DSL or 15625B+1D
gigabit ISDN, but this one has neither.
This was our last/only Bison/YACC file, so remove Bison/YACC as a
development and packaging dependency and remove references to it from
the documentation.
It's possible to play opus payload with libopus (https://opus-codec.org/).
Closes#16882.
Helped-by: Pascal Quantin <pascal.quantin@gmail.com>
Signed-off-by: Lin Sun <lin.sun@zoom.us>
Signed-off-by: Yuanzhi Li <ryanlee@mail.ustc.edu.cn>
Remove the --check-addtext and --build flags. They were used for
checkAddTextCalls, which was removed in e2735ecfdd.
Add the sources in ui/qt except for qcustomplot.{cpp,h}. Fix issues in
main.cpp, rtp_audio_stream.cpp, and wireshark_zip_helper.cpp.
Rename "index"es in packet-usb-hid.c.
Enable Link Time Optimization, also known as Interprocedural Optimization
if the compiler supports it.
Added a CMake option (ENABLE_LTO), defaulted to ON only on Windows
Change-Id: Iea02b00aac12cc9a62595eeb8ff52382f1c4ddcd
Reviewed-on: https://code.wireshark.org/review/37573
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Libgcrypt enables decryption for so many protocols, be sure to warn
users when their Wireshark build is constrained due to an old version.
Previously a user on Ubuntu 16.04 was surprised that QUIC decryption did
not work even though the "minimum required" version was satisfied:
Found GCRYPT: /usr/lib/x86_64-linux-gnu/libgcrypt.so (found suitable
version "1.6.4", minimum required is "1.4.2")
Change-Id: Ief927b8892a6be9f994bdc65619a1236ca2f4fa7
Reviewed-on: https://code.wireshark.org/review/37552
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
pcapng has been the compile-time default since 2011. If there are any
users who would like to use the libpcap format, then they should use
runtime options instead (e.g. `tshark -P` or `editcap -F pcap`).
Change-Id: I54b70368cdc3ca78bc8617bc488cc687740a1eb9
Reviewed-on: https://code.wireshark.org/review/36721
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <gharris@sonic.net>
Beginning in Wireshark 3.2, the FindGLIB2 cmake module depends on FindWSLibrary
(see 990e409273), so FindWSLibrary needs to be installed as well, or
attempting to build an out-of-tree plugin fails.
Simple example CMakeLists.txt:
cmake_minimum_required(VERSION 2.8)
project(myplugin)
find_package(Wireshark)
LIST(APPEND CMAKE_MODULE_PATH "${Wireshark_LIB_DIR}/wireshark/cmake")
find_package(GLIB2)
Fails:
-- Checking for one of the modules 'glib-2.0'
CMake Error at /usr/local/lib/wireshark/cmake/FindGLIB2.cmake:49 (include):
include could not find load file:
FindWSLibrary
Call Stack (most recent call first):
CMakeLists.txt:5 (find_package)
CMake Error at /usr/local/lib/wireshark/cmake/FindGLIB2.cmake:50 (FindWSLibrary):
Unknown CMake command "FindWSLibrary".
Call Stack (most recent call first):
CMakeLists.txt:5 (find_package)
-- Configuring incomplete, errors occurred!
Change-Id: Id765d671e74fe15a60add38b95e62536abf60a79
Reviewed-on: https://code.wireshark.org/review/36509
Reviewed-by: João Valverde <j@v6e.pt>
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add software_update_info() to the software update module, which returns
the name of our update library if we have one. Use it to add automatic
update information to the compiled information in `wireshark --version`.
Add a "release" test suite, which contains a test for automatic updates.
Ping-Bug: 16381
Change-Id: I867a96bdcfde8be541eca2dc0e84b5000276e7dd
Reviewed-on: https://code.wireshark.org/review/36107
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The feature is Linux-specific, do not suggest an unavailable feature on
macOS and other systems.
Change-Id: If53989749f571ace7397e288e9c06e357d0a96b2
Reviewed-on: https://code.wireshark.org/review/35985
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
At runtime, the Qt5Svg library is required for displaying language icons
at Preferences. Without this library, these icons will be invisible.
However this does not require a build-time check, so remove it.
Change-Id: I5aaf0282f941513c5e867d8591ddf1916aa408bc
Reviewed-on: https://code.wireshark.org/review/35856
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It is possible to decode iLBC payload. It uses libilbc library (https://github.com/TimothyGu/libilbc).
Bug: 16314
Change-Id: Id4cad7ae32305a0e94ef32beb24e07733d7f834e
Reviewed-on: https://code.wireshark.org/review/35686
Reviewed-by: João Valverde <j@v6e.pt>
Petri-Dish: Pascal Quantin <pascal@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
ld: CMakeFiles/tfshark.dir/ui/cli/tap-icmpstat.c.o: undefined reference to
symbol 'sqrt@@GLIBC_2.2.5'
Change-Id: Ifbf49ba00a4246e68c1d3965f0257eca1b4e3ef8
Reviewed-on: https://code.wireshark.org/review/35854
Petri-Dish: Graham Bloice <graham.bloice@trihedral.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Set our file permissions before building the wsar_html_zip target.
Change-Id: I660bf87891a0c8bbebfd497984617bd1d294bf10
Reviewed-on: https://code.wireshark.org/review/35685
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
CMake is unable to find PCAP and WinSparkle under Windows
when using case sensitive folders.
Change-Id: I30ba4073afc6089b08cef3c010b09c257362929b
Reviewed-on: https://code.wireshark.org/review/35505
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We run `windeployqt ... --pdbs` at build time, which means that we need
to be careful not to include them in the NSIS package. Switch from using
wildcards ("File ...\*") to using separate "File" commands for each file.
Simplify the PDB Zip package command while we're here.
Bug: 16307
Change-Id: Ibd9bcbdfdc216f1f6a067baf711bbc184845143f
Reviewed-on: https://code.wireshark.org/review/35670
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The pkgbuild man page doesn't really discuss file permissions[1], but it
appears that it simply preserves them. Make sure the ChmodBPF and
path_helper roots have the correct permssions before building their
respective installers.
[1] The --ownership flag description mentions chmod but that appears to
be a typo.
Bug: 16284
Change-Id: I5ef277539a5b2015394ae3e722ef4c176f9c243f
Reviewed-on: https://code.wireshark.org/review/35507
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Run osx-extras.sh before building the ChmodBPF installer package.
Change-Id: Iec3f88da86e48b5aac385369c7e68f23babc4c34
Reviewed-on: https://code.wireshark.org/review/35491
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add macosx/osx-extras.sh, which can be used to sign the ChmodBPF script.
Bug: 15782
Change-Id: I9929dd6db067f8bc1097faac28ab9467f5a89a82
Reviewed-on: https://code.wireshark.org/review/35481
Reviewed-by: Anders Broman <a.broman58@gmail.com>
We used textify.ps1 to ensure that the .txt files in our Windows
installers would render properly in Notepad if the user double-clicked
on them. Newer versions of Windows have a more sane Notepad, so this is
no longer necessary:
https://devblogs.microsoft.com/commandline/extended-eol-in-notepad/
Copy COPYING, NEWS, README.md, and README.windows once.
Update README.windows.
Change-Id: Ibb8b749725f13e0e49d2a2abe04603d9f2be7960
Reviewed-on: https://code.wireshark.org/review/35470
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Although c-ares support was techically optional, it was either on by
default or required in all of our packaging. Go ahead and require it
globally. C-ares is widely available and synchronous name resolution can
easily result in a horrific user experience.
Change-Id: Id67c797316ed6b8a0ab5052e55a43a1b9e2a2464
Reviewed-on: https://code.wireshark.org/review/35188
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Set or clear SPARKLE_LIBRARIES and SPARKLE_INCLUDE_DIRS in
FindSparkle.cmake, similar to what we do in other modules. Use them
instead of SPARKLE_LIBRARY and SPARKLE_INCLUDE_DIR.
Change-Id: I023c711edd6a44421aadf85413da3207d9b08e64
Reviewed-on: https://code.wireshark.org/review/35097
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Add support for automatic updates using the Sparkle framework. Add
FindSparkle.cmake and associated CMake plumbing. Add a public key and
other info to Info.plist.in. Add ui/macosx/sparkle_bridge.{h,m}, which
wraps the Sparkle API. Make code that's specific to WinSparkle
Windows-only.
Add Sparkle installation steps to the macos-setup scripts. Sparkle
prints a warning if your bundle is unsigned (which is the case during
development) so disable installing it by default.
Updating here takes a long time. We might be able to fix that by
shipping our DSYMs separately.
Change-Id: I6cc6671db5657dadc514bda6bf6e1c8bbc9468a5
Reviewed-on: https://code.wireshark.org/review/35090
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
It looks like HAVE_SYS_TYPES_H, HAVE_STDINT_H, and HAVE_STDDEF_H were
required for check_type_size via test_big_endian, but we don't use that
any more.
HAVE_LRINT was used by the GTK+ UI.
Change-Id: I6474c118bac4413791b3613d34d263e38107600a
Reviewed-on: https://code.wireshark.org/review/34754
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This reverts commit f1285fcf06.
NSIS package is broken with this commit.
Change-Id: Ief22a308edad188fa2d5fab79355f19493359fa6
Reviewed-on: https://code.wireshark.org/review/34758
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
HTML docs are installed to both $docdir and $pkgdatadir. Fix that
to install to $docdir only.
Change-Id: I115158585b6df9170d9a01249adbc8548df91f14
Reviewed-on: https://code.wireshark.org/review/34640
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Default startup project to wireshark instead of ALL_BUILD.
Change-Id: I4694660eba95cd05012f09aa062d923e6c7500d8
Reviewed-on: https://code.wireshark.org/review/34513
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This prevents the mix of debug/release Universal CRT library in a Wireshark.
Bug: 16030
Change-Id: I2961541824caf3bef0a08c72b242427b5406a9bd
Reviewed-on: https://code.wireshark.org/review/34444
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Pascal Quantin <pascal@wireshark.org>
Accept foo_ROOT CMake and environment variables to influence
the search path for find_package(foo).
See https://cmake.org/cmake/help/v3.15/policy/CMP0074.html
Change-Id: Ifa70fbc37a9d7a6da15eda4474d08fe45a1724ad
Reviewed-on: https://code.wireshark.org/review/34636
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add osx-dmg.sh back and make it a simple wrapper around dmgbuild and
codesign.
Change-Id: I0baa21fd971aa1b06e1a6700881cd7625dffff35
Reviewed-on: https://code.wireshark.org/review/34629
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Scripting the Finder in order to lay out our disk image assumes that we
have access to the Finder. This might not be the case on our builder,
and it arguably shoudn't be.
Switch from using a Bash script + AppleScript to build and lay out our
.dmg to using dmgbuild, which creates our .DS_Store directly using
Python's ds_store module.
Change-Id: I2e4a9dd89bc8297c9cbd9df7aa8d3a44447bde85
Reviewed-on: https://code.wireshark.org/review/34623
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Create ChmodBPF installer and uninstaller packages using pkgbuild and
productbuild. Place them in Wireshark.app/Resources/Extras.
Add a path_helper installer and uninstaller which respectively add and
remove /etc/*paths.d/Wireshark.
Remove the PackageMaker and utility-launcher assets and build targets.
Show a message in the main welcome screen if we don't have capture
permissions. Add an link which launches the ChmodBPF installer.
Add a "macOS Extras" item to About → Folders.
Migrate "Read me first" from RTF to Asciidoctor, which lets us add links
and looks like our other documentation.
Rename dmg_set_style.scpt to arrange_dmg.applescript and make it plain
text. Always run it in osx-dmg.sh.
Bug: 6991
Bug: 12593
Bug: 11399
Ping-Bug: 16074
Change-Id: I7b6aa89aae2be522b4141b0d44e8142dec749e90
Reviewed-on: https://code.wireshark.org/review/31047
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Provide _U_ macro definition for Visual Studio.
Change the way _U_ macro is ifdefed for some targets to allow Visual
Studio to recognize it.
Ping-Bug: 15832
Change-Id: Ic7ce145cbe9e8aa751d64c9c09ce8ba6c1bbbd30
Reviewed-on: https://code.wireshark.org/review/34530
Tested-by: Petri Dish Buildbot
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
The variables BUILD_dumpcap and PCAP_FOUND are defined after the if
condition, therefore wireshark is built with a relative RPATH and
library loading for privileged processes fails with glibc.
Move the definition of BUILD_dumpcap before it is used and drop
the test for PCAP_FOUND.
Move a comment to the proper line while at it.
Change-Id: Ie151a3781898e712f9e324e9ef995022bbea40b6
Reviewed-on: https://code.wireshark.org/review/34564
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Instead of checking for CMake version greater than "3.13.999" check for
version lower than "3.14". This fixes the condition for current Pengwin
releases which do ship with CMake version "3.13.18112701-MSVC_2".
Change-Id: Ib5fc494d7fd42625e24ddac55af8aa92f0e983ec
Reviewed-on: https://code.wireshark.org/review/34535
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
That means the packet-count-during-capture stuff is scattered amongst
fewer locations.
Move capture_info.h into ui; it's now a header that declares routines
whose implementations are GUI-platform-dependent.
Change-Id: I475815724a4766f6bc2511e67ebae14865e1a9d1
Reviewed-on: https://code.wireshark.org/review/26249
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
The APIs used in the kafka dissector have been introduced in version
1.0.0, then we need at least that version to work.
Change-Id: I80ded2362d4f324ec26392bd7a9781ea6d9ba630
Reviewed-on: https://code.wireshark.org/review/34382
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The default VCSVERSION from make-version.pl is based on the "git
archive" information (for tarballs) or uses "git describe" to discover
the version. Distributors such as Debian who directly build from a Git
repository might want to include a deterministic value, therefore add a
new option to achieve this.
Change-Id: I5a39670519f4d846020d917b124fc4d548d00137
Reviewed-on: https://code.wireshark.org/review/34100
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It's broken, unmaintained, poorly implemented and obsoleted by saner
debug-info methods.
Note: To do the compliance check properly would require much more
extensive work to clearly define public and private interfaces (without
manual bookeeping of files or symbols either, of course, because who
would want that...).
Change-Id: Ib801f3c152ca2369f95ca1f4af4d37cd8cc7c47a
Reviewed-on: https://code.wireshark.org/review/33928
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: João Valverde <j@v6e.pt>
Allow easy import of profiles. Profiles must be stored inside
a zip file, with no additional hierarchy.
Change-Id: I0ae77460c20ef6b3e447906e671b0cefa6b9b032
Reviewed-on: https://code.wireshark.org/review/33881
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
This new tap collects credentials (username and paassword)
from the dissectors.
So far, few dissectors have been instrumented:
- http (basic auth)
- http (header auth)
- ftp
Others can be instrumented as well using the same technique.
Tshark has a new option (-z credentials) and Wireshark a new
"tools" menu: the documentation has been updated accordingly.
Change-Id: I2d0d96598c85bb3ea4fb5ec090dd8dc28b481fc9
Reviewed-on: https://code.wireshark.org/review/33453
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Dario Lombardo <lomato@gmail.com>
When builing without the Speex library the build inserts its own files
to handle the codec conversion. These however require sharkd to be
linked against libm, for the sine function.
Change-Id: I80b3fd67a346849480976c00280537b786780627
Reviewed-on: https://code.wireshark.org/review/33582
Reviewed-by: Vasil Velichkov <vvvelichkov@gmail.com>
Petri-Dish: Jaap Keuter <jaap.keuter@xs4all.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
By providing such a file, we give the users a basic toolbox
of macros. At the moment 3 macros have been added, for private
mac addresses, as well al IP v4 and v6.
Change-Id: Icc33efce437adef00e268172c184c8b52167df23
Reviewed-on: https://code.wireshark.org/review/33449
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
On macOS, <build directory>/run/wireshark is a wrapper script that execs
run/Wireshark.app/Contents/MacOS/Wireshark so that Launch Services will
activate our application properly. We don't need to worry about this for
our other executables. Make them symlinks so that we can run things like
`lldb run/tshark` with impunity.
Change-Id: I4e656d778040ece722f873b1a7f6e6e60d21e2a6
Reviewed-on: https://code.wireshark.org/review/33071
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Or, rather, *disable* it only if we're *not* enabling additional
compiler warnings.
Change-Id: I95c23385a365e0e24f932ea5c680b287b5f717e0
Reviewed-on: https://code.wireshark.org/review/33237
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I5326b87784817fb353329e2d686fe0515c32f6cb
Reviewed-on: https://code.wireshark.org/review/33038
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: João Valverde <j@v6e.pt>
Change-Id: I8443379d23a2946dd21c12e5e0bd5464ab73ca25
Reviewed-on: https://code.wireshark.org/review/31857
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Make sure we link each application that calls WSAStartup with ws2_32.lib.
Pass version 2.2 to WSAStartup. Wikipedia says it was introduced in 1996,
so we should be OK.
Ping-Bug: 15711
Change-Id: I431839e930e7c646669af7373789640b5180ec28
Reviewed-on: https://code.wireshark.org/review/33033
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Tomasz Moń <desowin@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
USE_STATIC will:
- always link statically with external libraries (such as glib2)
- will not set rpath to avoid the following error:
CMake Error at cmake_install.cmake:50 (file):
file RPATH_CHANGE could not write new RPATH:
/usr/lib
to the file:
/home/fabrice/br-test-pkg/br-arm-full-static/target/usr/bin/tshark
No valid ELF RPATH or RUNPATH entry exists in the file;
Change-Id: I242dc1a091cc211ee891568a2dee5080c9974fba
Ping-Bug: 15713
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-on: https://code.wireshark.org/review/32945
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
CLEAN_C_FILES is empty if all BUILD_xxx options are disabled.
Bug: 15662
Change-Id: I133b4d00336eb17f7eaeb0d6517ed83c30180373
Reviewed-on: https://code.wireshark.org/review/32895
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Clang does not implement this option, so do not bother checking it
there. GCC 6 is fine, GCC 7 is broken and GCC 8 is fixed again.
Change-Id: I3bc9ff4e934e05b1b3ce7d4c4a41bf40d6e38655
Reviewed-on: https://code.wireshark.org/review/32904
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Require glibconfig.h to be found and extract the version from this file,
this has been present since the original GLib commit and is still
present in the meson build system introduced with 2.53.4.
Bug: 15706
Change-Id: I2e938a339d48d6815ed7cc46462735b93418377f
Reviewed-on: https://code.wireshark.org/review/32894
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Update the Windows build environment to use lz4 packages built from a
VS 2017 command prompt with
set LZ4_VERSION=1.8.3
vcpkg remove lz4:x86-windows lz4:x64-windows
vcpkg install lz4:x86-windows lz4:x64-windows
vcpkg export lz4:x86-windows --output=lz4-%LZ4_VERSION%-win32ws --zip
vcpkg export lz4:x64-windows --output=lz4-%LZ4_VERSION%-win64ws --zip
The packages also include a PDB, so copy it to the build directory and
add it to the PDB .zip.
Change-Id: Icea512405d2085e5b271fa4a3ba8c0fe318b8cb5
Reviewed-on: https://code.wireshark.org/review/32785
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Require the POD package. Some platforms ship POD translators as a
separate package instead of shipping them with Perl.
Bug: 15513
Change-Id: Ie277f9296d06063581512bc4c2df1d3158117f2c
Reviewed-on: https://code.wireshark.org/review/32685
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
We know the native Windows library path early on in the configure
process. Use it to set the location of the Npcap and USBPcap installers
instead of trying to derive it from the GLib DLL path.
Change-Id: I02d48e115b374fb6080a7fe8017cba789254d5f1
Reviewed-on: https://code.wireshark.org/review/32475
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Create a library bundle using `vcpkg export ... --zip` as described at
https://vcpkg.readthedocs.io/en/latest/users/integration/#export-command.
The bundle includes the following packages:
gettext 0.19-8
glib 2.52.3-13
libffi 3.1-4
libiconv 1.15-5
liblzma 5.2.4
libxml2 2.9.9-4
pcre 8.41-1
zlib 1.2.11-5
It also includes a CMake toolchain file which we might want to make use
of in the future.
This means we no longer compile Zlib locally. Update the CMake environment
accordingly and remove zlib from win-setup.ps1.
It includes PDBs, so add them to the PDB .zip.
Change-Id: I0a94904a86d836e990019dab62af506573be1f35
Reviewed-on: https://code.wireshark.org/review/31377
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This feature was removed in v2.5.1rc0-427-gf529ab5d0a, anticipating that
MaxMind would remove support for it in 2019. They have however changed
their mind and maintained latitude and longitude information.
They recommend displaying an accuracy radius, but the reported values
are 50, 100, 200 and 1000km. When implemented literally, a marker in
Ireland would cover the whole island plus mainland, so I have instead
opted to use a fixed radius of 1km at deeper zoom levels.
The old ipmap.html file was outdated and had broken tiles, I rewrote a
new one from scratch using the light-weight Leaflet library combined
with tiles from OpenStreetMap. This is more mobile-friendly and secure
(https, SRI). To improve handling of nearby or overlapping nodes,
clustering is used (individual nodes can still be inspected).
Browser compatibility results: IE8 is unusable, IE9 partially works
(tooltips sometimes disappear and the cluster radius control is gone),
IE11 works. Of course Firefox 65 and Chromium 72 have no issues.
The map popup description in the generated GeoJSON structure is now
split in several properties, allowing presentation to be handled by the
HTML page instead of the C code.
Bug: 14693
Change-Id: If2ec9c518f7723ac0ab27b6272463356875a0ff2
Reviewed-on: https://code.wireshark.org/review/31952
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Convert our self-generating FAQ to Asciidoctor via the following steps:
- `help/faq.py > /tmp/faq.html`.
- `pandoc -t asciidoc -o docbook/faq.adoc /tmp/faq.html`.
- Manually clean up the markup using a text editor.
Question and answer content was left intact. Removing or updating
obsolete content will have to be done in a separate change.
The Asciidoctor project uses the .adoc extension, so start using it here
as well.
The contents of the "help" directory appear to have been used for
offline support in help_url.c, but that functionality was removed in
2008 in 242e3b78bc. Its content is covered in the User's Guide and man
pages so remove it.
Change-Id: I9060eefe97cfc137f8b414077c30f814379b576a
Reviewed-on: https://code.wireshark.org/review/32014
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Define PLUGIN_PATH_ID where we use it. ENABLE_APPLICATION_BUNDLE is
defined later on, so test for APPLE instead.
Change-Id: I16c3ac3dc0e483fbf89cb1a2cacb2afb416d656f
Reviewed-on: https://code.wireshark.org/review/32016
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
In CMake we only used PROJECT_RELEASE_VERSION to construct our plugin
path, so rename it to PLUGIN_PATH_ID. Use a dash to separate version
numbers on macOS in order to allow code signing and a period elsewhere.
In the C code we only used VERSION_RELEASE to construct our plugin path,
so rename it to PLUGIN_PATH_ID.
Change-Id: I02abc591d7857269e8d47b414b61df4b28a25f2d
Reviewed-on: https://code.wireshark.org/review/32013
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
dumpcap with capabilities/setuid currently does not start due to missing
libwsutil when installed to a non-standard prefix such as /usr/local.
Bug: 15490
Change-Id: If7427ba9625d3702ab8aac2deeaf37b6d3fda2a0
Reviewed-on: https://code.wireshark.org/review/31995
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>