We don't need it and, if there *is* no pcap.h header, because the pcap
headers aren't installed, it won't compile.
Bug: 15317
Change-Id: Ie2a107f6117aad8f87943cd72269211f13b71142
Reviewed-on: https://code.wireshark.org/review/30883
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The key for the manuf table is 24 bits of the ether addr while the key
for services table needs is a 16 bit port. Store this value directly,
saving some memory and improving startup time by a tiny bit.
Likewise for ipxnet_hash_table and vlan_hash_table. These tables seem
unused though, perhaps it should be removed.
Change-Id: Ide9ffad8e2c9af24afa82adb2e009f32a5f43d38
Reviewed-on: https://code.wireshark.org/review/30756
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Use the libwiretap APIs to get lists of all compressed file suffixes or
to get the compressed file suffix for a given compression type.
(The net effect is the same, as the only compression type supported is
gzip, but if any compression types are added in the future, that code
won't need to be changed.)
Change-Id: I7de3b764604d50c4c60b6f20dd16ee87fc00e5b2
Reviewed-on: https://code.wireshark.org/review/30734
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Move all the compressed-file type stuff to wiretap/file_wrappers.c.
Rename wtap_compressed_file_extension() to
wtap_compression_type_extension() for consistency with the other
compression-type-extension routine names.
Move the declarations of the compression-type-extension routines in the
header file.
wtap_compression_type_extension() now returns NULL for
WTAP_UNCOMPRESSED; there's no need to special-case it.
Get rid of the now-unused wtap_compression_type_supported() and
WTAP_NUM_COMPRESSION_TYPES.
Change-Id: Ib93874079bea669a0c87104513dba0d21390455a
Reviewed-on: https://code.wireshark.org/review/30729
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It *should* never happen, but just make sure of that by calling it only
for "open for writing" ("save") dialogs.
Change-Id: I1813f31537c0aa4efdf08c1622db9cb9e7f5ae83
Reviewed-on: https://code.wireshark.org/review/30726
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add wtap_compressed_file_extension(), which returns NULL for
WTAP_UNCOMPRESSED and the appropriate file extension for other
compression types.
Add wtap_compression_type_supported(), which returns TRUE for
WTAP_UNCOMPRESSED and all supported compression types and FALSE
otherwise. ("Supported" means "the code can decompmress files in that
compression format and can write files in that compression format", so
WTAP_GAIP_COMPRESSED is supported iff libwiretap is built with zlib.)
In MainWindow::fileAddExtension, instead of checking for
WTAP_GZIP_COMPRESSED and using ".gz" as the extension, use the extension
returned by wtap_compressed_file_extension() for the compression type.
Change-Id: I47cb0eca8c887ada3562df30b54e76509008180f
Reviewed-on: https://code.wireshark.org/review/30707
Reviewed-by: Guy Harris <guy@alum.mit.edu>
compressed_file_extension shouldn't include the ".", as we insert the
"." before it.
Use it when appending the extension, rather than hardwiring "gz" in two
places.
Change-Id: I89e3ed1df9a8457fdbb6e6386686176816f4671b
Reviewed-on: https://code.wireshark.org/review/30682
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
If the file is to be compressed, then:
if the type in which the file is to be written has a set of extensions
it uses, leave the file name alone if it ends with one of those
extensions followed by the extension for the compression type,
otherwise append the default extension for that file type followed by
the extension for the compression type;
if it doesn't, leave the file name alone if it ends with the extension
for the compression type, otherwise append the extension for the
compression type;
otherwise:
if the type in which the file is to be written has a set of extensions
it uses, leave the file name alone if it ends with one of those
extensions, otherwise append the default extension for that file type followed by
the extension for the compression type;
if it doesn't, leave the file name alone if it ends with the extension
for the compression type, otherwise append the extension for the
compression type.
Change-Id: I7c4093af28cc30d579a2ae9faa8f4164b4764001
Reviewed-on: https://code.wireshark.org/review/30681
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I08d45c87c9232edcabfc69d25a773552fe9e0871
Fixes: v2.9.0rc0-2567-g43872a3a0e (""." in version numbers and file names isn't translated into other languages.")
Reviewed-on: https://code.wireshark.org/review/30680
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
"xxx.pcap.gz" is "xxx.pcap.gz" in any language. "3.0.1" is "3.0.1" in
any language.
Change-Id: I231a3f9bd21a3ea5d56a8e410d20b1bc3927540f
Reviewed-on: https://code.wireshark.org/review/30676
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: Iabdd87128a2af8c668c0602ea677f71984e64723
Fixes: v2.9.0rc0-2556-gb894c53d5e ("Add an API to get a description of a compression type, and use it.")
Reviewed-on: https://code.wireshark.org/review/30670
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add wtap_compression_type_description(), which returns NULL for
WTAP_UNCOMPRESSED and a descriptive string for other compression types.
Instead of checking for WTAP_GZIP_COMPRESSED and appending "(gzip
compressed)", just pass the compression type to
wtap_compression_type_description() and, if the result is non-null,
append its result, wrapped in parentheses, with a space before the left
parenthesis.
Change-Id: I79a999c7838a883953795d5cbab009966e14b65e
Reviewed-on: https://code.wireshark.org/review/30666
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This:
1) means that we don't have to flag the compression argument with a
comment to indicate what it means (FALSE doesn't obviously say "not
compressed", WTAP_UNCOMPRESSED does);
2) leaves space in the interfaces in question for additional compression
types.
(No, this is not part 1 of an implementation of additional compression
types, it's just an API cleanup. Implementing additional compression
types involves significant work in libwiretap, as well as UI changes to
replace "compress the file" checkboxes with something to indicate *how*
to compress the file, or to always use some other form of compression).
Change-Id: I1d23dc720be10158e6b34f97baa247ba8a537abf
Reviewed-on: https://code.wireshark.org/review/30660
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Use it for all the per-file information, including the per-file
link-layer type and the per-file snapshot length.
Change-Id: Id75687c7faa6418a2bfcf7f8198206a9f95db629
Reviewed-on: https://code.wireshark.org/review/30616
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Error:
../ui/alert_box.c: In function ‘cfile_write_failure_alert_box’:
../ui/alert_box.c:359:13: error: this statement may fall through [-Werror=implicit-fallthrough=]
simple_error_message_box(
^~~~~~~~~~~~~~~~~~~~~~~~~
"Frame %u%s has a network type that differs from the network type of earlier packets, which isn't supported in a \"%s\" file.",
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
framenum, in_file_string,
~~~~~~~~~~~~~~~~~~~~~~~~~
wtap_file_type_subtype_string(file_type_subtype));
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../ui/alert_box.c:364:9: note: here
case WTAP_ERR_PACKET_TOO_LARGE:
^~~~
Change-Id: I55464afff5625ae8c587470e417234560c7e606c
Reviewed-on: https://code.wireshark.org/review/30623
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
If, in the process of opening the input file, we determine that it has
packets of more than one link-layer type, we can catch attempts to write
that file to a file of a format that doesn't support more than one
link-layer type at the time we try to open the output file.
If, however, we don't discover that the file has more than one
link-layer type until we've already created the output file - for
example, if we have a pcapng file with a new IDB, with a different
link-layer type from previous IDBs, after packet blocks for the earlier
interfces - we can't catch that until we try to write the packet.
Currently, that causes the packet's data to be written out as is, so the
output file claims it's of the file's link-layer type, causing programs
reading the file to misdissect the packet.
Report WTAP_ERR_ENCAP_PER_PACKET_UNSUPPORTED on the write attempt
instead, and have a nicer error message for
WTAP_ERR_ENCAP_PER_PACKET_UNSUPPORTED on a write.
Change-Id: Ic41f2e4367cfe5667eb30c88cc6d3bfe422462f6
Reviewed-on: https://code.wireshark.org/review/30617
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Previously 'tshark -z expert' was failing with abort when a packet
contains a comment
- Add a new comment parameter and update the tshark's manual page
- Add a new comment_level severity and change the default lavel to it.
- Add various 'tshark -z expert' tests
Change-Id: I188317da5e00019b8f2b725f0fe84942f774520f
Reviewed-on: https://code.wireshark.org/review/30610
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have the routines always take a parameters pointer; pass either null or
a pointer to an initialized-to-nothing structure in cases where we were
calling the non-_ng versions.
Change-Id: I23b779d87f3fbd29306ebe1df568852be113d3b2
Reviewed-on: https://code.wireshark.org/review/30590
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Four variants of wtap_dump_open_ng exists, each of them take the same
three parameters for the SHB, IDB and NRB blocks that has to be written
before packets are even written. Similarly, a lot of tools always create
these arguments based on an existing capture file session (wth).
Address the former duplication by creating a new data structure to hold
the arguments. Address the second issue by creating new helper functions
to initialize the parameters based on a wth. This refactoring should
make it easier to add the new Decryption Secrets Block (DSB).
No functional change intended.
Change-Id: I42c019dc1d48a476773459212ca213de91a55684
Reviewed-on: https://code.wireshark.org/review/30578
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Remove "Export SSL Session Keys", "Import/Export Color Filters" and
"Export Raw Bytes" dialogs. These were only used by GTK+ as Qt has its
own implementation.
Change-Id: I0520a0f6e35d0f8a55c58e77f89c5229393c2b23
Reviewed-on: https://code.wireshark.org/review/30559
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add the ability to rotate files after a specified number of packets (`-b
packets:NUM`). Move some condition checks to capture_loop_write_packet_cb.
Add `-a packets:NUM` in order to be consistent. It is functionally
equivalent to the `-c` flag.
Add a corresponding "packets" option to the Capture Interfaces dialog
Output tab.
Add initial tests for autostop and ringbuffer conditions.
Change-Id: I66eb968927ed287deb8edb96db96d7c73526c257
Reviewed-on: https://code.wireshark.org/review/30534
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Fix the build for displaying the tabs wrongly on mac
Change-Id: I58265b7cf9a4758885ef1add13417c42a467be9d
Reviewed-on: https://code.wireshark.org/review/30462
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
To mimic the behaviour we have with remote controls, we
hide the wireless toolbar if it cannot be used, instead
of displaying an empty toolbar with the information that
it is not supported
Change-Id: Iccb0bf78a29a2547adf2290198df8a1bf3450d82
Reviewed-on: https://code.wireshark.org/review/30455
Petri-Dish: Roland Knall <rknall@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Roland Knall <rknall@gmail.com>
Change-Id: I9d81bda8a33c7a07118e8aff2917215c92e870f4
Reviewed-on: https://code.wireshark.org/review/30436
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
When importing a file from hex dump, this change adds a way to
add a custom dummy header. It's an export_pdu header which uses
one single tag: the protocol name. This allows to call directly
a dissector without more dummy headers.
Example: it can be used to call the DNS dissector without fake
eth/ip/udp headers.
Change-Id: I12fd6d09a131acd9bd1f0d7c4c8aefcd0d718b26
Reviewed-on: https://code.wireshark.org/review/30403
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Follow the logic in tools/generate_authors.pl for matching the
Acknowledgements section (which looks for a substring match instead of a
literal string.
Change-Id: I42e1553b6820af3fb2d5b9cda0fa0e6e6ca7e729
Reviewed-on: https://code.wireshark.org/review/30432
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add prefix and postfix "=" to satisfy text splitter to avoid empty text area.
Change-Id: I3c8e4fd4711ea8fcc7bba9583ff3fe5cb06ce4a1
Reviewed-on: https://code.wireshark.org/review/30428
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Change-Id: I5e9025545f9127d1c5c6200844f9b917af975998
Reviewed-on: https://code.wireshark.org/review/28844
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Avoid assuming an export object's row number is consistent throughout,
because the row number can change if the display is filtered or sorted.
Instead, look up the index in the model with mapToSource().
Bug: 14545
Change-Id: I61099dfb4f3abc056417eb7d6ffbc7a988553dd8
Reviewed-on: https://code.wireshark.org/review/30388
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add a preference (enabled by default) that can enable/disable the ability for Wireshark to autocomplete display and capture filter controls.
Bug: 14368
Change-Id: Ib2b688bb75c4465dab14a6a635a870d7e5c4fe80
Reviewed-on: https://code.wireshark.org/review/30320
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Opening the Follow TCP Stream dialog triggers redissection and ended up
triggering a "first <= rowCount(parent)" assertion failure. Fix the
first and end arguments to reflect the actual number of displayed rows.
Bug: 15014
Change-Id: Ic07834948a133bea752e45751ebe8be2da98a35e
Reviewed-on: https://code.wireshark.org/review/30302
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
Register the follow_free as a finish callback.
Call the tap's finish callback in free_tap_listener which is called from
both remove_tap_listener and tap_cleanup.
Describe the finish callback in README.tapping
Change-Id: Ie79ce8f39b0ca6d84810d2e3307dcff38b18d3ac
Reviewed-on: https://code.wireshark.org/review/29309
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Michael Mann <mmann78@netscape.net>
The purpose of this function is to check if a configuration file exists
and has at least one entry which is not a comment.
Use this when building the list of profiles where the user can copy
configuration from, to avoid listing profiles with empty files or files
with only comments.
Change-Id: If45f52025959818fb1213ffac488cd59441e9fce
Reviewed-on: https://code.wireshark.org/review/30113
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add the pathLabel for Coloring Rules, Decode As, Display Filters
and Capture Filter. Put the absolute file path into the pathLabel
if the file exists. This aligns with UAT dialogs and frames.
Change-Id: I72bd06e31bab220de0a0ef8df99df9a4daed667c
Reviewed-on: https://code.wireshark.org/review/30089
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add a new button to UAT frames to copy entries from another profile.
Change-Id: I9decb5ed5d67e97388ee7b22a15cacae4d5a3621
Reviewed-on: https://code.wireshark.org/review/30084
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Refactor CopyFromProfile class from Button to Menu to make it
usable for existing buttons, both QPushButton and QToolButton.
Change-Id: I7d23b4225dbe45f961fb05e73dbb4dd51e6f8ea1
Reviewed-on: https://code.wireshark.org/review/30083
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
Add a clear all button to easily remove all existing entries.
Change-Id: I76e7ee2b7b85a9b4e5f9f5a788a89f38f70ee8ce
Reviewed-on: https://code.wireshark.org/review/30052
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Guy Harris