(Using sed : sed -i '/^\* \$Id\$/,+1 d') (no space before star)
Change-Id: I318968db2b8512ba1303b5fc5c624c66441658f0
Reviewed-on: https://code.wireshark.org/review/879
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This plugin implements a dissector for Infiniband. It is released
under the GPL v2.
Rather than using say libpcap to capture raw (unframed) IP packets
from near the top of an IPoIB stack, this plugin dissects link level
Infiniband frames.
Infiniband trace files can be read from Endace ERF format trace
files, or from libpcap DLT_ERF files containing ERF TYPE_INFINIBAND
records. There is currently no native DLT_INFINIBAND in libpcap.
Each record contains a hardware timestamp, capture metadata such as
port Id, and a complete link level Infiniband frame starting from
the Local Route Header.
svn path=/trunk/; revision=24628
This is a replacement of the existing decoding of ERF files (Extensible Record
Format from Endace).
For the decoding of the ERF files, according to the "type of record" given in
the ERF header, several decoders can be used. Up to now, the decoder is
determined according to an environment variable, or with a kind of heuristic.
And, all the treatment is done during the file extraction.
The new architecture, will separate the ERF file decoding, and the ERF record
decoding. The ERF records will be decoded with a specific dissector. This
dissector can be configured with options, to replace the environment variable.
http://bugs.wireshark.org/bugzilla/show_bug.cgi?id=1839
svn path=/trunk/; revision=23092
The code for reading ERF files has not been significantly
updated since 2004. This patch brings it up to date with a
number of changes.
1) Increase number of decodable ERF types from 7 to 12. This
covers newer DAG card models and firmware updates.
2) Fix timestamp conversion. Was calculating only microsecond
precision, now displaying with nanosecond resolution. Hardware
precision is 7.5 to 30 ns depending on model.
3) Allow the user to specify HDLC encapsulation as 'chdlc',
'ppp_serial', 'frelay' or 'mtp2'. This is needed because the
ERF HDLC capture formats do not include information on what
protocol is used at the next level. This is currently done via
an environment variable 'ERF_HDLC_ENCAP' and is analagous to the
existing 'ERF_ATM_ENCAP' variable.
If the user does not specify an HDLC encapsulation it tries to
guess, and falls back to MTP2 for backwards compatibility with
Florent's existing behaviour.
I know environment variables are ugly, suggestions are welcome.
4) When reading HDLC captures as MTP2, use
WTAP_ENCAP_MTP2_WITH_PHDR rather than WTAP_ENCAP_MTP2. This
allows us to put the 'Multi-Channel ERF' record 'channel
number' field into the MTP2 pseudo header > 'link_number'
field. This is then displayed in Frame information, and can
be filtered on. (Would be nice if it could be made a display
column?)
Because the ERF record does not specify whether Annex A is used
or not, we pass MTP2_ANNEX_A_USED_UNKNOWN and allow the existing
user preference to decide.
Move the MTP2_ANNEX_A_ definitions into Wiretap, make the annex_a_used
field a guint8, and change MTP2_ANNEX_A_USED_UNKNOWN to 2 so it fits in
a guint8. (This means that if you can save an ERF MTP2 file as a
libpcap file, the pseudo-header will have MTP2_ANNEX_A_USED_UNKNOWN in
it.)
svn path=/trunk/; revision=22067
G_HAVE_GINT64.
Get rid of the floating-point stuff in the Etherpeek Classic file
reading code, just use 64-bit integers. Fix up the calculation of the
nanoseconds portion of the time stamp.
svn path=/trunk/; revision=15544
they have LF at the end of the line on UN*X and CR/LF on Windows;
hopefully this means that if a CR/LF version is checked in on Windows,
the CRs will be stripped so that they show up only when checked out on
Windows, not on UN*X.
svn path=/trunk/; revision=11400
addition to an error code, an error info string, for
WTAP_ERR_UNSUPPORTED, WTAP_ERR_UNSUPPORTED_ENCAP, and
WTAP_ERR_BAD_RECORD errors. Replace the error messages logged with
"g_message()" for those errors with g_strdup()ed or g_strdup_printf()ed
strings returned as the error info string, and change the callers of
those routines to, for those errors, put the info string into the
printed message or alert box for the error.
Add messages for cases where those errors were returned without printing
an additional message.
Nobody uses the error code from "cf_read()" - "cf_read()" puts up the
alert box itself for failures; get rid of the error code, so it just
returns a success/failure indication.
Rename "file_read_error_message()" to "cf_read_error_message()", as it
handles read errors from Wiretap, and have it take an error info string
as an argument. (That handles a lot of the work of putting the info
string into the error message.)
Make some variables in "ascend-grammar.y" static.
Check the return value of "erf_read_header()" in "erf_seek_read()".
Get rid of an unused #define in "i4btrace.c".
svn path=/trunk/; revision=9852
Alexis La Goutte