Convert wiretap/ascend.y.in from Bison/YACC to Lemon and rename it to
wiretap/ascend_parser.lemon. Tighten up some of our scanning and
parsing. Make the indentation in it and related files consistent. Aside
from the recent IPv4 fragment offset changes, this produces identical
output to the 3.4 branch for the Ascend trace files I have here.
Remove the comment about supporting other commands. Another timeline
might have an Ascend that successfully pivoted to DSL or 15625B+1D
gigabit ISDN, but this one has neither.
This was our last/only Bison/YACC file, so remove Bison/YACC as a
development and packaging dependency and remove references to it from
the documentation.
Remove the --check-addtext and --build flags. They were used for
checkAddTextCalls, which was removed in e2735ecfdd.
Add the sources in ui/qt except for qcustomplot.{cpp,h}. Fix issues in
main.cpp, rtp_audio_stream.cpp, and wireshark_zip_helper.cpp.
Rename "index"es in packet-usb-hid.c.
Allows opening MP4 (ISO/IEC 14496-12) media files in Wireshark and
viewing their structure.
Change-Id: Ie20b8b89dc69bb52d6faa890e547d90317adecf6
Reviewed-on: https://code.wireshark.org/review/35804
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Only CAN protocol is supported. Extra information available in J1939
entries is ignored since the J1939 wireshark dissector works with
raw CAN frames and makes no use of this extra information.
The log format may also encapsulate LIN messages which are not
supported by wireshark and thus are ignored.
The only limitation is that relative timestamp format is not
supported. If a file defines relative format of timestamps, packets
are extracted, but timestamps are omitted, since random access deems
impossible without reparsing the whole file up to the packet of
interest. In order to support relative timestamps we need to parse
the whole file at once on open and either dump into a temporary
PCAP file or keep messages in a private list and provide access
to them on read()/seek_read().
The change also creates a separate header for CAN frame structure
definitions which are used by several file readers (candump and
busmaster for now).
Bug: 15939
Change-Id: I87c5555e4e5e1b142b9984b24544b2591d494fbc
Reviewed-on: https://code.wireshark.org/review/34083
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
It's broken, unmaintained, poorly implemented and obsoleted by saner
debug-info methods.
Note: To do the compliance check properly would require much more
extensive work to clearly define public and private interfaces (without
manual bookeeping of files or symbols either, of course, because who
would want that...).
Change-Id: Ib801f3c152ca2369f95ca1f4af4d37cd8cc7c47a
Reviewed-on: https://code.wireshark.org/review/33928
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: João Valverde <j@v6e.pt>
The change adds ability to import text logs produced by the candump
tool.
E.g.: candump -L can0 -or- candump -l can0
The whole file is read and converted into a temporary PCAPNG file with
Exported PDU packets containing SocketCAN frames.
Bug: 15889
Change-Id: I5ad93dca96d6e955a4b21cf624f0553e60f060f6
Reviewed-on: https://code.wireshark.org/review/33800
Petri-Dish: Jim Young <jim.young.ws@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
User guides are installed to doc/Wireshark. Use doc/wireshark instead.
Remove leftover variable CPACK_PACKAGE_NAME.
Change-Id: I9a1d6bdc7d8f0b48c61e43679285d5ba83904a63
Reviewed-on: https://code.wireshark.org/review/31851
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Instead of using "$ORIGIN/../lib" just use "$ORIGIN".
Also be explicit in configuring the relative RPATH. We don't want
to assume a default relative path, in case more targets are addded,
out of caution.
Change-Id: I3b7f5e8de7be8bb30aca3b433212113d876c4163
Reviewed-on: https://code.wireshark.org/review/31647
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
This is more explicit and easier to read with slightly better locality
while using less code.
Also less awkward when the package doesn't fit the narrow package list
expectations.
The ws_find_package() macro doesn't include all the status messages. The
choice was to rely on standard find_package() and feature_summary() output
and be less verbose.
Avoid polluting the CLI build interface. Per target include paths and
macro definitions are preferred.
Because this patch intentionally removes the global CMAKE_*_FLAGS
and include_directories() usage in favor of target properties, some
untested build configurations may inadvertently break because of
missing ${PACKAGE}_INCLUDE_DIRS or ${PACKAGE}_DEFINITIONS. This
required a manual review of dependencies that might have been
incomplete.
${PACKAGE_VAR}_LINK_FLAGS seems to be unused.
Changing the CMake Qt code to use more modern CMake component syntax
is left as future work.
Change-Id: I3ed75252189a6e05a23ed6e619088f519cd7ed78
Reviewed-on: https://code.wireshark.org/review/31496
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Avoid including the precise version string in the pcapng file that is
created for 3GPP TS 32.423 formats. This avoids unnecessarily relinking
of applications depending on wiretap.
Change-Id: Ida1f3c0c998d811cbf85734bd83438bcbfc39cf4
Reviewed-on: https://code.wireshark.org/review/31513
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: João Valverde <j@v6e.pt>
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Some source files are duplicated via add_executable. Assuming that these
are not affected by target-specific preprocessor macros, they can be
built only once and shared among executables.
In one configuration, this reduces the number of object files by 55
(cli_main.c and version_info.c alone were built 15 times each).
Removes the version dependency from each target since the 'version_info'
target can now declare this dependency. Remove CLEAN_C_FILES from extcap
since it is not used to set -Werror. Due to removing some files from
wireshark_FILES (and others), these are no longer part of checkAPIs
though. Hopefully that is acceptable.
Change-Id: I0a3f1ffb950e70a6176c96d867f694fbc6476f58
Reviewed-on: https://code.wireshark.org/review/31509
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Petri-Dish: João Valverde <j@v6e.pt>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Setting LIBRARY_OUTPUT_DIRECTORY to Wireshark.app/Contents/Frameworks
for each of our libraries ends up installing a fully versioned .dylib
along with soversion and unversioned symlinks, which is more than we
want and which wastes disk space when osx-app.sh dsymifies our
libraries.
Leave LIBRARY_OUTPUT_DIRECTORY unset and depend on osx-app.sh to copy
our libraries into place.
Bug: 15361
Change-Id: If0fbaa796b4be806e2aa13887e511a330fe55df5
Reviewed-on: https://code.wireshark.org/review/31139
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
libwireshark and libwiretap have their INTERFACE link dependencies
changed to the required set.
libwsutil keeps a default public visibility. Further work may
show some unneeded link requirements.
The executable dependencies are adjusted accordingly.
Change-Id: I3a534f72403819cac136ae47a3d80acee76e0fb3
Reviewed-on: https://code.wireshark.org/review/30815
Reviewed-by: João Valverde <j@v6e.pt>
Install headers to support plugins development on Windows.
Change-Id: I3161bd2f730edf62ab44fee6ce4fedbb9aee0d31
Reviewed-on: https://code.wireshark.org/review/30776
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Support reading and writing pcapng files with DSBs. A DSB may occur
multiple times but should appear before packets that need those
decryption secrets (so it cannot be moved to the end like NRB). The TLS
dissector will be updated in the future to make use of these secrets.
pcapng spec update: https://github.com/pcapng/pcapng/pull/54
As DSBs may be interleaved with packets, do not even try to read it in
pcapng_open (as is done for IDBs). Instead process them during the
sequential read, appending them to the 'wtap::dsbs' array.
Writing is more complicated, secrets may initially not be available when
'wtap_dumper' is created. As they may become available in 'wtap::dsbs'
as more packets are read, allow 'wtap_dumper::dsbs_growing' to reference
this array. This saves every user from checking/dumping DSBs.
If the wtap user needs to insert extra DSBs (while preserving existing
DSBs), they can set the 'wtap_dumper::dsbs_initial' field.
The test file was creating using a patched editcap (future patch) and
combined using mergecap (which required a change to preserve the DSBs).
Change-Id: I74e4ee3171bd852a89ea0f6fbae9e0f65ed6eda9
Ping-Bug: 15252
Reviewed-on: https://code.wireshark.org/review/30692
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add the ability to specify maximum function counts for each group to
checkAPIs. Add maximum counts for the "termoutput" and "abort" groups
where needed. Show summaries in various checkAPI targets.
Switch uses of ws_g_warning back to plain g_warning.
Change-Id: I5cbddc8c671729e424eed8551f69116d16491976
Reviewed-on: https://code.wireshark.org/review/29721
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Add a file parser and dissector that can handle the output of
`journalctl -o export`. From here we can add a systemd journal extcap
and possibly support for the JSON and binary formats.
Change-Id: I01576959b2c347ce7ac9aa57cdb5c119c81d61e9
Reviewed-on: https://code.wireshark.org/review/29311
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
A CMake config-file package provides support for downstreams using
CMake and Wireshark libraries to easily configure the libwireshark
dependency with:
find_package(Wireshark CONFIG [REQUIRED])
target_link_libraries(foo epan)
The FindWireshark.cmake file is no longer needed.
See cmake-package(7) for more details on CMake's package system.
Change-Id: Ie8af1d44417a99dd08d37959f7b2ffca88572ec2
Reviewed-on: https://code.wireshark.org/review/29208
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Do some renaming.
Change-Id: If8fa85370014f9618df38d97048dd1c52a4c389f
Reviewed-on: https://code.wireshark.org/review/28918
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Multi-configuration generators (such as Xcode or VS) append the current build configuration to most paths (eg. Debug/Release). Currently this results in inconsistent paths for the application bundle and the included command line tools. This commit sets the correct path information for multi-configuration generators for macOS application bundles. The standard Makefile behaviour is untouched.
One Windows specific configuration was changed, as it was conflicting with these changes. This needs to be checked before merging.
Additionally the wrapper scripts are omitted for Xcode, as the path to the binaries depends on the configuration chosen in Xcode. Therefore it is not viable to create these scripts in the cmake run.
Bug: 11816
Change-Id: Ib43d82eb04600a0e2f2b020afb44b579ffc7a7c9
Reviewed-on: https://code.wireshark.org/review/28291
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
gd2e0724afc moved our library versions into their own variables named
FULL_SO_VERSION. They're no longer used and interfere with
tools/release-update-debian-soversions.sh so remove them.
Fix some shellcheck warnings in release-update-debian-soversions.sh
while we're here.
Bug: 14778
Change-Id: I0eb0bb4ab4c482bdb8a94f8c18aa04c6c83c781b
Reviewed-on: https://code.wireshark.org/review/28068
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This reverts commit dfd6eb5d68.
This change cannot be submitted without change I5c0c7668bda969086d9d6e5069aad87e929f6340.
Change-Id: Ieb22f4e9afa1742db861a291202a2790a4784e1b
Reviewed-on: https://code.wireshark.org/review/27387
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Wiretap support for reading the Unigraf DPA-400 DisplayPort
AUX channel monitor logfiles.
Bug: 14651
Change-Id: I8d3c50575c9806dd04b40053db45564404bad103
Reviewed-on: https://code.wireshark.org/review/27312
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Now that we're suppressing warnings that come from Flex generating
insufficiently fussy code, just treat many of the Lex-generated files as
clean; we don't seem to be getting warnings from Lemon-generated ones.
Change-Id: Ib53ced6d8cb80645234929afca343d047d30f7f7
Reviewed-on: https://code.wireshark.org/review/25813
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This sets the scope of the static build option to Wireshark support
libraries only.
Before the patch:
Static plugins don't work with CMake and autotools.
autotools static build is broken, and most likely will always be, as
building Wireshark all-static is difficult and time-consuming.
After the patch:
For CMake Wireshark will be built with static or shared libraries and
dynamic plugins. Everything just works. CMake apparently doesn't want
you building static and shared libraries at the same time.
For autotools Wireshark will be built with shared libraries by default.
--disable-shared and --enable-static options work as usual. Dlopened
plugins are not built if --disable-shared is given to configure (to
disable shared libraries). This is a limitations imposed by libtool.
Tested on Linux. This removes broken support for building plugins
statically.
Change-Id: Ib8e8176976f136eea93a2ce8f9857b6cf9bec64c
Reviewed-on: https://code.wireshark.org/review/24241
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot
Reviewed-by: João Valverde <j@v6e.pt>
Autotools has the very useful feature by design of allowing the user
to override the default build flags (you break it you keep it).
Apparently CMake applies COMPILE_OPTIONS target property after
CMAKE_{C,CXX}_FLAGS so that doesn't work here. Prepend our flags to those
variables instead to make it work then.
Specific target flag overrides can still be added with COMPILER_OPTIONS
(e.g: generated files with -Wno-warning) but this is less effective and
then we're back at the point where this overrides user flags. It's less
of a concern though.
Change-Id: I44761a79be4289238e02d4e781fef0099628817b
Reviewed-on: https://code.wireshark.org/review/23675
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
It's not installed so like most other files it doesn't need or benefit
from the prefix.
Change-Id: I01517e06f12b3101fee21b68cba3bc6842bbef5c
Reviewed-on: https://code.wireshark.org/review/23751
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Instead of checking for the boolean "FALSE", just set an empty string.
This avoids the need to check for WERROR_COMMON_FLAGS before using it.
The transformation is the same for all files, remove
"if (WERROR_COMMON_FLAGS)" and "endif()", reindent and add quotes (since
we have a string here and not a list).
Modelines have been added where missing.
Change-Id: I0ab05ae507c51fa77336d49a99a226399cc81b92
Reviewed-on: https://code.wireshark.org/review/17997
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
Tested-by: Dario Lombardo <lomato@gmail.com>
Setting our compiler warning flags in CMAKE_C_FLAGS does not allow
using different flags per target.
Allow for that possibility by setting the internal WS_WARNINGS_{C,CXX}_FLAGS
and using the COMPILE_OPTIONS property to set them.
This change is just setting mechanism and there should be no difference
in generated warnings.
The check_X_compiler_flag cmake test is changed to test each flag individually.
We need a list, not a space separated string, and the aggregate test is not
significant.
Change-Id: I59fc5cd7e130c7a5e001c598e3df3e13f83a6a25
Reviewed-on: https://code.wireshark.org/review/17150
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
This aligns the name with what is done for other Wireshark shared libraries.
Moreover it allows to compile a wiretap plugin once per major release, without
the need to recompile it each time ${PROJECT_VERSION} changes (each nightly
build / official release).
Change-Id: I53c82277223a4f323079cf695168ac85c2fba523
Reviewed-on: https://code.wireshark.org/review/16058
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This generates a top level target, checkAPI, that is
excluded from the ALL build target, so must be run separately.
On Windows using a Visual Studio generator, call
msbuild /p:Configuration=RelWithDebInfo checkAPI.vcxproj
Change-Id: I44a57c564dcfc75499463b942436f4b920a82478
Reviewed-on: https://code.wireshark.org/review/14873
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Graham Bloice <graham.bloice@trihedral.com>
Remove the need for version.h.in and bring CMake up to par with autotools.
Change-Id: I701b56c475f5fdec1f9a028536fff6992ce8eaca
Reviewed-on: https://code.wireshark.org/review/15031
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
This allows keeping the code-sharing with the static linking.
This "fixes" a hypothetical ABI mismatch with wsutil and avoids pulling more
external dependencies to wsutil than strictly necessary.
A nice side-effect is that libwsutil no longer depends on version.h.
Follow up to f95976eefc.
Change-Id: I8f0d6a557ab3f7ce6f0e2c269124c89f29d6ad23
Reviewed-on: https://code.wireshark.org/review/15002
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
the mplog format is used by some commercial logging tools that capture
ISO 14443 traffic between a card reader and a contactless smartcard
Change-Id: If359b8f0f671eb2a7c6315e2b8960a5bd581a9e9
Reviewed-on: https://code.wireshark.org/review/14950
Reviewed-by: Martin Kaiser <wireshark@kaiser.cx>
This was inspired by https://code.wireshark.org/review/9729/, but takes it in a different direction where all options are put into an array, regardless of whether they are "standard" or "custom". It should be easier to add "custom" options in this design. Some, but not all blocks have been converted.
Descriptions of some of the block options have been moved from wtap.h to pcapng.h as it seems to be the one that implements the description of the blocks.
Also what could be added/refactored is registering block behavior.
Change-Id: I3dffa38f0bb088f98749a4f97a3b7655baa4aa6a
Reviewed-on: https://code.wireshark.org/review/13667
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This reverts commit b56f53884b.
Sadly, we *do* get warnings at this point with older versions of Flex,
such as the one on the 32-bit OS X buildbot.
Change-Id: I9aec1a16e9f2e1bbcfaac3dffdabdd89af5815e3
Reviewed-on: https://code.wireshark.org/review/12443
Reviewed-by: Guy Harris <guy@alum.mit.edu>
We shouldn't be getting warnings at this point.
Change-Id: I363a48546cb8d916425f42962ae1697d52ed9a29
Reviewed-on: https://code.wireshark.org/review/12436
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add "/WX" to the Visual C++ compiler flags if DISABLE_WERROR is off,
similar to config.nmake.
We haven't compiled C++ code with -Wshorten-64-to-32 for quite
some time so there's no need to add -Wno-shorten-64-to-32 in
ui/qt/CMakeLists.txt.
Additionally, squelch
----
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3050) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3065) : see reference to function template instantiation 'void std::_Median<_RanIt,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3127) : see reference to function template instantiation 'std::pair<_RanIt,_RanIt> std::_Unguarded_partition<_RanIt,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3157) : see reference to function template instantiation 'void std::_Sort<_Iter,int,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Diff,_Pr)' being compiled
with
[
_Iter=QList<QString>::iterator
, _RanIt=QList<QString>::iterator
, _Diff=int
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
.\rpc_service_response_time_dialog.cpp(130) : see reference to function template instantiation 'void std::sort<QList<QString>::iterator,bool(__cdecl *)(const QString &,const QString &)>(_RanIt,_RanIt,_Pr)' being compiled
with
[
_RanIt=QList<QString>::iterator
, _Pr=bool (__cdecl *)(const QString &,const QString &)
]
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3051) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3052) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\INCLUDE\algorithm(3053) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data (.\rpc_service_response_time_dialog.cpp)
----
in both rpc_service_response_time_dialog.cpp and wireshark_application.cpp
so that we'll compile successfully.
Change-Id: I457bcede99dcb1f3c1001f1f559c4901bb000357
Reviewed-on: https://code.wireshark.org/review/10533
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
The CMake dumpbabi targets collectively copy over 800 files. Do
that when when we build the actual targets instead of at configure
time. Hopefully this will speed up initial CMake runs.
Change-Id: I6e4d691e24c73ea05d638a0f897f570541c84e38
Reviewed-on: https://code.wireshark.org/review/10052
Reviewed-by: Gerald Combs <gerald@wireshark.org>