When VoIP Calls/Flow Sequence generates list of nodes to show (nodes above flow), it do not clear the list from last call. As consequence of it, when second call is between hosts than first call, you see nodes which are not involved in call.
Change-Id: I80f9acb09e6aa71b3a32bb6eacaeb5b4bb13b332
Reviewed-on: https://code.wireshark.org/review/19267
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
- spaghetti code for save was split into separate functions
- code saves G.711 only, all other codecs are saved as silence with correct duration
- code is ready to include other codecs
- code supports 8000 Hz sampling rate only, other rates are rejected with warning
- bidirectional stream (forward and reverse) creates stereo .au file
- output is based on timestamps in RTP streams
- save operation is slower than before because it is set of seek() - one per each codec sample
- code allows align of save audio:
- as it is - each stream is saved from its beginning, no aling
- to start of each other - later stream is prepended with silence
- align saved audio to beginning of capture file - each stream is prepended with silence
- save to raw works correctly now - only payload is saved
- old code was inserting G.711 silence time to time to raw data
Bug: 13242
Change-Id: I74d02a1cc1c75acf9ffe930d078c00a0555cbfb6
Reviewed-on: https://code.wireshark.org/review/19245
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Check the length of the line first.
Bug: 13246
Change-Id: I906bb652594898061afb4b2cd4edb916af354161
Reviewed-on: https://code.wireshark.org/review/19273
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Added back legacy version (<= 0.9.7) support after restructuring
for dissector completeness.
Change-Id: I5355bf8faa1b9fd8ee9056254048fe5c314b6efb
Reviewed-on: https://code.wireshark.org/review/19271
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This clears up the diff between the local copy of the CMS module and
upstream, making it easier to determine what modifications were made.
Change-Id: I466cb97e6505ea8075d01663e1ede95b85468898
Reviewed-on: https://code.wireshark.org/review/19269
Reviewed-by: Anders Broman <a.broman58@gmail.com>
- Added header fields in a new subtree.
- Restructured to use fewer functions and to use offset
counting instead of offset defines.
- Removed support for legacy version 0.9.7.
- Removed unused code.
Change-Id: I9eb6c8b3b450ddb95fb0f4bdd9f9717dafa687b0
Reviewed-on: https://code.wireshark.org/review/19260
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The dissector for the Nordic BLE Sniffer was added as internal in
g7844a118, so ensure we don’t load this third party dll on WIN32.
Change-Id: I74c200d42793f3c1e764bc9f6c3a9a795d38a5a7
Reviewed-on: https://code.wireshark.org/review/19259
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The help statement is in the first sentence, while interfaces are
in others. We need to keep state of it.
Ping-Bug: 13218
Change-Id: Iad1d403d5e8bc34e2489daaa3b14d469d5ee5b5b
Reviewed-on: https://code.wireshark.org/review/19148
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Roland Knall <rknall@gmail.com>
Format of file selected by user is derived from save dialog format selection, not from filename as before.
Bug: 13240
Change-Id: Id6e159d97e4f26c25b3d2d98d43041d8617cc737
Reviewed-on: https://code.wireshark.org/review/19240
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Dialog shows time (relative to capture start) and packet number when forward and reverse stream starts. It shows difference in such values on bottom of dialog too.
Bug: 13239
Change-Id: If807b8a56723df17ed131b1aac053cf8f985bb7b
Reviewed-on: https://code.wireshark.org/review/19239
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It's a manual attempt at what proto_tree_add_bitmask can do anyway.
Change-Id: If551e8afa346a33b8e15dc441aae75ba0752ab46
Reviewed-on: https://code.wireshark.org/review/19257
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Also use proto_tree_add_item_ret_length for string handling.
Change-Id: Id1eae2e51460a3b7f4c3385b9b1fd7f12398a227
Reviewed-on: https://code.wireshark.org/review/19255
Reviewed-by: Michael Mann <mmann78@netscape.net>
1. Remove functionality that was replaced by a proto_tree_add_bitmask
2. Remove use of nbdgm_header structure which is just a useless placeholder
3. Remove some if (tree) over single fields.
Change-Id: I0879043685686eb5b861cf77ec38bbf25ed6044e
Reviewed-on: https://code.wireshark.org/review/19254
Reviewed-by: Michael Mann <mmann78@netscape.net>
IMG_JFIF was trying to be a macro for all display and expert info filters.
This messed with the pre-commit scripts ability to ensure protocol
filter name was being used as the prefix for display and expert info
filters. So replaced IMG_JFIF with the proper prefix - "image-jfif"
Change-Id: I1fe3dc8797529c9d17f75c511bc279824e7e69b0
Reviewed-on: https://code.wireshark.org/review/19253
Reviewed-by: Michael Mann <mmann78@netscape.net>
The file list contains semicolon-separated list of files to check.
When merging the lists we need to separate them properly.
Error:
No such file: "packet-ncp2222.cpacket-coseventcomm.c" at wireshark/tools/checkAPIs.pl line 2050.
Change-Id: I19702ab85408caf69ed922732fce74c3058be640
Reviewed-on: https://code.wireshark.org/review/19237
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Several calls to proto_tree_add_uint_format_value could be better served
using BASE_UNIT_STRING with a "unit string" in hf_ field. There also
a few cases where proto_tree_add_uint_format_value could just be
proto_tree_add_uint.
Added a few more "common" unit string values to unit_strings.[ch]
Change-Id: Iaedff82c515269c9c31ab9100dff19f5563c932d
Reviewed-on: https://code.wireshark.org/review/19242
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Several calls to proto_tree_add_[float|double]_xxx could be better served
using BASE_UNIT_STRING with a "unit string" in hf_ field.
Added a few more "common" unit string values to unit_strings.[ch]
Change-Id: Id0da7b579403898d20c2667d6c4abcd59d5a48d4
Reviewed-on: https://code.wireshark.org/review/19241
Reviewed-by: Michael Mann <mmann78@netscape.net>
Stash the current row when we freeze the packet list. Make it possible
to restore it when thawing. Do so when the layout changes and when we
move a column.
Change-Id: I44cfb8bafcd4d49a46e1c89bf47aecf5ac139773
Reviewed-on: https://code.wireshark.org/review/19222
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Same SSRC is shown because of typo in variable name for reverse stream.
Bug: 13236
Change-Id: Idcba4d83c7b4358cd8ebf1ee5c5b5bde2fc2e48b
Reviewed-on: https://code.wireshark.org/review/19238
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This was inspired by the https://www.wireshark.org/lists/wireshark-dev/201505/msg00029.html thread.
Used TCP and NTP dissectors as the guinea pig with sample use.
Documentation updates includes some unrelated cleanup just because it was noticed.
Change-Id: I59b26e1ca3b95e3473e4757f1759d7ad82976965
Reviewed-on: https://code.wireshark.org/review/19211
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Set all addresses before we do reassembly because sub-dissectors may set
their own addresses, and we don't want to override them again.
This fixes "Follow TCP Stream" and shows the correct IP addresses in the
Source and Destination columns when transporting IP packets.
Allocate the addresses in pinfo pool to avoid possible stack buffer overflow.
Bug: 13230
Change-Id: I3b81ccb02b38331add4773d9bb3d5e0f6dcf025e
Reviewed-on: https://code.wireshark.org/review/19201
Petri-Dish: Stig Bjørlykke <stig@bjorlykke.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Stig Bjørlykke <stig@bjorlykke.org>
The protocol is actually nearly identical to ordinary Diffie-Hellman,
but the names are different, and the ephemeral keys are bytestrings
rather than integers.
Change-Id: I261b6426137dae12fe53686e74517080abd80bb3
Reviewed-on: https://code.wireshark.org/review/19210
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Parse the communication bits of a BGP Cease NOTIFICATION:
Border Gateway Protocol - NOTIFICATION Message
Marker: ffffffffffffffffffffffffffffffff
Length: 146
Type: NOTIFICATION Message (3)
Major error Code: Cease (6)
Minor error Code (Cease): Administratively Shutdown (2)
BGP Shutdown Communication Length: 124
Shutdown Communication: NTT will perform maintenance on this router. This is tracked in TICKET-1-24824294. Contact noc@ntt.net for more information.
Draft at https://tools.ietf.org/html/draft-ietf-idr-shutdown-01, sample
file taken from from http://instituut.net/~job/shutdown.pcap
Change-Id: I2ab633883cc69e560ff79cb6239e02fcffd71e10
Reviewed-on: https://code.wireshark.org/review/19144
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add "LE Set Extended Advertising Parameters" and
"LE Set Extended Advertising Parameters" commands parsing.
Change-Id: Ibcc9f145694e54710da3a11ade237f7132674366
Reviewed-on: https://code.wireshark.org/review/19234
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add plugin to autofoo and CMake build systems and fix errors found
Add plugin to Windows installer (optional component activated by default)
Change-Id: Id1b777bdee04e53076b3291f6fb68d5abad6985d
Reviewed-on: https://code.wireshark.org/review/19228
Petri-Dish: Pascal Quantin <pascal.quantin@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Commit 66549a9cac added 3 new entries to
wka.tmpl, but used spaces instead of the default tab separator. This
inconsistency causes external tools that expect tabs in the manuf file
to behave unexpectedly.
The manuf file was re-generated after the fix to wka.tmpl.
Change-Id: I79bceac649e0fc29b3502fc2e074dcd513f29ff5
Reviewed-on: https://code.wireshark.org/review/19217
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Dissectors above infiniband (such as RPC dissector)
performs exact lookup on saddr, daddr, sport, dport. They are unaware
that underlying transport is infiniband which doesn't have src_qp in
packets. Due to which srcport remains uninitialized and exact lookup
fails.
In order to get them work seemlessly, this fix updates the sport
to src_qp (similar to destport to dest_qp). With this upper level
dissectors can perform direct lookup similar to TCP. Those which need to
access private data of unidirectional CM messages, can still continue to
perform unidirectional lookup as before.
It also fixes the issue where req_qp and resp_qp were swapped during
bidirectional conversation creation. This was caught during testing with
packet-rpc.c by Chuck Lever.
Tested protocols:
1. nfs-rdma over Infiniband with trace of Bug 13213
2. ICMP packets over Infiniband
3. NVMe fabrics over RDMA
Tested with trace of Bug 13201 for Nvme.
Bug: 13202
Bug: 13213
Change-Id: Ica1b6aae3ccaa6642dc3b3edfa9a5a4c335cc5da
Tested-by: paravpandit@yahoo.com
Reviewed-on: https://code.wireshark.org/review/19190
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Update our WinSparkle package to 0.5.3. This fixes a file deletion bug.
Note that WinSparkle now supports application shutdown callbacks, which
should let us fix bugs 9687 and 12989.
Bug: 13217
Change-Id: I4b5f325c6dc251ce167f7bd344bbf3ca5ad3fe14
Reviewed-on: https://code.wireshark.org/review/19230
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
QComboBox::setCurrentText() method is available in Qt5.x.
Older versions code won't compile with it.
Bug: 13235
Change-Id: Ia2e2713fefe0f2be01a0b77ff1ac39c9162fd0d1
Reviewed-on: https://code.wireshark.org/review/19219
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
It's GTK+-only, so it shouldn't be in ui/ui_util.h. Get rid of the
unused Qt packet list implementation of it.
Change-Id: Ia9f8fe2209939dff5244e6948c36f29509340f68
Reviewed-on: https://code.wireshark.org/review/19226
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Just directly call the packet_list_select_ routine from the GTK+ code.
Change-Id: I9146fb968c407d6186b146a86aa34678765f7352
Reviewed-on: https://code.wireshark.org/review/19225
Reviewed-by: Guy Harris <guy@alum.mit.edu>
the dynamic payload type defined. If so set the dynamic
payload_type_string to that dissectors name.
This is for RTP analysis to work if there is no setup information in the
file.
Change-Id: I7ae7b957cfa9eb6013f7d32d50563e2034210af6
Reviewed-on: https://code.wireshark.org/review/19220
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Those routines can handle any single-byte character set whose characters
map to characters in the Basic Multilingual Plane; it could be used for
extended ASCII, but we have another routine for that, mapping only
characters with code points > 0x7f, so we just say "nonascii" rather
than "ebcdic".
Change-Id: I3d55b5d58e3e7ab08f3dfbfdb57a0301a30e71d4
Reviewed-on: https://code.wireshark.org/review/19214
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have a routine that takes a 256-element translation table and uses it to
map various flavors of EBCDIC to Unicode. Have separate translation
tables for "common" EBCDIC (everything that's the same in all EBCDIC
code pages that include the original EBCDIC characters) and EBCDIC code
page 037. Add ENC_EBCDIC_CP037 for code page 037.
Change-Id: Ia882b3c0abef9e30eb54cd47396e6fa0d6342044
Reviewed-on: https://code.wireshark.org/review/19212
Reviewed-by: Guy Harris <guy@alum.mit.edu>
* kex_first_packet_follows -> first_kex_packet_follows
That's the name the spec (RFC 4253) uses.
* DH H signature -> H signature, DH host key -> host key
Neither the host key nor the H signature have much to do
with Diffie-Hellman. They're used in the same way in
every key exchange method that I know of, so their names
should be more generic.
* mpint_[ef] -> dh_[ef], mpint_[pg] -> dh_gex_[pg]
This is to make all key exchange method-specific fields follow
a consistent pattern with all names/abbrevs being prepended
by the method name.
Change-Id: Ic887fb92d8cbb6042e9b8e553cb5804db0ba4db8
Reviewed-on: https://code.wireshark.org/review/19199
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Jiri Novak