Expand comments while we're at it.
Change-Id: I6dcc791eab1c9e323a9572f3d54720d223bdd64b
Reviewed-on: https://code.wireshark.org/review/21252
Reviewed-by: Guy Harris <guy@alum.mit.edu>
These are similar to the routines added to ui/alert_box.c for dialog-box
libwiretap error reporting.
This centralizes the knowledge about what to say for various libwiretap
errors, removing some duplicate code, and giving more details in some
programs.
Change-Id: I737405c4edaa0e6c27840f78a8c587a8b3ee120b
Reviewed-on: https://code.wireshark.org/review/21234
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Replace the dash in a range with a '\0', so that the first value in the
range is properly terminated.
Change-Id: Ib2807c2534c1e99e643848ca0fc32f4b78025ce3
Reviewed-on: https://code.wireshark.org/review/21099
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Add a "report a warning message" routine to the "report_err" code in
libwsutil, and rename files and routines appropriately, as they don't
only handle errors any more.
Have a routine read_enabled_and_disabled_protos() that reads all the
files that enable or disable protocols or heuristic dissectors, enables
and disables them based on the contents of those files, and reports
errors itself (as warnings) using the new "report a warning message"
routine. Fix that error reporting to report separately on the disabled
protocols, enabled protocols, and heuristic dissectors files.
Have a routine to set up the enabled and disabled protocols and
heuristic dissectors from the command-line arguments, so it's done the
same way in all programs.
If we try to enable or disable an unknown heuristic dissector via a
command-line argument, report an error.
Update a bunch of comments.
Update the name of disabled_protos_cleanup(), as it cleans up
information for disabled *and* enabled protocols and for heuristic
dissectors.
Support the command-line flags to enable and disable protocols and
heuristic dissectors in tfshark.
Change-Id: I9b8bd29947cccdf6dc34a0540b5509ef941391df
Reviewed-on: https://code.wireshark.org/review/20966
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Our user-facing messages should have a helpful (or at the very least
neutral) tone. In English, exclamation points are neither. Replace a
bunch of them with periods.
Change-Id: I29c3b2f84c25e06aae5b559860224559053a0378
Reviewed-on: https://code.wireshark.org/review/20189
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The cleanup routine has been added to exit section of the applications.
Those which required a exit restyle have been patched as well.
Change-Id: I3a8787f0718ac7fef00dc58176869c7510fda7b1
Reviewed-on: https://code.wireshark.org/review/19949
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Dario Lombardo <lomato@gmail.com>
With option -I one can ignore the first number of bytes from the frame
while doing duplicate frame removal. This doesn't handle shorter frames
correctly. Add safeguards for this, and update the help text.
Bug: 13378
Change-Id: Ia6b65d0797f4069f0b89fa134114d88d80988211
Reviewed-on: https://code.wireshark.org/review/20004
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Make the init_progfile_dir() call unconditionally, even if plugins
aren't supported, as that doesn't necessarily mean nobody uses the
directory containing the executable.
Report the error the same way in all programs, and free the error string
after we're finished with it.
Make the error - and the comment before the code - reflect what
init_progfile_dir() is actually doing (the goal is to get the full
pathname of the directory *containing* the executable; that's generally
done by getting the pathname of the executable and stripping off the
name of the executable, but that's won't necessarily always be the
case). Also note for TShark that we won't be able to capture traffic,
just as we do for Wireshark (if we don't have the pathname of the
program file, we don't have a pathname to use to find dumpcap).
Have the plugin scanner just fail silently if we weren't able to get the
plugin directory path, so we don't have to worry about calling it if
init_progfile_dir() fails.
Clean up white space while we're at it.
Change-Id: I8e580c719aab6fbf74a764bf6629962394fff7c8
Reviewed-on: https://code.wireshark.org/review/19076
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Have programs that use libwiretap call that routine rather than
separately calling some or all of init_open_routines(),
wtap_register_plugin_types(), and wtap_opttypes_initialize().
Also don't have routines internal to libwiretap call those. Yes, this
means doing some initialization work when it isn't necessary, but
scattering on-demand calls throughout the code is a great way to forget
to make those calls.
Change-Id: I5828e1c5591c9d94fbb3eb0a0e54591e8fc61710
Reviewed-on: https://code.wireshark.org/review/19069
Reviewed-by: Guy Harris <guy@alum.mit.edu>
secs_per_block is a unsigned integer. Therefore we can't
compare a signed integer with it.
Change-Id: Ic965a88e0e704e296c4af9193ca4a3504173ae36
Reviewed-on: https://code.wireshark.org/review/17901
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
It doesn't have to be non-zero.
Change-Id: If578906855abd9eb9fa07e97ee5508c139b6f61b
Reviewed-on: https://code.wireshark.org/review/17646
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The version string stuff mirrors an earlier tshark change. Move some
cleanup calls (in case no packets are selected) and add wtap_close.
Change-Id: I6f282e89279a732c226824e10857be04b40841e8
Reviewed-on: https://code.wireshark.org/review/17621
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
By analogy to get_natural_int() and get_positive_int(), add routines to
get a guint32 and to get a non-zero guint32, doing all the necessary
error checks, and use it.
Change-Id: I65a9ac8a3d136886df3588806ae7af5bdc7b8cb6
Reviewed-on: https://code.wireshark.org/review/17586
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That's a less gross hack to suppress load failures due to not having
libwiretap than providing a no-op failure-message routine, as it at
least allows other code using a failure-message routine, such as
cmdarg_err() and routines that call it, to be used.
We really should put libwiretap and libwireshark plugins into separate
subdirectories of the plugin directories, and avoid even looking at
libwireshark plugins in programs that don't use libwireshark.
Change-Id: I0a6ec01ecb4e718ed36233cfaf638a317f839a73
Reviewed-on: https://code.wireshark.org/review/17506
Reviewed-by: Guy Harris <guy@alum.mit.edu>
A string option, if present, always has a value; it might be a null
*string*, but you won't get a null pointer (if the option isn't present,
it simply isn't present).
Fix some comments while we're at it.
Change-Id: I9c1420f56998a7d04de5c5cc2e92631b181f303a
Reviewed-on: https://code.wireshark.org/review/16564
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I5669e2442582f899643fae4a9f86ab6d505dde07
Reviewed-on: https://code.wireshark.org/review/16505
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
A block can have zero or more instances of a given option. We
distinguish between "one instance only" options, where a block can have
zero or one instance, and "multiple instances allowed" options, where a
block can have zero or more instances.
For "one instance only" options:
"add" routines add an instance if there isn't one already
and fail if there is;
"set" routines add an instance if there isn't one already
and change the value of the existing instance if there is one;
"set nth" routines fail;
"get" routines return the value of the instance if there is one
and fail if there isn't;
"get nth" routines fail.
For "multiple instances allowed" options:
"add" routines add an instance;
"set" routines fail;
"set nth" routines set the value of the nth instance if there is
one and fail otherwise;
"get" routines fail;
"get nth" routines get the value if the nth instance if there is
one and fail otherwise.
Rename "optionblock" to just "block"; it describes the contents of a
block, including both mandatory items and options.
Add some support for NRB options, including IPv4 and IPv6 option types.
Change-Id: Iad184f668626c3d1498b2ed00c7f1672e4abf52e
Reviewed-on: https://code.wireshark.org/review/16444
Reviewed-by: Guy Harris <guy@alum.mit.edu>
editcap -r only sets max_packet_number to the earliest, instead of latest,
packet or end of range selection. This changes it to the proper test.
Bug: 12547
Change-Id: I81772962b00fc6566ccead4fb44c6626a47fff31
Reviewed-on: https://code.wireshark.org/review/16045
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This doesn't try to use any data from multiple Name Resolution blocks, it
just converts single Name Resolution block usage into a GArray, so the
potential is there to then use/support multiple Name Resolution blocks
within a file format (like pcapng)
Change-Id: Ib0b584af0bd263f183bd6d31ba18275ab0577d0c
Reviewed-on: https://code.wireshark.org/review/15684
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This doesn't try to use any data from multiple Section Header blocks, it
just converts single Section Header block usage into a GArray, so the
potential is there to then use/support multiple Section Header blocks
within a file format (like pcapng)
Change-Id: I6ad1f7b8daf4b1ad7ba0eb1ecf2e170421505486
Reviewed-on: https://code.wireshark.org/review/15636
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Also add a length parameter to wtap_optionblock_set_option_string
Change-Id: I8c7bbc48aa96b5c2a91ab9a17980928d6894f1ee
Reviewed-on: https://code.wireshark.org/review/15505
Reviewed-by: Anthony Coddington <anthony.coddington@endace.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
This allows keeping the code-sharing with the static linking.
This "fixes" a hypothetical ABI mismatch with wsutil and avoids pulling more
external dependencies to wsutil than strictly necessary.
A nice side-effect is that libwsutil no longer depends on version.h.
Follow up to f95976eefc.
Change-Id: I8f0d6a557ab3f7ce6f0e2c269124c89f29d6ad23
Reviewed-on: https://code.wireshark.org/review/15002
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: João Valverde <j@v6e.pt>
Replace some function calls with their non-deprecated equivalents so
that we can remove _CRT_NONSTDC_NO_DEPRECATE from CMakeLists.txt and
config.nmake.
Leave _CRT_SECURE_NO_DEPRECATE in place. Removing it failed with 145
warnings and 72 errors.
Note that we could probably improve startup performance by using wmem
in diam_dict.*.
Change-Id: I6e130003de838aebedbdd1aa78c50de8a339ddcb
Reviewed-on: https://code.wireshark.org/review/14883
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Change-Id: I0950f61e90af5bb21c0017204de0c0b509616e5c
Reviewed-on: https://code.wireshark.org/review/14747
Petri-Dish: João Valverde <j@v6e.pt>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The preceding code takes every effort to make sure that the
frac and end pointers are relevant pointers. Don't go back and
check for NULL yet again.
Change-Id: If805aee5a77a8c23eac7b074bd11d3743c5e1a3b
Reviewed-on: https://code.wireshark.org/review/14398
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Michael Mann <mmann78@netscape.net>
The ethertype is 16 bits and big-endian, so fetch it with pntoh16() to
convert it to host byte order (and to handle unaligned values).
Fixes Coverity CID 1355352.
Change-Id: I14980e2813c3ea19c6df01681f8ed7aaad5c3f59
Reviewed-on: https://code.wireshark.org/review/14359
Reviewed-by: Guy Harris <guy@alum.mit.edu>
This was inspired by https://code.wireshark.org/review/9729/, but takes it in a different direction where all options are put into an array, regardless of whether they are "standard" or "custom". It should be easier to add "custom" options in this design. Some, but not all blocks have been converted.
Descriptions of some of the block options have been moved from wtap.h to pcapng.h as it seems to be the one that implements the description of the blocks.
Also what could be added/refactored is registering block behavior.
Change-Id: I3dffa38f0bb088f98749a4f97a3b7655baa4aa6a
Reviewed-on: https://code.wireshark.org/review/13667
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Add additional --novlan flag for removing vlan tag info before checking for duplicates.
When capturing with -i any you could see packets more than once and some drivers include vlan info.
With the --novlan the vlan info is removed from the packet so that checksum duplication detection can be used,
if the rest of the packets are the same.
Change-Id: I5dca6e20259a0a396875919e9e60cc42291579d3
Reviewed-on: https://code.wireshark.org/review/13414
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
If the seconds value in a time stamp is 0, that says nothing whatsoever
about whether it's supported or not - it's the presence flag, which
we've already tested and found to be set, that indicates whether the
time stamp is supported.
Bug: 12116
Change-Id: I91354783af7b6356d9806c7559d35da44ea4567f
Reviewed-on: https://code.wireshark.org/review/13913
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Change-Id: I3ec3c4723d29d84b25419982712707126351a01c
Reviewed-on: https://code.wireshark.org/review/13301
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Also allow for range to include "the rest" (ex 10- would include all the packets starting at number 10)
Bug: 9686
Change-Id: Ib02e52b22acf49b0e52df0a75fa4fa0d5f37aa31
Reviewed-on: https://code.wireshark.org/review/13291
Reviewed-by: Michael Mann <mmann78@netscape.net>
Bug: 12007
Change-Id: Icd31988ebbfe1e0bf4d29f32462c58c6c2c55547
Reviewed-on: https://code.wireshark.org/review/13277
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Guy Harris