And put hyphens in "out-of-tree" and "in-tree".
Change-Id: I55c54a1334f490f948310139741fecf27203a359
Reviewed-on: https://code.wireshark.org/review/27550
Reviewed-by: Guy Harris <guy@alum.mit.edu>
macOS is a UNIX(R) and FreeBSD isn't a UNIX(R), but we mentioned macOS
along with UNIX but didn't mention FreeBSD along with UNIX.
Instead, just speak of "UN*Xes" and give Linux, macOS, and *BSD as
examples. Feel free to add Solaris, AIX, or HP-UX if you want, assuming
you can build Wireshark on them.
Change-Id: I85be3861fa0bc603b93d077a2d9d587d43cb6e7e
Reviewed-on: https://code.wireshark.org/review/27549
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Several graphics files are not listed in the symbol that defines
the dependancy for document building. Adding these files to the
WSUG_GRPAHICS symbol makes the list consistent.
Bug: 14676
Change-Id: I3016a1994473f90df460d726773c8470dbedd3bc
Signed-off-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-on: https://code.wireshark.org/review/27471
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This speeds up the copy/paste step-by-step sequence.
Change-Id: Ib2e3ee54c8c86b7357260ecaab5d129ef296a9e9
Reviewed-on: https://code.wireshark.org/review/27309
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Note in the quick setup and tools documentation that we no longer
require or recommend Cygwin.
Change-Id: Ie0eb92c5817ae1d786136035adf8fa3988c8b98d
Reviewed-on: https://code.wireshark.org/review/27244
Reviewed-by: Guy Harris <guy@alum.mit.edu>
ENABLE_CHM_GUIDES is no longer in CMakeOptions.txt
Change-Id: I217ac89f12c95e66591465e3230c19968dcc0bde
Reviewed-on: https://code.wireshark.org/review/27209
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Dissector for GSM-R protocol. Specification ETSI TS 102 610.
Trace example in https://wiki.wireshark.org/SampleCaptures [[attachment:gsm-r.uus1.pcap]]
Change-Id: I7496bfa141d75b3460f7c3bdbb791e24d4810231
Reviewed-on: https://code.wireshark.org/review/26929
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add the fileformats and I/O suites. Move some more common code to
subprocesstest.py and add a diffOutput method.
Change-Id: I2ec34e46539022bdce78520645fdca6dfc1a8c1a
Reviewed-on: https://code.wireshark.org/review/27183
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Create Python versions of our various test shell scripts. Add CMake
tests for each suite. Tests can now be run directly via test.py, via the
"test" target, or via ctest, e.g.
ctest --verbose --jobs 3
Add a testing chapter to the Developer's Guide.
Add a way to disable ctest in dpkg-buildpackage.
Suites completed:
- capture
- clopts
- decryption
- dissection
Remaining suites:
- fileformats
- io
- mergecap
- nameres
- text2pcap
- unittests
- wslua
Change-Id: I8936e05edefc76a86b6a7a5da302e7461bbdda0f
Reviewed-on: https://code.wireshark.org/review/27134
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Gerald Combs <gerald@wireshark.org>
This adds support for the TPM 2.0 "protocol" as defined
by the Trusted Computing Group (TCG) specification.
The specification can be found here:
https://trustedcomputinggroup.org/tpm-library-specification/
The specification defines the format of the all TPM requests
and responses that this dissector supports.
A sample capture file that can be used for testing this
can be found in the https://wiki.wireshark.org/SampleCaptures
It is called policy-authorizeNV.pcap.
Change-Id: I557cb779f3adc5313e6d3498bbfeb56fdd308fbf
Reviewed-on: https://code.wireshark.org/review/26866
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add missing section on display filter functions to WSUG and make it
consistent with the wireshark-filter(4) manual. "count" was added in
Wireshark 1.12 (bug 9480). "len" was added in Wireshark 1.6.x.
"size" (added in 1.8.x) is not documented since it works like "len",
except that it is not limited to strings and byte arrays. I think that
"len" should be extended to other types while removing "size".
Change-Id: I2c8e2b4a11f007de7852a797bed971af86840b47
Reviewed-on: https://code.wireshark.org/review/27146
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
The Osmocom GSUP protocol is a light-weight alternative to the
classic GSM MAP protocol. It operates between (MSC|SGSN) and HLR.
Change-Id: I954c7e332dce3a8855f7f4ace0b878f66da6f02e
Reviewed-on: https://code.wireshark.org/review/25477
Petri-Dish: Alexis La Goutte <alexis.lagoutte@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
For numeric values such as port numbers, "4430..4434" looks more
natural than "4430 .. 4434", so support that.
To make this possible, the display filter syntax needs to be restricted.
Assume that neither field names nor values can contain "..". The display
filter `data contains ..` will now be considered a syntax error and must
be written as `data contains ".."` instead. More generally, all values
that contain ".." must be quoted.
Other than the ".." restriction, the scanner deliberately accepts more
characters that can potentially form invalid input. This is to prevent
accidentally splitting input in multiple tokens. For example, "9.2." in
"frame.time_delta in {9.2.}" is currently parsed as one token and then
rejected because it cannot be parsed as time. If the scanner was made
stricter, it could treat it as two tokens (floats), "9." and "2." which
has different meaning for the set membership operator.
An unhandled edge case is "1....2" which is parsed as "1 .. .. 2" but
could have been parsed as "1. .. .2" instead. A float with trailing dots
followed by ".." seems sufficiently weird, so rejection is fine.
Ping-Bug: 14180
Change-Id: Ibad8e851b49346c9d470f09d5d6a54defa21bcb9
Reviewed-on: https://code.wireshark.org/review/26960
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Allow "tcp.srcport in {1662 1663 1664}" to be abbreviated to
"tcp.srcport in {1662 .. 1664}". The range operator is supported for any
field value which supports the "<=" and "=>" operators and thus works
for integers, IP addresses, etc.
The naive mapping "tcp.srcport >= 1662 and tcp.srcport <= 1664" is not
used because it does not have the intended effect with fields that have
multiple occurrences (e.g. tcp.port). Each condition could be satisfied
by an other value. Therefore a new DVFM instruction (ANY_IN_RANGE) is
added to test the range condition against each individual field value.
Bug: 14180
Change-Id: I53c2d0f9bc9d4f0ffaabde9a83442122965c95f7
Reviewed-on: https://code.wireshark.org/review/26945
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It has been replaced by cmake.
Change-Id: I83a5eddb8645dbbf6bca9f026066d2e995d8e87a
Reviewed-on: https://code.wireshark.org/review/26969
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Switch to a single Doyxgen configuration which was generated using a
recent version of Doxygen and customized to suit our needs. Add
wsar_html and wsar_html_zip targets to CMake. Update some Doxygen markup
and documentation as needed.
Change-Id: Ic8a424b292c35a26f74ae0b53322265683e56e69
Reviewed-on: https://code.wireshark.org/review/26976
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Tested with some hand-generated PDUs.
Change-Id: Ic603d0ca4578d23121e438ac2458be34e63492d2
Reviewed-on: https://code.wireshark.org/review/26755
Petri-Dish: Martin Mathieson <martin.r.mathieson@googlemail.com>
Tested-by: Petri Dish Buildbot
Reviewed-by: Martin Mathieson <martin.r.mathieson@googlemail.com>
The Lua documentation has class names at its third level which is quite useful
to discover its documentation.
This reverts commit f5cd52c0fb.
Change-Id: I2a2e82041ac46a1a9974727bbb1d5cbf6855a878
Reviewed-on: https://code.wireshark.org/review/26814
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This patch adds support for sequencing HTTP Redirects. This enables
tracking of HTTP-based redirects, which may not have a Referer header.
As such, this patch also renames 'HTTP Referer statistics' to
'HTTP Request Sequences' to better reflect the more generic
functionality.
Note that this does not fully support RFC 3986. An external library like
uriparser.github.io may be a better option for efficient, full relative
HTTP URL resolution.
A Sample PCAP to test functionality is available here:
https://wiki.wireshark.org/SampleCaptures?action=AttachFile&do=get&target=http_redirects.pcapng
A sample PCAP to demonstrate usefulness is available here:
https://www.malware-traffic-analysis.net/2015/08/31/page2.html
(examine request to hxxp://lk2gaflsgh.jgy658snfyfnvh.com/service.php)
Change-Id: I9edd1a1de86228b0dcb1df9f6f30e24379684321
Reviewed-on: https://code.wireshark.org/review/26679
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Update some cross references which were renamed in 1cd92c4961. Fixup
some capitalization while we're here.
Change-Id: Iae3227839cd34a52662a4b973c0f87e7e5a765cc
Reviewed-on: https://code.wireshark.org/review/26655
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Copy the current wireshark.spec.in and update it for use with CMake.
Remove the Qt4, GTK+2, and GTK+3 options. Add Ninja and mmdbresolve
options.
The rpm-package target builds a tarball using git-export-release.sh and
therefore must be run from a git checkout. The RPM _prefix macro is set
to CMAKE_INSTALL_PREFIX, so you'll probably want to run
cmake -DCMAKE_INSTALL_PREFIX=/usr ...
Change-Id: Ib014494d8858a0059126404cd91528ded5d8a9f6
Reviewed-on: https://code.wireshark.org/review/26579
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Jaap Keuter <jaap.keuter@xs4all.nl>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Add duplicate ACK ticks to Statistics → TCP Stream Graphs → Time
Sequence (tcptrace), which I missed when porting from GTK+. Add zero
window crosses while we're here.
Switch TCPStreamDialog to a subclass of GeometryStateDialog.
Add a slot and URL for the Help button and a stub entry in the User's
Guide.
Bug: 12009
Change-Id: Idf2ddb9eb33d924d65998285b5cffc234156497c
Reviewed-on: https://code.wireshark.org/review/26592
Reviewed-by: Gerald Combs <gerald@wireshark.org>
Petri-Dish: Gerald Combs <gerald@wireshark.org>
Tested-by: Petri Dish Buildbot
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Ensure the dialog is populated when the dialog is opened after a capture
file has already been loaded.
Change-Id: I9ba1b4a1eb7a8b21ce7dac4a820eadf10daa9845
Reviewed-on: https://code.wireshark.org/review/26601
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Mention Npcap on the WinPcap installer page and add a link to it.
Update some other text and tell developers to use NSIS 3.0 while we're
here.
Change-Id: I64728f014f518439ba4a38eda7a283274d40fcdc
Reviewed-on: https://code.wireshark.org/review/26515
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Switch a build example to CMake + Ninja. Add syntax highlighting
annotations.
Change-Id: I5ee0af548f44ed5be6f6e8367f5167dc499df017
Reviewed-on: https://code.wireshark.org/review/26514
Reviewed-by: Anders Broman <a.broman58@gmail.com>
This change introduces the OSCORE dissector, following
draft-ietf-core-object-security-07. It performs decryption and
authenticity
check on requests.
Bug: 14417
Change-Id: I92e45d66d5df51f6d4dbea4ef44e707955b65bee
Reviewed-on: https://code.wireshark.org/review/25480
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Guy Harris
Harald Welte