Without that, you could add a comment to a record in a file format the
reading code for which doesn't allocate blocks, but the comment doesn't
get saved, as there's no block in which to save the comment option.
This simplifies some code paths, as we're either using the record's
modified block or we're using the block as read from the file, there's
no third possibility.
If we attempt to read a record, and we get an error, and a block was
allocated for the record, unreference it, so the individual file readers
don't have to worry about it.
Most of the time, the return value tells us nothing useful, as we've
already decided that we're perfectly willing to live with string
truncation. Hopefully this keeps Coverity from whining that those
routines could return an error code (NARRATOR: They don't) and thus that
we're ignoring the possibility of failure (as indicated, we've already
decided that we can live with string truncation, so truncation is *NOT*
a failure).
It only registers one file type/subtype, so rename it to
wtap_register_file_type_subtype().
That will also force plugins to be recompiled; that will produce compile
errors for some plugins that didn't change to match the new contents of
the file_type_subtype_info structure.
Also check to make sure that the registered file type/subtype supports
at least one type of block; a file type/subtype that doesn't return
*any* blocks and doesn't permit *any* block types to be written is not
very useful. That should also catch most if not all other plugins that
didn't change to match the new contents of the file_type_subtype_info
structure.
Don't make errors registering a file type/subtype fatal; just complain,
don't register the bogus file type/subtype, and drive on.
Instead of a "supports name resolution" Boolean and bitflags for types of
comments supported, provide a list of block types that the file
type/subtype supports, with each block type having a list of options
supported. Indicate whether "supported" means "one instance" or
"multiple instances".
"Supports" doesn't just mean "can be written", it also means "could be
read".
Rename WTAP_BLOCK_IF_DESCRIPTION to WTAP_BLOCK_IF_ID_AND_INFO, to
indicate that it provides, in addition to information about the
interface, an ID (implicitly, in pcapng files, by its ordinal number)
that is associated with every packet in the file. Emphasize that in
comments - just because your capture file format can list the interfaces
on which a capture was done, that doesn't mean it supports this; it
doesn't do so if the file doesn't indicate, for every packet, on which
of those interfaces it was captured (I'm looking at *you*, Microsoft
Network Monitor...).
Use APIs to query that information to do what the "does this file
type/subtype support name resolution information", "does this file
type/subtype support all of these comment types", and "does this file
type/subtype support - and require - interface IDs" APIs did.
Provide backwards compatibility for Lua.
This allows us to eliminate the WTAP_FILE_TYPE_SUBTYPE_ values for IBM's
iptrace; do so.
Provide a wiretap routine to get an array of all savable file
type/subtypes, sorted with pcap and pcapng at the top, followed by the
other types, sorted either by the name or the description.
Use that routine to list options for the -F flag for various commands
Rename wtap_get_savable_file_types_subtypes() to
wtap_get_savable_file_types_subtypes_for_file(), to indicate that it
provides an array of all file type/subtypes in which a given file can be
saved. Have it sort all types, other than the default type/subtype and,
if there is one, the "other" type (both of which are put at the top), by
the name or the description.
Don't allow wtap_register_file_type_subtypes() to override any existing
registrations; have them always register a new type. In that routine,
if there are any emply slots in the table, due to an entry being
unregistered, use it rather than allocating a new slot.
Don't allow unregistration of built-in types.
Rename the "dump open table" to the "file type/subtype table", as it has
entries for all types/subtypes, even if we can't write them.
Initialize that table in a routine that pre-allocates the GArray before
filling it with built-in types/subtypes, so it doesn't keep getting
reallocated.
Get rid of wtap_num_file_types_subtypes - it's just a copy of the size
of the GArray.
Don't have wtap_file_type_subtype_description() crash if handed an
file type/subtype that isn't a valid array index - just return NULL, as
we do with wtap_file_type_subtype_name().
In wtap_name_to_file_type_subtype(), don't use WTAP_FILE_TYPE_SUBTYPE_
names for the backwards-compatibility names - map those names to the
current names, and then look them up. This reduces the number of
uses of hardwired WTAP_FILE_TYPE_SUBTYPE_ values.
Clean up the type of wtap_module_count - it has no need to be a gulong.
Have built-in wiretap file handlers register names to be used for their
file type/subtypes, rather than building the table in init.lua.
Add a new Lua C function get_wtap_filetypes() to construct the
wtap_filetypes table, based on the registered names, and use it in
init.lua.
Add a #define WSLUA_INTERNAL_FUNCTION to register functions intended
only for internal use in init.lua, so they can be made available from
Lua without being documented.
Get rid of WTAP_NUM_FILE_TYPES_SUBTYPES - most code has no need to use
it, as it can just request arrays of types, and the space of
type/subtype codes can be sparse due to registration in any case, so
code has to be careful using it.
wtap_get_num_file_types_subtypes() is no longer used, so remove it. It
returns the number of elements in the file type/subtype array, which is
not necessarily the name of known file type/subtypes, as there may have
been some deregistered types, and those types do *not* get removed from
the array, they just get cleared so that they're available for future
allocation (we don't want the indices of any registered types to changes
if another type is deregistered, as those indicates are the type/subtype
values, so we can't shrink the array).
Clean up white space and remove some comments that shouldn't have been
added.
Remove most of the built-in file types from the table in
wiretap/file_access.c and, instead, have the file types register
themselves, using wtap_register_file_type_subtypes().
This reduces the source code changes needed to add a new file type from
three (add the handler, add the file type to the table in file_access.c,
add a #define for the file type in wiretap/wtap.h) to one (add the
handler). (It also requires adding the handler's source file to
wiretap/CMakeLists.txt, but that's required in both cases.)
A few remain because the WTAP_FILE_TYPE_SUBTYPE_ #define is used
elsewhere; that needs to be fixed.
Fix the wiretap/CMakefile.txt file to scan k12text.l, as that now
contains a registration routine. In the process, avoid scanning files
that don't implement a file type and won't ever have a registration
routine.
Add a Lua routine to fetch the total number of file types; we use that
in some code to construct the wtap_filetypes table, which we need to do
in order to continue to have all the values that used to come from the
WTAP_FILE_TYPE_SUBTYPE_ types.
While we're at it, add modelines to a file that lacked them.
Adds a pre-commit hook for detecting and replacing
occurrences of `g_malloc()` and `wmem_alloc()` with
`g_new()` and `wmem_new()`, to improve the
readability of Wireshark's code, and
occurrences of
`g_malloc(sizeof(struct myobj) * foo)`
with
`g_new(struct myobj, foo)`
to prevent integer overflows
Also fixes all existing occurrences across
the codebase.
Change all wireshark.org URLs to use https.
Fix some broken links while we're at it.
Change-Id: I161bf8eeca43b8027605acea666032da86f5ea1c
Reviewed-on: https://code.wireshark.org/review/34089
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That makes it - and the routines that implement it - work more like the
seek-read routine.
Change-Id: I0cace2d0e4c9ebfc21ac98fd1af1ec70f60a240d
Reviewed-on: https://code.wireshark.org/review/32727
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot
Reviewed-by: Guy Harris <guy@alum.mit.edu>
No UTF-8 patterns are in use. To avoid potential crashes on invalid
input, treat all lines as binary data in the dissector to match wiretap.
Change-Id: I10735c2246536fb4b2fdb9236cdbf7917d2e816c
Ping-Bug: 14905
Reviewed-on: https://code.wireshark.org/review/31938
Petri-Dish: Peter Wu <peter@lekensteyn.nl>
Tested-by: Petri Dish Buildbot
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
If, in the process of opening the input file, we determine that it has
packets of more than one link-layer type, we can catch attempts to write
that file to a file of a format that doesn't support more than one
link-layer type at the time we try to open the output file.
If, however, we don't discover that the file has more than one
link-layer type until we've already created the output file - for
example, if we have a pcapng file with a new IDB, with a different
link-layer type from previous IDBs, after packet blocks for the earlier
interfces - we can't catch that until we try to write the packet.
Currently, that causes the packet's data to be written out as is, so the
output file claims it's of the file's link-layer type, causing programs
reading the file to misdissect the packet.
Report WTAP_ERR_ENCAP_PER_PACKET_UNSUPPORTED on the write attempt
instead, and have a nicer error message for
WTAP_ERR_ENCAP_PER_PACKET_UNSUPPORTED on a write.
Change-Id: Ic41f2e4367cfe5667eb30c88cc6d3bfe422462f6
Reviewed-on: https://code.wireshark.org/review/30617
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Except in rare cases, we want to set it to -1 so that we let mktime()
determine whether DST/Summer Time was in effect at the given date and
time rather than pretending that we know whether it's in effect or not.
Change-Id: I0ea75317dd308a515cedf4d1260b583e1592cc9b
Reviewed-on: https://code.wireshark.org/review/27431
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Separate the stuff that any record could have from the stuff that only
particular record types have; put the latter into a union, and put all
that into a wtap_rec structure.
Add some record-type checks as necessary.
Change-Id: Id6b3486858f826fce4b096c59231f463e44bfaa2
Reviewed-on: https://code.wireshark.org/review/25696
Reviewed-by: Guy Harris <guy@alum.mit.edu>
The first is deprecated, as per https://spdx.org/licenses/.
Change-Id: I8e21e1d32d09b8b94b93a2dc9fbdde5ffeba6bed
Reviewed-on: https://code.wireshark.org/review/25661
Petri-Dish: Anders Broman <a.broman58@gmail.com>
Petri-Dish: Dario Lombardo <lomato@gmail.com>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
Use WTAP_MAX_PACKET_SIZE_STANDARD, set to 256KB, for everything except
for D-Bus captures. Use WTAP_MAX_PACKET_SIZE_DBUS, set to 128MB, for
them, because that's the largest possible D-Bus message size. See
https://bugs.freedesktop.org/show_bug.cgi?id=100220
for an example of the problems caused by limiting the snapshot length to
256KB for D-Bus.
Have a snapshot length of 0 in a capture_file structure mean "there is
no snapshot length for the file"; we don't need the has_snap field in
that case, a value of 0 mean "no, we don't have a snapshot length".
In dumpcap, start out with a pipe buffer size of 2KB, and grow it as
necessary. When checking for a too-big packet from a pipe, check
against the appropriate maximum - 128MB for DLT_DBUS, 256KB for
everything else.
Change-Id: Ib2ce7a0cf37b971fbc0318024fd011e18add8b20
Reviewed-on: https://code.wireshark.org/review/21952
Petri-Dish: Guy Harris <guy@alum.mit.edu>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Guy Harris <guy@alum.mit.edu>
And some comments in the case where we're converting the result of
time() - if your machine's idea of time predates January 1, 1970,
00:00:00 UTC, it'll crash on Windows, but that's not a case where a
*file* can cause the problem due either to a bad file time stamp or bad
time stamps in the file.
Change-Id: I837a438e4b875dd8c4f3ec2137df7a16ee4e9498
Reviewed-on: https://code.wireshark.org/review/18369
Reviewed-by: Guy Harris <guy@alum.mit.edu>
git/epan/dissectors/packet-a21.c:478:25: error: 'item' was marked unused but was used
[-Werror,-Wused-but-marked-unused]
proto_item_append_text(item, "%s", val_to_str_const(event_id, a21_event_vals, "Unknown"));
^
Added manual change id because file-jpeg.c forced the use of commit -n
Change-Id: Iffff53d6253758c8454d9583f0a11f317c8390cb
Reviewed-on: https://code.wireshark.org/review/14666
Reviewed-by: Jörg Mayer <jmayer@loplof.de>
When using UPPER_PDU to wrap logcat text data it was not possible
to dump underlying data to logcat textfiles.
Add ability to write it down properly.
Change-Id: Ia20142cc340f34d80de93e213084cf1df83099d6
Reviewed-on: https://code.wireshark.org/review/13230
Reviewed-by: Michael Mann <mmann78@netscape.net>
Petri-Dish: Michael Mann <mmann78@netscape.net>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Anders Broman <a.broman58@gmail.com>
It doesn't actually *close* any handle, so it's best called a "finish"
routine rather than a "close" routine.
In libwiretap modules, don't bother setting the finish routine pointer
to null - it's already initialized to null (it's probably best not to
require modules to set it).
Change-Id: I19554f3fb826db495f17b36600ae36222cbc21b0
Reviewed-on: https://code.wireshark.org/review/11659
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That indicates that it's a problem specific to *writing* capture files;
we've already converted some errors to that style, and added a new one
in that style.
Change-Id: I8268316fd8b1a9e301bf09ae970b4b1fbcb35c9d
Reviewed-on: https://code.wireshark.org/review/5826
Reviewed-by: Guy Harris <guy@alum.mit.edu>
For cases where record (meta)data is something that can't be written out
in a particular file format, return WTAP_ERR_UNWRITABLE_REC_DATA along
with an err_info string.
Report (and free) that err_info string in cases where
WTAP_ERR_UNWRITABLE_REC_DATA is returned.
Clean up some other error reporting cases, and flag with an XXX some
cases where we aren't reporting errors at all, while we're at it.
Change-Id: I91d02093af0d42c24ec4634c2c773b30f3d39ab3
Reviewed-on: https://code.wireshark.org/review/5823
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That makes it clearer what the problem is, and that it should only be
returned by the dump code path, not by the read code path.
Change-Id: I22d407efe3ae9fba7aa25f08f050317549866442
Reviewed-on: https://code.wireshark.org/review/5798
Reviewed-by: Guy Harris <guy@alum.mit.edu>
That makes it clearer what the problem is, and that it should only be
returned by the dump code path, not by the read code path.
Change-Id: Icc5c9cff43be6c073f0467607555fa7138c5d074
Reviewed-on: https://code.wireshark.org/review/5797
Reviewed-by: Guy Harris <guy@alum.mit.edu>
To avoid further duplication of work and bugfixing,
move regex strings to wiretap/logcat_text.h and include
this file in epan/dissectors/packet-logcat-text.c
Change-Id: I82773cda0e3240844139b104c68738ec82788014
Reviewed-on: https://code.wireshark.org/review/5410
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
In L, in line "-- beginning of /<buffer>" the "/" was removed.
This commit accomodates text logcat to that change.
Change-Id: I4cbfadf5a8169589f2848ce1a5793cea593ba459
Reviewed-on: https://code.wireshark.org/review/5405
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Clean up some things we ran across while making those changes.
Change-Id: Ic0d8943d36e6e120d7af0a6148fad98015d1e83e
Reviewed-on: https://code.wireshark.org/review/4581
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Pcap-ng files don't have a per-file time stamp resolution, they have a
per-interface time stamp resolution. Add new time stamp resolution
types of "unknown" and "per-packet", add the time stamp resolution to
struct wtap_pkthdr, have the libwiretap core initialize it to the
per-file time stamp resolution, and have pcap-ng do the same thing with
the resolution that it does with the packet encapsulation.
Get rid of the TS_PREC_AUTO_XXX values; just have TS_PREC_AUTO, which
means "use the packet's resolution to determine how many significant
digits to display". Rename all the WTAP_FILE_TSPREC_XXX values to
WTAP_TSPREC_XXX, as they're also used for per-packet values.
Change-Id: If9fd8f799b19836a5104aaa0870a951498886c69
Reviewed-on: https://code.wireshark.org/review/4349
Reviewed-by: Guy Harris <guy@alum.mit.edu>
Most interesting are:
warning: cannot optimize loop, the loop counter may overflow [-Wunsafe-loop-optimizations]
warning: ISO C forbids zero-size array [-Wpedantic]
warning: ISO C90 doesn't support unnamed structs/unions [-Wpedantic]
warning: cast discards '__attribute__((const))' qualifier from pointer target type [-Wcast-qual
warning: initializer element is not computable at load time [enabled by default]
Change-Id: I5573c6bdca856a304877d9bef643f8c0fa93cdaf
Reviewed-on: https://code.wireshark.org/review/3174
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Change-Id: Ied0778af9d5ff0e49c6efd4ea9411ae1a72cb8e5
Reviewed-on: https://code.wireshark.org/review/4190
Petri-Dish: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org>
Reviewed-by: Michael Mann <mmann78@netscape.net>
Reviewed-by: Alexis La Goutte <alexis.lagoutte@gmail.com>
Add all logcat format like brief, threadtime, long, etc. when try to save
logcat logs where there is EXPORTED_PDU layer.
Change-Id: I338f0bbd46dd8db984efc1c03980c7e9c7401a44
Reviewed-on: https://code.wireshark.org/review/4164
Reviewed-by: Michal Orynicz <michal.orynicz@tieto.com>
Reviewed-by: Michal Labedzki <michal.labedzki@tieto.com>
Tested-by: Michal Labedzki <michal.labedzki@tieto.com>
-1 means "I got an error reading this file, so there's no point in
trying any more open routines". It doesn't mean "I couldn't find any
matching pattern in the text"; that's 0, for "this isn't my type of
file, but keep trying".
Change-Id: I9d2e8b8fe6720052cacf70f0bacdcbc1175202cc
Reviewed-on: https://code.wireshark.org/review/3674
Reviewed-by: Guy Harris <guy@alum.mit.edu>
* fix exporting "beginning of" frame logs into info field
* add missing "Failure" level to regexp in wiretap part
* remove usage of GDateTime from wiretap part
Change-Id: Ibdea730623241cccbbc1694a34daa308e48c0a89
Reviewed-on: https://code.wireshark.org/review/3493
Reviewed-by: Pascal Quantin <pascal.quantin@gmail.com>
Wireshark already supports reading and writing logcat
logs saved in binary files. Binary format, although
better, is used less often than saving those logs to
text files.
This patch extends wireshark's support for android logcat
logs to reading and writing logcat logs in text files.
Features:
* support for tag, brief, process, thread, time, threadtime
and long formats
* saving in original format
* it's generally awesome
Change-Id: I013d6ac2da876d9a2b39b740219eb398d03830f6
Reviewed-on: https://code.wireshark.org/review/1802
Reviewed-by: Anders Broman <a.broman58@gmail.com>
João Valverde