1999-01-03 04:30:13 +00:00
|
|
|
/* iptrace.c
|
|
|
|
*
|
Add a new Wiretap encapsulation type WTAP_ENCAP_FDDI_BITSWAPPED, meaning
"FDDI with the MAC addresses bit-swapped"; whether the MAC addresses are
bit-swapped is a property of the machine on which the capture was taken,
not of the machine on which the capture is being read - right now, none
of the capture file formats we read indicate whether FDDI MAC addresses
are bit-swapped, but this does let us treat non-"libpcap" captures as
being bit-swapped or not bit-swapped independent of the machine on which
they're being read (and of the machine on which they were captured, but
I have the impression they're bit-swapped on most platforms), and allows
us to, if, as, and when we implement packet capture in Wiretap, mark
packets in a capture file written in Wiretap-native format based on the
machine on which they are captured (assuming the rule "Ultrix, Alpha,
and BSD/OS are the only platforms that don't bit-swap", or some other
compile-time rule, gets the right answer, or that some platform has
drivers that can tell us whether the addresses are bit-swapped).
(NOTE: if, for any of the capture file formats used only on one
platform, FDDI MAC addresses aren't bit-swapped, the code to read that
capture file format should be fixed to flag them as not bit-swapped.)
Use the encapsulation type to decide whether to bit-swap addresses in
"dissect_fddi()".
svn path=/trunk/; revision=557
1999-08-24 03:19:34 +00:00
|
|
|
* $Id: iptrace.c,v 1.9 1999/08/24 03:19:34 guy Exp $
|
1999-01-03 04:30:13 +00:00
|
|
|
*
|
|
|
|
* Wiretap Library
|
|
|
|
* Copyright (c) 1998 by Gilbert Ramirez <gram@verdict.uthscsa.edu>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
* as published by the Free Software Foundation; either version 2
|
|
|
|
* of the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
|
|
*
|
|
|
|
*/
|
1999-07-13 02:53:26 +00:00
|
|
|
#ifdef HAVE_CONFIG_H
|
|
|
|
#include "config.h"
|
|
|
|
#endif
|
1999-01-03 04:30:13 +00:00
|
|
|
#include <stdlib.h>
|
Have the per-capture-file-type open routines "wtap_open_offline()" calls
return 1 on success, -1 if they got an error, and 0 if the file isn't of
the type that file is checking for, and supply an error code if they
return -1; have "wtap_open_offline()" use that error code. Also, have
the per-capture-file-type open routines treat errors accessing the file
as errors, and return -1, rather than just returning 0 so that we try
another file type.
Have the per-capture-file-type read routines "wtap_loop()" calls return
-1 and supply an error code on error (and not, as they did in some
cases, call "g_error()" and abort), and have "wtap_loop()", if the read
routine returned an error, return FALSE (and pass an error-code-pointer
argument onto the read routines, so they fill it in), and return TRUE on
success.
Add some new error codes for them to return.
Now that "wtap_loop()" can return a success/failure indication and an
error code, in "read_cap_file()" put up a message box if we get an error
reading the file, and return the error code.
Handle the additional errors we can get when opening a capture file.
If the attempt to open a capture file succeeds, but the attempt to read
it fails, don't treat that as a complete failure - we may have managed
to read some of the capture file, and we should display what we managed
to read.
svn path=/trunk/; revision=516
1999-08-19 05:31:38 +00:00
|
|
|
#include <errno.h>
|
1999-01-03 04:30:13 +00:00
|
|
|
#include <time.h>
|
|
|
|
#include <string.h>
|
|
|
|
#include "wtap.h"
|
1999-03-01 18:57:07 +00:00
|
|
|
#include "buffer.h"
|
1999-01-03 04:30:13 +00:00
|
|
|
#include "iptrace.h"
|
|
|
|
|
Have the per-capture-file-type open routines "wtap_open_offline()" calls
return 1 on success, -1 if they got an error, and 0 if the file isn't of
the type that file is checking for, and supply an error code if they
return -1; have "wtap_open_offline()" use that error code. Also, have
the per-capture-file-type open routines treat errors accessing the file
as errors, and return -1, rather than just returning 0 so that we try
another file type.
Have the per-capture-file-type read routines "wtap_loop()" calls return
-1 and supply an error code on error (and not, as they did in some
cases, call "g_error()" and abort), and have "wtap_loop()", if the read
routine returned an error, return FALSE (and pass an error-code-pointer
argument onto the read routines, so they fill it in), and return TRUE on
success.
Add some new error codes for them to return.
Now that "wtap_loop()" can return a success/failure indication and an
error code, in "read_cap_file()" put up a message box if we get an error
reading the file, and return the error code.
Handle the additional errors we can get when opening a capture file.
If the attempt to open a capture file succeeds, but the attempt to read
it fails, don't treat that as a complete failure - we may have managed
to read some of the capture file, and we should display what we managed
to read.
svn path=/trunk/; revision=516
1999-08-19 05:31:38 +00:00
|
|
|
static int iptrace_read(wtap *wth, int *err);
|
|
|
|
|
|
|
|
int iptrace_open(wtap *wth, int *err)
|
1999-01-03 04:30:13 +00:00
|
|
|
{
|
|
|
|
int bytes_read;
|
|
|
|
char name[12];
|
|
|
|
|
|
|
|
fseek(wth->fh, 0, SEEK_SET);
|
Have the per-capture-file-type open routines "wtap_open_offline()" calls
return 1 on success, -1 if they got an error, and 0 if the file isn't of
the type that file is checking for, and supply an error code if they
return -1; have "wtap_open_offline()" use that error code. Also, have
the per-capture-file-type open routines treat errors accessing the file
as errors, and return -1, rather than just returning 0 so that we try
another file type.
Have the per-capture-file-type read routines "wtap_loop()" calls return
-1 and supply an error code on error (and not, as they did in some
cases, call "g_error()" and abort), and have "wtap_loop()", if the read
routine returned an error, return FALSE (and pass an error-code-pointer
argument onto the read routines, so they fill it in), and return TRUE on
success.
Add some new error codes for them to return.
Now that "wtap_loop()" can return a success/failure indication and an
error code, in "read_cap_file()" put up a message box if we get an error
reading the file, and return the error code.
Handle the additional errors we can get when opening a capture file.
If the attempt to open a capture file succeeds, but the attempt to read
it fails, don't treat that as a complete failure - we may have managed
to read some of the capture file, and we should display what we managed
to read.
svn path=/trunk/; revision=516
1999-08-19 05:31:38 +00:00
|
|
|
errno = WTAP_ERR_CANT_READ;
|
1999-01-03 04:30:13 +00:00
|
|
|
bytes_read = fread(name, 1, 11, wth->fh);
|
|
|
|
if (bytes_read != 11) {
|
Have the per-capture-file-type open routines "wtap_open_offline()" calls
return 1 on success, -1 if they got an error, and 0 if the file isn't of
the type that file is checking for, and supply an error code if they
return -1; have "wtap_open_offline()" use that error code. Also, have
the per-capture-file-type open routines treat errors accessing the file
as errors, and return -1, rather than just returning 0 so that we try
another file type.
Have the per-capture-file-type read routines "wtap_loop()" calls return
-1 and supply an error code on error (and not, as they did in some
cases, call "g_error()" and abort), and have "wtap_loop()", if the read
routine returned an error, return FALSE (and pass an error-code-pointer
argument onto the read routines, so they fill it in), and return TRUE on
success.
Add some new error codes for them to return.
Now that "wtap_loop()" can return a success/failure indication and an
error code, in "read_cap_file()" put up a message box if we get an error
reading the file, and return the error code.
Handle the additional errors we can get when opening a capture file.
If the attempt to open a capture file succeeds, but the attempt to read
it fails, don't treat that as a complete failure - we may have managed
to read some of the capture file, and we should display what we managed
to read.
svn path=/trunk/; revision=516
1999-08-19 05:31:38 +00:00
|
|
|
if (ferror(wth->fh)) {
|
|
|
|
*err = errno;
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
return 0;
|
1999-01-03 04:30:13 +00:00
|
|
|
}
|
|
|
|
name[11] = 0;
|
|
|
|
if (strcmp(name, "iptrace 2.0") != 0) {
|
Have the per-capture-file-type open routines "wtap_open_offline()" calls
return 1 on success, -1 if they got an error, and 0 if the file isn't of
the type that file is checking for, and supply an error code if they
return -1; have "wtap_open_offline()" use that error code. Also, have
the per-capture-file-type open routines treat errors accessing the file
as errors, and return -1, rather than just returning 0 so that we try
another file type.
Have the per-capture-file-type read routines "wtap_loop()" calls return
-1 and supply an error code on error (and not, as they did in some
cases, call "g_error()" and abort), and have "wtap_loop()", if the read
routine returned an error, return FALSE (and pass an error-code-pointer
argument onto the read routines, so they fill it in), and return TRUE on
success.
Add some new error codes for them to return.
Now that "wtap_loop()" can return a success/failure indication and an
error code, in "read_cap_file()" put up a message box if we get an error
reading the file, and return the error code.
Handle the additional errors we can get when opening a capture file.
If the attempt to open a capture file succeeds, but the attempt to read
it fails, don't treat that as a complete failure - we may have managed
to read some of the capture file, and we should display what we managed
to read.
svn path=/trunk/; revision=516
1999-08-19 05:31:38 +00:00
|
|
|
return 0;
|
1999-01-03 04:30:13 +00:00
|
|
|
}
|
|
|
|
|
Have the per-capture-file-type open routines "wtap_open_offline()" calls
return 1 on success, -1 if they got an error, and 0 if the file isn't of
the type that file is checking for, and supply an error code if they
return -1; have "wtap_open_offline()" use that error code. Also, have
the per-capture-file-type open routines treat errors accessing the file
as errors, and return -1, rather than just returning 0 so that we try
another file type.
Have the per-capture-file-type read routines "wtap_loop()" calls return
-1 and supply an error code on error (and not, as they did in some
cases, call "g_error()" and abort), and have "wtap_loop()", if the read
routine returned an error, return FALSE (and pass an error-code-pointer
argument onto the read routines, so they fill it in), and return TRUE on
success.
Add some new error codes for them to return.
Now that "wtap_loop()" can return a success/failure indication and an
error code, in "read_cap_file()" put up a message box if we get an error
reading the file, and return the error code.
Handle the additional errors we can get when opening a capture file.
If the attempt to open a capture file succeeds, but the attempt to read
it fails, don't treat that as a complete failure - we may have managed
to read some of the capture file, and we should display what we managed
to read.
svn path=/trunk/; revision=516
1999-08-19 05:31:38 +00:00
|
|
|
wth->file_type = WTAP_FILE_IPTRACE;
|
|
|
|
wth->subtype_read = iptrace_read;
|
|
|
|
return 1;
|
1999-01-03 04:30:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Read the next packet */
|
Have the per-capture-file-type open routines "wtap_open_offline()" calls
return 1 on success, -1 if they got an error, and 0 if the file isn't of
the type that file is checking for, and supply an error code if they
return -1; have "wtap_open_offline()" use that error code. Also, have
the per-capture-file-type open routines treat errors accessing the file
as errors, and return -1, rather than just returning 0 so that we try
another file type.
Have the per-capture-file-type read routines "wtap_loop()" calls return
-1 and supply an error code on error (and not, as they did in some
cases, call "g_error()" and abort), and have "wtap_loop()", if the read
routine returned an error, return FALSE (and pass an error-code-pointer
argument onto the read routines, so they fill it in), and return TRUE on
success.
Add some new error codes for them to return.
Now that "wtap_loop()" can return a success/failure indication and an
error code, in "read_cap_file()" put up a message box if we get an error
reading the file, and return the error code.
Handle the additional errors we can get when opening a capture file.
If the attempt to open a capture file succeeds, but the attempt to read
it fails, don't treat that as a complete failure - we may have managed
to read some of the capture file, and we should display what we managed
to read.
svn path=/trunk/; revision=516
1999-08-19 05:31:38 +00:00
|
|
|
static int iptrace_read(wtap *wth, int *err)
|
1999-01-03 04:30:13 +00:00
|
|
|
{
|
|
|
|
int bytes_read;
|
|
|
|
int data_offset;
|
|
|
|
guint16 packet_size;
|
|
|
|
guint8 header[40];
|
|
|
|
char if_name1, if_name2;
|
|
|
|
|
|
|
|
/* Read the descriptor data */
|
Have the per-capture-file-type open routines "wtap_open_offline()" calls
return 1 on success, -1 if they got an error, and 0 if the file isn't of
the type that file is checking for, and supply an error code if they
return -1; have "wtap_open_offline()" use that error code. Also, have
the per-capture-file-type open routines treat errors accessing the file
as errors, and return -1, rather than just returning 0 so that we try
another file type.
Have the per-capture-file-type read routines "wtap_loop()" calls return
-1 and supply an error code on error (and not, as they did in some
cases, call "g_error()" and abort), and have "wtap_loop()", if the read
routine returned an error, return FALSE (and pass an error-code-pointer
argument onto the read routines, so they fill it in), and return TRUE on
success.
Add some new error codes for them to return.
Now that "wtap_loop()" can return a success/failure indication and an
error code, in "read_cap_file()" put up a message box if we get an error
reading the file, and return the error code.
Handle the additional errors we can get when opening a capture file.
If the attempt to open a capture file succeeds, but the attempt to read
it fails, don't treat that as a complete failure - we may have managed
to read some of the capture file, and we should display what we managed
to read.
svn path=/trunk/; revision=516
1999-08-19 05:31:38 +00:00
|
|
|
errno = WTAP_ERR_CANT_READ;
|
1999-01-03 04:30:13 +00:00
|
|
|
bytes_read = fread(header, 1, 40, wth->fh);
|
|
|
|
if (bytes_read != 40) {
|
Have the per-capture-file-type open routines "wtap_open_offline()" calls
return 1 on success, -1 if they got an error, and 0 if the file isn't of
the type that file is checking for, and supply an error code if they
return -1; have "wtap_open_offline()" use that error code. Also, have
the per-capture-file-type open routines treat errors accessing the file
as errors, and return -1, rather than just returning 0 so that we try
another file type.
Have the per-capture-file-type read routines "wtap_loop()" calls return
-1 and supply an error code on error (and not, as they did in some
cases, call "g_error()" and abort), and have "wtap_loop()", if the read
routine returned an error, return FALSE (and pass an error-code-pointer
argument onto the read routines, so they fill it in), and return TRUE on
success.
Add some new error codes for them to return.
Now that "wtap_loop()" can return a success/failure indication and an
error code, in "read_cap_file()" put up a message box if we get an error
reading the file, and return the error code.
Handle the additional errors we can get when opening a capture file.
If the attempt to open a capture file succeeds, but the attempt to read
it fails, don't treat that as a complete failure - we may have managed
to read some of the capture file, and we should display what we managed
to read.
svn path=/trunk/; revision=516
1999-08-19 05:31:38 +00:00
|
|
|
if (ferror(wth->fh)) {
|
|
|
|
*err = errno;
|
|
|
|
return -1;
|
|
|
|
}
|
1999-08-20 04:07:09 +00:00
|
|
|
if (bytes_read != 0) {
|
|
|
|
*err = WTAP_ERR_SHORT_READ;
|
|
|
|
return -1;
|
|
|
|
}
|
1999-01-03 04:30:13 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
packet_size = pntohs(&header[2]) - 32;
|
|
|
|
|
|
|
|
/* Read the packet data */
|
1999-03-01 18:57:07 +00:00
|
|
|
buffer_assure_space(wth->frame_buffer, packet_size);
|
1999-01-03 04:30:13 +00:00
|
|
|
data_offset = ftell(wth->fh);
|
Have the per-capture-file-type open routines "wtap_open_offline()" calls
return 1 on success, -1 if they got an error, and 0 if the file isn't of
the type that file is checking for, and supply an error code if they
return -1; have "wtap_open_offline()" use that error code. Also, have
the per-capture-file-type open routines treat errors accessing the file
as errors, and return -1, rather than just returning 0 so that we try
another file type.
Have the per-capture-file-type read routines "wtap_loop()" calls return
-1 and supply an error code on error (and not, as they did in some
cases, call "g_error()" and abort), and have "wtap_loop()", if the read
routine returned an error, return FALSE (and pass an error-code-pointer
argument onto the read routines, so they fill it in), and return TRUE on
success.
Add some new error codes for them to return.
Now that "wtap_loop()" can return a success/failure indication and an
error code, in "read_cap_file()" put up a message box if we get an error
reading the file, and return the error code.
Handle the additional errors we can get when opening a capture file.
If the attempt to open a capture file succeeds, but the attempt to read
it fails, don't treat that as a complete failure - we may have managed
to read some of the capture file, and we should display what we managed
to read.
svn path=/trunk/; revision=516
1999-08-19 05:31:38 +00:00
|
|
|
errno = WTAP_ERR_CANT_READ;
|
1999-03-01 18:57:07 +00:00
|
|
|
bytes_read = fread(buffer_start_ptr(wth->frame_buffer), 1,
|
1999-01-03 04:30:13 +00:00
|
|
|
packet_size, wth->fh);
|
|
|
|
|
|
|
|
if (bytes_read != packet_size) {
|
Have the per-capture-file-type open routines "wtap_open_offline()" calls
return 1 on success, -1 if they got an error, and 0 if the file isn't of
the type that file is checking for, and supply an error code if they
return -1; have "wtap_open_offline()" use that error code. Also, have
the per-capture-file-type open routines treat errors accessing the file
as errors, and return -1, rather than just returning 0 so that we try
another file type.
Have the per-capture-file-type read routines "wtap_loop()" calls return
-1 and supply an error code on error (and not, as they did in some
cases, call "g_error()" and abort), and have "wtap_loop()", if the read
routine returned an error, return FALSE (and pass an error-code-pointer
argument onto the read routines, so they fill it in), and return TRUE on
success.
Add some new error codes for them to return.
Now that "wtap_loop()" can return a success/failure indication and an
error code, in "read_cap_file()" put up a message box if we get an error
reading the file, and return the error code.
Handle the additional errors we can get when opening a capture file.
If the attempt to open a capture file succeeds, but the attempt to read
it fails, don't treat that as a complete failure - we may have managed
to read some of the capture file, and we should display what we managed
to read.
svn path=/trunk/; revision=516
1999-08-19 05:31:38 +00:00
|
|
|
if (ferror(wth->fh))
|
|
|
|
*err = errno;
|
|
|
|
else
|
|
|
|
*err = WTAP_ERR_SHORT_READ;
|
1999-01-03 04:30:13 +00:00
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
wth->phdr.len = packet_size;
|
|
|
|
wth->phdr.caplen = packet_size;
|
|
|
|
wth->phdr.ts.tv_sec = pntohl(&header[32]);
|
|
|
|
/* AIX saves time in nsec, not usec. It's easier to make iptrace
|
|
|
|
* files more Unix-compliant here than try to get the calling
|
|
|
|
* program to know when to use nsec or usec */
|
|
|
|
wth->phdr.ts.tv_usec = pntohl(&header[36]) / 1000;
|
|
|
|
|
|
|
|
if_name1 = header[12];
|
|
|
|
if_name2 = header[13];
|
|
|
|
if (if_name1 == 't' && if_name2 == 'r') {
|
|
|
|
wth->phdr.pkt_encap = WTAP_ENCAP_TR;
|
|
|
|
}
|
|
|
|
else if (if_name1 == 'e' && if_name2 == 'n') {
|
|
|
|
wth->phdr.pkt_encap = WTAP_ENCAP_ETHERNET;
|
|
|
|
}
|
|
|
|
else if (if_name1 == 'f' && if_name2 == 'd') {
|
Add a new Wiretap encapsulation type WTAP_ENCAP_FDDI_BITSWAPPED, meaning
"FDDI with the MAC addresses bit-swapped"; whether the MAC addresses are
bit-swapped is a property of the machine on which the capture was taken,
not of the machine on which the capture is being read - right now, none
of the capture file formats we read indicate whether FDDI MAC addresses
are bit-swapped, but this does let us treat non-"libpcap" captures as
being bit-swapped or not bit-swapped independent of the machine on which
they're being read (and of the machine on which they were captured, but
I have the impression they're bit-swapped on most platforms), and allows
us to, if, as, and when we implement packet capture in Wiretap, mark
packets in a capture file written in Wiretap-native format based on the
machine on which they are captured (assuming the rule "Ultrix, Alpha,
and BSD/OS are the only platforms that don't bit-swap", or some other
compile-time rule, gets the right answer, or that some platform has
drivers that can tell us whether the addresses are bit-swapped).
(NOTE: if, for any of the capture file formats used only on one
platform, FDDI MAC addresses aren't bit-swapped, the code to read that
capture file format should be fixed to flag them as not bit-swapped.)
Use the encapsulation type to decide whether to bit-swap addresses in
"dissect_fddi()".
svn path=/trunk/; revision=557
1999-08-24 03:19:34 +00:00
|
|
|
wth->phdr.pkt_encap = WTAP_ENCAP_FDDI_BITSWAPPED;
|
1999-01-03 04:30:13 +00:00
|
|
|
}
|
1999-07-28 01:35:34 +00:00
|
|
|
else if (if_name1 == 'l' && if_name2 == 'o') { /* loopback */
|
|
|
|
wth->phdr.pkt_encap = WTAP_ENCAP_RAW_IP;
|
|
|
|
}
|
|
|
|
else if (if_name1 == 'x' && if_name2 == 'd') { /* X.25 */
|
|
|
|
wth->phdr.pkt_encap = WTAP_ENCAP_RAW_IP;
|
|
|
|
}
|
1999-01-03 04:30:13 +00:00
|
|
|
else {
|
1999-08-22 02:29:40 +00:00
|
|
|
g_message("iptrace: interface type %c%c unknown or unsupported",
|
|
|
|
if_name1, if_name2);
|
|
|
|
*err = WTAP_ERR_BAD_RECORD;
|
|
|
|
return -1;
|
1999-01-03 04:30:13 +00:00
|
|
|
}
|
|
|
|
return data_offset;
|
|
|
|
}
|