wireshark/caputils/capture-pcap-util-unix.c

315 lines
8.5 KiB
C
Raw Normal View History

/* capture-pcap-util-unix.c
* UN*X-specific utility routines for packet capture
*
* Wireshark - Network traffic analyzer
* By Gerald Combs <gerald@wireshark.org>
* Copyright 1998 Gerald Combs
*
* SPDX-License-Identifier: GPL-2.0-or-later
*/
#include "config.h"
#include <glib.h>
#include <ws_attributes.h>
#ifdef HAVE_LIBPCAP
#include "wspcap.h"
#ifdef __APPLE__
#include <dlfcn.h>
#endif
#ifdef HAVE_LIBCAP
# include <sys/capability.h>
#endif
#include "caputils/capture_ifinfo.h"
#include "caputils/capture-pcap-util.h"
#include "caputils/capture-pcap-util-int.h"
#ifdef HAVE_PCAP_REMOTE
GList *
get_remote_interface_list(const char *hostname, const char *port,
int auth_type, const char *username,
const char *passwd, int *err, char **err_str)
{
struct pcap_rmtauth auth;
char source[PCAP_BUF_SIZE];
char errbuf[PCAP_ERRBUF_SIZE];
GList *result;
if (pcap_createsrcstr(source, PCAP_SRC_IFREMOTE, hostname, port,
NULL, errbuf) == -1) {
*err = CANT_GET_INTERFACE_LIST;
if (err_str != NULL)
*err_str = cant_get_if_list_error_message(errbuf);
return NULL;
}
auth.type = auth_type;
auth.username = g_strdup(username);
auth.password = g_strdup(passwd);
result = get_interface_list_findalldevs_ex(source, &auth, err, err_str);
g_free(auth.username);
g_free(auth.password);
return result;
}
#endif
GList *
get_interface_list(int *err, char **err_str)
{
return get_interface_list_findalldevs(err, err_str);
}
/*
* Get an error message string for a CANT_GET_INTERFACE_LIST error from
* "get_interface_list()".
*/
gchar *
cant_get_if_list_error_message(const char *err_str)
{
return g_strdup_printf("Can't get list of interfaces: %s", err_str);
}
#ifdef HAVE_PCAP_SET_TSTAMP_PRECISION
/*
* Request high-resolution time stamps.
*
* We don't check for errors - if this fails, we just live with boring old
* microsecond-resolution time stamps. The only errors pcap_set_tstamp_precision()
* is documenting as returning are PCAP_ERROR_TSTAMP_PRECISION_NOTSUP, which just
* means we can't do nanosecond precision on this adapter, in which case we
* just live with whatever resolution we get by default, and
* PCAP_ERROR_ACTIVATED, which shouldn't happen as we shouldn't call this
* after we've activated the pcap_t.
*/
void
request_high_resolution_timestamp(pcap_t *pcap_h)
{
#ifdef __APPLE__
/*
* On macOS, if you build with a newer SDK, pcap_set_tstamp_precision()
* is available, so the code will be built with it.
*
* However, if you then try to run on an older release that
* doesn't have pcap_set_tstamp_precision(), the dynamic linker
* will fail, as it won't find pcap_set_tstamp_precision().
*
* libpcap doesn't use macOS "weak linking" for new routines,
* so we can't just check whether a pointer to
* pcap_set_tstamp_precision() is null and, if it is, not
* call it. We have to, instead, use dlopen() to load
* libpcap, and dlsym() to find a pointer to pcap_set_tstamp_precision(),
* and if we find the pointer, call it.
*/
static gboolean initialized = FALSE;
static int (*p_pcap_set_tstamp_precision)(pcap_t *, int);
if (!initialized) {
p_pcap_set_tstamp_precision =
(int (*)(pcap_t *, int))
dlsym(RTLD_NEXT, "pcap_set_tstamp_precision");
initialized = TRUE;
}
if (p_pcap_set_tstamp_precision != NULL)
(*p_pcap_set_tstamp_precision)(pcap_h, PCAP_TSTAMP_PRECISION_NANO);
#else /* __APPLE__ */
/*
* On other UN*Xes we require that we be run on an OS version
* with a libpcap equal to or later than the version with which
* we were built.
*/
pcap_set_tstamp_precision(pcap_h, PCAP_TSTAMP_PRECISION_NANO);
#endif /* __APPLE__ */
}
/*
* Return TRUE if the pcap_t in question is set up for high-precision
* time stamps, FALSE otherwise.
*/
gboolean
have_high_resolution_timestamp(pcap_t *pcap_h)
{
#ifdef __APPLE__
/*
* See above.
*/
static gboolean initialized = FALSE;
static int (*p_pcap_get_tstamp_precision)(pcap_t *);
if (!initialized) {
p_pcap_get_tstamp_precision =
(int (*)(pcap_t *))
dlsym(RTLD_NEXT, "pcap_get_tstamp_precision");
initialized = TRUE;
}
if (p_pcap_get_tstamp_precision != NULL)
return (*p_pcap_get_tstamp_precision)(pcap_h) == PCAP_TSTAMP_PRECISION_NANO;
else
return FALSE; /* Can't get implies couldn't set */
#else /* __APPLE__ */
/*
* On other UN*Xes we require that we be run on an OS version
* with a libpcap equal to or later than the version with which
* we were built.
*/
return pcap_get_tstamp_precision(pcap_h) == PCAP_TSTAMP_PRECISION_NANO;
#endif /* __APPLE__ */
}
#endif /* HAVE_PCAP_SET_TSTAMP_PRECISION */
Move more capture device handling to the caputils library. Move the code to open capture devices and get properties of capture devices there, joining the code to get a list of capture devices. This lets us do a better job of handling pcap_create() in WinPcap, including handling both WinPcap with pcap_create() and WinPcap without pcap_create() at run time, just in case somebody tries using WinPcap 3.x with a Wireshark built with WinPcap 4.x. It also could make it easier to use libpcap/WinPcap directly in Wireshark and TShark, if we have versions of libpcap/WinPcap that run small helper utilities to do privileged functions, allowing programs using them never to need elevated privileges themselves. That might make it easier to fix some issues with running TShark when not saving to a file (we could avoid the file entirely) and with delays when stopping a capture in Wireshark (Wireshark could stop writing to the file as soon as you click the stop button, rather than letting dumpcap do so when the signal gets to it). It might also make it easier to handle future versions of libpcap/WinPcap that support using pcap_create()/pcap_activate() for remote captures, and other future extensions to libpcap/WinPcap. Rename some XXX_linktype routines to XXX_datalink to indicate that they work with DLT_ values rather than LINKTYPE_ values; future versions of libpcap might use LINKTYPE_ values in newer APIs. Check for pcap_create() on all platforms in CMake. Change-Id: Ia12e1692c96ec945c07a135d246958771a29c817 Reviewed-on: https://code.wireshark.org/review/13062 Petri-Dish: Guy Harris <guy@alum.mit.edu> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Guy Harris <guy@alum.mit.edu>
2016-01-05 21:54:02 +00:00
if_capabilities_t *
get_if_capabilities_local(interface_options *interface_opts,
cap_device_open_err *err, char **err_str)
Move more capture device handling to the caputils library. Move the code to open capture devices and get properties of capture devices there, joining the code to get a list of capture devices. This lets us do a better job of handling pcap_create() in WinPcap, including handling both WinPcap with pcap_create() and WinPcap without pcap_create() at run time, just in case somebody tries using WinPcap 3.x with a Wireshark built with WinPcap 4.x. It also could make it easier to use libpcap/WinPcap directly in Wireshark and TShark, if we have versions of libpcap/WinPcap that run small helper utilities to do privileged functions, allowing programs using them never to need elevated privileges themselves. That might make it easier to fix some issues with running TShark when not saving to a file (we could avoid the file entirely) and with delays when stopping a capture in Wireshark (Wireshark could stop writing to the file as soon as you click the stop button, rather than letting dumpcap do so when the signal gets to it). It might also make it easier to handle future versions of libpcap/WinPcap that support using pcap_create()/pcap_activate() for remote captures, and other future extensions to libpcap/WinPcap. Rename some XXX_linktype routines to XXX_datalink to indicate that they work with DLT_ values rather than LINKTYPE_ values; future versions of libpcap might use LINKTYPE_ values in newer APIs. Check for pcap_create() on all platforms in CMake. Change-Id: Ia12e1692c96ec945c07a135d246958771a29c817 Reviewed-on: https://code.wireshark.org/review/13062 Petri-Dish: Guy Harris <guy@alum.mit.edu> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Guy Harris <guy@alum.mit.edu>
2016-01-05 21:54:02 +00:00
{
#ifdef HAVE_PCAP_CREATE
return get_if_capabilities_pcap_create(interface_opts, err, err_str);
Move more capture device handling to the caputils library. Move the code to open capture devices and get properties of capture devices there, joining the code to get a list of capture devices. This lets us do a better job of handling pcap_create() in WinPcap, including handling both WinPcap with pcap_create() and WinPcap without pcap_create() at run time, just in case somebody tries using WinPcap 3.x with a Wireshark built with WinPcap 4.x. It also could make it easier to use libpcap/WinPcap directly in Wireshark and TShark, if we have versions of libpcap/WinPcap that run small helper utilities to do privileged functions, allowing programs using them never to need elevated privileges themselves. That might make it easier to fix some issues with running TShark when not saving to a file (we could avoid the file entirely) and with delays when stopping a capture in Wireshark (Wireshark could stop writing to the file as soon as you click the stop button, rather than letting dumpcap do so when the signal gets to it). It might also make it easier to handle future versions of libpcap/WinPcap that support using pcap_create()/pcap_activate() for remote captures, and other future extensions to libpcap/WinPcap. Rename some XXX_linktype routines to XXX_datalink to indicate that they work with DLT_ values rather than LINKTYPE_ values; future versions of libpcap might use LINKTYPE_ values in newer APIs. Check for pcap_create() on all platforms in CMake. Change-Id: Ia12e1692c96ec945c07a135d246958771a29c817 Reviewed-on: https://code.wireshark.org/review/13062 Petri-Dish: Guy Harris <guy@alum.mit.edu> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Guy Harris <guy@alum.mit.edu>
2016-01-05 21:54:02 +00:00
#else
return get_if_capabilities_pcap_open_live(interface_opts, err, err_str);
Move more capture device handling to the caputils library. Move the code to open capture devices and get properties of capture devices there, joining the code to get a list of capture devices. This lets us do a better job of handling pcap_create() in WinPcap, including handling both WinPcap with pcap_create() and WinPcap without pcap_create() at run time, just in case somebody tries using WinPcap 3.x with a Wireshark built with WinPcap 4.x. It also could make it easier to use libpcap/WinPcap directly in Wireshark and TShark, if we have versions of libpcap/WinPcap that run small helper utilities to do privileged functions, allowing programs using them never to need elevated privileges themselves. That might make it easier to fix some issues with running TShark when not saving to a file (we could avoid the file entirely) and with delays when stopping a capture in Wireshark (Wireshark could stop writing to the file as soon as you click the stop button, rather than letting dumpcap do so when the signal gets to it). It might also make it easier to handle future versions of libpcap/WinPcap that support using pcap_create()/pcap_activate() for remote captures, and other future extensions to libpcap/WinPcap. Rename some XXX_linktype routines to XXX_datalink to indicate that they work with DLT_ values rather than LINKTYPE_ values; future versions of libpcap might use LINKTYPE_ values in newer APIs. Check for pcap_create() on all platforms in CMake. Change-Id: Ia12e1692c96ec945c07a135d246958771a29c817 Reviewed-on: https://code.wireshark.org/review/13062 Petri-Dish: Guy Harris <guy@alum.mit.edu> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Guy Harris <guy@alum.mit.edu>
2016-01-05 21:54:02 +00:00
#endif
}
pcap_t *
open_capture_device_local(capture_options *capture_opts
#ifndef HAVE_PCAP_CREATE
_U_
#endif
,
Move more capture device handling to the caputils library. Move the code to open capture devices and get properties of capture devices there, joining the code to get a list of capture devices. This lets us do a better job of handling pcap_create() in WinPcap, including handling both WinPcap with pcap_create() and WinPcap without pcap_create() at run time, just in case somebody tries using WinPcap 3.x with a Wireshark built with WinPcap 4.x. It also could make it easier to use libpcap/WinPcap directly in Wireshark and TShark, if we have versions of libpcap/WinPcap that run small helper utilities to do privileged functions, allowing programs using them never to need elevated privileges themselves. That might make it easier to fix some issues with running TShark when not saving to a file (we could avoid the file entirely) and with delays when stopping a capture in Wireshark (Wireshark could stop writing to the file as soon as you click the stop button, rather than letting dumpcap do so when the signal gets to it). It might also make it easier to handle future versions of libpcap/WinPcap that support using pcap_create()/pcap_activate() for remote captures, and other future extensions to libpcap/WinPcap. Rename some XXX_linktype routines to XXX_datalink to indicate that they work with DLT_ values rather than LINKTYPE_ values; future versions of libpcap might use LINKTYPE_ values in newer APIs. Check for pcap_create() on all platforms in CMake. Change-Id: Ia12e1692c96ec945c07a135d246958771a29c817 Reviewed-on: https://code.wireshark.org/review/13062 Petri-Dish: Guy Harris <guy@alum.mit.edu> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Guy Harris <guy@alum.mit.edu>
2016-01-05 21:54:02 +00:00
interface_options *interface_opts, int timeout,
cap_device_open_err *open_err, char (*open_err_str)[PCAP_ERRBUF_SIZE])
Move more capture device handling to the caputils library. Move the code to open capture devices and get properties of capture devices there, joining the code to get a list of capture devices. This lets us do a better job of handling pcap_create() in WinPcap, including handling both WinPcap with pcap_create() and WinPcap without pcap_create() at run time, just in case somebody tries using WinPcap 3.x with a Wireshark built with WinPcap 4.x. It also could make it easier to use libpcap/WinPcap directly in Wireshark and TShark, if we have versions of libpcap/WinPcap that run small helper utilities to do privileged functions, allowing programs using them never to need elevated privileges themselves. That might make it easier to fix some issues with running TShark when not saving to a file (we could avoid the file entirely) and with delays when stopping a capture in Wireshark (Wireshark could stop writing to the file as soon as you click the stop button, rather than letting dumpcap do so when the signal gets to it). It might also make it easier to handle future versions of libpcap/WinPcap that support using pcap_create()/pcap_activate() for remote captures, and other future extensions to libpcap/WinPcap. Rename some XXX_linktype routines to XXX_datalink to indicate that they work with DLT_ values rather than LINKTYPE_ values; future versions of libpcap might use LINKTYPE_ values in newer APIs. Check for pcap_create() on all platforms in CMake. Change-Id: Ia12e1692c96ec945c07a135d246958771a29c817 Reviewed-on: https://code.wireshark.org/review/13062 Petri-Dish: Guy Harris <guy@alum.mit.edu> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Guy Harris <guy@alum.mit.edu>
2016-01-05 21:54:02 +00:00
{
/*
* We're not opening a remote device; use pcap_create() and
* pcap_activate() if we have them, so that we can set various
* options, otherwise use pcap_open_live().
*/
#ifdef HAVE_PCAP_CREATE
return open_capture_device_pcap_create(capture_opts,
interface_opts, timeout, open_err, open_err_str);
Move more capture device handling to the caputils library. Move the code to open capture devices and get properties of capture devices there, joining the code to get a list of capture devices. This lets us do a better job of handling pcap_create() in WinPcap, including handling both WinPcap with pcap_create() and WinPcap without pcap_create() at run time, just in case somebody tries using WinPcap 3.x with a Wireshark built with WinPcap 4.x. It also could make it easier to use libpcap/WinPcap directly in Wireshark and TShark, if we have versions of libpcap/WinPcap that run small helper utilities to do privileged functions, allowing programs using them never to need elevated privileges themselves. That might make it easier to fix some issues with running TShark when not saving to a file (we could avoid the file entirely) and with delays when stopping a capture in Wireshark (Wireshark could stop writing to the file as soon as you click the stop button, rather than letting dumpcap do so when the signal gets to it). It might also make it easier to handle future versions of libpcap/WinPcap that support using pcap_create()/pcap_activate() for remote captures, and other future extensions to libpcap/WinPcap. Rename some XXX_linktype routines to XXX_datalink to indicate that they work with DLT_ values rather than LINKTYPE_ values; future versions of libpcap might use LINKTYPE_ values in newer APIs. Check for pcap_create() on all platforms in CMake. Change-Id: Ia12e1692c96ec945c07a135d246958771a29c817 Reviewed-on: https://code.wireshark.org/review/13062 Petri-Dish: Guy Harris <guy@alum.mit.edu> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Guy Harris <guy@alum.mit.edu>
2016-01-05 21:54:02 +00:00
#else
return open_capture_device_pcap_open_live(interface_opts, timeout,
open_err, open_err_str);
Move more capture device handling to the caputils library. Move the code to open capture devices and get properties of capture devices there, joining the code to get a list of capture devices. This lets us do a better job of handling pcap_create() in WinPcap, including handling both WinPcap with pcap_create() and WinPcap without pcap_create() at run time, just in case somebody tries using WinPcap 3.x with a Wireshark built with WinPcap 4.x. It also could make it easier to use libpcap/WinPcap directly in Wireshark and TShark, if we have versions of libpcap/WinPcap that run small helper utilities to do privileged functions, allowing programs using them never to need elevated privileges themselves. That might make it easier to fix some issues with running TShark when not saving to a file (we could avoid the file entirely) and with delays when stopping a capture in Wireshark (Wireshark could stop writing to the file as soon as you click the stop button, rather than letting dumpcap do so when the signal gets to it). It might also make it easier to handle future versions of libpcap/WinPcap that support using pcap_create()/pcap_activate() for remote captures, and other future extensions to libpcap/WinPcap. Rename some XXX_linktype routines to XXX_datalink to indicate that they work with DLT_ values rather than LINKTYPE_ values; future versions of libpcap might use LINKTYPE_ values in newer APIs. Check for pcap_create() on all platforms in CMake. Change-Id: Ia12e1692c96ec945c07a135d246958771a29c817 Reviewed-on: https://code.wireshark.org/review/13062 Petri-Dish: Guy Harris <guy@alum.mit.edu> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Guy Harris <guy@alum.mit.edu>
2016-01-05 21:54:02 +00:00
#endif
}
/*
* Get the versions of libpcap, libpcap, and libnl with which we were
* compiled, and append them to a GString.
*/
void
get_compiled_caplibs_version(GString *str)
{
/*
* NOTE: in *some* flavors of UN*X, the data from a shared
* library might be linked into executable images that are
* linked with that shared library, in which case you could
* look at pcap_version[] to get the version with which
* the program was compiled.
*
* In other flavors of UN*X, that doesn't happen, so
* pcap_version[] gives you the version the program is
* running with, not the version it was built with, and,
* in at least some of them, if the length of a data item
* referred to by the executable - such as the pcap_version[]
* string - isn't the same in the version of the library
* with which the program was built and the version with
* which it was run, the run-time linker will complain,
* which is Not Good.
*
* So, for now, we just give up on reporting the version
* of libpcap with which we were compiled.
*/
g_string_append(str, "with libpcap");
#ifdef HAVE_PCAP_REMOTE
/*
* We have remote pcap support in libpcap.
*/
g_string_append(str, " (including remote capture support)");
#endif
/*
* XXX - these libraries are actually used only by dumpcap,
* but we mention them here so that a user reporting a bug
* can get information about dumpcap's libraries without
* having to run dumpcap.
*/
/* LIBCAP */
g_string_append(str, ", ");
#ifdef HAVE_LIBCAP
g_string_append(str, "with POSIX capabilities");
#ifdef _LINUX_CAPABILITY_VERSION
g_string_append(str, " (Linux)");
#endif /* _LINUX_CAPABILITY_VERSION */
#else /* HAVE_LIBCAP */
g_string_append(str, "without POSIX capabilities");
#endif /* HAVE_LIBCAP */
#ifdef __linux__
/* This is a Linux-specific library. */
/* LIBNL */
g_string_append(str, ", ");
#if defined(HAVE_LIBNL1)
g_string_append(str, "with libnl 1");
#elif defined(HAVE_LIBNL2)
g_string_append(str, "with libnl 2");
#elif defined(HAVE_LIBNL3)
g_string_append(str, "with libnl 3");
#else /* no libnl */
g_string_append(str, "without libnl");
#endif /* libnl version */
#endif /* __linux__ */
}
/*
* Append the version of libpcap with which we we're running to a GString.
*/
void
get_runtime_caplibs_version(GString *str)
{
g_string_append_printf(str, "with ");
g_string_append(str, pcap_lib_version());
}
#else /* HAVE_LIBPCAP */
/*
* Append an indication that we were not compiled with libpcap
* to a GString. Don't even bother mentioning the other
* libraries.
*/
void
get_compiled_caplibs_version(GString *str)
{
g_string_append(str, "without libpcap");
}
/*
* Don't append anything, as we weren't even compiled to use libpcap.
*/
void
get_runtime_caplibs_version(GString *str _U_)
{
}
#endif /* HAVE_LIBPCAP */
/*
* Editor modelines - https://www.wireshark.org/tools/modelines.html
*
* Local variables:
* c-basic-offset: 8
* tab-width: 8
* indent-tabs-mode: t
* End:
*
* vi: set shiftwidth=8 tabstop=8 noexpandtab:
* :indentSize=8:tabSize=8:noTabs=false:
*/