wireshark/extcap.c

905 lines
26 KiB
C
Raw Normal View History

Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
/* extcap.h
*
* Routines for extcap external capture
* Copyright 2013, Mike Ryan <mikeryan@lacklustre.net>
*
* Wireshark - Network traffic analyzer
* By Gerald Combs <gerald@wireshark.org>
* Copyright 1998 Gerald Combs
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <config.h>
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#ifdef _WIN32
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#include <windows.h>
#include <process.h>
#include <time.h>
#else
/* Include for unlink */
#include <unistd.h>
#endif
#include <glib.h>
#include <log.h>
#include <wsutil/file_util.h>
#include <wsutil/filesystem.h>
#include <wsutil/tempfile.h>
#include "capture_opts.h"
#ifdef HAVE_EXTCAP
#include "extcap.h"
#include "extcap_parser.h"
#ifdef _WIN32
static HANDLE pipe_h = NULL;
#endif
/* internal container, for all the extcap interfaces that have been found.
* will be resetted by every call to extcap_interface_list() and is being
* used in extcap_get_if_* as well as extcap_init_interfaces to ensure,
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
* that only extcap interfaces are being given to underlying extcap programs
*/
static GHashTable *ifaces = NULL;
/* Callback definition for extcap_foreach */
typedef gboolean (*extcap_cb_t)(const gchar *extcap, gchar *output, void *data,
gchar **err_str);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
/* #define ARG_DEBUG */
#if ARG_DEBUG
static void extcap_debug_arguments ( extcap_arg *arg_iter );
#endif
static gboolean
extcap_if_exists(const char *ifname)
{
if ( ifname != NULL )
{
if ( ifaces != NULL )
{
if ( g_hash_table_size(ifaces) > 0 )
{
if ( g_hash_table_lookup(ifaces, (const gchar *)ifname) != NULL )
{
return TRUE;
}
}
}
}
return FALSE;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
static gboolean
extcap_if_exists_for_extcap(const char *ifname, const char *extcap)
{
gchar * entry = NULL;
if ( extcap_if_exists(ifname) )
{
if ( ( entry = (gchar *)g_hash_table_lookup(ifaces, (const gchar *)ifname) ) != NULL )
{
if ( strcmp(entry, extcap) == 0 )
return TRUE;
}
}
return FALSE;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
static gchar *
extcap_if_executable(const char *ifname)
{
if ( extcap_if_exists(ifname) )
return (gchar *)g_hash_table_lookup(ifaces, (const gchar *)ifname);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return (gchar *)NULL;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
static void
extcap_if_reset(void)
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
{
if (ifaces == NULL)
ifaces = g_hash_table_new_full(g_str_hash, g_str_equal, g_free, g_free);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_hash_table_remove_all(ifaces);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
static void
extcap_if_add(gchar *ifname, gchar *extcap)
{
if ( g_hash_table_lookup(ifaces, ifname) == NULL )
g_hash_table_insert(ifaces, ifname, extcap);
else {
g_free(ifname);
g_free(extcap);
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
/* Note: args does not need to be NULL-terminated. */
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
static void extcap_foreach(gint argc, gchar **args, extcap_cb_t cb,
void *cb_data, char **err_str, const char * ifname _U_) {
const char *dirname = get_extcap_dir();
GDir *dir;
const gchar *file;
gboolean keep_going;
gint i;
gchar **argv;
#ifdef _WIN32
gchar **dll_search_envp;
gchar *progfile_dir;
#endif
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
keep_going = TRUE;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
argv = (gchar **) g_malloc0(sizeof(gchar *) * (argc + 2));
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#ifdef _WIN32
/*
* Make sure executables can find dependent DLLs and that they're *our*
* DLLs: https://msdn.microsoft.com/en-us/library/windows/desktop/ms682586.aspx
* Alternatively we could create a simple wrapper exe similar to Create
* Hidden Process (http://www.commandline.co.uk/chp/).
*/
dll_search_envp = g_get_environ();
progfile_dir = g_strdup_printf("%s;%s", get_progfile_dir(), g_environ_getenv(dll_search_envp, "Path"));
dll_search_envp = g_environ_setenv(dll_search_envp, "Path", progfile_dir, TRUE);
g_free(progfile_dir);
#endif
if ((dir = g_dir_open(dirname, 0, NULL)) != NULL) {
GString *extcap_path = NULL;
extcap_path = g_string_new("");
while (keep_going && (file = g_dir_read_name(dir)) != NULL ) {
gchar *command_output = NULL;
gboolean status = FALSE;
gint exit_status = 0;
GError *error = NULL;
gchar **envp = NULL;
/* full path to extcap binary */
#ifdef _WIN32
g_string_printf(extcap_path, "%s\\%s", dirname, file);
envp = dll_search_envp;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#else
g_string_printf(extcap_path, "%s/%s", dirname, file);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#endif
if ( extcap_if_exists(ifname) && !extcap_if_exists_for_extcap(ifname, extcap_path->str ) )
continue;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#ifdef _WIN32
argv[0] = g_strescape(extcap_path->str, NULL);
#else
argv[0] = g_strdup(extcap_path->str);
#endif
for (i = 0; i < argc; ++i)
argv[i+1] = args[i];
argv[argc+1] = NULL;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
status = g_spawn_sync(dirname, argv, envp,
(GSpawnFlags) 0, NULL, NULL,
&command_output, NULL, &exit_status, &error);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (status && exit_status == 0)
keep_going = cb(extcap_path->str, command_output, cb_data, err_str);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_free(argv[0]);
g_free(command_output);
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_dir_close(dir);
g_string_free(extcap_path, TRUE);
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#ifdef _WIN32
g_strfreev(dll_search_envp);
#endif
g_free(argv);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
static gboolean dlt_cb(const gchar *extcap _U_, gchar *output, void *data,
char **err_str) {
extcap_token_sentence *tokens;
extcap_dlt *dlts, *dlt_iter, *next;
if_capabilities_t *caps;
GList *linktype_list = NULL;
data_link_info_t *data_link_info;
tokens = extcap_tokenize_sentences(output);
extcap_parse_dlts(tokens, &dlts);
extcap_free_tokenized_sentence_list(tokens);
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG, "Extcap pipe %s ", extcap);
/*
* Allocate the interface capabilities structure.
*/
caps = (if_capabilities_t *) g_malloc(sizeof *caps);
caps->can_set_rfmon = FALSE;
dlt_iter = dlts;
while (dlt_iter != NULL ) {
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG,
" DLT %d name=\"%s\" display=\"%s\" ", dlt_iter->number,
dlt_iter->name, dlt_iter->display);
data_link_info = g_new(data_link_info_t, 1);
data_link_info->dlt = dlt_iter->number;
data_link_info->name = g_strdup(dlt_iter->name);
data_link_info->description = g_strdup(dlt_iter->display);
linktype_list = g_list_append(linktype_list, data_link_info);
dlt_iter = dlt_iter->next_dlt;
}
/* Check to see if we built a list */
if (linktype_list != NULL && data != NULL) {
caps->data_link_types = linktype_list;
*(if_capabilities_t **) data = caps;
} else {
if (err_str) {
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG, " returned no DLTs");
*err_str = g_strdup("Extcap returned no DLTs");
}
g_free(caps);
}
dlt_iter = dlts;
while (dlt_iter != NULL ) {
next = dlt_iter->next_dlt;
extcap_free_dlt(dlt_iter);
dlt_iter = next;
}
return FALSE;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
if_capabilities_t *
extcap_get_if_dlts(const gchar *ifname, char **err_str) {
gchar *argv[3];
gint i;
if_capabilities_t *caps = NULL;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (ifname != NULL && err_str != NULL)
*err_str = NULL;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if ( extcap_if_exists(ifname) )
{
argv[0] = g_strdup(EXTCAP_ARGUMENT_LIST_DLTS);
argv[1] = g_strdup(EXTCAP_ARGUMENT_INTERFACE);
argv[2] = g_strdup(ifname);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (err_str)
*err_str = NULL;
extcap_foreach(3, argv, dlt_cb, &caps, err_str, ifname);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
for (i = 0; i < 3; ++i)
g_free(argv[i]);
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return caps;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
static gboolean interfaces_cb(const gchar *extcap, gchar *output, void *data,
char **err_str _U_) {
GList **il = (GList **) data;
extcap_token_sentence *tokens;
extcap_interface *interfaces, *int_iter; /*, *next; */
if_info_t *if_info;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
tokens = extcap_tokenize_sentences(output);
extcap_parse_interfaces(tokens, &interfaces);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
extcap_free_tokenized_sentence_list(tokens);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG, "Extcap pipe %s ", extcap);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
int_iter = interfaces;
while (int_iter != NULL ) {
if ( extcap_if_exists(int_iter->call) )
{
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_WARNING, "Extcap interface \"%s\" is already provided by \"%s\" ",
int_iter->call, (gchar *)extcap_if_executable(int_iter->call) );
int_iter = int_iter->next_interface;
continue;
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG, " Interface [%s] \"%s\" ",
int_iter->call, int_iter->display);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if_info = g_new0(if_info_t, 1);
if_info->name = g_strdup(int_iter->call);
if_info->friendly_name = g_strdup(int_iter->display);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if_info->type = IF_EXTCAP;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if_info->extcap = g_strdup(extcap);
*il = g_list_append(*il, if_info);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
extcap_if_add(g_strdup(int_iter->call), g_strdup(extcap) );
int_iter = int_iter->next_interface;
}
extcap_free_interface(interfaces);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return TRUE;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
static gint
if_info_compare(gconstpointer a, gconstpointer b)
{
gint comp = 0;
if_info_t * if_a = (if_info_t *)a;
if_info_t * if_b = (if_info_t *)b;
if ( (comp = g_strcmp0(if_a->name, if_b->name)) == 0 )
return g_strcmp0(if_a->friendly_name, if_b->friendly_name);
return comp;
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
GList *
extcap_interface_list(char **err_str) {
gchar *argv;
/* gint i; */
GList *ret = NULL;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (err_str != NULL)
*err_str = NULL;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
/* ifaces is used as cache, do not destroy its contents when
* returning or no extcap interfaces can be queried for options */
extcap_if_reset();
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
argv = g_strdup(EXTCAP_ARGUMENT_LIST_INTERFACES);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (err_str)
*err_str = NULL;
extcap_foreach(1, &argv, interfaces_cb, &ret, err_str, NULL);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_free(argv);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return g_list_sort ( ret, if_info_compare );
}
static void extcap_free_if_configuration(GList *list)
{
GList *elem, *sl;
for (elem = g_list_first(list); elem; elem = elem->next)
{
if (elem->data != NULL) {
/* g_list_free_full() only exists since 2.28. */
sl = g_list_first((GList *)elem->data);
g_list_foreach(sl, (GFunc)g_free, NULL);
g_list_free(sl);
}
}
g_list_free(list);
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
static gboolean search_cb(const gchar *extcap _U_, gchar *output, void *data,
char **err_str _U_) {
extcap_token_sentence *tokens = NULL;
GList *arguments = NULL;
GList **il = (GList **) data;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
tokens = extcap_tokenize_sentences(output);
arguments = extcap_parse_args(tokens);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
extcap_free_tokenized_sentence_list(tokens);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#if ARG_DEBUG
extcap_debug_arguments ( arguments );
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#endif
*il = g_list_append(*il, arguments);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
/* By returning false, extcap_foreach will break on first found */
return TRUE;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
GList *
extcap_get_if_configuration(const char * ifname) {
gchar *argv[3];
GList *ret = NULL;
gchar **err_str = NULL;
int i;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if ( extcap_if_exists(ifname) )
{
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG, "Extcap path %s",
get_extcap_dir());
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
argv[0] = g_strdup(EXTCAP_ARGUMENT_CONFIG);
argv[1] = g_strdup(EXTCAP_ARGUMENT_INTERFACE);
argv[2] = g_strdup(ifname);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
extcap_foreach(3, argv, search_cb, &ret, err_str, ifname);
for (i = 0; i < 3; i++)
g_free(argv[i]);
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return ret;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
gboolean
extcap_has_configuration(const char * ifname, gboolean is_required) {
GList * arguments = 0;
GList * walker = 0, * item = 0;
gboolean found = FALSE;
arguments = extcap_get_if_configuration((const char *)( ifname ) );
walker = g_list_first(arguments);
while ( walker != NULL && ! found )
{
item = g_list_first((GList *)(walker->data));
while ( item != NULL && ! found )
{
if ( (extcap_arg *)(item->data) != NULL )
{
/* Should required options be present, or any kind of options */
if ( ! is_required || ((extcap_arg *)(item->data))->is_required )
found = TRUE;
}
item = item->next;
}
walker = walker->next;
}
return found;
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
void extcap_cleanup(capture_options * capture_opts) {
interface_options interface_opts;
guint icnt = 0;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
for (icnt = 0; icnt < capture_opts->ifaces->len; icnt++) {
interface_opts = g_array_index(capture_opts->ifaces, interface_options,
icnt);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
/* skip native interfaces */
if (interface_opts.if_type != IF_EXTCAP)
continue;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG,
"Extcap [%s] - Cleaning up fifo: %s; PID: %d", interface_opts.name,
interface_opts.extcap_fifo, interface_opts.extcap_pid);
#ifdef _WIN32
if (pipe_h)
{
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG,
"Extcap [%s] - Closing pipe", interface_opts.name);
FlushFileBuffers(pipe_h);
DisconnectNamedPipe(pipe_h);
CloseHandle(pipe_h);
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#else
if (interface_opts.extcap_fifo != NULL && file_exists(interface_opts.extcap_fifo))
{
/* the fifo will not be freed here, but with the other capture_opts in capture_sync */
ws_unlink(interface_opts.extcap_fifo);
interface_opts.extcap_fifo = NULL;
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#endif
/* Maybe the client closed and removed fifo, but ws should check if
* pid should be closed */
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG,
"Extcap [%s] - Closing spawned PID: %d", interface_opts.name,
interface_opts.extcap_pid);
if (interface_opts.extcap_child_watch > 0)
{
g_source_remove(interface_opts.extcap_child_watch);
interface_opts.extcap_child_watch = 0;
}
if (interface_opts.extcap_pid != INVALID_EXTCAP_PID)
{
#ifdef _WIN32
TerminateProcess(interface_opts.extcap_pid, 0);
#endif
g_spawn_close_pid(interface_opts.extcap_pid);
interface_opts.extcap_pid = INVALID_EXTCAP_PID;
}
/* Make sure modified interface_opts is saved in capture_opts. */
capture_opts->ifaces = g_array_remove_index(capture_opts->ifaces, icnt);
g_array_insert_val(capture_opts->ifaces, icnt, interface_opts);
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
static void
extcap_arg_cb(gpointer key, gpointer value, gpointer data) {
GPtrArray *args = (GPtrArray *)data;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if ( key != NULL )
{
g_ptr_array_add(args, g_strdup((const gchar*)key));
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if ( value != NULL )
g_ptr_array_add(args, g_strdup((const gchar*)value));
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
static void extcap_child_watch_cb(GPid pid, gint status _U_, gpointer user_data)
{
guint i;
interface_options interface_opts;
capture_options *capture_opts = (capture_options *)user_data;
/* Close handle to child process. */
g_spawn_close_pid(pid);
/* Update extcap_pid in interface options structure. */
for (i = 0; i < capture_opts->ifaces->len; i++)
{
interface_opts = g_array_index(capture_opts->ifaces, interface_options, i);
if (interface_opts.extcap_pid == pid)
{
interface_opts.extcap_pid = INVALID_EXTCAP_PID;
interface_opts.extcap_child_watch = 0;
capture_opts->ifaces = g_array_remove_index(capture_opts->ifaces, i);
g_array_insert_val(capture_opts->ifaces, i, interface_opts);
break;
}
}
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
/* call mkfifo for each extcap,
* returns FALSE if there's an error creating a FIFO */
gboolean
extcap_init_interfaces(capture_options *capture_opts)
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
{
guint i;
interface_options interface_opts;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
for (i = 0; i < capture_opts->ifaces->len; i++)
{
GPtrArray *args = NULL;
GPid pid = INVALID_EXTCAP_PID;
gchar **tmp;
int tmp_i;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
interface_opts = g_array_index(capture_opts->ifaces, interface_options, i);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
/* skip native interfaces */
if (interface_opts.if_type != IF_EXTCAP )
continue;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
/* create pipe for fifo */
if ( ! extcap_create_pipe ( &interface_opts.extcap_fifo ) )
return FALSE;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
/* Create extcap call */
args = g_ptr_array_new();
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#define add_arg(X) g_ptr_array_add(args, g_strdup(X))
add_arg(interface_opts.extcap);
add_arg(EXTCAP_ARGUMENT_RUN_CAPTURE);
add_arg(EXTCAP_ARGUMENT_INTERFACE);
add_arg(interface_opts.name);
if (interface_opts.cfilter && strlen(interface_opts.cfilter) > 0) {
add_arg(EXTCAP_ARGUMENT_CAPTURE_FILTER);
add_arg(interface_opts.cfilter);
}
add_arg(EXTCAP_ARGUMENT_RUN_PIPE);
add_arg(interface_opts.extcap_fifo);
if (interface_opts.extcap_args == NULL)
{
/* User did not perform interface configuration.
*
* Check if there are any boolean flags that are set by default
* and hence their argument should be added.
*/
GList *arglist;
GList *elem;
arglist = extcap_get_if_configuration(interface_opts.name);
for (elem = g_list_first(arglist); elem; elem = elem->next)
{
GList * arg_list;
extcap_arg *arg_iter;
if (elem->data == NULL)
{
continue;
}
arg_list = g_list_first((GList *)elem->data);
while (arg_list != NULL)
{
/* In case of boolflags only first element in arg_list is relevant. */
arg_iter = (extcap_arg*) (arg_list->data);
if (arg_iter->arg_type == EXTCAP_ARG_BOOLFLAG)
{
if (arg_iter->default_complex != NULL
&& extcap_complex_get_bool(arg_iter->default_complex))
{
add_arg(arg_iter->call);
}
}
arg_list = arg_list->next;
}
}
extcap_free_if_configuration(arglist);
}
else
{
g_hash_table_foreach(interface_opts.extcap_args, extcap_arg_cb, args);
}
add_arg(NULL);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#undef add_arg
/* Dump commandline parameters sent to extcap. */
for (tmp = (gchar **)args->pdata, tmp_i = 0; *tmp && **tmp; ++tmp_i, ++tmp)
{
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG, "argv[%d]: %s", tmp_i, *tmp);
}
/* Wireshark for windows crashes here sometimes *
* Access violation reading location 0x... */
g_spawn_async(NULL, (gchar **)args->pdata, NULL,
(GSpawnFlags) G_SPAWN_DO_NOT_REAP_CHILD, NULL, NULL,
&pid,NULL);
g_ptr_array_foreach(args, (GFunc)g_free, NULL);
g_ptr_array_free(args, TRUE);
interface_opts.extcap_pid = pid;
interface_opts.extcap_child_watch =
g_child_watch_add(pid, extcap_child_watch_cb, (gpointer)capture_opts);
capture_opts->ifaces = g_array_remove_index(capture_opts->ifaces, i);
g_array_insert_val(capture_opts->ifaces, i, interface_opts);
#ifdef _WIN32
/* On Windows, wait for extcap to connect to named pipe.
* Some extcaps will present UAC screen to user.
* 30 second timeout should be reasonable timeout for extcap to
* connect to named pipe (including user interaction).
* Wait on multiple object in case of extcap termination
* without opening pipe.
*
* Minimum supported version of Windows: XP / Server 2003.
*/
if (pid != INVALID_EXTCAP_PID)
{
DWORD dw;
HANDLE handles[2];
OVERLAPPED ov;
ov.Pointer = 0;
ov.hEvent = CreateEvent(NULL, TRUE, FALSE, NULL);
ConnectNamedPipe(pipe_h, &ov);
handles[0] = ov.hEvent;
handles[1] = pid;
if (GetLastError() == ERROR_PIPE_CONNECTED)
{
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG, "extcap connected to pipe");
}
else
{
dw = WaitForMultipleObjects(2, handles, FALSE, 30000);
if (dw == WAIT_OBJECT_0)
{
/* ConnectNamedPipe finished. */
DWORD code;
code = GetLastError();
if (code == ERROR_IO_PENDING)
{
DWORD dummy;
if (!GetOverlappedResult(ov.hEvent, &ov, &dummy, TRUE))
{
code = GetLastError();
}
else
{
code = ERROR_SUCCESS;
}
}
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG, "ConnectNamedPipe code: %d", code);
}
else if (dw == (WAIT_OBJECT_0 + 1))
{
/* extcap process terminated. */
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG, "extcap terminated without connecting to pipe!");
}
else if (dw == WAIT_TIMEOUT)
{
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG, "extcap didn't connect to pipe within 30 seconds!");
}
else
{
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG, "WaitForMultipleObjects returned 0x%08X. Error %d", dw, GetLastError());
}
}
CloseHandle(ov.hEvent);
}
#endif
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return TRUE;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
#ifdef _WIN32
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
/* called by capture_sync to get the CreatNamedPipe handle*/
HANDLE
extcap_get_win32_handle()
{
return pipe_h;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
#endif
gboolean extcap_create_pipe(char ** fifo)
{
#ifdef _WIN32
gchar timestr[ 14+1 ];
time_t current_time;
gchar *pipename = NULL;
SECURITY_ATTRIBUTES security;
/* create pipename */
current_time = time(NULL);
strftime(timestr, sizeof(timestr), "%Y%m%d%H%M%S", localtime(&current_time));
pipename = g_strconcat ( "\\\\.\\pipe\\", EXTCAP_PIPE_PREFIX, "_", timestr, NULL );
/* Security struct to enable Inheritable HANDLE */
memset(&security, 0, sizeof(SECURITY_ATTRIBUTES));
security.nLength = sizeof(SECURITY_ATTRIBUTES);
security.bInheritHandle = TRUE;
security.lpSecurityDescriptor = NULL;
/* create a namedPipe*/
pipe_h = CreateNamedPipe(
utf_8to16(pipename),
PIPE_ACCESS_DUPLEX | FILE_FLAG_OVERLAPPED,
PIPE_TYPE_MESSAGE| PIPE_READMODE_MESSAGE | PIPE_WAIT,
5, 65536, 65536,
300,
&security);
if (pipe_h == INVALID_HANDLE_VALUE)
{
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG,"\nError creating pipe => (%d)", GetLastError());
return FALSE;
}
else
{
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG,"\nWireshark Created pipe =>(%s)",pipename);
*fifo = g_strdup(pipename);
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#else
gchar *temp_name = NULL;
int fd = 0;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if ((fd = create_tempfile(&temp_name, EXTCAP_PIPE_PREFIX)) < 0 )
return FALSE;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
ws_close(fd);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_log(LOG_DOMAIN_CAPTURE, G_LOG_LEVEL_DEBUG,
"Extcap - Creating fifo: %s", temp_name);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if ( file_exists(temp_name) )
ws_unlink(temp_name);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (mkfifo(temp_name, 0600) == 0)
*fifo = g_strdup(temp_name);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#endif
return TRUE;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
#if ARG_DEBUG
void extcap_debug_arguments ( extcap_arg *arg_iter )
{
extcap_value *v = NULL;
GList *walker = NULL;
printf("debug - parser dump\n");
while (arg_iter != NULL) {
printf("ARG %d call=%s display=\"%s\" type=", arg_iter->arg_num, arg_iter->call, arg_iter->display);
switch (arg_iter->arg_type) {
case EXTCAP_ARG_INTEGER:
printf("int\n");
break;
case EXTCAP_ARG_UNSIGNED:
printf("unsigned\n");
break;
case EXTCAP_ARG_LONG:
printf("long\n");
break;
case EXTCAP_ARG_DOUBLE:
printf("double\n");
break;
case EXTCAP_ARG_BOOLEAN:
printf("boolean\n");
break;
case EXTCAP_ARG_MENU:
printf("menu\n");
break;
case EXTCAP_ARG_RADIO:
printf("radio\n");
break;
case EXTCAP_ARG_SELECTOR:
printf("selctor\n");
break;
case EXTCAP_ARG_STRING:
printf ( "string\n" );
break;
case EXTCAP_ARG_MULTICHECK:
printf ( "unknown\n" );
break;
case EXTCAP_ARG_UNKNOWN:
printf ( "unknown\n" );
break;
}
if (arg_iter->range_start != NULL && arg_iter->range_end != NULL) {
printf("\tRange: ");
extcap_printf_complex(arg_iter->range_start);
printf(" - ");
extcap_printf_complex(arg_iter->range_end);
printf("\n");
}
for ( walker = g_list_first ( arg_iter->value_list ); walker; walker = walker->next )
{
v = (extcap_value *)walker->data;
if (v->is_default)
printf("*");
printf("\tcall=\"%p\" display=\"%p\"\n", v->call, v->display);
printf("\tcall=\"%s\" display=\"%s\"\n", v->call, v->display);
}
arg_iter = arg_iter->next_arg;
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
#endif
#endif
/*
* Editor modelines - http://www.wireshark.org/tools/modelines.html
*
* Local variables:
* c-basic-offset: 4
* tab-width: 8
* indent-tabs-mode: nil
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
* End:
*
* vi: set shiftwidth=4 tabstop=8 expandtab:
* :indentSize=4:tabSize=8:noTabs=true:
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
*/