Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
/* show_exception.c
|
|
|
|
*
|
|
|
|
* Routines to put exception information into the protocol tree
|
|
|
|
*
|
|
|
|
* Wireshark - Network traffic analyzer
|
|
|
|
* By Gerald Combs <gerald@wireshark.org>
|
|
|
|
* Copyright 2000 Gerald Combs
|
|
|
|
*
|
2018-02-08 16:59:17 +00:00
|
|
|
* SPDX-License-Identifier: GPL-2.0-or-later
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include "config.h"
|
|
|
|
|
|
|
|
#include <glib.h>
|
|
|
|
#include <epan/packet.h>
|
2013-11-10 15:59:37 +00:00
|
|
|
#include <epan/exceptions.h>
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
#include <epan/expert.h>
|
2015-07-17 01:54:38 +00:00
|
|
|
#include <epan/prefs.h>
|
|
|
|
#include <epan/prefs-int.h>
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
#include <epan/show_exception.h>
|
2016-07-26 02:58:09 +00:00
|
|
|
#include <wsutil/ws_printf.h> /* ws_g_warning */
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
|
|
|
|
static int proto_short = -1;
|
2013-07-02 20:43:21 +00:00
|
|
|
static int proto_malformed = -1;
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
static int proto_unreassembled = -1;
|
|
|
|
|
2013-09-08 18:35:36 +00:00
|
|
|
static expert_field ei_malformed_dissector_bug = EI_INIT;
|
|
|
|
static expert_field ei_malformed_reassembly = EI_INIT;
|
|
|
|
static expert_field ei_malformed = EI_INIT;
|
|
|
|
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
void
|
|
|
|
register_show_exception(void)
|
|
|
|
{
|
2013-09-08 18:35:36 +00:00
|
|
|
static ei_register_info ei[] = {
|
2013-10-09 12:56:19 +00:00
|
|
|
{ &ei_malformed_dissector_bug, { "_ws.malformed.dissector_bug", PI_MALFORMED, PI_ERROR, "Dissector bug", EXPFILL }},
|
|
|
|
{ &ei_malformed_reassembly, { "_ws.malformed.reassembly", PI_MALFORMED, PI_ERROR, "Reassembly error", EXPFILL }},
|
|
|
|
{ &ei_malformed, { "_ws.malformed.expert", PI_MALFORMED, PI_ERROR, "Malformed Packet (Exception occurred)", EXPFILL }},
|
2013-09-08 18:35:36 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
expert_module_t* expert_malformed;
|
|
|
|
|
2013-10-09 12:56:19 +00:00
|
|
|
proto_short = proto_register_protocol("Short Frame", "Short frame", "_ws.short");
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
proto_malformed = proto_register_protocol("Malformed Packet",
|
2013-10-09 12:56:19 +00:00
|
|
|
"Malformed packet", "_ws.malformed");
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
proto_unreassembled = proto_register_protocol(
|
|
|
|
"Unreassembled Fragmented Packet",
|
2013-10-09 12:56:19 +00:00
|
|
|
"Unreassembled fragmented packet", "_ws.unreassembled");
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
|
2013-09-08 18:35:36 +00:00
|
|
|
expert_malformed = expert_register_protocol(proto_malformed);
|
|
|
|
expert_register_field_array(expert_malformed, ei, array_length(ei));
|
|
|
|
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
/* "Short Frame", "Malformed Packet", and "Unreassembled Fragmented
|
|
|
|
Packet" aren't really protocols, they're error indications;
|
|
|
|
disabling them makes no sense. */
|
|
|
|
proto_set_cant_toggle(proto_short);
|
|
|
|
proto_set_cant_toggle(proto_malformed);
|
|
|
|
proto_set_cant_toggle(proto_unreassembled);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
show_exception(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree,
|
|
|
|
unsigned long exception, const char *exception_message)
|
|
|
|
{
|
|
|
|
static const char dissector_error_nomsg[] =
|
|
|
|
"Dissector writer didn't bother saying what the error was";
|
|
|
|
proto_item *item;
|
|
|
|
|
2013-04-21 06:14:11 +00:00
|
|
|
if (exception == ReportedBoundsError && pinfo->fragmented)
|
|
|
|
exception = FragmentBoundsError;
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
|
|
|
|
switch (exception) {
|
|
|
|
|
|
|
|
case ScsiBoundsError:
|
|
|
|
col_append_str(pinfo->cinfo, COL_INFO, "[SCSI transfer limited due to allocation_length too small]");
|
2013-09-08 18:35:36 +00:00
|
|
|
proto_tree_add_protocol_format(tree, proto_short, tvb, 0, 0,
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
"SCSI transfer limited due to allocation_length too small: %s truncated]", pinfo->current_proto);
|
|
|
|
/* Don't record ScsiBoundsError exceptions as expert events - they merely
|
|
|
|
* reflect a normal SCSI condition.
|
|
|
|
* (any case where it's caused by something else is a bug). */
|
|
|
|
break;
|
|
|
|
|
|
|
|
case BoundsError:
|
2015-07-17 01:54:38 +00:00
|
|
|
{
|
|
|
|
gboolean display_info = TRUE;
|
|
|
|
module_t * frame_module = prefs_find_module("frame");
|
|
|
|
if (frame_module != NULL)
|
|
|
|
{
|
|
|
|
pref_t *display_pref = prefs_find_preference(frame_module, "disable_packet_size_limited_in_summary");
|
|
|
|
if (display_pref)
|
|
|
|
{
|
2017-01-07 13:52:23 +00:00
|
|
|
if (prefs_get_bool_value(display_pref, pref_current))
|
2015-07-17 01:54:38 +00:00
|
|
|
display_info = FALSE;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (display_info)
|
|
|
|
col_append_str(pinfo->cinfo, COL_INFO, "[Packet size limited during capture]");
|
2013-09-08 18:35:36 +00:00
|
|
|
proto_tree_add_protocol_format(tree, proto_short, tvb, 0, 0,
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
"[Packet size limited during capture: %s truncated]", pinfo->current_proto);
|
|
|
|
/* Don't record BoundsError exceptions as expert events - they merely
|
|
|
|
* reflect a capture done with a snapshot length too short to capture
|
|
|
|
* all of the packet
|
|
|
|
* (any case where it's caused by something else is a bug). */
|
2015-07-17 01:54:38 +00:00
|
|
|
}
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
break;
|
|
|
|
|
2013-04-18 19:22:24 +00:00
|
|
|
case FragmentBoundsError:
|
|
|
|
col_append_fstr(pinfo->cinfo, COL_INFO, "[Unreassembled Packet%s]", pinfo->noreassembly_reason);
|
2013-09-08 18:35:36 +00:00
|
|
|
proto_tree_add_protocol_format(tree, proto_unreassembled,
|
2013-04-18 19:22:24 +00:00
|
|
|
tvb, 0, 0, "[Unreassembled Packet%s: %s]",
|
|
|
|
pinfo->noreassembly_reason, pinfo->current_proto);
|
|
|
|
/* Don't record FragmentBoundsError exceptions as expert events - they merely
|
|
|
|
* reflect dissection done with reassembly turned off
|
|
|
|
* (any case where it's caused by something else is a bug). */
|
|
|
|
break;
|
|
|
|
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
case ReportedBoundsError:
|
|
|
|
show_reported_bounds_error(tvb, pinfo, tree);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case DissectorError:
|
|
|
|
col_append_fstr(pinfo->cinfo, COL_INFO,
|
|
|
|
"[Dissector bug, protocol %s: %s]",
|
|
|
|
pinfo->current_proto,
|
|
|
|
exception_message == NULL ?
|
|
|
|
dissector_error_nomsg : exception_message);
|
|
|
|
item = proto_tree_add_protocol_format(tree, proto_malformed, tvb, 0, 0,
|
|
|
|
"[Dissector bug, protocol %s: %s]",
|
|
|
|
pinfo->current_proto,
|
|
|
|
exception_message == NULL ?
|
|
|
|
dissector_error_nomsg : exception_message);
|
2016-07-26 02:58:09 +00:00
|
|
|
ws_g_warning("Dissector bug, protocol %s, in packet %u: %s",
|
2016-01-24 03:40:51 +00:00
|
|
|
pinfo->current_proto, pinfo->num,
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
exception_message == NULL ?
|
|
|
|
dissector_error_nomsg : exception_message);
|
2013-09-09 01:02:44 +00:00
|
|
|
expert_add_info_format(pinfo, item, &ei_malformed_dissector_bug, "%s",
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
exception_message == NULL ?
|
|
|
|
dissector_error_nomsg : exception_message);
|
|
|
|
break;
|
|
|
|
|
2013-03-02 16:39:56 +00:00
|
|
|
case ReassemblyError:
|
|
|
|
col_append_fstr(pinfo->cinfo, COL_INFO,
|
|
|
|
"[Reassembly error, protocol %s: %s]",
|
|
|
|
pinfo->current_proto,
|
|
|
|
exception_message == NULL ?
|
|
|
|
dissector_error_nomsg : exception_message);
|
|
|
|
item = proto_tree_add_protocol_format(tree, proto_malformed, tvb, 0, 0,
|
|
|
|
"[Reassembly error, protocol %s: %s]",
|
|
|
|
pinfo->current_proto,
|
|
|
|
exception_message == NULL ?
|
|
|
|
dissector_error_nomsg : exception_message);
|
2013-09-09 01:02:44 +00:00
|
|
|
expert_add_info_format(pinfo, item, &ei_malformed_reassembly, "%s",
|
2013-03-02 16:39:56 +00:00
|
|
|
exception_message == NULL ?
|
|
|
|
dissector_error_nomsg : exception_message);
|
|
|
|
break;
|
|
|
|
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
default:
|
|
|
|
/* XXX - we want to know, if an unknown exception passed until here, don't we? */
|
|
|
|
g_assert_not_reached();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
show_reported_bounds_error(tvbuff_t *tvb, packet_info *pinfo, proto_tree *tree)
|
|
|
|
{
|
|
|
|
proto_item *item;
|
|
|
|
|
2013-04-21 03:22:30 +00:00
|
|
|
col_append_str(pinfo->cinfo, COL_INFO,
|
|
|
|
"[Malformed Packet]");
|
|
|
|
item = proto_tree_add_protocol_format(tree, proto_malformed,
|
|
|
|
tvb, 0, 0, "[Malformed Packet: %s]", pinfo->current_proto);
|
2013-09-08 18:35:36 +00:00
|
|
|
expert_add_info(pinfo, item, &ei_malformed);
|
Move show_exception() and show_reported_bounds_error() to
epan/show_exception.c, as it's used outside
epan/dissectors/packet-frame.c. Update their callers to include
<epan/show_exception.h> to get their declaration.
Add a CATCH_NONFATAL_ERRORS macro that catches all exceptions that, if
there's more stuff in the packet to dissect after the dissector call
that threw the exception, doesn't mean you shouldn't go ahead and
dissect that stuff. Use it in all those cases, including ones where
BoundsError was inappropriately being caught (you want those passed up
to the top level, so that the packet is reported as having been cut
short in the capture process).
Add a CATCH_BOUNDS_ERRORS macro that catches all exceptions that
correspond to running past the end of the data for a tvbuff; use it
rather than explicitly catching those exceptions individually, and
rather than just catching all exceptions (the only place that
DissectorError should be caught, for example, is at the top level, so
dissector bugs show up in the protocol tree).
Don't catch and then immediately rethrow exceptions without doing
anything else; just let the exceptions go up to the final catcher.
Use show_exception() to report non-fatal errors, rather than doing it
yourself.
If a dissector is called from Lua, catch all non-fatal errors and use
show_exception() to report them rather than catching only
ReportedBoundsError and adding a proto_malformed item.
Don't catch exceptions when constructing a trailer tvbuff in
packet-ieee8023.c - just construct it after the payload has been
dissected, and let whatever exceptions that throws be handled at the top
level.
Avoid some TRY/CATCH/ENDTRY cases by using checks such as
tvb_bytes_exist() before even looking in the tvbuff.
svn path=/trunk/; revision=47924
2013-02-27 22:43:54 +00:00
|
|
|
}
|
2014-10-10 14:41:10 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Editor modelines - http://www.wireshark.org/tools/modelines.html
|
|
|
|
*
|
|
|
|
* Local variables:
|
|
|
|
* c-basic-offset: 8
|
|
|
|
* tab-width: 8
|
|
|
|
* indent-tabs-mode: t
|
|
|
|
* End:
|
|
|
|
*
|
|
|
|
* vi: set shiftwidth=8 tabstop=8 noexpandtab:
|
|
|
|
* :indentSize=8:tabSize=8:noTabs=false:
|
|
|
|
*/
|