wireshark/extcap_parser.c

922 lines
27 KiB
C
Raw Normal View History

Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
/* extcap_parser.c
*
* Routines for extcap external capture
* Copyright 2013, Mike Ryan <mikeryan@lacklustre.net>
*
* Wireshark - Network traffic analyzer
* By Gerald Combs <gerald@wireshark.org>
* Copyright 1998 Gerald Combs
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <config.h>
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
#include <stdio.h>
#include <glib.h>
#include <string.h>
#include "extcap_parser.h"
void extcap_printf_complex(extcap_complex *comp) {
gchar *ret = extcap_get_complex_as_string(comp);
printf("%s", ret);
g_free(ret);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
gchar *extcap_get_complex_as_string(extcap_complex *comp) {
/* Pick an arbitrary size that should be big enough */
gchar *ret = g_new(gchar, 32);
if (comp == NULL) {
g_snprintf(ret, 32, "(null)");
return ret;
}
switch (comp->complex_type) {
case EXTCAP_ARG_INTEGER:
g_snprintf(ret, 32, "%d", comp->complex_value.int_value);
break;
case EXTCAP_ARG_UNSIGNED:
g_snprintf(ret, 32, "%u", comp->complex_value.uint_value);
break;
case EXTCAP_ARG_LONG:
g_snprintf(ret, 32, "%ld", comp->complex_value.long_value);
break;
case EXTCAP_ARG_DOUBLE:
g_snprintf(ret, 32, "%f", comp->complex_value.double_value);
break;
case EXTCAP_ARG_BOOLEAN:
g_snprintf(ret, 32, "%s",
comp->complex_value.bool_value ? "true" : "false");
break;
case EXTCAP_ARG_STRING:
case EXTCAP_ARG_PASSWORD:
case EXTCAP_ARG_FILESELECT:
g_free(ret);
ret = g_strdup(comp->complex_value.string_value);
break;
default:
/* Nulling out the return string */
g_snprintf(ret, 32, " ");
break;
}
return ret;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
extcap_complex *extcap_parse_complex(extcap_arg_type complex_type,
const gchar *data) {
extcap_complex *rc = g_new(extcap_complex, 1);
gboolean success = FALSE;
long double exp_f;
switch (complex_type) {
case EXTCAP_ARG_INTEGER:
if (sscanf(data, "%Lf", &exp_f) == 1) {
rc->complex_value.int_value = (int) exp_f;
success = TRUE;
break;
}
break;
case EXTCAP_ARG_UNSIGNED:
if (sscanf(data, "%Lf", &exp_f) == 1) {
rc->complex_value.uint_value = (unsigned int) exp_f;
success = TRUE;
break;
}
break;
case EXTCAP_ARG_LONG:
if (sscanf(data, "%Lf", &exp_f) == 1) {
rc->complex_value.long_value = (long) exp_f;
success = TRUE;
break;
}
break;
case EXTCAP_ARG_DOUBLE:
if (sscanf(data, "%Lf", &exp_f) == 1) {
rc->complex_value.double_value = (double) exp_f;
success = TRUE;
break;
}
break;
case EXTCAP_ARG_BOOLEAN:
case EXTCAP_ARG_BOOLFLAG:
if (data[0] == 't' || data[0] == 'T' || data[0] == '1') {
rc->complex_value.bool_value = 1;
} else {
rc->complex_value.bool_value = 0;
}
success = TRUE;
break;
case EXTCAP_ARG_STRING:
case EXTCAP_ARG_PASSWORD:
case EXTCAP_ARG_FILESELECT:
rc->complex_value.string_value = g_strdup(data);
success = TRUE;
break;
default:
break;
}
if (!success) {
g_free(rc);
return NULL ;
}
rc->complex_type = complex_type;
rc->value_filled = TRUE;
return rc;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
gboolean extcap_compare_is_default(extcap_arg *element, extcap_complex *test) {
gboolean result = FALSE;
if (element->default_complex == NULL)
return result;
switch (element->arg_type) {
case EXTCAP_ARG_INTEGER:
if (extcap_complex_get_int(test)
== extcap_complex_get_int(element->default_complex))
result = TRUE;
break;
case EXTCAP_ARG_UNSIGNED:
if (extcap_complex_get_uint(test)
== extcap_complex_get_uint(element->default_complex))
result = TRUE;
break;
case EXTCAP_ARG_LONG:
if (extcap_complex_get_long(test)
== extcap_complex_get_long(element->default_complex))
result = TRUE;
break;
case EXTCAP_ARG_DOUBLE:
if (extcap_complex_get_double(test)
== extcap_complex_get_double(element->default_complex))
result = TRUE;
break;
case EXTCAP_ARG_BOOLEAN:
case EXTCAP_ARG_BOOLFLAG:
if (extcap_complex_get_bool(test)
== extcap_complex_get_bool(element->default_complex))
result = TRUE;
break;
case EXTCAP_ARG_STRING:
case EXTCAP_ARG_PASSWORD:
if (strcmp(extcap_complex_get_string(test),
extcap_complex_get_string(element->default_complex)) == 0)
result = TRUE;
break;
default:
break;
}
return result;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
void extcap_free_complex(extcap_complex *comp) {
if (comp->complex_type == EXTCAP_ARG_STRING
|| comp->complex_type == EXTCAP_ARG_PASSWORD
|| comp->complex_type == EXTCAP_ARG_FILESELECT)
g_free(comp->complex_value.string_value);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_free(comp);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
int extcap_complex_get_int(extcap_complex *comp) {
if ( comp == NULL )
return (int)0;
return comp->complex_value.int_value;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
unsigned int extcap_complex_get_uint(extcap_complex *comp) {
if ( comp == NULL )
return (unsigned int)0;
return comp->complex_value.uint_value;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
long extcap_complex_get_long(extcap_complex *comp) {
if ( comp == NULL )
return (long)0;
return comp->complex_value.long_value;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
double extcap_complex_get_double(extcap_complex *comp) {
if ( comp == NULL )
return (double)0;
return comp->complex_value.double_value;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
gboolean extcap_complex_get_bool(extcap_complex *comp) {
if ( comp == NULL )
return FALSE;
return comp->complex_value.bool_value;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
gchar *extcap_complex_get_string(extcap_complex *comp) {
return comp->complex_value.string_value;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
void extcap_free_tokenized_param(extcap_token_param *v) {
if (v == NULL)
return;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (v->arg != NULL)
g_free(v->arg);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (v->value != NULL)
g_free(v->value);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_free(v);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
void extcap_free_tokenized_sentence(extcap_token_sentence *s) {
extcap_token_param *tv;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (s == NULL)
return;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (s->sentence != NULL)
g_free(s->sentence);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
while (s->param_list != NULL ) {
tv = s->param_list;
s->param_list = tv->next_token;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
extcap_free_tokenized_param(tv);
}
g_free(s);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
void extcap_free_tokenized_sentence_list(extcap_token_sentence *f) {
extcap_token_sentence *t;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
while (f != NULL ) {
t = f->next_sentence;
extcap_free_tokenized_sentence(f);
f = t;
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
extcap_token_sentence *extcap_tokenize_sentence(const gchar *s) {
extcap_token_param *tv = NULL;
GRegex * regex = NULL;
GMatchInfo * match_info = NULL;
GError * error = NULL;
extcap_token_sentence *rs = g_new(extcap_token_sentence, 1);
rs->sentence = NULL;
rs->next_sentence = NULL;
rs->param_list = NULL;
/* Regex for catching just the allowed values for sentences */
if ( ( regex = g_regex_new ( "^[\\t| ]*(arg|value|interface|extcap|dlt)(?=[\\t| ]+\\{)",
(GRegexCompileFlags) G_REGEX_CASELESS, (GRegexMatchFlags) 0, NULL ) ) != NULL ) {
g_regex_match ( regex, s, (GRegexMatchFlags) 0, &match_info );
if ( g_match_info_matches ( match_info ) )
rs->sentence = g_match_info_fetch(match_info, 0);
g_match_info_free ( match_info );
g_regex_unref ( regex );
}
/* No valid sentence found, exiting here */
if ( rs->sentence == NULL ) {
extcap_free_tokenized_sentence(rs);
return NULL;
}
/* Capture the argument and the value of the list. This will ensure,
* that regex patterns given to {validation=} are parsed correctly,
* as long as }{ does not occur within the pattern */
regex = g_regex_new ( "\\{([a-zA-Z_-]*?)\\=(.*?)\\}(?=\\{|$|\\s)",
(GRegexCompileFlags) G_REGEX_CASELESS, (GRegexMatchFlags) 0, NULL );
if ( regex != NULL ) {
g_regex_match_full(regex, s, -1, 0, (GRegexMatchFlags) 0, &match_info, &error );
while(g_match_info_matches(match_info)) {
gchar * arg = g_match_info_fetch ( match_info, 1 );
if ( arg == NULL )
break;
tv = g_new(extcap_token_param, 1);
tv->arg = arg;
tv->value = g_match_info_fetch ( match_info, 2 );
if (g_ascii_strcasecmp(tv->arg, "number") == 0) {
tv->param_type = EXTCAP_PARAM_ARGNUM;
} else if (g_ascii_strcasecmp(tv->arg, "call") == 0) {
tv->param_type = EXTCAP_PARAM_CALL;
} else if (g_ascii_strcasecmp(tv->arg, "display") == 0) {
tv->param_type = EXTCAP_PARAM_DISPLAY;
} else if (g_ascii_strcasecmp(tv->arg, "type") == 0) {
tv->param_type = EXTCAP_PARAM_TYPE;
} else if (g_ascii_strcasecmp(tv->arg, "arg") == 0) {
tv->param_type = EXTCAP_PARAM_ARG;
} else if (g_ascii_strcasecmp(tv->arg, "default") == 0) {
tv->param_type = EXTCAP_PARAM_DEFAULT;
} else if (g_ascii_strcasecmp(tv->arg, "value") == 0) {
tv->param_type = EXTCAP_PARAM_VALUE;
} else if (g_ascii_strcasecmp(tv->arg, "range") == 0) {
tv->param_type = EXTCAP_PARAM_RANGE;
} else if (g_ascii_strcasecmp(tv->arg, "tooltip") == 0) {
tv->param_type = EXTCAP_PARAM_TOOLTIP;
} else if (g_ascii_strcasecmp(tv->arg, "mustexist") == 0) {
tv->param_type = EXTCAP_PARAM_FILE_MUSTEXIST;
} else if (g_ascii_strcasecmp(tv->arg, "fileext") == 0) {
tv->param_type = EXTCAP_PARAM_FILE_EXTENSION;
} else if (g_ascii_strcasecmp(tv->arg, "name") == 0) {
tv->param_type = EXTCAP_PARAM_NAME;
} else if (g_ascii_strcasecmp(tv->arg, "enabled") == 0) {
tv->param_type = EXTCAP_PARAM_ENABLED;
} else if (g_ascii_strcasecmp(tv->arg, "parent") == 0) {
tv->param_type = EXTCAP_PARAM_PARENT;
} else if (g_ascii_strcasecmp(tv->arg, "required") == 0) {
tv->param_type = EXTCAP_PARAM_REQUIRED;
} else if (g_ascii_strcasecmp(tv->arg, "validation") == 0) {
tv->param_type = EXTCAP_PARAM_VALIDATION;
} else if (g_ascii_strcasecmp(tv->arg, "version") == 0) {
tv->param_type = EXTCAP_PARAM_VERSION;
} else {
tv->param_type = EXTCAP_PARAM_UNKNOWN;
}
tv->next_token = rs->param_list;
rs->param_list = tv;
g_match_info_next(match_info, &error);
}
g_match_info_free(match_info);
g_regex_unref(regex);
}
return rs;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
extcap_token_sentence *extcap_tokenize_sentences(const gchar *s) {
extcap_token_sentence *first = NULL, *cur = NULL, *last = NULL;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
gchar **list, **list_iter;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
list_iter = list = g_strsplit(s, "\n", 0);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
while (*list_iter != NULL ) {
cur = extcap_tokenize_sentence(*list_iter);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (cur != NULL) {
if (first == NULL) {
first = cur;
last = cur;
} else {
last->next_sentence = cur;
last = cur;
}
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
list_iter++;
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_strfreev(list);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return first;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
extcap_token_param *extcap_find_param_by_type(extcap_token_param *first,
extcap_param_type t) {
while (first != NULL ) {
if (first->param_type == t) {
return first;
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
first = first->next_token;
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return NULL ;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
void extcap_free_value(extcap_value *v) {
if (v == NULL)
return;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_free(v->call);
g_free(v->display);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_free(v);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
extcap_interface *extcap_new_interface(void) {
extcap_interface *r = g_new(extcap_interface, 1);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
r->call = r->display = r->version = NULL;
r->if_type = EXTCAP_SENTENCE_UNKNOWN;
r->next_interface = NULL;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return r;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
void extcap_free_interface(extcap_interface *i) {
extcap_interface *next_i = i;
while (i) {
next_i = i->next_interface;
if (i->call != NULL)
g_free(i->call);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (i->display != NULL)
g_free(i->display);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_free(i);
i = next_i;
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
extcap_dlt *extcap_new_dlt(void) {
extcap_dlt *r = g_new(extcap_dlt, 1);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
r->number = -1;
r->name = r->display = NULL;
r->next_dlt = NULL;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return r;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
void extcap_free_dlt(extcap_dlt *d) {
if (d == NULL)
return;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_free(d->name);
g_free(d->display);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
extcap_arg *extcap_new_arg(void) {
extcap_arg *r = g_new(extcap_arg, 1);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
r->call = NULL;
r->display = NULL;
r->tooltip = NULL;
r->arg_type = EXTCAP_ARG_UNKNOWN;
r->range_start = NULL;
r->range_end = NULL;
r->default_complex = NULL;
r->fileexists = FALSE;
r->fileextension = NULL;
r->regexp = NULL;
r->is_required = FALSE;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
r->values = NULL;
/*r->next_arg = NULL; */
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return r;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
static void extcap_free_valuelist(gpointer data, gpointer user_data _U_) {
extcap_free_value((extcap_value *) data);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
void extcap_free_arg(extcap_arg *a) {
if (a == NULL)
return;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_free(a->call);
g_free(a->display);
g_free(a->tooltip);
g_free(a->fileextension);
g_free(a->regexp);
if (a->range_start != NULL)
extcap_free_complex(a->range_start);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (a->range_end != NULL)
extcap_free_complex(a->range_end);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (a->default_complex != NULL)
extcap_free_complex(a->default_complex);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
g_list_foreach(a->values, (GFunc) extcap_free_valuelist, NULL);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
static void extcap_free_arg_list_cb(gpointer listentry, gpointer data _U_) {
if (listentry != NULL)
extcap_free_arg((extcap_arg *) listentry);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
void extcap_free_arg_list(GList *a) {
g_list_foreach(a, extcap_free_arg_list_cb, NULL);
g_list_free(a);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
static gint glist_find_numbered_arg(gconstpointer listelem, gconstpointer needle) {
if (((const extcap_arg *) listelem)->arg_num == *((const int*) needle))
return 0;
return 1;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
extcap_arg *extcap_parse_arg_sentence(GList * args, extcap_token_sentence *s) {
extcap_token_param *v = NULL;
extcap_arg *target_arg = NULL;
extcap_value *value = NULL;
GList * entry = NULL;
int tint;
extcap_sentence_type sent = EXTCAP_SENTENCE_UNKNOWN;
if (s == NULL)
return target_arg;
if (g_ascii_strcasecmp(s->sentence, "arg") == 0) {
sent = EXTCAP_SENTENCE_ARG;
/* printf("ARG sentence\n"); */
} else if (g_ascii_strcasecmp(s->sentence, "value") == 0) {
sent = EXTCAP_SENTENCE_VALUE;
/* printf("VALUE sentence\n"); */
}
if (sent == EXTCAP_SENTENCE_ARG) {
target_arg = extcap_new_arg();
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_ARGNUM))
== NULL) {
extcap_free_arg(target_arg);
return NULL ;
}
if (sscanf(v->value, "%d", &(target_arg->arg_num)) != 1) {
extcap_free_arg(target_arg);
return NULL ;
}
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_CALL))
== NULL) {
extcap_free_arg(target_arg);
return NULL ;
}
target_arg->call = g_strdup(v->value);
/* No value only parameters allowed */
if (strlen(target_arg->call) == 0) {
extcap_free_arg(target_arg);
return NULL ;
}
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_DISPLAY))
== NULL) {
extcap_free_arg(target_arg);
return NULL ;
}
target_arg->display = g_strdup(v->value);
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_TOOLTIP))
!= NULL) {
target_arg->tooltip = g_strdup(v->value);
}
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_FILE_MUSTEXIST))
!= NULL) {
target_arg->fileexists = (v->value[0] == 't' || v->value[0] == 'T');
}
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_FILE_EXTENSION))
!= NULL) {
target_arg->fileextension = g_strdup(v->value);
}
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_VALIDATION))
!= NULL) {
target_arg->regexp = g_strdup(v->value);
}
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_REQUIRED))
!= NULL) {
target_arg->is_required = (v->value[0] == 't' || v->value[0] == 'T');
}
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_TYPE))
== NULL) {
/* printf("no type in ARG sentence\n"); */
extcap_free_arg(target_arg);
return NULL ;
}
if (g_ascii_strcasecmp(v->value, "integer") == 0) {
target_arg->arg_type = EXTCAP_ARG_INTEGER;
} else if (g_ascii_strcasecmp(v->value, "unsigned") == 0) {
target_arg->arg_type = EXTCAP_ARG_UNSIGNED;
} else if (g_ascii_strcasecmp(v->value, "long") == 0) {
target_arg->arg_type = EXTCAP_ARG_LONG;
} else if (g_ascii_strcasecmp(v->value, "double") == 0) {
target_arg->arg_type = EXTCAP_ARG_DOUBLE;
} else if (g_ascii_strcasecmp(v->value, "boolean") == 0) {
target_arg->arg_type = EXTCAP_ARG_BOOLEAN;
} else if (g_ascii_strcasecmp(v->value, "boolflag") == 0) {
target_arg->arg_type = EXTCAP_ARG_BOOLFLAG;
} else if (g_ascii_strcasecmp(v->value, "selector") == 0) {
target_arg->arg_type = EXTCAP_ARG_SELECTOR;
} else if (g_ascii_strcasecmp(v->value, "radio") == 0) {
target_arg->arg_type = EXTCAP_ARG_RADIO;
} else if (g_ascii_strcasecmp(v->value, "string") == 0) {
target_arg->arg_type = EXTCAP_ARG_STRING;
} else if (g_ascii_strcasecmp(v->value, "password") == 0) {
target_arg->arg_type = EXTCAP_ARG_PASSWORD;
} else if (g_ascii_strcasecmp(v->value, "fileselect") == 0) {
target_arg->arg_type = EXTCAP_ARG_FILESELECT;
} else if (g_ascii_strcasecmp(v->value, "multicheck") == 0) {
target_arg->arg_type = EXTCAP_ARG_MULTICHECK;
} else {
printf("invalid type %s in ARG sentence\n", v->value);
extcap_free_arg(target_arg);
return NULL ;
}
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_RANGE))
!= NULL) {
gchar *cp = g_strstr_len(v->value, -1, ",");
if (cp == NULL) {
printf("invalid range, expected value,value got %s\n",
v->value);
extcap_free_arg(target_arg);
return NULL ;
}
if ((target_arg->range_start = extcap_parse_complex(
target_arg->arg_type, v->value)) == NULL) {
printf("invalid range, expected value,value got %s\n",
v->value);
extcap_free_arg(target_arg);
return NULL ;
}
if ((target_arg->range_end = extcap_parse_complex(
target_arg->arg_type, cp + 1)) == NULL) {
printf("invalid range, expected value,value got %s\n",
v->value);
extcap_free_arg(target_arg);
return NULL ;
}
}
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_DEFAULT))
!= NULL) {
if ((target_arg->default_complex = extcap_parse_complex(
target_arg->arg_type, v->value)) == NULL) {
printf("invalid default, couldn't parse %s\n", v->value);
}
}
} else if (sent == EXTCAP_SENTENCE_VALUE) {
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_ARG))
== NULL) {
printf("no arg in VALUE sentence\n");
return NULL ;
}
if (sscanf(v->value, "%d", &tint) != 1) {
printf("invalid arg in VALUE sentence\n");
return NULL ;
}
;
if ((entry = g_list_find_custom(args, &tint, glist_find_numbered_arg))
== NULL) {
printf("couldn't find arg %d in list for VALUE sentence\n", tint);
return NULL ;
}
value = g_new(extcap_value, 1);
value->display = NULL;
value->call = NULL;
value->enabled = FALSE;
value->is_default = FALSE;
value->arg_num = tint;
value->parent = NULL;
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_VALUE))
== NULL) {
/* printf("no value in VALUE sentence\n"); */
extcap_free_value(value);
return NULL ;
}
value->call = g_strdup(v->value);
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_DISPLAY))
== NULL) {
/* printf("no display in VALUE sentence\n"); */
extcap_free_value(value);
return NULL ;
}
value->display = g_strdup(v->value);
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_PARENT))
!= NULL) {
value->parent = g_strdup(v->value);
}
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_DEFAULT))
!= NULL) {
/* printf("found default value\n"); */
value->is_default = (v->value[0] == 't' || v->value[0] == 'T');
}
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_ENABLED))
!= NULL) {
value->enabled = (v->value[0] == 't' || v->value[0] == 'T');
}
((extcap_arg*) entry->data)->values = g_list_append(
((extcap_arg*) entry->data)->values, value);
return NULL ;
}
return target_arg;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
GList * extcap_parse_args(extcap_token_sentence *first_s) {
GList * args = NULL;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
while (first_s) {
extcap_arg *ra = NULL;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if ((ra = extcap_parse_arg_sentence(args, first_s)) != NULL)
args = g_list_append(args, (gpointer) ra);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
first_s = first_s->next_sentence;
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return args;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
int extcap_parse_interface_sentence(extcap_token_sentence *s,
extcap_interface **ri) {
extcap_token_param *v = NULL;
extcap_sentence_type sent = EXTCAP_SENTENCE_UNKNOWN;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
*ri = NULL;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (s == NULL)
return -1;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (g_ascii_strcasecmp(s->sentence, "interface") == 0) {
sent = EXTCAP_SENTENCE_INTERFACE;
} else if (g_ascii_strcasecmp(s->sentence, "extcap") == 0) {
sent = EXTCAP_SENTENCE_EXTCAP;
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (sent == EXTCAP_SENTENCE_UNKNOWN)
return -1;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
*ri = extcap_new_interface();
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
(*ri)->if_type = sent;
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_VALUE))
== NULL && sent == EXTCAP_SENTENCE_INTERFACE) {
printf("No value in INTERFACE sentence\n");
extcap_free_interface(*ri);
return -1;
}
if ( v != NULL )
(*ri)->call = g_strdup(v->value);
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_DISPLAY))
== NULL && sent == EXTCAP_SENTENCE_INTERFACE) {
printf("No display in INTERFACE sentence\n");
extcap_free_interface(*ri);
return -1;
}
if ( v != NULL )
(*ri)->display = g_strdup(v->value);
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_VERSION))
!= NULL) {
(*ri)->version = g_strdup(v->value);
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return 1;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
int extcap_parse_interfaces(extcap_token_sentence *first_s,
extcap_interface **first_int) {
extcap_interface *first_i = NULL, *last_i = NULL;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
while (first_s) {
extcap_interface *ri;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (extcap_parse_interface_sentence(first_s, &ri) >= 0 && ri != NULL) {
if (first_i == NULL) {
first_i = last_i = ri;
} else {
last_i->next_interface = ri;
last_i = ri;
}
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
first_s = first_s->next_sentence;
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
*first_int = first_i;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return 1;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
int extcap_parse_dlt_sentence(extcap_token_sentence *s, extcap_dlt **rd) {
extcap_token_param *v = NULL;
extcap_sentence_type sent = EXTCAP_SENTENCE_UNKNOWN;
*rd = NULL;
if (s == NULL)
return -1;
if (g_ascii_strcasecmp(s->sentence, "dlt") == 0) {
sent = EXTCAP_SENTENCE_DLT;
}
if (sent == EXTCAP_SENTENCE_UNKNOWN)
return -1;
*rd = extcap_new_dlt();
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_ARGNUM))
== NULL) {
printf("No number in DLT sentence\n");
extcap_free_dlt(*rd);
return -1;
}
if (sscanf(v->value, "%d", &((*rd)->number)) != 1) {
printf("Invalid number in DLT sentence\n");
extcap_free_dlt(*rd);
return -1;
}
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_NAME))
== NULL) {
printf("No name in DLT sentence\n");
extcap_free_dlt(*rd);
return -1;
}
(*rd)->name = g_strdup(v->value);
if ((v = extcap_find_param_by_type(s->param_list, EXTCAP_PARAM_DISPLAY))
== NULL) {
printf("No display in DLT sentence\n");
extcap_free_dlt(*rd);
return -1;
}
(*rd)->display = g_strdup(v->value);
return 1;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
int extcap_parse_dlts(extcap_token_sentence *first_s, extcap_dlt **first_dlt) {
extcap_dlt *first_d = NULL, *last_d = NULL;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
while (first_s) {
extcap_dlt *rd;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
if (extcap_parse_dlt_sentence(first_s, &rd) >= 0 && rd != NULL) {
if (first_d == NULL) {
first_d = last_d = rd;
} else {
last_d->next_dlt = rd;
last_d = rd;
}
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
first_s = first_s->next_sentence;
}
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
*first_dlt = first_d;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
return 1;
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
}
/*
* Editor modelines - http://www.wireshark.org/tools/modelines.html
*
* Local variables:
* c-basic-offset: 4
* tab-width: 8
* indent-tabs-mode: nil
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
* End:
*
* vi: set shiftwidth=4 tabstop=8 expandtab:
* :indentSize=4:tabSize=8:noTabs=true:
Extcap Capture Interface Extcap is a plugin interface, which allows for the usage of external capture interfaces via pipes using a predefined configuration language which results in a graphical gui. This implementation seeks for a generic implementation, which results in a seamless integration with the current system, and does add all external interfaces as simple interfaces. Windows Note: Due to limitations with GTK and Windows, a gspawn-winXX-helper.exe, respective gspawn-winXX-helper-console.exe is needed, which is part of any GTK windows installation. The default installation directory from the build is an extcap subdirectory underneath the run directory. The folder used by extcap may be viewed in the folders tab of the about dialog. The default installation directory for extcap plugins with a pre-build or installer version of wireshark is the extcap subdirectory underneath the main wireshark directory. For more information see: http://youtu.be/Nn84T506SwU bug #9009 Also take a look in doc/extcap_example.py for a Python-example and in extcap.pod for the arguments grammer. Todo: - Integrate with Qt - currently no GUI is generated, but the interfaces are still usable Change-Id: I4f1239b2f1ebd8b2969f73af137915f5be1ce50f Signed-off-by: Mike Ryan <mikeryan+wireshark@lacklustre.net> Signed-off-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Roland Knall <rknall@gmail.com> Reviewed-on: https://code.wireshark.org/review/359 Petri-Dish: Michael Mann <mmann78@netscape.net> Tested-by: Petri Dish Buildbot <buildbot-no-reply@wireshark.org> Reviewed-by: Michael Mann <mmann78@netscape.net>
2014-02-25 13:05:11 +00:00
*/