94 lines
2.5 KiB
Plaintext
94 lines
2.5 KiB
Plaintext
== MGCP Endpoints
|
|
|
|
MGCP organizes the switching resources in so called endpoints. Each endpoint is
|
|
referenced by its unique identifier. While RFC 3435 specifies a naming scheme, the
|
|
actual identifier naming is subject to the implementation and configuration.
|
|
|
|
=== RTP proxy / RTP bridge endpoints
|
|
|
|
OsmoMGW implements a freely configurable number of `rtpbridge` endpoints. Those
|
|
endpoints are able to host two connections at a time to model the functionality
|
|
of a tandem switch.
|
|
|
|
RTP bridge endpoint identifiers are referenced by the string `rtpbridge/`, a
|
|
hexadecimal number without leading zeros and a domain name (configurable).
|
|
|
|
----
|
|
rtpbridge/<number>@<domain>
|
|
----
|
|
|
|
.Example: List of virtual endpoints
|
|
----
|
|
rtpbridge/1@mgw
|
|
rtpbridge/2@mgw
|
|
rtpbridge/3@mgw
|
|
rtpbridge/4@mgw
|
|
rtpbridge/5@mgw
|
|
rtpbridge/6@mgw
|
|
rtpbridge/7@mgw
|
|
rtpbridge/8@mgw
|
|
rtpbridge/9@mgw
|
|
rtpbridge/a@mgw
|
|
rtpbridge/b@mgw
|
|
rtpbridge/c@mgw
|
|
rtpbridge/d@mgw
|
|
rtpbridge/e@mgw
|
|
rtpbridge/f@mgw
|
|
rtpbridge/10@mgw
|
|
----
|
|
|
|
=== E1/T1 endpoints
|
|
|
|
OsmoMGW supports E1 subslot multiplexing as specified by I.460. All possible
|
|
subslot combinations are mapped on individual endpoints. The endpoint names
|
|
are prefixed with `ds/e1-` followed by the trunk number and the E1 timeslot.
|
|
The subslot is defined by a bit rate and a bit offset.
|
|
|
|
----
|
|
ds/e1-<trunk>/s-<timeslot>/su<bitrate>-<bitoffset>@<domain>
|
|
----
|
|
|
|
.Example: List of endpoints on E1 trunk 0 at E1 timeslot 2
|
|
----
|
|
ds/e1-0/s-2/su64-0@mgw
|
|
ds/e1-0/s-2/su32-0@mgw
|
|
ds/e1-0/s-2/su32-4@mgw
|
|
ds/e1-0/s-2/su16-0@mgw
|
|
ds/e1-0/s-2/su16-2@mgw
|
|
ds/e1-0/s-2/su16-4@mgw
|
|
ds/e1-0/s-2/su16-6@mgw
|
|
ds/e1-0/s-2/su8-0@mgw
|
|
ds/e1-0/s-2/su8-1@mgw
|
|
ds/e1-0/s-2/su8-2@mgw
|
|
ds/e1-0/s-2/su8-3@mgw
|
|
ds/e1-0/s-2/su8-4@mgw
|
|
ds/e1-0/s-2/su8-5@mgw
|
|
ds/e1-0/s-2/su8-6@mgw
|
|
ds/e1-0/s-2/su8-7@mgw
|
|
----
|
|
|
|
When creating connections on endpoints that reside in one E1 timeslot the call
|
|
agent must make sure that no overlapping endpoints are used. It is for example
|
|
not possible to use `ds/e1-0/s-2/su16-2@mgw` and `ds/e1-0/s-2/su8-3@mgw` at the
|
|
same time because they overlap.
|
|
|
|
.Subslot overlapping
|
|
[options="header"]
|
|
|===
|
|
| Bit offset 4+| Subslots
|
|
| 0 | 8k .2+| 16k .4+| 32k .8+| 64k
|
|
| 1 | 8k
|
|
| 2 | 8k .2+| 16k
|
|
| 3 | 8k
|
|
| 4 | 8k .2+| 16k .4+| 32k
|
|
| 5 | 8k
|
|
| 6 | 8k .2+| 16k
|
|
| 7 | 8k
|
|
|===
|
|
|
|
NOTE: The current implementation (December 2020) only implements TRAU frame
|
|
encoding/decoding for 16K and 8K subslots. Endpoints with other bitrates are
|
|
not yet useable.
|
|
|
|
NOTE: the VTY command "show mgcp" can be used to get a list of all available
|
|
endpoints (including identifiers) |