Andreas Eversberg
423bc42429
Refactoring validity check and prefix processing of dialed number
...
Command line help shows how many digits and what prefixes can be dialed.
Giving a station ID via command line will be checked for being valid.
The number to call the mobile statione will be checked for being valid.
Prefixes that are defined for a nework will be removed from station ID
automatically.
Multiple station ID lengths are supported:
* C-Netz: 7 or 8 digits, depending on area code length
* A-Netz: 5 or 7 digits; number is truncated to last 5 digits.
* IMTS/MTS: 5 or 7 digits, depending on phone's selector switch.
2021-11-07 20:00:42 +01:00
Andreas Eversberg
6fa74a1296
Refactor global variables for signal processing
...
These are:
device, sample rate, buffer, latency
Called now:
dsp_device, dsp_samplerate, dsp_buffer, dsp_latency
Call audio device:
call_device, call_samplerate, call_buffer
2021-10-24 06:25:10 +02:00
Andreas Eversberg
3293dfb500
C-Netz: Fix calls to 8-digits subscriber numbers
2021-09-17 16:16:20 +02:00
Andreas Eversberg
3fce0403fd
C-Netz: Updated base station list
2021-09-17 16:16:10 +02:00
Martin Hauke
a07764f0d9
Fixed typos in cli output and source code comments
2021-01-03 09:57:03 +01:00
Andreas Eversberg
2cb2d5f3ac
Replaced MNCC by OSMO-CC
2020-12-29 11:11:41 +01:00
Andreas Eversberg
118b0260bc
C-Netz: Fix scheduling of frames when there is nothing to send
2020-12-21 08:38:44 +01:00
Andreas Eversberg
ed72e29dbb
Add tx-gain option
2020-10-29 07:39:27 +01:00
Andreas Eversberg
f468b2dd9f
C-Netz: Minor fixes
2020-10-29 07:36:14 +01:00
Andreas Eversberg
7189984bbb
C-Netz: At correct timeslot switch channel mode
...
Without this, the first BQ(K) message came to early, so that BSA 51
released when receiving ZFZ(K) one frame too early.
2020-10-29 07:35:50 +01:00
Andreas Eversberg
63a2bc8a6b
C-Netz: Allow dialing 8-digit numbers (FuVSt > 9)
2020-05-23 14:25:34 +02:00
Andreas Eversberg
89602822e6
C-Netz: Correct check for valid channel numbers
2020-02-18 19:03:03 +01:00
Andreas Eversberg
f132059edf
Add clock function to call interface
...
Implementations will have a clock to play tones, if no clock is
available from a transceiver.
2020-01-12 11:17:58 +01:00
Andreas Eversberg
570b2a5bca
C-Netz: Added new list of base station names and IDs
...
List contains 1991 and 1999 bwase stations
2020-01-04 09:22:02 +01:00
Andreas Eversberg
4cd9cb787e
C-Netz: --ms-power defines power level (not P-bits)
...
Also the level 8 can be selected. Actually level 6 is selected, but
reduced to 8 when making a call.
2020-01-02 09:45:33 +01:00
Andreas Eversberg
c2f14834e5
Rename dbm0 (level) to speech (level)
...
In mobile communications we use speech level instead of milliwatts.
The deviation (FM) is always based on speech level, not on 1 milliwatt.
2019-12-08 17:24:36 +01:00
Andreas Eversberg
360729d270
C-Netz: Added list of base station names and IDs
...
Automatic polarity detection is now done by using the polarity of last
transmitted message. We cannot use two base station IDs anymore, to
detect the polarity. Now we deal only with the defined base station ID.
2019-11-29 15:58:32 +01:00
Andreas Eversberg
008bca784b
C-Netz: Show if emergency call is made
2019-11-29 15:58:32 +01:00
Andreas Eversberg
6dd9999dc8
C-Netz: Fixup for broken Authentication patch
...
MT calls did not work.
2019-10-26 16:57:01 +02:00
Andreas Eversberg
d6579c1244
Allow giving alphanumeric channels (Prepare for IMTS)
2019-08-26 21:10:20 +02:00
Martin Hauke
75765d49b7
Fixed many typos in output and source code comments
2019-07-15 21:14:52 +02:00
Andreas Eversberg
13245c56f6
C-Netz: Add authentication support (process only)
...
No real authentication, since the algorithm and the keys inside the cards
are not known. A challenge can be specified and optionally the response
can be verified.
2019-06-30 14:51:01 +02:00
Andreas Eversberg
1321f66456
C-Netz: Add option to control voice deviation
2019-01-02 15:58:34 +01:00
Andreas Eversberg
40aec4f14c
C-Netz: Swtitch speech scrambler only after receiving 3 consecutive frames with different scrambler mode
2018-07-01 09:18:07 +02:00
Andreas Eversberg
3a5fa8837c
Improved emphasis
2018-02-16 15:54:39 +01:00
Andreas Eversberg
1a341f6b4e
Restructure: Move debug from common code to 'libdebug'
2017-12-03 08:45:58 +01:00
Andreas Eversberg
ab59a26a51
Restructure: Move mobile from common code to 'libmobile'
2017-12-03 08:45:54 +01:00
Andreas Eversberg
ed31a26eba
Restructure: Move sample from common code to 'libsample'
2017-12-03 08:45:48 +01:00
Andreas Eversberg
7b539d5dc7
Restructure: Move mncc from common code to 'libmncc'
2017-11-25 19:28:33 +01:00
Andreas Eversberg
b605da1aff
Restructure: Move timer from common code to 'libtimer'
2017-11-13 20:00:52 +01:00
Andreas Eversberg
ee3fbeb03b
Split call control from built-in call console by using MNCC layer
2017-11-05 16:58:31 +01:00
Andreas Eversberg
b32e0ab602
Implementation of RX level squelch (for A-Netz and B-Netz)
...
Use -S <dB> for setting RF level or use -S auto for auto level.
When squelch closes, audio is muted. If squelch is closed for some
seconds (depending on network), call is released. (RF loss condition)
The previous loss detection has been removed
2017-10-22 19:23:08 +02:00
Andreas Eversberg
f7a0e4622b
Display channel offset with TX and RX channel frequencies on startup
2017-10-22 19:23:06 +02:00
Andreas Eversberg
dfdad21e3f
C-Netz: Work on system informations, metering and call queues
...
- Make system informations configurable
- Simulate call mertering
- Support for call queues on busy voice channels
2017-09-01 18:42:51 +02:00
Andreas Eversberg
8ce3ff455d
Add incoming answer to call control, also allow to send recall tone
2017-08-09 17:27:08 +02:00
Andreas Eversberg
538b4a42ec
Add wave file playback to replace TX audio
2017-07-15 07:38:16 +02:00
Andreas Eversberg
57d4d1739e
AMPS/C-Netz: Correctly release pending transaction when creating a new one
...
If transactions is created, look on all channels for pending transaction
with same subscriber.
1. Remove that transaction.
2. Make channel return to IDLE.
3. Release call, if callref exists.
2017-06-10 13:08:22 +02:00
Andreas Eversberg
6adfcf7466
Status display
...
Alows to show status of current channels and users
2017-06-10 13:08:21 +02:00
Andreas Eversberg
76a3484c5c
C-Netz: Make demodulation algorithm (slope or leve) slectable via option
...
By default (auto), the algorithm is selected, depending on sound card
or SDR usage. For testing and debugging purpose, the algorithm can be
forced.
2017-05-19 19:11:59 +02:00
Andreas Eversberg
ef7ff26793
C-Netz: SDR now uses zero-crossing to detect level changes.
...
This does not work with analog radio, but with SDR it works.
The quality should be better and the process is faster.
2017-05-17 20:06:46 +02:00
Andreas Eversberg
4d10ee7c82
No "sdr" audio device option required anymore (when using SDR)
2017-05-17 20:06:42 +02:00
Andreas Eversberg
3fb2ade352
C-Netz: Fix release of call process when no dialing was received from phone
2017-02-18 21:02:48 +01:00
Andreas Eversberg
0611f62b52
Show channel number and basic info when channel was created
2017-02-18 21:02:47 +01:00
Andreas Eversberg
8cb0187133
C-Netz: Remove the obviously useless noise function for unused timeslots
2017-02-18 21:01:17 +01:00
Andreas Eversberg
71e556e7ff
Work on emphasis filter: Neutral @ 1000 Hz; Use filter before de-emphasis
2017-02-18 21:01:11 +01:00
Andreas Eversberg
7ea3bc188d
Move samples of int16_t format to sample_t, that is of type double
...
This prepares the correction of all levels
2017-02-18 21:01:08 +01:00
Andreas Eversberg
8b9277615d
Neu structure for the paging process (B-Netz)
...
Paging tones are not created within sound_alsa.c
The audio API is now responsible to switch to paging channel.
In case of SDR, the sdr.c will switch frequency offset.
2017-02-18 21:00:50 +01:00
Andreas Eversberg
9ff8c3bb25
Rework on audio interface
...
Sound instance is now called audio instance and uses funcation pointers.
This gives a clean interface to be exchanged with other technologies,
linke SDR.
2017-02-18 21:00:45 +01:00
Andreas Eversberg
d54d3ac265
prepare audio handling for multi carrier SDR
2017-01-07 06:28:24 +01:00
Andreas Eversberg
7585f9c22d
Add function to change dsp state, more debug with channel info
2016-12-09 16:34:33 +01:00