627 lines
25 KiB
C
627 lines
25 KiB
C
/* ----------------------------------------------------------------------------
|
||
* ATMEL Microcontroller Software Support
|
||
* ----------------------------------------------------------------------------
|
||
* Copyright (c) 2008, Atmel Corporation
|
||
*
|
||
* All rights reserved.
|
||
*
|
||
* Redistribution and use in source and binary forms, with or without
|
||
* modification, are permitted provided that the following conditions are met:
|
||
*
|
||
* - Redistributions of source code must retain the above copyright notice,
|
||
* this list of conditions and the disclaimer below.
|
||
*
|
||
* Atmel's name may not be used to endorse or promote products derived from
|
||
* this software without specific prior written permission.
|
||
*
|
||
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
||
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
* ----------------------------------------------------------------------------
|
||
*/
|
||
|
||
//------------------------------------------------------------------------------
|
||
/// \dir
|
||
/// !Purpose
|
||
///
|
||
/// Definition and functions for using AT91CAP9-related features, such
|
||
/// has PIO pins, memories, etc.
|
||
///
|
||
/// !Usage
|
||
/// -# The code for booting the board is provided by board_cstartup.S and
|
||
/// board_lowlevel.c.
|
||
/// -# For using board PIOs, board characteristics (clock, etc.) and external
|
||
/// components, see board.h.
|
||
/// -# For manipulating memories (remapping, SDRAM, etc.), see board_memories.h.
|
||
//------------------------------------------------------------------------------
|
||
|
||
//------------------------------------------------------------------------------
|
||
/// \unit
|
||
/// !Purpose
|
||
///
|
||
/// Definition of AT91CAP9-STK characteristics, AT91CAP9-dependant PIOs and
|
||
/// external components interfacing.
|
||
///
|
||
/// !Usage
|
||
/// -# For operating frequency information, see "AT91CAP9-STK - Operating frequencies".
|
||
/// -# For using portable PIO definitions, see "AT91CAP9-STK - PIO definitions".
|
||
/// -# Several USB definitions are included here (see "AT91CAP9-STK - USB device").
|
||
/// -# For external components definitions, see "AT91CAP9-STK - External components".
|
||
/// -# For memory-related definitions, see "AT91CAP9-STK - Memories".
|
||
//------------------------------------------------------------------------------
|
||
|
||
#ifndef BOARD_H
|
||
#define BOARD_H
|
||
|
||
//------------------------------------------------------------------------------
|
||
// Headers
|
||
//------------------------------------------------------------------------------
|
||
|
||
#if defined(at91cap9)
|
||
#include "at91cap9/chip.h"
|
||
#include "at91cap9/AT91CAP9.h"
|
||
#else
|
||
#error Board does not support the specified chip.
|
||
#endif
|
||
|
||
//------------------------------------------------------------------------------
|
||
// Definitions
|
||
//------------------------------------------------------------------------------
|
||
|
||
//------------------------------------------------------------------------------
|
||
/// \page "AT91CAP9-STK - Board Description"
|
||
/// This page lists several definition related to the board description
|
||
///
|
||
/// !Definitions
|
||
/// - BOARD_NAME
|
||
|
||
/// Name of the board.
|
||
#define BOARD_NAME "AT91CAP9-STK"
|
||
/// Board definition.
|
||
#define at91cap9stk
|
||
//------------------------------------------------------------------------------
|
||
|
||
//------------------------------------------------------------------------------
|
||
/// \page "AT91CAP9-STK - Operating frequencies"
|
||
/// This page lists several definition related to the board operating frequency
|
||
/// (when using the initialization done by board_lowlevel.c).
|
||
///
|
||
/// !Definitions
|
||
/// - BOARD_MAINOSC
|
||
/// - BOARD_MCK
|
||
|
||
/// Frequency of the board main oscillator.
|
||
#define BOARD_MAINOSC 12000000
|
||
|
||
/// Master clock frequency (when using board_lowlevel.c).
|
||
#define BOARD_MCK ((12000000 * 50 / 3) / 2)
|
||
|
||
//------------------------------------------------------------------------------
|
||
|
||
//------------------------------------------------------------------------------
|
||
// ADC
|
||
//------------------------------------------------------------------------------
|
||
/// ADC clock frequency, at 10-bit resolution (in Hz)
|
||
#define ADC_MAX_CK_10BIT 5000000
|
||
/// Startup time max, return from Idle mode (in <20>s)
|
||
#define ADC_STARTUP_TIME_MAX 40
|
||
/// Track and hold Acquisition Time min (in ns)
|
||
#define ADC_TRACK_HOLD_TIME_MIN 500
|
||
|
||
//------------------------------------------------------------------------------
|
||
/// \page "AT91CAP9-STK - USB device"
|
||
///
|
||
/// !Constants
|
||
/// - BOARD_USB_BMATTRIBUTES
|
||
|
||
/// USB attributes configuration descriptor (bus or self powered, remote wakeup)
|
||
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
|
||
|
||
//------------------------------------------------------------------------------
|
||
|
||
//------------------------------------------------------------------------------
|
||
/// \page "AT91CAP9-STK - PIO definitions"
|
||
/// This pages lists all the pio definitions contained in board.h. The constants
|
||
/// are named using the following convention: PIN_* for a constant which defines
|
||
/// a single Pin instance (but may include several PIOs sharing the same
|
||
/// controller), and PINS_* for a list of Pin instances.
|
||
///
|
||
/// !Programmable clocks
|
||
/// - PIN_PCK2
|
||
///
|
||
/// !DBGU
|
||
/// - PINS_DBGU
|
||
///
|
||
/// !LEDs
|
||
/// - PIN_LED_0
|
||
/// - PIN_LED_1
|
||
/// - PINS_LEDS
|
||
/// - LED_POWER
|
||
/// - LED_DS1
|
||
/// - LED_DS2
|
||
///
|
||
/// !Push buttons
|
||
/// - PIN_PUSHBUTTON_1
|
||
/// - PIN_PUSHBUTTON_2
|
||
/// - PINS_PUSHBUTTONS
|
||
/// - PUSHBUTTON_BP1
|
||
/// - PUSHBUTTON_BP2
|
||
/// - JOYSTICK_LEFT
|
||
/// - JOYSTICK_RIGHT
|
||
///
|
||
/// !SPI0
|
||
/// - PIN_SPI0_MISO
|
||
/// - PIN_SPI0_MOSI
|
||
/// - PIN_SPI0_SPCK
|
||
/// - PINS_SPI0
|
||
/// - PIN_SPI0_NPCS0
|
||
/// - PIN_SPI0_NPCS1
|
||
/// - PIN_SPI0_NPCS2
|
||
///
|
||
/// !SPI1
|
||
/// - PIN_SPI1_MISO
|
||
/// - PIN_SPI1_MOSI
|
||
/// - PIN_SPI1_SPCK
|
||
/// - PINS_SPI1
|
||
/// - PIN_SPI1_NPCS0
|
||
///
|
||
/// !SSC
|
||
/// - PINS_SSC_TX
|
||
///
|
||
/// !PWMC
|
||
/// - PIN_PWMC_PWM0
|
||
/// - PIN_PWMC_PWM1
|
||
/// - PIN_PWM_LED0
|
||
/// - PIN_PWM_LED1
|
||
/// - CHANNEL_PWM_LED0
|
||
/// - CHANNEL_PWM_LED1
|
||
///
|
||
/// !ADC
|
||
/// - PIN_ADC_ADC0
|
||
/// - PIN_ADC_ADC1
|
||
/// - PIN_ADC_ADC2
|
||
/// - PIN_ADC_ADC3
|
||
/// - PINS_ADC
|
||
///
|
||
/// !USB
|
||
/// - PIN_USB_VBUS
|
||
///
|
||
/// !MCI
|
||
/// - PINS_MCI
|
||
///
|
||
/// !TWI
|
||
/// - PINS_TWI
|
||
|
||
/// PCK0 pin definition.
|
||
#define PIN_PCK2 {AT91C_PA15_PCK2, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
|
||
|
||
/// List of all DBGU pin definitions.
|
||
#define PINS_DBGU {(1<<30)|(1<<31), AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
|
||
|
||
/// LED #0 pin definition.
|
||
#define PIN_LED_0 {AT91C_PIO_PA10, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_OUTPUT_0, PIO_DEFAULT}
|
||
/// LED #1 pin definition.
|
||
#define PIN_LED_1 {AT91C_PIO_PA14, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_OUTPUT_0, PIO_DEFAULT}
|
||
/// List of all LEDs definitions.
|
||
#define PINS_LEDS PIN_LED_0, PIN_LED_1
|
||
|
||
/// Push button #1 pin definition.
|
||
#define PIN_PUSHBUTTON_1 {1 << 9, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_INPUT, PIO_PULLUP}
|
||
/// Push button #2 pin definition.
|
||
#define PIN_PUSHBUTTON_2 {1 << 8, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_INPUT, PIO_PULLUP}
|
||
/// List of push button pin definitions.
|
||
#define PINS_PUSHBUTTONS PIN_PUSHBUTTON_1, PIN_PUSHBUTTON_2
|
||
/// Push button #1 index.
|
||
#define PUSHBUTTON_BP1 0
|
||
/// Push button #2 index.
|
||
#define PUSHBUTTON_BP2 1
|
||
/// Simulated joystick LEFT index.
|
||
#define JOYSTICK_LEFT 0
|
||
/// Simulated joystick RIGHT index.
|
||
#define JOYSTICK_RIGHT 1
|
||
|
||
/// SPI MISO pin definition.
|
||
#define PIN_SPI0_MISO {AT91C_PA0_SPI0_MISO, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_PULLUP}
|
||
/// SPI MOSI pin definition.
|
||
#define PIN_SPI0_MOSI {AT91C_PA1_SPI0_MOSI, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
|
||
/// SPI SPCK pin definition.
|
||
#define PIN_SPI0_SPCK {AT91C_PA2_SPI0_SPCK, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
|
||
/// List of SPI pin definitions (MISO, MOSI & SPCK).
|
||
#define PINS_SPI0 PIN_SPI0_MISO, PIN_SPI0_MOSI, PIN_SPI0_SPCK
|
||
/// SPI chip select 0 pin definition.
|
||
#define PIN_SPI0_NPCS0 {AT91C_PA5_SPI0_NPCS0, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
|
||
/// SPI chip select 1 pin definition.
|
||
#define PIN_SPI0_NPCS1 {AT91C_PA3_SPI0_NPCS1, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
|
||
/// SPI chip select 2 pin definition.
|
||
#define PIN_SPI0_NPCS2 {AT91C_PA4_SPI0_NPCS2A, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
|
||
/// SPI chip select 3 pin definition.
|
||
#define PIN_SPI0_NPCS3 {AT91C_PD1_SPI0_NPCS3D, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
|
||
|
||
/// SPI MISO pin definition.
|
||
#define PIN_SPI1_MISO {AT91C_PB12_SPI1_MISO, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_PULLUP}
|
||
/// SPI MOSI pin definition.
|
||
#define PIN_SPI1_MOSI {AT91C_PB13_SPI1_MOSI, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
|
||
/// SPI SPCK pin definition.
|
||
#define PIN_SPI1_SPCK {AT91C_PB14_SPI1_SPCK, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
|
||
/// List of SPI pin definitions (MISO, MOSI & SPCK).
|
||
#define PINS_SPI1 PIN_SPI1_MISO, PIN_SPI1_MOSI, PIN_SPI1_SPCK
|
||
/// SPI chip select 0 pin definition.
|
||
#define PIN_SPI1_NPCS0 {AT91C_PB15_SPI1_NPCS0, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
|
||
/// SPI chip select 1 pin definition.
|
||
#define PIN_SPI1_NPCS1 {AT91C_PB16_SPI1_NPCS1, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
|
||
/// SPI chip select 2 pin definition.
|
||
#define PIN_SPI1_NPCS2 {AT91C_PB17_SPI1_NPCS2B, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
|
||
/// SPI chip select 3 pin definition.
|
||
#define PIN_SPI1_NPCS3 {AT91C_PB18_SPI1_NPCS3B, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
|
||
|
||
/// SSC transmitter pins definition.
|
||
#define PINS_SSC_TX { (1 << 0) | (1 << 1) | (1 << 2), \
|
||
AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
|
||
|
||
/// PWMC PWM1 pin definition.
|
||
#define PIN_PWMC_PWM1 {1 << 10, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
|
||
/// PWMC PWM2 pin definition.
|
||
#define PIN_PWMC_PWM3 {1 << 11, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
|
||
/// PWM pin definition for LED0
|
||
#define PIN_PWM_LED0 PIN_PWMC_PWM1
|
||
/// PWM pin definition for LED1
|
||
#define PIN_PWM_LED1 PIN_PWMC_PWM3
|
||
/// PWM channel for LED0
|
||
#define CHANNEL_PWM_LED0 1
|
||
/// PWM channel for LED1
|
||
#define CHANNEL_PWM_LED1 3
|
||
|
||
/// ADC_AD0 pin definition.
|
||
#define PIN_ADC_ADC0 {AT91C_PB13_AD0, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
|
||
/// ADC_AD1 pin definition.
|
||
#define PIN_ADC_ADC1 {AT91C_PB14_AD1, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
|
||
/// ADC_AD2 pin definition.
|
||
#define PIN_ADC_ADC2 {AT91C_PB15_AD2, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
|
||
/// ADC_AD3 pin definition.
|
||
#define PIN_ADC_ADC3 {AT91C_PB16_AD3, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
|
||
/// ADC_AD0 pin definition.
|
||
#define PIN_ADC_ADC4 {AT91C_PB17_AD4, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
|
||
/// ADC_AD1 pin definition.
|
||
#define PIN_ADC_ADC5 {AT91C_PB18_AD5, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
|
||
/// ADC_AD2 pin definition.
|
||
#define PIN_ADC_ADC6 {AT91C_PB19_AD6, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
|
||
/// ADC_AD3 pin definition.
|
||
#define PIN_ADC_ADC7 {AT91C_PB20_AD7, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
|
||
/// Pins ADC
|
||
#define PINS_ADC PIN_ADC_ADC0, PIN_ADC_ADC1, PIN_ADC_ADC2, PIN_ADC_ADC3
|
||
|
||
/// USB monitoring pin definition.
|
||
#define PIN_USB_VBUS {1 << 8, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
|
||
|
||
/// List of MCI pins definitions.
|
||
#define PINS_MCI {0x003F0000, AT91C_BASE_PIOA, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
|
||
|
||
/// TWI0 pins definition.
|
||
#define PINS_TWI {(1<<4) | (1<<5), AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
|
||
|
||
//------------------------------------------------------------------------------
|
||
|
||
//------------------------------------------------------------------------------
|
||
/// \page "AT91CAP9-STK - External components"
|
||
/// This page lists the definitions related to external on-board components
|
||
/// located in the board.h file for the AT91CAP9-STK.
|
||
///
|
||
/// !AT45 Dataflash
|
||
/// - BOARD_AT45_A_SPI_BASE
|
||
/// - BOARD_AT45_A_SPI_ID
|
||
/// - BOARD_AT45_A_SPI_PINS
|
||
/// - BOARD_AT45_A_SPI
|
||
/// - BOARD_AT45_A_NPCS
|
||
/// - BOARD_AT45_A_NPCS_PIN
|
||
///
|
||
/// !AT26 Serial Flash
|
||
/// - BOARD_AT26_A_SPI_BASE
|
||
/// - BOARD_AT26_A_SPI_ID
|
||
/// - BOARD_AT26_A_SPI_PINS
|
||
/// - BOARD_AT26_A_SPI
|
||
/// - BOARD_AT26_A_NPCS
|
||
/// - BOARD_AT26_A_NPCS_PIN
|
||
///
|
||
/// !LCD
|
||
/// - PINS_LCD
|
||
/// - BOARD_LCD_WIDTH
|
||
/// - BOARD_LCD_HEIGHT
|
||
/// - BOARD_LCD_BPP
|
||
/// - BOARD_LCD_IFWIDTH
|
||
/// - BOARD_LCD_FRAMESIZE_PIXELS
|
||
/// - BOARD_LCD_FRAMESIZE
|
||
/// - BOARD_LCD_FRAMERATE
|
||
/// - BOARD_LCD_PIXELCLOCK
|
||
/// - BOARD_LCD_DISPLAYTYPE
|
||
/// - BOARD_LCD_POLARITY_INVVD
|
||
/// - BOARD_LCD_POLARITY_INVFRAME
|
||
/// - BOARD_LCD_POLARITY_INVLINE
|
||
/// - BOARD_LCD_POLARITY_INVCLK
|
||
/// - BOARD_LCD_POLARITY_INVDVAL
|
||
/// - BOARD_LCD_CLOCKMODE
|
||
/// - BOARD_LCD_TIMING_VFP
|
||
/// - BOARD_LCD_TIMING_VBP
|
||
/// - BOARD_LCD_TIMING_VPW
|
||
/// - BOARD_LCD_TIMING_VHDLY
|
||
/// - BOARD_LCD_TIMING_HFP
|
||
/// - BOARD_LCD_TIMING_HBP
|
||
/// - BOARD_LCD_TIMING_HPW
|
||
///
|
||
/// !TouchScreen
|
||
/// - BOARD_TSC_ADS7843
|
||
/// - PIN_TCS_IRQ
|
||
/// - PIN_TCS_BUSY
|
||
/// - BOARD_TSC_SPI_BASE
|
||
/// - BOARD_TSC_SPI_ID
|
||
/// - BOARD_TSC_SPI_PINS
|
||
/// - BOARD_TSC_NPCS
|
||
/// - BOARD_TSC_NPCS_PIN
|
||
///
|
||
/// !SD Card
|
||
/// - BOARD_SD_MCI_BASE
|
||
/// - BOARD_SD_MCI_ID
|
||
/// - BOARD_SD_PINS
|
||
/// - BOARD_SD_PIN_CD
|
||
/// - BOARD_SD_SLOT
|
||
///
|
||
/// !EMAC
|
||
/// - BOARD_EMAC_PHY_ADDR
|
||
/// - BOARD_EMAC_PHY_COMP_LAN8700
|
||
/// - BOARD_EMAC_PIN_PWRDN
|
||
/// - BOARD_EMAC_MODE_RMII
|
||
/// - BOARD_EMAC_PINS
|
||
/// - BOARD_EMAC_PIN_RXDV
|
||
/// - BOARD_EMAC_PIN_COL
|
||
/// - BOARD_EMAC_RST_PINS
|
||
/// - BOARD_EMAC_RUN_PINS
|
||
///
|
||
/// !AT73C213
|
||
/// - BOARD_AT73C213_SPI
|
||
/// - BOARD_AT73C213_SPI_ID
|
||
/// - BOARD_AT73C213_NPCS
|
||
/// - BOARD_AT73C213_SSC
|
||
/// - BOARD_AT73C213_SSC_ID
|
||
/// - BOARD_AT73C213_MCK
|
||
///
|
||
/// !AT98SC
|
||
/// - BOARD_AT98SC_SPI_BASE
|
||
/// - BOARD_AT98SC_SPI_ID
|
||
/// - BOARD_AT98SC_SPI_PINS
|
||
/// - BOARD_AT98SC_NPCS
|
||
/// - BOARD_AT98SC_NPCS_PIN
|
||
|
||
/// Base address of SPI peripheral connected to the dataflash.
|
||
#define BOARD_AT45_A_SPI_BASE AT91C_BASE_SPI0
|
||
/// Identifier of SPI peripheral connected to the dataflash.
|
||
#define BOARD_AT45_A_SPI_ID AT91C_ID_SPI0
|
||
/// Pins of the SPI peripheral connected to the dataflash.
|
||
#define BOARD_AT45_A_SPI_PINS PINS_SPI0
|
||
/// Dataflahs SPI number.
|
||
#define BOARD_AT45_A_SPI 0
|
||
/// Chip select connected to the dataflash.
|
||
#define BOARD_AT45_A_NPCS 0
|
||
/// Chip select pin connected to the dataflash.
|
||
#define BOARD_AT45_A_NPCS_PIN PIN_SPI0_NPCS0
|
||
|
||
/// Base address of SPI peripheral connected to the serialflash.
|
||
#define BOARD_AT26_A_SPI_BASE AT91C_BASE_SPI
|
||
/// Identifier of SPI peripheral connected to the serialflash.
|
||
#define BOARD_AT26_A_SPI_ID AT91C_ID_SPI
|
||
/// Pins of the SPI peripheral connected to the serialflash.
|
||
#define BOARD_AT26_A_SPI_PINS PINS_SPI0
|
||
/// Serialflash SPI number.
|
||
#define BOARD_AT26_A_SPI 0
|
||
/// Chip select connected to the serialflash.
|
||
#define BOARD_AT26_A_NPCS 0
|
||
/// Chip select pin connected to the serialflash.
|
||
#define BOARD_AT26_A_NPCS_PIN PIN_SPI_NPCS0
|
||
|
||
/// LCD pin list.
|
||
#define PINS_LCD \
|
||
{0x00000200, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}, \
|
||
{0x0FCFCFCE, AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
|
||
|
||
/// Display width in pixels.
|
||
#define BOARD_LCD_WIDTH 240
|
||
/// Display height in pixels.
|
||
#define BOARD_LCD_HEIGHT 320
|
||
/// Display resolution in bits per pixel (bpp).
|
||
#define BOARD_LCD_BPP AT91C_LCDC_PIXELSIZE_TWENTYFOURBITSPERPIXEL
|
||
/// Display interface width in bits.
|
||
#define BOARD_LCD_IFWIDTH 24
|
||
/// Frame size in pixels (height * width * bpp).
|
||
#define BOARD_LCD_FRAMESIZE_PIXELS (BOARD_LCD_WIDTH * BOARD_LCD_HEIGHT * 24)
|
||
/// Frame size in words (height * width * bpp / 32)
|
||
#define BOARD_LCD_FRAMESIZE (BOARD_LCD_FRAMESIZE_PIXELS / 32)
|
||
/// Frame rate in Hz.
|
||
#define BOARD_LCD_FRAMERATE 60
|
||
/// Pixel clock rate in Hz (frameSize * frameRate / interfaceWidth).
|
||
#define BOARD_LCD_PIXELCLOCK (BOARD_LCD_FRAMESIZE_PIXELS * BOARD_LCD_FRAMERATE / BOARD_LCD_IFWIDTH)
|
||
/// LCD display type.
|
||
#define BOARD_LCD_DISPLAYTYPE AT91C_LCDC_DISTYPE_TFT
|
||
/// LCDC polarity.
|
||
#define BOARD_LCD_POLARITY_INVVD AT91C_LCDC_INVVD_NORMALPOL
|
||
/// LCDVSYNC polarity.
|
||
#define BOARD_LCD_POLARITY_INVFRAME AT91C_LCDC_INVFRAME_NORMALPOL
|
||
/// LCDHSYNC polarity.
|
||
#define BOARD_LCD_POLARITY_INVLINE AT91C_LCDC_INVLINE_NORMALPOL
|
||
/// LCDDOTCLK polarity.
|
||
#define BOARD_LCD_POLARITY_INVCLK AT91C_LCDC_INVCLK_NORMALPOL
|
||
/// LCDDEN polarity.
|
||
#define BOARD_LCD_POLARITY_INVDVAL AT91C_LCDC_INVDVAL_NORMALPOL
|
||
/// Pixel clock mode.
|
||
#define BOARD_LCD_CLOCKMODE AT91C_LCDC_CLKMOD_ALWAYSACTIVE
|
||
/// Vertical front porch in number of lines.
|
||
#define BOARD_LCD_TIMING_VFP 2
|
||
/// Vertical back porch in number of lines.
|
||
#define BOARD_LCD_TIMING_VBP 4
|
||
/// Vertical pulse width in LCDDOTCLK cycles.
|
||
#define BOARD_LCD_TIMING_VPW 1
|
||
/// Number of cycles between VSYNC edge and HSYNC rising edge.
|
||
#define BOARD_LCD_TIMING_VHDLY 1
|
||
/// Horizontal front porch in LCDDOTCLK cycles.
|
||
#define BOARD_LCD_TIMING_HFP 11
|
||
/// Horizontal back porch in LCDDOTCLK cycles.
|
||
#define BOARD_LCD_TIMING_HBP 17
|
||
/// Horizontal pulse width in LCDDOTCLK cycles.
|
||
#define BOARD_LCD_TIMING_HPW 5
|
||
|
||
/// Indicates board has an ADS7843 external component to manage Touch Screen
|
||
#define BOARD_TSC_ADS7843
|
||
|
||
/// Touchscreen controller IRQ pin definition.
|
||
#define PIN_TCS_IRQ {AT91C_PIO_PC4, AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_INPUT, PIO_PULLUP}
|
||
/// Touchscreen controller Busy pin definition.
|
||
#define PIN_TCS_BUSY {AT91C_PIO_PC5, AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_INPUT, PIO_DEFAULT}
|
||
|
||
/// Base address of SPI peripheral connected to the touchscreen controller.
|
||
#define BOARD_TSC_SPI_BASE AT91C_BASE_SPI0
|
||
/// Identifier of SPI peripheral connected to the touchscreen controller.
|
||
#define BOARD_TSC_SPI_ID AT91C_ID_SPI0
|
||
/// Pins of the SPI peripheral connected to the touchscreen controller.
|
||
#define BOARD_TSC_SPI_PINS PINS_SPI0
|
||
/// Chip select connected to the touchscreen controller.
|
||
#define BOARD_TSC_NPCS 1
|
||
/// Chip select pin connected to the touchscreen controller.
|
||
#define BOARD_TSC_NPCS_PIN PIN_SPI0_NPCS1
|
||
|
||
/// Base address of the MCI peripheral connected to the SD card.
|
||
#define BOARD_SD_MCI_BASE AT91C_BASE_MCI1
|
||
/// Peripheral identifier of the MCI connected to the SD card.
|
||
#define BOARD_SD_MCI_ID AT91C_ID_MCI1
|
||
/// MCI pins that shall be configured to access the SD card.
|
||
#define BOARD_SD_PINS PINS_MCI
|
||
/// MCI slot to which the SD card is connected to.
|
||
#define BOARD_SD_SLOT MCI_SD_SLOTA
|
||
/// SD card detection pin definition.
|
||
#define BOARD_SD_PIN_CD {AT91C_PIO_PC21, AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_INPUT, PIO_PULLUP}
|
||
|
||
/// Base address of the MCI peripheral connected to the SD card.
|
||
#define BOARD_SD_MCI1_BASE BOARD_SD_MCI_BASE
|
||
/// Peripheral identifier of the MCI connected to the SD card.
|
||
#define BOARD_SD_MCI1_ID BOARD_SD_MCI_ID
|
||
/// MCI pins that shall be configured to access the SD card.
|
||
#define BOARD_SD_MCI1_PINS PINS_MCI
|
||
/// Second MCI slot to which the SD card is connected to.
|
||
#define BOARD_SD_MCI1_SLOT MCI_SD_SLOTA
|
||
/// SD card detection pin definition.
|
||
#define BOARD_SD_MCI1_PIN_CD BOARD_SD_PIN_CD
|
||
|
||
/// PHY address
|
||
#define BOARD_EMAC_PHY_ADDR 31
|
||
/// PHY component
|
||
#define BOARD_EMAC_PHY_COMP_LAN8700 1
|
||
/// Board EMAC work mode - RMII/MII ( 1 / 0 )
|
||
#define BOARD_EMAC_MODE_RMII 1
|
||
/// Board EMAC Power Up control pin
|
||
#define BOARD_EMAC_PIN_PWRDN { (1<<31), AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_OUTPUT_1, PIO_DEFAULT}
|
||
/// The PIN list of PIO for EMAC
|
||
#define BOARD_EMAC_PINS {0x7FE00000, AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}, \
|
||
{0x0FF00000, AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_PERIPH_B, PIO_DEFAULT}
|
||
#define BOARD_EMAC_PIN_RXDV {(1<<22), AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
|
||
#define BOARD_EMAC_PIN_COL {(1<<26), AT91C_BASE_PIOC, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
|
||
#define BOARD_EMAC_RESET {(1<<9), AT91C_BASE_PIOB, AT91C_ID_PIOABCD, PIO_OUTPUT_1, PIO_DEFAULT}
|
||
/// The PIN Configure list for EMAC on power up reset (MII)
|
||
#define BOARD_EMAC_RST_PINS BOARD_EMAC_PIN_RXDV, BOARD_EMAC_PIN_COL
|
||
/// The runtime pin configure list for EMAC
|
||
#define BOARD_EMAC_RUN_PINS BOARD_EMAC_PINS
|
||
|
||
/// Base address of SPI peripheral to which the DAC is connected.
|
||
#define BOARD_AT73C213_SPI AT91C_BASE_SPI0
|
||
/// Peripheral ID of the SPI connected to the DAC.
|
||
#define BOARD_AT73C213_SPI_ID AT91C_ID_SPI0
|
||
/// Chip select value for accessing the DAC with the SPI.
|
||
#define BOARD_AT73C213_SPI_NPCS 2
|
||
/// Pins to configure for the SPI interface.
|
||
#define BOARD_AT73C213_SPI_PINS PINS_SPI0, PIN_SPI0_NPCS2
|
||
/// SSC peripheral to which the DAC is connected.
|
||
#define BOARD_AT73C213_SSC AT91C_BASE_SSC0
|
||
/// Peripheral ID of the SSC connected to the DAC.
|
||
#define BOARD_AT73C213_SSC_ID AT91C_ID_SSC0
|
||
/// Pins to configure for the SSC interface.
|
||
#define BOARD_AT73C213_SSC_PINS PINS_SSC_TX
|
||
/// PCK pin connected to the DAC MCK pin
|
||
#define BOARD_AT73C213_MCK PIN_PCK2
|
||
|
||
/// Base address of SPI peripheral connected to the AT98 secure chip
|
||
#define BOARD_AT98SC_SPI_BASE AT91C_BASE_SPI1
|
||
/// Identifier of SPI peripheral connected to the AT98 secure chip
|
||
#define BOARD_AT98SC_SPI_ID AT91C_ID_SPI1
|
||
/// Pins of the SPI peripheral connected to the AT98 secure chip
|
||
#define BOARD_AT98SC_SPI_PINS PINS_SPI1
|
||
/// Chip select connected to the AT98 secure chip
|
||
#define BOARD_AT98SC_NPCS 0
|
||
/// Chip select pin connected to the AT98 secure chip
|
||
#define BOARD_AT98SC_NPCS_PIN PIN_SPI1_NPCS0
|
||
|
||
//------------------------------------------------------------------------------
|
||
|
||
//------------------------------------------------------------------------------
|
||
/// \page "AT91CAP9-STK - Memories"
|
||
/// This page lists definitions related to external on-board memories.
|
||
///
|
||
/// !SDRAM
|
||
/// - BOARD_SDRAM_SIZE
|
||
/// - PIN_SDRAM
|
||
/// - BOARD_SDRAM_BUSWIDTH
|
||
///
|
||
/// !Nandflash
|
||
/// - PINS_NANDFLASH
|
||
/// - BOARD_NF_CE_PIN
|
||
/// - BOARD_NF_RB_PIN
|
||
/// - BOARD_NF_COMMAND_ADDR
|
||
/// - BOARD_NF_ADDRESS_ADDR
|
||
/// - BOARD_NF_DATA_ADDR
|
||
|
||
/// Board SDRAM size
|
||
#define BOARD_SDRAM_SIZE (64*1024*1024) // 64 MB
|
||
/// List of all SDRAM pins definitions.
|
||
#define PINS_SDRAM {0xFFFF0000, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_PERIPH_A, PIO_DEFAULT}
|
||
/// SDRAM bus width.
|
||
#define BOARD_SDRAM_BUSWIDTH 32
|
||
|
||
/// Nandflash controller peripheral pins definition.
|
||
#define PINS_NANDFLASH BOARD_NF_CE_PIN
|
||
/// Nandflash output enable pin definition.
|
||
//#define PIN_NF_OE // => dedicated pin
|
||
/// Nandflash write enable pin definition
|
||
//#define PIN_NF_WE // => dedicated pin
|
||
/// Nandflash chip enable pin definition.
|
||
#define BOARD_NF_CE_PIN {1 << 15, AT91C_BASE_PIOD, AT91C_ID_PIOABCD, PIO_OUTPUT_1, PIO_DEFAULT}
|
||
/// Nandflash ready/busy pin definition.
|
||
#define BOARD_NF_RB_PIN { 0, 0, 0, 0, 0}// Not used on the DK board. Use Read Status Register Command
|
||
/// Address for transferring command bytes to the nandflash.
|
||
#define BOARD_NF_COMMAND_ADDR 0x40400000
|
||
/// Address for transferring address bytes to the nandflash.
|
||
#define BOARD_NF_ADDRESS_ADDR 0x40200000
|
||
/// Address for transferring data bytes to the nandflash.
|
||
#define BOARD_NF_DATA_ADDR 0x40000000
|
||
|
||
//------------------------------------------------------------------------------
|
||
|
||
//------------------------------------------------------------------------------
|
||
// Library naming workaround
|
||
//------------------------------------------------------------------------------
|
||
|
||
//------------------------------------------------------------------------------
|
||
/// \page "AT91CAP9-STK- Individual chip definition"
|
||
/// This page lists the definitions related to different chip's definition
|
||
/// located in the board.h file for the AT91CAP9-STK.
|
||
|
||
/// Twi eeprom
|
||
#define BOARD_ID_TWI_EEPROM AT91C_ID_TWI
|
||
#define BOARD_BASE_TWI_EEPROM AT91C_BASE_TWI
|
||
#define BOARD_PINS_TWI_EEPROM PINS_TWI
|
||
//------------------------------------------------------------------------------
|
||
|
||
|
||
#endif //#ifndef BOARD_H
|
||
|