strongswan/conf/plugins/load-tester.opt

133 lines
4.4 KiB
Plaintext

charon.plugins.load-tester {}
Section to configure the load-tester plugin, see LOAD TESTS in
**strongswan.conf**(5) for details.
charon.plugins.load-tester.addrs {}
Section that contains key/value pairs with address pools (in CIDR notation)
to use for a specific network interface e.g. eth0 = 10.10.0.0/16.
charon.plugins.load-tester.addrs_keep = no
Whether to keep dynamic addresses even after the associated SA got
terminated.
charon.plugins.load-tester.addrs_prefix = 16
Network prefix length to use when installing dynamic addresses.
If set to -1 the full address is used (i.e. 32 or 128).
charon.plugins.load-tester.ca_dir =
Directory to load (intermediate) CA certificates from.
charon.plugins.load-tester.child_rekey = 600
Seconds to start CHILD_SA rekeying after setup.
charon.plugins.load-tester.crl
URI to a CRL to include as certificate distribution point in generated
certificates.
charon.plugins.load-tester.delay = 0
Delay between initiations for each thread.
charon.plugins.load-tester.delete_after_established = no
Delete an IKE_SA as soon as it has been established.
charon.plugins.load-tester.digest = sha1
Digest algorithm used when issuing certificates.
charon.plugins.load-tester.dpd_delay = 0
DPD delay to use in load test.
charon.plugins.load-tester.dynamic_port = 0
Base port to be used for requests (each client uses a different port).
charon.plugins.load-tester.eap_password = default-pwd
EAP secret to use in load test.
charon.plugins.load-tester.enable = no
Enable the load testing plugin. **WARNING**: Never enable this plugin on
productive systems. It provides preconfigured credentials and allows an
attacker to authenticate as any user.
charon.plugins.load-tester.esp = aes128-sha1
CHILD_SA proposal to use for load tests.
charon.plugins.load-tester.fake_kernel = no
Fake the kernel interface to allow load-testing against self.
charon.plugins.load-tester.ike_rekey = 0
Seconds to start IKE_SA rekeying after setup.
charon.plugins.load-tester.init_limit = 0
Global limit of concurrently established SAs during load test.
charon.plugins.load-tester.initiator = 0.0.0.0
Address to initiate from.
charon.plugins.load-tester.initiators = 0
Number of concurrent initiator threads to use in load test.
charon.plugins.load-tester.initiator_auth = pubkey
Authentication method(s) the initiator uses.
charon.plugins.load-tester.initiator_id =
Initiator ID used in load test.
charon.plugins.load-tester.initiator_match =
Initiator ID to match against as responder.
charon.plugins.load-tester.initiator_tsi =
Traffic selector on initiator side, as proposed by initiator.
charon.plugins.load-tester.initiator_tsr =
Traffic selector on responder side, as proposed by initiator.
charon.plugins.load-tester.iterations = 1
Number of IKE_SAs to initiate by each initiator in load test.
charon.plugins.load-tester.issuer_cert =
Path to the issuer certificate (if not configured a hard-coded default value
is used).
charon.plugins.load-tester.issuer_key =
Path to private key that is used to issue certificates (if not configured a
hard-coded default value is used).
charon.plugins.load-tester.mode = tunnel
IPsec mode to use, one of _tunnel_, _transport_, or _beet_.
charon.plugins.load-tester.pool =
Provide INTERNAL_IPV4_ADDRs from a named pool.
charon.plugins.load-tester.preshared_key = <default-psk>
Preshared key to use in load test.
charon.plugins.load-tester.proposal = aes128-sha1-modp768
IKE proposal to use in load test.
charon.plugins.load-tester.responder = 127.0.0.1
Address to initiation connections to.
charon.plugins.load-tester.responder_auth = pubkey
Authentication method(s) the responder uses.
charon.plugins.load-tester.responder_id =
Responder ID used in load test.
charon.plugins.load-tester.responder_tsi = initiator_tsi
Traffic selector on initiator side, as narrowed by responder.
charon.plugins.load-tester.responder_tsr = initiator_tsr
Traffic selector on responder side, as narrowed by responder.
charon.plugins.load-tester.request_virtual_ip = no
Request an INTERNAL_IPV4_ADDR from the server.
charon.plugins.load-tester.shutdown_when_complete = no
Shutdown the daemon after all IKE_SAs have been established.
charon.plugins.load-tester.socket = unix://${piddir}/charon.ldt
Socket provided by the load-tester plugin.
charon.plugins.load-tester.version = 0
IKE version to use (0 means use IKEv2 as initiator and accept any version as
responder).