strongswan/src/libcharon/sa/child_sa.h

411 lines
10 KiB
C

/*
* Copyright (C) 2006-2008 Tobias Brunner
* Copyright (C) 2006-2008 Martin Willi
* Copyright (C) 2006 Daniel Roethlisberger
* Hochschule fuer Technik Rapperswil
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
/**
* @defgroup child_sa child_sa
* @{ @ingroup sa
*/
#ifndef CHILD_SA_H_
#define CHILD_SA_H_
typedef enum child_sa_state_t child_sa_state_t;
typedef struct child_sa_t child_sa_t;
#include <library.h>
#include <crypto/prf_plus.h>
#include <encoding/payloads/proposal_substructure.h>
#include <config/proposal.h>
#include <config/child_cfg.h>
/**
* States of a CHILD_SA
*/
enum child_sa_state_t {
/**
* Just created, uninstalled CHILD_SA
*/
CHILD_CREATED,
/**
* Installed SPD, but no SAD entries
*/
CHILD_ROUTED,
/**
* Installing an in-use CHILD_SA
*/
CHILD_INSTALLING,
/**
* Installed an in-use CHILD_SA
*/
CHILD_INSTALLED,
/**
* While updating hosts, in update_hosts()
*/
CHILD_UPDATING,
/**
* CHILD_SA which is rekeying
*/
CHILD_REKEYING,
/**
* CHILD_SA that was rekeyed, but stays installed
*/
CHILD_REKEYED,
/**
* CHILD_SA negotiation failed, but gets retried
*/
CHILD_RETRYING,
/**
* CHILD_SA in progress of delete
*/
CHILD_DELETING,
/**
* CHILD_SA object gets destroyed
*/
CHILD_DESTROYING,
};
/**
* enum strings for child_sa_state_t.
*/
extern enum_name_t *child_sa_state_names;
/**
* Represents an IPsec SAs between two hosts.
*
* A child_sa_t contains two SAs. SAs for both
* directions are managed in one child_sa_t object. Both
* SAs and the policies have the same reqid.
*
* The procedure for child sa setup is as follows:
* - A gets SPIs for a all protocols in its proposals via child_sa_t.alloc
* - A send the proposals with the allocated SPIs to B
* - B selects a suitable proposal
* - B allocates an SPI for the selected protocol
* - B calls child_sa_t.install for both, the allocated and received SPI
* - B sends the proposal with the allocated SPI to A
* - A calls child_sa_t.install for both, the allocated and recevied SPI
*
* Once SAs are set up, policies can be added using add_policies.
*/
struct child_sa_t {
/**
* Get the name of the config this CHILD_SA uses.
*
* @return name
*/
char* (*get_name) (child_sa_t *this);
/**
* Get the reqid of the CHILD SA.
*
* Every CHILD_SA has a reqid. The kernel uses this ID to
* identify it.
*
* @return reqid of the CHILD SA
*/
u_int32_t (*get_reqid)(child_sa_t *this);
/**
* Get the unique numerical identifier for this CHILD_SA.
*
* While the same reqid might be shared between multiple SAs, the unique_id
* is truly unique for all CHILD_SA instances.
*
* @return unique CHILD_SA identifier
*/
u_int32_t (*get_unique_id)(child_sa_t *this);
/**
* Get the config used to set up this child sa.
*
* @return child_cfg
*/
child_cfg_t* (*get_config) (child_sa_t *this);
/**
* Get the state of the CHILD_SA.
*
* @return CHILD_SA state
*/
child_sa_state_t (*get_state) (child_sa_t *this);
/**
* Set the state of the CHILD_SA.
*
* @param state state to set on CHILD_SA
*/
void (*set_state) (child_sa_t *this, child_sa_state_t state);
/**
* Get the SPI of this CHILD_SA.
*
* Set the boolean parameter inbound to TRUE to
* get the SPI for which we receive packets, use
* FALSE to get those we use for sending packets.
*
* @param inbound TRUE to get inbound SPI, FALSE for outbound.
* @return SPI of the CHILD SA
*/
u_int32_t (*get_spi) (child_sa_t *this, bool inbound);
/**
* Get the CPI of this CHILD_SA.
*
* Set the boolean parameter inbound to TRUE to
* get the CPI for which we receive packets, use
* FALSE to get those we use for sending packets.
*
* @param inbound TRUE to get inbound CPI, FALSE for outbound.
* @return CPI of the CHILD SA
*/
u_int16_t (*get_cpi) (child_sa_t *this, bool inbound);
/**
* Get the protocol which this CHILD_SA uses to protect traffic.
*
* @return AH | ESP
*/
protocol_id_t (*get_protocol) (child_sa_t *this);
/**
* Set the negotiated protocol to use for this CHILD_SA.
*
* @param protocol AH | ESP
*/
void (*set_protocol)(child_sa_t *this, protocol_id_t protocol);
/**
* Get the IPsec mode of this CHILD_SA.
*
* @return TUNNEL | TRANSPORT | BEET
*/
ipsec_mode_t (*get_mode)(child_sa_t *this);
/**
* Set the negotiated IPsec mode to use.
*
* @param mode TUNNEL | TRANPORT | BEET
*/
void (*set_mode)(child_sa_t *this, ipsec_mode_t mode);
/**
* Get the used IPComp algorithm.
*
* @return IPComp compression algorithm.
*/
ipcomp_transform_t (*get_ipcomp)(child_sa_t *this);
/**
* Set the IPComp algorithm to use.
*
* @param ipcomp the IPComp transform to use
*/
void (*set_ipcomp)(child_sa_t *this, ipcomp_transform_t ipcomp);
/**
* Get the action to enforce if the remote peer closes the CHILD_SA.
*
* @return close action
*/
action_t (*get_close_action)(child_sa_t *this);
/**
* Override the close action specified by the CHILD_SA config.
*
* @param close action to enforce
*/
void (*set_close_action)(child_sa_t *this, action_t action);
/**
* Get the action to enforce if the peer is considered dead.
*
* @return dpd action
*/
action_t (*get_dpd_action)(child_sa_t *this);
/**
* Override the DPD action specified by the CHILD_SA config.
*
* @param dpd action to enforce
*/
void (*set_dpd_action)(child_sa_t *this, action_t action);
/**
* Get the selected proposal.
*
* @return selected proposal
*/
proposal_t* (*get_proposal)(child_sa_t *this);
/**
* Set the negotiated proposal.
*
* @param proposal selected proposal
*/
void (*set_proposal)(child_sa_t *this, proposal_t *proposal);
/**
* Check if this CHILD_SA uses UDP encapsulation.
*
* @return TRUE if SA encapsulates ESP packets
*/
bool (*has_encap)(child_sa_t *this);
/**
* Get the absolute time when the CHILD_SA expires or gets rekeyed.
*
* @param hard TRUE for hard lifetime, FALSE for soft (rekey) lifetime
* @return absolute time
*/
time_t (*get_lifetime)(child_sa_t *this, bool hard);
/**
* Get the absolute time when this SA has been installed.
*
* @return monotonic absolute install time
*/
time_t (*get_installtime)(child_sa_t *this);
/**
* Get last use time and the number of bytes processed.
*
* @param inbound TRUE for inbound traffic, FALSE for outbound
* @param[out] time time of last use in seconds (NULL to ignore)
* @param[out] bytes number of processed bytes (NULL to ignore)
* @param[out] packets number of processed packets (NULL to ignore)
*/
void (*get_usestats)(child_sa_t *this, bool inbound, time_t *time,
u_int64_t *bytes, u_int64_t *packets);
/**
* Get the mark used with this CHILD_SA.
*
* @param inbound TRUE to get inbound mark, FALSE for outbound
* @return mark used with this CHILD_SA
*/
mark_t (*get_mark)(child_sa_t *this, bool inbound);
/**
* Create an enumerator over traffic selectors of one side.
*
* @param local TRUE for own traffic selectors, FALSE for remote.
* @return enumerator over traffic_selector_t*
*/
enumerator_t* (*create_ts_enumerator)(child_sa_t *this, bool local);
/**
* Create an enumerator over installed policies.
*
* The enumerated traffic selectors is a full mesh of compatible local
* and remote traffic selectors.
*
* @return enumerator over a pair of traffic_selector_t*
*/
enumerator_t* (*create_policy_enumerator)(child_sa_t *this);
/**
* Allocate an SPI to include in a proposal.
*
* @param protocol protocol to allocate SPI for (ESP|AH)
* @param spi SPI output pointer
* @return SPI, 0 on failure
*/
u_int32_t (*alloc_spi)(child_sa_t *this, protocol_id_t protocol);
/**
* Allocate a CPI to use for IPComp.
*
* @return CPI, 0 on failure
*/
u_int16_t (*alloc_cpi)(child_sa_t *this);
/**
* Install an IPsec SA for one direction.
*
* @param encr encryption key, if any
* @param integ integrity key
* @param spi SPI to use, allocated for inbound
* @param cpi CPI to use, allocated for outbound
* @param initiator TRUE if initiator of exchange resulting in this SA
* @param inbound TRUE to install an inbound SA, FALSE for outbound
* @param tfcv3 TRUE if peer supports ESPv3 TFC
* @param my_ts negotiated local traffic selector list
* @param other_ts negotiated remote traffic selector list
* @return SUCCESS or FAILED
*/
status_t (*install)(child_sa_t *this, chunk_t encr, chunk_t integ,
u_int32_t spi, u_int16_t cpi,
bool initiator, bool inbound, bool tfcv3,
linked_list_t *my_ts, linked_list_t *other_ts);
/**
* Install the policies using some traffic selectors.
*
* Supplied lists of traffic_selector_t's specify the policies
* to use for this child sa.
*
* @param my_ts traffic selectors for local site
* @param other_ts traffic selectors for remote site
* @return SUCCESS or FAILED
*/
status_t (*add_policies)(child_sa_t *this, linked_list_t *my_ts_list,
linked_list_t *other_ts_list);
/**
* Update hosts and ecapulation mode in the kernel SAs and policies.
*
* @param me the new local host
* @param other the new remote host
* @param vips list of local virtual IPs
* @param encap TRUE to use UDP encapsulation for NAT traversal
* @return SUCCESS or FAILED
*/
status_t (*update)(child_sa_t *this, host_t *me, host_t *other,
linked_list_t *vips, bool encap);
/**
* Destroys a child_sa.
*/
void (*destroy) (child_sa_t *this);
};
/**
* Constructor to create a child SA negotiated with IKE.
*
* @param me own address
* @param other remote address
* @param config config to use for this CHILD_SA
* @param reqid reqid of old CHILD_SA when rekeying, 0 otherwise
* @param encap TRUE to enable UDP encapsulation (NAT traversal)
* @param mark_in explicit inbound mark value to use, 0 for config
* @param mark_out explicit outbound mark value to use, 0 for config
* @return child_sa_t object
*/
child_sa_t * child_sa_create(host_t *me, host_t *other, child_cfg_t *config,
u_int32_t reqid, bool encap,
u_int mark_in, u_int mark_out);
#endif /** CHILD_SA_H_ @}*/