This replaces the drop-down box to select certificate identities with a
text field (in the advanced settings) with auto-completion for SANs
contained in the certificate.
The field is always shown and allows using an IKE identity different from
the username for EAP authentication (e.g. to configure a more complete
identity to select a specific config on the server).
Fixes#3134.
This patch adds passing the ESN flag to the kernel if ESN was negotiated
and the appropriate flag is present in the kernel headers, which will
be the case in future FreeBSD releases.
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Closesstrongswan/strongswan#155.
The unique names were introduced for the list-sas command in commit
04c0219e55. However, the child-updown
event wasn't updated to match. Even though the documentation suggests
that the section name of the CHILD_SAs are the same in both messages.
The original name is already being returned in the "name" attribute,
so it'll still be available.
Example:
>>> import vici, json
>>> s = vici.Session()
# First, for comparison, the list-sas command:
>>> print(json.dumps(list(s.list_sas()), sort_keys=True, indent=4, separators=(',', ': ')))
[
{
"vti0": {
"child-sas": {
"vti0-1": {
...
# A child-updown event before the change:
>>> for x in s.listen(["child-updown"]): print(json.dumps(x, sort_keys=True, indent=4, separators=(',', ': ')))
[
"child-updown",
{
"vti0": {
"child-sas": {
"vti0": { # <-- wrong: inconsistent with list-sas
...
# A child-updown event after the change:
>>> s = vici.Session()
>>> for x in s.listen(["child-updown"]): print(json.dumps(x, sort_keys=True, indent=4, separators=(',', ': ')))
[
"child-updown",
{
"vti0": {
"child-sas": {
"vti0-1": { # <-- fixed
Closesstrongswan/strongswan#153.
Resolves conflicts with building against wolfSSL when
`--enable-opensslextra` is set, namely the `WOLFSSL_HMAC_H_`,
`RNG` and `ASN1_*` name conflicts.
Closesstrongswan/strongswan#151.
According to the documentation, it's generally not necessary to manually
seed OpenSSL's DRBG (and it actually can cause the daemon to lock up
during start up on systems with low entropy if OpenSSL is already trying
to seed it itself and holds the lock). While that might already have been
the case with earlier versions, it's not explicitly stated in their
documentation. So we keep the code for these versions.
Since D-Bus 1.9.18 configuration files installed by third-party should
go in share/dbus-1/system.d. The old location is for sysadmin overrides.
Closesstrongswan/strongswan#150.
As specified by RFC 7296, section 2.6, the data associated with COOKIE
notifications MUST be between 1 and 64 octets in length (inclusive).
Fixes#3160.
The compiler complains that "taking address of packed member ... of
class or structure 'ip6_hdr' may result in an unaligned pointer value".
We don't care if the address is aligned as we explicitly use untoh16()
to convert the read value.
BSD make only evaluates $< for implicit rules, so building from the
repository won't work unless GNU make is installed and used, or we
replace affected uses like this.
No idea when exactly this happens but on many Huawei devices (and
only on them) it seems that onStartListening is sometimes called after
onDestroy i.e. when the database was already closed. This caused an
InvalidStateException in getProfile via updateTile when retrieving the
current profile. It's possible that it happens during shutdown (there
have been similar reports related to TileService implementations) so
users might not even notice, but it pollutes the Play Console, so this
workaround now makes sure the database is open when updateTile is called.
When missing gperf, the redirection generates an empty file, which must
be manually removed after gperf has been installed. This is difficult
to diagnose, as the produced build error is cryptic.
Use --output-file of gperf instead to avoid creating an empty file if
gperf is missing. This still requires the user to re-run ./configure
after installing gperf, though.
Compiling with GCC 9.1, as e.g. happens on AppVeyor, results in the
following warning:
asn1/asn1.c: In function 'asn1_integer':
asn1/asn1.c:871:24: error: '<Ucb40>' may be used uninitialized in this function [-Werror=maybe-uninitialized]
871 | len = content.len + ((*content.ptr & 0x80) ? 1 : 0);
| ^~~~~~~~~~~~
Some experiments showed that the problem was the chunk_from_chars()
assignment. This might be because the temporary chunk_t that was assigned
to the variable was defined in a sub-block, so it might actually be
undefined later when *content.ptr is read.
This allows using the certificate, which is technically a CA cert, as
end-entity certificate again after the RFC4945-related changes added
with 5.6.3.
Fixes#3139.
Each private key object created to access a key residing in a TPM 2.0
creates a context structure used for communication with the TSS.
When multiple IKE SAs are established at the same time and using the
same private key, it is possible to make concurrent calls to the
TSS with the same context which results in multiple threads writing
to the same place in memory causing undefined behaviour.
Fix this by protecting calls to the TSS with a mutex unique for
each TPM 2.0 context object.
By default, charon and its derivatives internally handle the SIGSEGV,
SIGILL, and SIGBUS signals raised by threads (segv_handler). Add a compile
option so that the signal handling can optionally be done externally.
Closesstrongswan/strongswan#132.
If CHILD_SAs are created while waiting for the third QM message we'd not
notice the redundancy and updown events would be triggered unevenly.
This is consistent with the behavior on the initiator, which already does
this check right before installation. Moving the existing check is not
possible due to the narrow hook and moving the installation changes which
peer installs the SAs first and could have other side-effects (e.g. in
error or conflict cases). Still, this might result in CHILD_SA state
discrepancies between the two peers.
Fixes#3060.
If the key type was specified but the ID was NULL or matched a subject, it
was possible that a certificate was returned that didn't actually match
the requested key type.
Closesstrongswan/strongswan#141.
Checking specifically for /proc/net/pfkey is not ideal as af_key will
eventually be removed in Linux kernels. Support for KLIPS is long gone.
The detection also wasn't used for anything anymore (failures were just
ignored since the ports to BSD-based systems). And modprobing doesn't seem
to be necessary either (charon-systemd doesn't do that, for instance).
Usually, changing this won't be necessary (actually, some plugins
specifically use different DRGBs for RNG_WEAK in order to separate
the public nonces from random data used for e.g. DH).
But for experts with special plugin configurations this might be
more flexible and avoids code changes.
Also expose a method to call arbitrary commands, which allows calling not
yet wrapped commands. Exceptions are raised for all commands if the response
includes a negative "success" key (similar to how it's done in the Python
bindings).
Luckily, the type is only used once when generating payloads and there it
doesn't matter because the encoding rules are the same.
Closesstrongswan/strongswan#135.
The main fixes are
* the generation of fingerprints for RSA, ECDSA, and EdDSA
* the encoding of ECDSA private keys
* calculating p and q for RSA private keys
* deriving the public key for raw Ed25519 private keys
Also, instead of numeric literals for buffer lengths ASN.1 related
constants are used.
Instead of assuming passwords are simply ASCII-encoded we now assume they are
provided UTF-8-encoded, which is quite likely nowadays. The UTF-8 byte
sequences are not validated, however, only valid code points are encoded
as UTF-16LE.
Fixes#3014.
Previously, the initiator would install the SA in transport mode if the
peer sent back the USE_TRANSPORT_MODE notify, even if that was not
requested originally.
The only messages that are generally sent encrypted but could be sent
unencrypted are INFORMATIONALs (currently only used for IKEv1 and ME
connectivity checks). This should prevent issues if the keymat_t behaves
incorrectly and does not return an aead_t when it actually should.
Might be useful for users of other daemons too. Note that compared to the
previous implementation in charon-tkm, the mask/label are applied in
network order.
Closesstrongswan/strongswan#134.
Previously, attributes in an incorrectly sent CFG_REPLY would still be passed
to attribute handlers. This does not prevent handlers from receiving
unrequested attributes if they requested at least one other.
This is mainly to see what's necessary to create them (in case we
integrate this into the daemon) and to experiment in our testing
environment without having to add a patched version of iproute2 (the
4.20.0 version in stretch-backports doesn't support XFRM interfaces
yet). The regular version of iproute2 can be used for other operations
with these interfaces (delete, up, addrs etc.).
The PB-TNC finite state machine according to section 3.2 of RFC 5793
was not correctly implemented when sending either a CRETRY or SRETRY
batch. These batches can only be sent in the "Decided" state and a
CRETRY batch can immediately carry all messages usually transported
by a CDATA batch. strongSwan currently is not able to send a SRETRY
batch since full-duplex mode for PT-TLS isn't supported yet.
The bits not written to are marked tainted by valgrind, don't print
them in the debug messages. Also use more specific printf-specifiers
for other values.
There was a race condition between install() and uninstall()
where one thread was in the process of installing a trap
entry, and had destroyed the child_sa, while the other
thread was uninstalling the same trap entry and ended up
trying to destroy the already destroyed child_sa, resulting
in a segmentation fault in the destroy_entry() function.
The uninstall() function needs to wait until all the threads
are done with the installing before proceeding to uninstall
a trap entry.
Closesstrongswan/strongswan#131.
This can be the case for IKEv1 since 419ae9a20a ("ikev1: Default remote
identity to %any for PSK lookup if not configured").
Closesstrongswan/strongswan#128.
This seems to avoid broadcast loops (i.e. processing and reinjecting the
same broadcast packet over and over again) as the packets we send via
AF_PACKET socket are neither marked nor from that interface.
In order to avoid that the kernel uses virtual tunnel IPs for traffic
over physical interfaces we previously deprecated the virtual IP. While
this is working it is not ideal. This patch adds address labels for
virtual IPs, which should force the kernel to avoid such addresses to
reach any destination unless there is an explicit route that uses it as
source address.
Using parse_time() directly actually overwrites the next member in the
child_cfg_create_t struct, which is start_action, which can cause
incorrect configs if inactivity is parsed after start_action.
Fixes#2954.
Some users requests something like that to use different server IPs.
Interestingly, it's actually also possible to configure multiple
hostnames/IPs, separated by commas, as server address in the profile, which
are then tried one after another.
It's also useful when testing stuff to quickly compare the behavior with
some setting changed between two otherwise identical profiles.
A temporary DROP policy is added to avoid traffic leak
while the SA is being updated. It is added with
manual_prio set but when the temporary policy is removed
it is removed with manual_prio parameter set to 0.
The call to del_policies_outbound does not match the original
policy and we end up with an ever increasing refcount.
If we try to manually remove the policy, it is not removed
due to the positive refcount. Then new SA requests fail with
"unable to install policy out for reqid 1618,
the same policy for reqid 1528 exists"
Fixes: 35ef1b032d ("child-sa: Install drop policies while updating IPsec SAs and policies")
Closesstrongswan/strongswan#129.
Instead, create a socket when necessary. Apparently, it can prevent
the agent from getting terminated (e.g. during system shutdown) if e.g.
charon-nm is still running with an open connection to the agent.
In 7b7290977 ("controller: Add option to force destruction of an IKE_SA")
the 'force' option was added as 3rd parameter to controller_t::terminate_ike.
However in vici's 'clear_start_action', the argument was incorrectly
placed as the 2nd parameter - constantly sending 0 (FALSE) as the
'unique_id' to terminate, rendering calls to 'handle_start_actions'
having undo=TRUE being unable to terminate the relevant conn.
For example, this is log of such a bogus 'unload-conn':
strongswan[498]: 13[CFG] vici client 96 requests: unload-conn
strongswan[498]: 13[CFG] closing IKE_SA #9
strongswan[498]: 13[IKE] unable to terminate IKE_SA: ID 0 not found
strongswan[498]: 09[CFG] vici client 96 disconnected
here, the unloaded conn's IKE id was 9, alas 'terminate_ike_execute'
reports failure to terminate "ID 0".
Fix by passing 'id, FALSE' arguments in the correct order.
Fixes: 7b7290977 ("controller: Add option to force destruction of an IKE_SA")
Signed-off-by: Shmulik Ladkani <shmulik@metanetworks.com>
Closesstrongswan/strongswan#127.
Up to now it was assumed that the RSA public key exponent is equal to 2^16+1.
Although this is probably true in most if not all cases, it is not correct
according to the TPM 2.0 specification.
This patch fixes that by reading the exponent from the structure returned
by TPM2_ReadPublic.
Closesstrongswan/strongswan#121.
All directories are now considered relative to the loaded swanctl.conf
file, in particular, when loading it from a custom location via --file
argument. The base directory, which is used if no custom location for
swanctl.conf is specified, is now also configurable at runtime via
SWANCTL_DIR environment variable.
Closesstrongswan/strongswan#120.
The functional reference created by ENGINE_init() was never released,
only the structural one created by ENGINE_by_id(). The functional
reference includes an implicit structural reference, which is also
released by ENGINE_finish().
Closesstrongswan/strongswan#119.
This is particularly important for higher number of segments, but even
with small numbers there is a significant difference. For instance,
with 4 segments the fourth segment had no IPs assigned with the old
code, no matter how large the pool, because none of the eight bits used
for the segment check hashed/mapped to it.
Upcoming versions of FreeBSD will include an SADB_X_EXT_SA2 extension in
acquires that contains the reqid set on the matching policy. This allows
handling acquires even when no policies are installed (e.g. to work with
FreeBSD's implementation of VTI interfaces, which manage policies
themselves).
Same issue with signature malleability as with Ed25519 and apparently
OpenSSL doesn't even explicitly verify that the most significant 10 bits
are all zero.
As per RFC 8032, section 5.1.7 (and section 8.4) we have to make sure s, which
is the scalar in the second half of the signature value, is smaller than L.
Without that check, L can be added to most signatures at least once to create
another valid signature for the same public key and message.
This could be problematic if, for instance, a blacklist is based on hashes
of certificates. A new certificate could be created with a different
signature (without knowing the signature key) by simply adding L to s.
Currently, both OpenSSL 1.1.1 and Botan 2.8.0 are vulnerable to this, which is
why the unit test currently only warns about it.
OpenSSL 1.1.1 introduces DRGBs and provides two sources (same security
profile etc. but separate internal state), which allows us to use one for
RNG_WEAK (e.g. for nonces that are directly publicly visible) and the other
for stronger random data like keys.
While X25519 was already added with 1.1.0a, its use would be a lot more
complicated, as the helpers like EVP_PKEY_new_raw_public_key() were only
added in 1.1.1, which also added X448.
In case a subnet is moved from one interface to another the policies can
remain as is but the route has to change. This currently doesn't happen
automatically and there is no option to update the policy or route so
removing and reinstalling the policies is the only option.
Fixes#2820.
The peer might not have seen the CREATE_CHILD_SA response yet, receiving a
DELETE for the SA could then trigger it to abort the rekeying, causing
the deletion of the newly established SA (it can't know whether the
DELETE was sent due to an expire or because the user manually deleted
it). We just treat this SA as if we received a DELETE for it. This is
not an ideal situation anyway, as it causes some traffic to get dropped,
so it should usually be avoided by setting appropriate soft and hard limits.
References #2815.
Because the file is not available on all platforms the inclusion comes
after the user options in order to disable including it. But that means
the inclusion also follows after the defined scanner states, which are
generated as simple #defines to numbers. If the included unistd.h e.g.
uses variables in function definitions with the same names this could
result in compilation errors.
Interactive mode has to be disabled too as it relies on isatty() from
unistd.h. Since we don't use the scanners interactively, this is not a
problem and might even make the scanners a bit faster.
Fixes#2806.
According to gcrypt.h these callbacks are not used anymore since
version 1.6 and with clang these actually cause deprecation warnings
that let the build on travis (-Werror) fail.
This is because OpenSSL 1.1 started to use atexit()-handlers of its own
to clean up. Since the plugin is loaded and initialized after libcharon,
OpenSSL's cleanup functions ran before the daemon was properly
deinitialized (i.e. worker threads were still running and OpenSSL might
still be used during the deinit). So several of OpenSSL's internal
structures were already destroyed when libcharon_deinit() was eventually
called via our own atexit()-handler.
The observed behavior was that the daemon couldn't be terminated properly
anymore for some test scenarios (only three TNC scenarios were affected
actually). When the daemon tried to send the DELETE for the established
IKE_SA during its termination it got stuck in OpenSSL's RNG_WEAK
implementation (used to allocate random padding), which apparently tries
to acquire an rwlock that was already destroyed. The main thread then
just busy-waited indefinitely on the lock, i.e. until systemd killed
it eventually after a rather long timeout.
We'll probably have to apply similar changes to other apps/scripts that
load plugins and currently use atexit() to clean up. Although some
scripts (e.g. dh_speed or hash_burn) are not affected because they
register the deinitialization after loading the plugins.
If a lot of QUICK_MODE tasks are queued and the other side
sends a DPD request, there is a good chance for timeouts.
Observed this in cases where other side is quite slow in responding
QUICK_MODE requests (e.g. Cisco ASA v8.x) and about 100 CHILD_SAs
are to be spawned.
Closesstrongswan/strongswan#115.