Although being already logged on level 2, these messages are usually just
confusing if they pop up randomly in the log when e.g. querying the configs
or installing traps. So after this the log messages will only be logged when
actually proposing or selecting traffic selectors during IKE.
Until now the configuration available to user for HW offload were:
hw_offload = no
hw_offload = yes
With this commit users will be able to configure auto mode using:
hw_offload = auto
Signed-off-by: Adi Nissim <adin@mellanox.com>
Reviewed-by: Aviv Heller <avivh@mellanox.com>
This fixes two issues, one is a bug if a DH group is configured for the
local ESP proposals and charon.prefer_configured_proposals is disabled.
This would cause the DH groups to get stripped not from the configured but
from the supplied proposal, which usually already has them stripped. So
the proposals wouldn't match. We'd have to always strip them from the local
proposal. Since there are apparently implementations that, incorrectly, don't
remove the DH groups in the IKE_AUTH exchange (e.g. WatchGuard XTM25
appliances) we just strip them from both proposals. It's a bit more lenient
that way and we don't have to complicate the code to only clone and strip the
local proposal, which would depend on a flag.
References #2503.
Usually, %dynamic is used as traffic selector for transport mode SAs,
however, if wildcard traps are used then the remote TS will be a subnet.
With strongSwan at the remote end that usually works fine as the local
%dynamic TS narrows the proposed TS appropriately. But some
implementations reject non-host TS for transport mode SAs.
Another problem could be if several distinct subnets are configured for a
wildcard trap, as we'd then propose unrelated subnets on that transport
mode SA, which might be problematic even for strongSwan (switch to tunnel
mode and duplicate policies).
Closesstrongswan/strongswan#61.
If charon.prefer_configured_proposals is disabled select() is called on
the received proposal. This incorrectly set the SPI to 0 as the
configured proposal has no SPI set.
Fixes#2190.
Tobias Brunner