We don't retransmit DPD requests like we do requests for proper exchanges,
so increasing the number with each sent DPD could result in the peer's state
getting out of sync if DPDs are lost. Because according to RFC 3706, DPDs
with an unexpected sequence number SHOULD be rejected (it does mention the
possibility of maintaining a window of acceptable numbers, but we currently
don't implement that). We partially ignore such messages (i.e. we don't
update the expected sequence number and the inbound message stats, so we
might send a DPD when none is required). However, we always send a response,
so a peer won't really notice this (it also ensures a reply for "retransmits"
caused by this change, i.e. multiple DPDs with the same number - hopefully,
other implementations behave similarly when receiving such messages).
Fixes#2714.
This is mainly for HA where a passive SA was already created when the
IKE keys were derived. If e.g. an authentication error occurs later that
SA wouldn't get cleaned up.
The reload of the configuration of the loggers so far only included
the log levels. In order to support the reload of all other options,
a reload function may be implemented.
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
The options control whether the DF and ECN header bits/fields are copied
from the unencrypted packets to the encrypted packets in tunnel mode (DF only
for IPv4), and for ECN whether the same is done for inbound packets.
Note: This implementation only works with Linux/Netlink/XFRM.
Based on a patch by Markus Sattler.
During a test with ~12000 established SAs it was noted that vici
related operations hung.
The operations took over 16 minutes to finish. The time was spent in
the vici message parser, which was assigning the message over and over
again, to get rid of the already parsed portions.
First fixed by cutting the consumed parts off without copying the message.
Runtime for ~12000 SAs is now around 20 seconds.
Further optimization brought the runtime down to roughly 1-2 seconds
by using an fd to read through the message variable.
Closesstrongswan/strongswan#103.
The code to support parallel Netlink queries (commit 3c7193f) made use
of nlmsg_len member from struct nlmsghdr to allocate and copy the
responses. Since NLMSG_NEXT is later used to parse these responses, they
must be aligned, or the results are undefined.
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
macOS supports AES_GCM_ICV16 natively using PF_KEYv2.
This change enables AES_GCM if the corresponding definition is detected
in the headers.
With this change it is no longer necessary to use the libipsec module to
use AES_GCM on macOS.
Closesstrongswan/strongswan#107.
Removing and readding the entry to a potentially different row/segment,
while driving out waiting and new threads, could prevent threads from
acquiring the SA even if they were waiting to check it out by unique
ID (which doesn't change), or if they were just trying to enumerate it.
With this change the row and segment doesn't change anymore and waiting
threads may acquire the SA. However, those looking for an IKE_SA by SPIs
might get one back that has a different SPI (but that's probably not
something that happens very often this early).
This was noticed because we check out SAs by unique ID in the Android
app to terminate them after failed retransmits if we are not reestablishing
the SA (otherwise we continue), and this sometimes failed.
Fixes: eaedcf8c00 ("ike-sa-manager: Add method to change the initiator SPI of an IKE_SA")
Instead of logging the search parameters for IKE configs (which were already
before starting the lookup) we log the configured settings.
The peer config lookup is also changed slightly by doing the IKE config
match first and skipping some checks if that or the local peer identity
doesn't match.
Although being already logged on level 2, these messages are usually just
confusing if they pop up randomly in the log when e.g. querying the configs
or installing traps. So after this the log messages will only be logged when
actually proposing or selecting traffic selectors during IKE.
This way we don't rely on the order of equally matching configs as
heavily anymore (which is actually tricky in vici) and this also doesn't
require repeating weak algorithms in all configs that might potentially be
selected if there are some clients that require them.
There is currently no ordering, so an explicitly configured exactly matching
proposal isn't a better match than e.g. the default proposal that also
contains the proposed algorithms.
In some scenarios we might find multiple usable peer configs with different
IKE proposals. This is a problem if we use a config with non-matching
proposals that later causes IKE rekeying to fail. It might even be a problem
already when creating the CHILD_SA if the proposals of IKE and CHILD_SA
are consistent.
This allows switching to probing mode if the client is on a public IP
and this is the active task and connectivity gets restored. We only add
NAT-D payloads if we are currently behind a NAT (to detect changed NAT
mappings), a MOBIKE update that might follow will add them in case we
move behind a NAT.
In case the PRF's set_key() or allocate_bytes() method failed, skeyseed
was not initialized and the chunk_clear() call later caused a crash.
This could have happened with OpenSSL in FIPS mode when MD5 was
negotiated (and test vectors were not checked, in which case the PRF
couldn't be instantiated as the test vectors would have failed).
MD5 is not included in the default proposal anymore since 5.6.1, so
with recent versions this could only happen with configs that are not
valid in FIPS mode anyway.
Fixes: CVE-2018-10811
We now check if there are other routes tracked for the same destination
and replace the installed route instead of just removing it. Same during
installation, where we previously didn't replace existing routes due to
NLM_F_EXCL. Routes with virtual IPs as source address are preferred over
routes without.
This should allow using trap policies with virtual IPs on Linux.
Fixes#85, #2162.