This can be useful if the subject DN has to be configured with the
asn1dn: prefix in ipsec.conf (e.g. because the actual encoding can't be
created by strongSwan's string parser/encoder).
Vendor specific EAP methods may be registered with:
PLUGIN_CALLBACK(eap_method_register, <constructor>),
PLUGIN_PROVIDE(EAP_SERVER_VENDOR, <type>, <vendor>),
Same for client implementations via EAP_PEER_VENDOR.
References #969.
Calling malloc() after fork() is potentially unsafe, so we should avoid
it if possible. opendir() will still require an allocation but that's
less than the variant using the enumerator wrapper, thus, decreasing
the conflict potential. This way we can also avoid closing the
FD for the enumerated directory itself.
References #990.
Documents the ike/child-updown events and adds a ike/child-rekey event
and a new listen() method in the Python VICI bindings to listen for
arbitrary events (similar to the listen_events() method in the Ruby
bindings).
This may be the case when SAs are reestablished after a crash of the
IKE daemon.
We could actually always do updates. The kernel doesn't care, the only
difference is the possible EEXIST if XFRM_MSG_NEWPOLICY is used. The
advantage of not doing this, though, is that we get a warning in the log
if a policy already exists, as that should usually not be the case.
When strings in RDNs contain characters outside the character set for
PrintableString use UTF8String as the passed string is most likely in
that encoding (RFC 5280 actually recommends to use only those two
string types).
strongSwan uses PrintableString when encoding DNs from strings (if the
character set permits it, otherwise T61String is currently used) but
certificates might be encoded with UTF8String even for simple ASCII strings.
By ignoring this string type when hashing RDNs we make sure the same hash
results in this case as long as the actual string values are the same.
Fixes#991.
Compared to hashing the encoding we can ignore string types of RDNs when
hashing DNs, making hash() compatible to equals() that does the same.
Fixes#991.
Some tokens/libraries seem to prefix all numbers with zero bytes even
if not necessary (e.g. the default exponent 0x010001). If we don't fix
that, the fingerprints calculated based on the retrieved values will be
incorrect.
Even if the pkcs1 plugin can properly handle numbers that are not in
two's complement since a81bd670b0 ("Added PUBKEY_RSA_MODULUS
encoding type") we prefix them with zero if necessary as other encoders
might expect them in two's complement.
Fixes#1012.
If a client does Mode Config during reauthentication the assign_vips()
event might be triggered twice, we should not send another Start message
in that case.
Fixes#937.
Some clients won't do Mode Config or XAuth during reauthentication.
Because Start messages previously were triggered by TRANSACTION exchanges
none were sent for new SAs of such clients, while Stop messages were still
sent for the old SAs when they were destroyed. This resulted in an
incorrect state on the RADIUS server.
Since 31be582399 the assign_vips() event is also triggered during
reauthentication if the client does not do a Mode Config exchange.
So instead of waiting for a TRANSACTION exchange we trigger the Start
message when a virtual IP is assigned to a client.
With this the charon.plugins.eap-radius.accounting_requires_vip option
would not have any effect for IKEv1 anymore. However, it previously also
only worked if the client did an XAuth exchange, which is probably
rarely used without virtual IPs, so this might not be much of a
regression.
Fixes#937.
When compiling with -Wextra (and without disabling these warnings
globally) the tests would otherwise fail due to the unused arguments in
the cmp() functions.
Fixes#1053.
When precision is given for a string, we must not run unbounded
strlen() as it will read beyond the given length. It might even cause
a crash if the given pointer is near end of heap or mapping.
Fixes numerous valgrind errors such as:
==19215== Invalid read of size 1
==19215== at 0x52D36C6: builtin_vsnprintf (printf_hook_builtin.c:853)
==19215== by 0x52D40A8: builtin_snprintf (printf_hook_builtin.c:1084)
==19215== by 0x52CE464: dntoa (identification.c:337)
==19215== by 0x52CE464: identification_printf_hook (identification.c:837)
==19215== by 0x52D3DAA: builtin_vsnprintf (printf_hook_builtin.c:1010)
==19215== by 0x57040EB: vlog (bus.c:388)
==19215== by 0x570427D: log_ (bus.c:430)
==19215== by 0xA8445D3: load_x509_ca (stroke_cred.c:416)
==19215== by 0xA8445D3: load_certdir (stroke_cred.c:537)
==19215== by 0xA846A95: load_certs (stroke_cred.c:1353)
==19215== by 0xA846A95: stroke_cred_create (stroke_cred.c:1475)
==19215== by 0xA84073E: stroke_socket_create (stroke_socket.c:782)
==19215== by 0xA83F27C: register_stroke (stroke_plugin.c:53)
==19215== by 0x52C3125: load_feature (plugin_loader.c:716)
==19215== by 0x52C3125: load_provided (plugin_loader.c:778)
==19215== by 0x52C3A20: load_features (plugin_loader.c:799)
==19215== by 0x52C3A20: load_plugins (plugin_loader.c:1159)
==19215== Address 0x50cdb42 is 0 bytes after a block of size 2 alloc'd
==19215== at 0x4C919FE: malloc (vg_replace_malloc.c:296)
==19215== by 0x52CD198: chunk_printable (chunk.c:759)
==19215== by 0x52CE442: dntoa (identification.c:334)
==19215== by 0x52CE442: identification_printf_hook (identification.c:837)
==19215== by 0x52D3DAA: builtin_vsnprintf (printf_hook_builtin.c:1010)
==19215== by 0x57040EB: vlog (bus.c:388)
==19215== by 0x570427D: log_ (bus.c:430)
==19215== by 0xA8445D3: load_x509_ca (stroke_cred.c:416)
==19215== by 0xA8445D3: load_certdir (stroke_cred.c:537)
==19215== by 0xA846A95: load_certs (stroke_cred.c:1353)
==19215== by 0xA846A95: stroke_cred_create (stroke_cred.c:1475)
==19215== by 0xA84073E: stroke_socket_create (stroke_socket.c:782)
==19215== by 0xA83F27C: register_stroke (stroke_plugin.c:53)
==19215== by 0x52C3125: load_feature (plugin_loader.c:716)
==19215== by 0x52C3125: load_provided (plugin_loader.c:778)
==19215== by 0x52C3A20: load_features (plugin_loader.c:799)
==19215== by 0x52C3A20: load_plugins (plugin_loader.c:1159)
The kernel uses NLMSG_GOODSIZE as default buffer size, which defaults to
the PAGE_SIZE if it is lower than 8192 or to that value otherwise.
In some cases (e.g. for dump messages) the kernel might use up to 16k
for messages, which might require increasing this value.
It might equal it and that's fine. With MSG_TRUNC we get the actual
message size and can only report an error if we haven't received the
complete message.
If AEAD algorithms are used no integrity algorithm will be received from
the other HA node. But since AUTH_UNDEFINED is 1024 and not 0 this value
was incorrectly added to the proposal, resulting in a failure during key
derivation. The variables are now explicitly initialized to 0, as already
was the case for the IKE SAs.
Fixes#1051.
When the IKE_SA is synced without the remote address, after a
reauthentication charon is not able to find it in its connected_peers
table since the destination host will be %any (it's missing in the
message, hence the default from the newly created ike_sa_t -- %any --
will be used).
By adding the value to the HA_IKE_ADD message, we should be able to
solve this problem.
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
running_any is satisfied if at least one host is running. We could
easily add a running_all() helper to check if all hosts are running if
it turns out that's not strong enough.
Tobias Brunner