Evidently, onClick() may be called either before onStartListening() or
after onStopListening() has been called, which causes a crash when
trying to load a VpnProfile via mDataSource.
This partially reverts 3716af079e ("android: Avoid crash related to
TileService on Huawei devices").
Manually built dependencies are now built in a separate step after
packages have been installed as they might depend themselves on some
packages (e.g. tpm2-tss, which now requires libjson-c).
This change allows to customize the previously hard-coded remote traffic
selectors.
This does not actually write the newly added "remote-ts" configuration option
into NetworkManager's configuration file, but will use an existing value.
Exposing the config setting in the GUI could be done later if this is a
desired change.
Use case: remote firewall appliance wrongly accepts the `0.0.0.0/0` TS but
does not actually route external traffic, leaving the user with a partially
working internet connection.
Closesstrongswan/strongswan#173.
If we fail connecting to the host we got redirected to, we should restart
with the original host where we might get redirected to a different host.
We must not reset this when retrying due to INVALID_KE_PAYLOAD or COOKIE
notifies. Since we keep the initiator SPI in those cases, we use that
flag as indicator.
Since we don't store the original remote_host value, we can't restore
that. So there is a potential conflict with MIPv6.
Closesstrongswan/strongswan#171.
The height of the dialog increased due to the recently added additional
fields for certificate selection and identities. On some screens the
fields to configure custom proposals were not visible anymore.
Together with less spacing on the top level GtkBox this change reduces
the height by about 80 pixels.
Fixes#3448.
The path '/usr/share/appdata' is deprecated as is the .appdata.xml
extension, files should be in installed in '/usr/share/metainfo' with
a .metainfo.xml extension.
According to the docs, the metainfo path should be well supported even
by older distros like Ubuntu 16.04.
Reference: 2.1.2. Filesystem locations
https://www.freedesktop.org/software/appstream/docs/chap-Metadata.html
The need_secrets() method is called before connect() (where we clear the
previous secrets too), so e.g. a password-protected private could be
decrypted with the cached password from earlier but if the password was not
stored with the connection, it would later fail as no password was requested
from the user that could be passed to connect().
References #3428.
On newer desktops the auth dialog is called with --external-ui-mode and
it seems that the password flag has to be set, otherwise the password is
not stored temporarily in the profile and passed to charon-nm (not sure
how this works exactly as need_secrets() is called multiple times even
after the password was already entered, only before doing so the last
time is the password available in that callback, but only if the flag
was set). This now also allows storing the password for the private key
with the profile.
Fixes#3428.
Due to the exponential backoff a high number of retransmits only
makes sense if retransmit_limit is set. However, even with that there
was a problem.
We first calculated the timeout for the next retransmit and only then
compared that to the configured limit. Depending on the configured
base and timeout the calculation overflowed the range of uint32_t after
a relatively low number of retransmits (with the default values after 23)
causing the timeout to first get lower (on a high level) before constantly
resulting in 0 (with the default settings after 60 retransmits).
Since that's obviously lower than any configured limit, all remaining
retransmits were then sent without any delay, causing a lot of concurrent
messages if the number of retransmits was high.
This change determines the maximum number of retransmits until an
overflow occurs based on the configuration and defaults to UINT32_MAX
if that value is exceeded. Note that since the timeout is in milliseconds
UINT32_MAX equals nearly 50 days.
The calculation in task_manager_total_retransmit_timeout() uses a double
variable and the result is in seconds so the maximum number would be higher
there (with the default settings 1205). However, we want its result to
be based on the actual IKE retransmission behavior.
Some peers apparently don't send the notify and still expect to
authenticate with EAP-only authentication. This option allows forcing
the configured use of EAP-only authentication in that scenario.
If such a task was active while reestablishing it will get queued on the
new IKE_SA. If the DH group is already set, the DH groups won't be
stripped from the proposals and a KE payload will be sent, which is invalid
during IKE_AUTH. We don't want to reset the group if the task is part of a
child-rekey task.
Otherwise, the output is buffered when e.g. piping the output to another
command (or file). And it avoids having to call fflush() in the
interactive mode.
Fixes#3404.
SHA-3 is only automatically enabled on x86/x64. The tests are disabled
because we don't need them and they currently cause a compile warning/error
when built with clang on x64 (sizeof() on a pointer to an array). If the
examples are enabled, another test suite is built, which includes the
disabled crypto tests.
The file is usually opened/created by root, however, if user/group IDs
are configured and the configuration is reloaded, the file will be reopened
as configured user. Like with UNIX sockets we only attempt to change
the user if we have CAP_CHOWN allowing a start as regular user.
We don't have chown() on Windows, so check for it.
If cards/libraries don't support signature mechanisms with hashing, we fall
back to do it ourselves in software and pass the PKCS#1 digestInfo ASN.1
structure to sign via CKM_RSA_PKCS mechanism.
Closesstrongswan/strongswan#168.
OpenSSL currently doesn't support squeezing bytes out of an XOF multiple
times. Unfortunately, EVP_DigestFinalXOF() completely resets the context
and later calls not simply fail, they cause a null-pointer dereference in
libcrypto. This fixes the crash at the cost of repeating initializing
the whole state and allocating too much data for subsequent calls.
There is an open issue and PR that might add a function that allows
squeezing more data from an XOF in a future version of OpenSSL.
strtol(3) accepts values in the range of [LONG_MIN;LONG_MAX]. Based
on the architecture (32 or 64 bits), these values expand to either
0x8000000000000000/0x7fffffffffffffff for 64-bit builds, or
0x80000000/0x7fffffff for 32-bit builds.
The behavior when retrieving non-default values for charon.spi_min or
charon.spi_max, for example, depends on the architecture of the target
platform. While 0xC000001/0xCFFFFFFE work fine on a 64-bit build, on a
32-bit build, due to the use of strtol(3), an ERANGE causes get_int()
to return the default values.
By using strtoul(3) the default is only returned if the input value
exceeds 32 or 64 bits, based on the platform. Negative values are still
parsed correctly.
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
Implements simpler routes for passthrough policies on Linux, which
basically act as fallbacks on routes in other routing tables. This way
they require less information (e.g. no interface or source IP) and can
be installed earlier and are not affected by updates.
Closes strongswan/strongswan#165.
Fixes#3118.
Enables us to ignore any future kernel features for routes unless
we actually need to consider them for the source IP routes.
Also enables us to actually really skip IPsec processing for those networks
(because even the routes don't touch those packets). It's more what
users expect.
Co-authored-by: Tobias Brunner <tobias@strongswan.org>
This is mainly an issue on FreeBSD where the current kernel still only
allows the daemon to use reqids < IPSEC_MANUAL_REQID_MAX (0x3fff = 16383).
Fixes#2315.
Charon refuses to make use of algorithms IDs from the private space
for unknown peer implementations [1]. If you chose to ignore and violate
that section of the RFC since you *know* your peers *must* support those
private IDs, there's no way to disable that behavior.
With this commit a strongswan.conf option is introduced which allows to
deliberately ignore parts of section 3.12 from the standard.
[1] http://tools.ietf.org/html/rfc7296#section-3.12
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
Doing this for the self-signed check also (i.e. if this and issuer are
the same) is particularly useful if the issuer uses a different key type.
Otherwise, we'd try to verify the signature with an incompatible key
that would result in a log message.
Fixes#3357.
With these changes we return the lifetimes of the actually selected
transform back to the client, which is an issue if the peer uses
different lifetimes for different proposals. We now also return the
correct transform and proposal IDs.
Fixes#3329.
Tobias Brunner