deleted IKEv1 charon-pluto interoperability scenarios
This commit is contained in:
parent
4d21846912
commit
4745fce666
|
@ -1,4 +0,0 @@
|
|||
Roadwarrior <b>carol</b> proposes to gateway <b>moon</b> the strong cipher suite
|
||||
<b>SERPENT_CBC_256 / HMAC_SHA2_512 / MODP_4096</b> for the IKE protocol and
|
||||
<b>SERPENT_CBC_256 / HMAC_SHA2_512_256 </b> for ESP packets. A ping from <b>carol</b> to
|
||||
<b>alice</b> successfully checks the established tunnel.
|
|
@ -1,13 +0,0 @@
|
|||
carol::ipsec status 2> /dev/null::home.*ESTABLISHED.*carol@strongswan.org.*moon.strongswan.org::YES
|
||||
moon:: ipsec status 2> /dev/null::rw.*STATE_MAIN_R3.*sent MR3, ISAKMP SA established::YES
|
||||
carol::ipsec status 2> /dev/null::home.*INSTALLED, TUNNEL::YES
|
||||
moon:: ipsec status 2> /dev/null::rw.*STATE_QUICK_R2.*IPsec SA established::YES
|
||||
carol::ipsec statusall 2> /dev/null::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512_256::YES
|
||||
moon:: ipsec statusall 2> /dev/null::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512/MODP_4096::YES
|
||||
carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
|
||||
carol::ipsec statusall 2> /dev/null::SERPENT_CBC_256/HMAC_SHA2_512_256,::YES
|
||||
moon:: ipsec statusall 2> /dev/null::ESP proposal: SERPENT_CBC_256/HMAC_SHA2_512::YES
|
||||
carol::ip xfrm state::enc cbc(serpent)::YES
|
||||
moon:: ip xfrm state::enc cbc(serpent)::YES
|
||||
moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 216::YES
|
||||
moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 216::YES
|
|
@ -1,22 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutostart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=serpent256-sha512-modp4096!
|
||||
esp=serpent256-sha512!
|
||||
|
||||
conn home
|
||||
left=PH_IP_CAROL
|
||||
leftcert=carolCert.pem
|
||||
leftid=carol@strongswan.org
|
||||
right=PH_IP_MOON
|
||||
rightsubnet=10.1.0.0/16
|
||||
rightid=@moon.strongswan.org
|
||||
auto=add
|
|
@ -1,10 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
charon {
|
||||
load = curl pem pkcs1 gcrypt nonce x509 revocation hmac xcbc stroke kernel-netlink socket-default updown
|
||||
send_vendor_id = yes
|
||||
}
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,26 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutodebug="control"
|
||||
crlcheckinterval=180
|
||||
strictcrlpolicy=no
|
||||
charonstart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=serpent256-sha2_512-modp4096!
|
||||
esp=serpent256-sha2_512!
|
||||
pfs=no
|
||||
|
||||
conn rw
|
||||
left=PH_IP_MOON
|
||||
leftcert=moonCert.pem
|
||||
leftid=@moon.strongswan.org
|
||||
leftsubnet=10.1.0.0/16
|
||||
right=%any
|
||||
rightid=carol@strongswan.org
|
||||
auto=add
|
|
@ -1,11 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
pluto {
|
||||
load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
|
||||
}
|
||||
|
||||
# pluto uses optimized DH exponent sizes (RFC 3526)
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,2 +0,0 @@
|
|||
moon::ipsec stop
|
||||
carol::ipsec stop
|
|
@ -1,5 +0,0 @@
|
|||
moon::echo 1 > /proc/sys/net/ipv4/ip_forward
|
||||
carol::ipsec start
|
||||
moon::ipsec start
|
||||
carol::sleep 2
|
||||
carol::ipsec up home
|
|
@ -1,22 +0,0 @@
|
|||
#!/bin/bash
|
||||
#
|
||||
# This configuration file provides information on the
|
||||
# UML instances used for this test
|
||||
|
||||
# All UML instances that are required for this test
|
||||
#
|
||||
UMLHOSTS="alice moon carol winnetou"
|
||||
|
||||
# Corresponding block diagram
|
||||
#
|
||||
DIAGRAM="a-m-c-w.png"
|
||||
|
||||
# UML instances on which tcpdump is to be started
|
||||
#
|
||||
TCPDUMPHOSTS="moon"
|
||||
|
||||
# UML instances on which IPsec is started
|
||||
# Used for IPsec logging purposes
|
||||
#
|
||||
IPSECHOSTS="moon carol"
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
Roadwarrior <b>carol</b> proposes to gateway <b>moon</b> the strong cipher suite
|
||||
<b>TWOFISH_CBC_256 / HMAC_SHA2_512 / MODP_4096</b> for the IKE protocol and
|
||||
<b>TWOFISH_CBC_256 / HMAC_SHA2_512_256 </b> for ESP packets. A ping from <b>carol</b> to
|
||||
<b>alice</b> successfully checks the established tunnel.
|
|
@ -1,13 +0,0 @@
|
|||
carol::ipsec status 2> /dev/null::home.*ESTABLISHED.*carol@strongswan.org.*moon.strongswan.org::YES
|
||||
moon:: ipsec status 2> /dev/null::rw.*STATE_MAIN_R3.*sent MR3, ISAKMP SA established::YES
|
||||
carol::ipsec status 2> /dev/null::home.*INSTALLED, TUNNEL::YES
|
||||
moon:: ipsec status 2> /dev/null::rw.*STATE_QUICK_R2.*IPsec SA established::YES
|
||||
carol::ipsec statusall 2> /dev/null::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512_256::YES
|
||||
moon:: ipsec statusall 2> /dev/null::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512/MODP_4096::YES
|
||||
carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
|
||||
carol::ipsec statusall 2> /dev/null::TWOFISH_CBC_256/HMAC_SHA2_512_256,::YES
|
||||
moon:: ipsec statusall 2> /dev/null::ESP proposal: TWOFISH_CBC_256/HMAC_SHA2_512::YES
|
||||
carol::ip xfrm state::enc cbc(twofish)::YES
|
||||
moon:: ip xfrm state::enc cbc(twofish)::YES
|
||||
moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 216::YES
|
||||
moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 216::YES
|
|
@ -1,22 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutostart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=twofish256-sha512-modp4096!
|
||||
esp=twofish256-sha512!
|
||||
|
||||
conn home
|
||||
left=PH_IP_CAROL
|
||||
leftcert=carolCert.pem
|
||||
leftid=carol@strongswan.org
|
||||
right=PH_IP_MOON
|
||||
rightsubnet=10.1.0.0/16
|
||||
rightid=@moon.strongswan.org
|
||||
auto=add
|
|
@ -1,10 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
charon {
|
||||
load = curl pem pkcs1 gcrypt nonce x509 revocation hmac xcbc stroke kernel-netlink socket-default updown
|
||||
send_vendor_id = yes
|
||||
}
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,26 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutodebug="control"
|
||||
crlcheckinterval=180
|
||||
strictcrlpolicy=no
|
||||
charonstart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=twofish256-sha2_512-modp4096!
|
||||
esp=twofish256-sha2_512!
|
||||
pfs=no
|
||||
|
||||
conn rw
|
||||
left=PH_IP_MOON
|
||||
leftcert=moonCert.pem
|
||||
leftid=@moon.strongswan.org
|
||||
leftsubnet=10.1.0.0/16
|
||||
right=%any
|
||||
rightid=carol@strongswan.org
|
||||
auto=add
|
|
@ -1,11 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
pluto {
|
||||
load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
|
||||
}
|
||||
|
||||
# pluto uses optimized DH exponent sizes (RFC 3526)
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,2 +0,0 @@
|
|||
moon::ipsec stop
|
||||
carol::ipsec stop
|
|
@ -1,5 +0,0 @@
|
|||
moon::echo 1 > /proc/sys/net/ipv4/ip_forward
|
||||
carol::ipsec start
|
||||
moon::ipsec start
|
||||
carol::sleep 2
|
||||
carol::ipsec up home
|
|
@ -1,22 +0,0 @@
|
|||
#!/bin/bash
|
||||
#
|
||||
# This configuration file provides information on the
|
||||
# UML instances used for this test
|
||||
|
||||
# All UML instances that are required for this test
|
||||
#
|
||||
UMLHOSTS="alice moon carol winnetou"
|
||||
|
||||
# Corresponding block diagram
|
||||
#
|
||||
DIAGRAM="a-m-c-w.png"
|
||||
|
||||
# UML instances on which tcpdump is to be started
|
||||
#
|
||||
TCPDUMPHOSTS="moon"
|
||||
|
||||
# UML instances on which IPsec is started
|
||||
# Used for IPsec logging purposes
|
||||
#
|
||||
IPSECHOSTS="moon carol"
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
Roadwarrior <b>carol</b> proposes to gateway <b>moon</b> the strong cipher suite
|
||||
<b>SERPENT_CBC_256 / HMAC_SHA2_512 / MODP_4096</b> for the IKE protocol and
|
||||
<b>SERPENT_CBC_256 / HMAC_SHA2_512_256 </b> for ESP packets. A ping from <b>carol</b> to
|
||||
<b>alice</b> successfully checks the established tunnel.
|
|
@ -1,13 +0,0 @@
|
|||
carol::ipsec status 2> /dev/null::home.*STATE_MAIN_I4.*ISAKMP SA established::YES
|
||||
moon:: ipsec status 2> /dev/null::rw.*ESTABLISHED.*moon.strongswan.org.*carol@strongswan.org::YES
|
||||
carol::ipsec status 2> /dev/null::home.*STATE_QUICK_I2.*IPsec SA established::YES
|
||||
moon:: ipsec status 2> /dev/null::rw.*INSTALLED, TUNNEL::YES
|
||||
carol::ipsec statusall 2> /dev/null::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512/MODP_4096::YES
|
||||
moon:: ipsec statusall 2> /dev/null::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512_256::YES
|
||||
carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
|
||||
carol::ipsec statusall 2> /dev/null::ESP proposal: SERPENT_CBC_256/HMAC_SHA2_512::YES
|
||||
moon:: ipsec statusall 2> /dev/null::SERPENT_CBC_256/HMAC_SHA2_512_256,::YES
|
||||
carol::ip xfrm state::enc cbc(serpent)::YES
|
||||
moon:: ip xfrm state::enc cbc(serpent)::YES
|
||||
moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 216::YES
|
||||
moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 216::YES
|
|
@ -1,26 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutodebug="control"
|
||||
crlcheckinterval=180
|
||||
strictcrlpolicy=no
|
||||
charonstart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=serpent256-sha2_512-modp4096!
|
||||
esp=serpent256-sha2_512!
|
||||
pfs=no
|
||||
|
||||
conn home
|
||||
left=PH_IP_CAROL
|
||||
leftcert=carolCert.pem
|
||||
leftid=carol@strongswan.org
|
||||
right=PH_IP_MOON
|
||||
rightsubnet=10.1.0.0/16
|
||||
rightid=@moon.strongswan.org
|
||||
auto=add
|
|
@ -1,11 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
pluto {
|
||||
load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
|
||||
}
|
||||
|
||||
# pluto uses optimized DH exponent sizes (RFC 3526)
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,22 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutostart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=serpent256-sha512-modp4096!
|
||||
esp=serpent256-sha512!
|
||||
|
||||
conn rw
|
||||
left=PH_IP_MOON
|
||||
leftcert=moonCert.pem
|
||||
leftid=@moon.strongswan.org
|
||||
leftsubnet=10.1.0.0/16
|
||||
right=%any
|
||||
rightid=carol@strongswan.org
|
||||
auto=add
|
|
@ -1,10 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
charon {
|
||||
load = curl pem pkcs1 gcrypt nonce x509 revocation hmac xcbc stroke kernel-netlink socket-default updown
|
||||
send_vendor_id = yes
|
||||
}
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,2 +0,0 @@
|
|||
moon::ipsec stop
|
||||
carol::ipsec stop
|
|
@ -1,5 +0,0 @@
|
|||
moon::echo 1 > /proc/sys/net/ipv4/ip_forward
|
||||
carol::ipsec start
|
||||
moon::ipsec start
|
||||
carol::sleep 2
|
||||
carol::ipsec up home
|
|
@ -1,22 +0,0 @@
|
|||
#!/bin/bash
|
||||
#
|
||||
# This configuration file provides information on the
|
||||
# UML instances used for this test
|
||||
|
||||
# All UML instances that are required for this test
|
||||
#
|
||||
UMLHOSTS="alice moon carol winnetou"
|
||||
|
||||
# Corresponding block diagram
|
||||
#
|
||||
DIAGRAM="a-m-c-w.png"
|
||||
|
||||
# UML instances on which tcpdump is to be started
|
||||
#
|
||||
TCPDUMPHOSTS="moon"
|
||||
|
||||
# UML instances on which IPsec is started
|
||||
# Used for IPsec logging purposes
|
||||
#
|
||||
IPSECHOSTS="moon carol"
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
Roadwarrior <b>carol</b> proposes to gateway <b>moon</b> the strong cipher suite
|
||||
<b>TWOFISH_CBC_256 / HMAC_SHA2_512 / MODP_4096</b> for the IKE protocol and
|
||||
<b>TWOFISH_CBC_256 / HMAC_SHA2_512_256 </b> for ESP packets. A ping from <b>carol</b> to
|
||||
<b>alice</b> successfully checks the established tunnel.
|
|
@ -1,13 +0,0 @@
|
|||
carol::ipsec status 2> /dev/null::home.*STATE_MAIN_I4.*ISAKMP SA established::YES
|
||||
moon:: ipsec status 2> /dev/null::rw.*ESTABLISHED.*moon.strongswan.org.*carol@strongswan.org::YES
|
||||
carol::ipsec status 2> /dev/null::home.*STATE_QUICK_I2.*IPsec SA established::YES
|
||||
moon:: ipsec status 2> /dev/null::rw.*INSTALLED, TUNNEL::YES
|
||||
carol::ipsec statusall 2> /dev/null::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512/MODP_4096::YES
|
||||
moon:: ipsec statusall 2> /dev/null::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512_256::YES
|
||||
carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
|
||||
carol::ipsec statusall 2> /dev/null::ESP proposal: TWOFISH_CBC_256/HMAC_SHA2_512::YES
|
||||
moon:: ipsec statusall 2> /dev/null::TWOFISH_CBC_256/HMAC_SHA2_512_256,::YES
|
||||
carol::ip xfrm state::enc cbc(twofish)::YES
|
||||
moon:: ip xfrm state::enc cbc(twofish)::YES
|
||||
moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 216::YES
|
||||
moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 216::YES
|
|
@ -1,26 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutodebug="control"
|
||||
crlcheckinterval=180
|
||||
strictcrlpolicy=no
|
||||
charonstart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=twofish256-sha2_512-modp4096!
|
||||
esp=twofish256-sha2_512!
|
||||
pfs=no
|
||||
|
||||
conn home
|
||||
left=PH_IP_CAROL
|
||||
leftcert=carolCert.pem
|
||||
leftid=carol@strongswan.org
|
||||
right=PH_IP_MOON
|
||||
rightsubnet=10.1.0.0/16
|
||||
rightid=@moon.strongswan.org
|
||||
auto=add
|
|
@ -1,11 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
pluto {
|
||||
load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
|
||||
}
|
||||
|
||||
# pluto uses optimized DH exponent sizes (RFC 3526)
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,22 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutostart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=twofish256-sha512-modp4096!
|
||||
esp=twofish256-sha512!
|
||||
|
||||
conn rw
|
||||
left=PH_IP_MOON
|
||||
leftcert=moonCert.pem
|
||||
leftid=@moon.strongswan.org
|
||||
leftsubnet=10.1.0.0/16
|
||||
right=%any
|
||||
rightid=carol@strongswan.org
|
||||
auto=add
|
|
@ -1,10 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
charon {
|
||||
load = curl pem pkcs1 gcrypt nonce x509 revocation hmac xcbc stroke kernel-netlink socket-default updown
|
||||
send_vendor_id = yes
|
||||
}
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,2 +0,0 @@
|
|||
moon::ipsec stop
|
||||
carol::ipsec stop
|
|
@ -1,5 +0,0 @@
|
|||
moon::echo 1 > /proc/sys/net/ipv4/ip_forward
|
||||
carol::ipsec start
|
||||
moon::ipsec start
|
||||
carol::sleep 2
|
||||
carol::ipsec up home
|
|
@ -1,22 +0,0 @@
|
|||
#!/bin/bash
|
||||
#
|
||||
# This configuration file provides information on the
|
||||
# UML instances used for this test
|
||||
|
||||
# All UML instances that are required for this test
|
||||
#
|
||||
UMLHOSTS="alice moon carol winnetou"
|
||||
|
||||
# Corresponding block diagram
|
||||
#
|
||||
DIAGRAM="a-m-c-w.png"
|
||||
|
||||
# UML instances on which tcpdump is to be started
|
||||
#
|
||||
TCPDUMPHOSTS="moon"
|
||||
|
||||
# UML instances on which IPsec is started
|
||||
# Used for IPsec logging purposes
|
||||
#
|
||||
IPSECHOSTS="moon carol"
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
Roadwarrior <b>carol</b> proposes to gateway <b>moon</b> the strong cipher suite
|
||||
<b>SERPENT_CBC_256 / HMAC_SHA2_512 / MODP_4096</b> for the IKE protocol and
|
||||
<b>SERPENT_CBC_256 / HMAC_SHA2_512_256 </b> for ESP packets. A ping from <b>carol</b> to
|
||||
<b>alice</b> successfully checks the established tunnel.
|
|
@ -1,13 +0,0 @@
|
|||
carol::ipsec status 2> /dev/null::home.*STATE_MAIN_I4.*ISAKMP SA established::YES
|
||||
moon:: ipsec status 2> /dev/null::rw.*STATE_MAIN_R3.*sent MR3, ISAKMP SA established::YES
|
||||
carol::ipsec status 2> /dev/null::home.*STATE_QUICK_I2.*IPsec SA established::YES
|
||||
moon:: ipsec status 2> /dev/null::rw.*STATE_QUICK_R2.*IPsec SA established::YES
|
||||
carol::ipsec statusall 2> /dev/null::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512/MODP_4096::YES
|
||||
moon:: ipsec statusall 2> /dev/null::IKE proposal: SERPENT_CBC_256/HMAC_SHA2_512/MODP_4096::YES
|
||||
carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
|
||||
carol::ipsec statusall 2> /dev/null::ESP proposal: SERPENT_CBC_256/HMAC_SHA2_512::YES
|
||||
moon:: ipsec statusall 2> /dev/null::ESP proposal: SERPENT_CBC_256/HMAC_SHA2_512::YES
|
||||
carol::ip xfrm state::enc cbc(serpent)::YES
|
||||
moon:: ip xfrm state::enc cbc(serpent)::YES
|
||||
moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 216::YES
|
||||
moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 216::YES
|
|
@ -1,25 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutodebug="control"
|
||||
crlcheckinterval=180
|
||||
strictcrlpolicy=no
|
||||
charonstart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=serpent256-sha2_512-modp4096!
|
||||
esp=serpent256-sha2_512!
|
||||
|
||||
conn home
|
||||
left=PH_IP_CAROL
|
||||
leftcert=carolCert.pem
|
||||
leftid=carol@strongswan.org
|
||||
right=PH_IP_MOON
|
||||
rightsubnet=10.1.0.0/16
|
||||
rightid=@moon.strongswan.org
|
||||
auto=add
|
|
@ -1,11 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
pluto {
|
||||
load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
|
||||
}
|
||||
|
||||
# pluto uses optimized DH exponent sizes (RFC 3526)
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,25 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutodebug="control"
|
||||
crlcheckinterval=180
|
||||
strictcrlpolicy=no
|
||||
charonstart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=serpent256-sha2_512-modp4096!
|
||||
esp=serpent256-sha2_512!
|
||||
|
||||
conn rw
|
||||
left=PH_IP_MOON
|
||||
leftcert=moonCert.pem
|
||||
leftid=@moon.strongswan.org
|
||||
leftsubnet=10.1.0.0/16
|
||||
right=%any
|
||||
rightid=carol@strongswan.org
|
||||
auto=add
|
|
@ -1,11 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
pluto {
|
||||
load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
|
||||
}
|
||||
|
||||
# pluto uses optimized DH exponent sizes (RFC 3526)
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,2 +0,0 @@
|
|||
moon::ipsec stop
|
||||
carol::ipsec stop
|
|
@ -1,5 +0,0 @@
|
|||
moon::echo 1 > /proc/sys/net/ipv4/ip_forward
|
||||
carol::ipsec start
|
||||
moon::ipsec start
|
||||
carol::sleep 2
|
||||
carol::ipsec up home
|
|
@ -1,22 +0,0 @@
|
|||
#!/bin/bash
|
||||
#
|
||||
# This configuration file provides information on the
|
||||
# UML instances used for this test
|
||||
|
||||
# All UML instances that are required for this test
|
||||
#
|
||||
UMLHOSTS="alice moon carol winnetou"
|
||||
|
||||
# Corresponding block diagram
|
||||
#
|
||||
DIAGRAM="a-m-c-w.png"
|
||||
|
||||
# UML instances on which tcpdump is to be started
|
||||
#
|
||||
TCPDUMPHOSTS="moon"
|
||||
|
||||
# UML instances on which IPsec is started
|
||||
# Used for IPsec logging purposes
|
||||
#
|
||||
IPSECHOSTS="moon carol"
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
Roadwarrior <b>carol</b> proposes to gateway <b>moon</b> the strong cipher suite
|
||||
<b>TWOFISH_CBC_256 / HMAC_SHA2_512 / MODP_4096</b> for the IKE protocol and
|
||||
<b>TWOFISH_CBC_256 / HMAC_SHA2_512_256 </b> for ESP packets. A ping from <b>carol</b> to
|
||||
<b>alice</b> successfully checks the established tunnel.
|
|
@ -1,13 +0,0 @@
|
|||
carol::ipsec status 2> /dev/null::home.*STATE_MAIN_I4.*ISAKMP SA established::YES
|
||||
moon:: ipsec status 2> /dev/null::rw.*STATE_MAIN_R3.*sent MR3, ISAKMP SA established::YES
|
||||
carol::ipsec status 2> /dev/null::home.*STATE_QUICK_I2.*IPsec SA established::YES
|
||||
moon:: ipsec status 2> /dev/null::rw.*STATE_QUICK_R2.*IPsec SA established::YES
|
||||
carol::ipsec statusall 2> /dev/null::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512/MODP_4096::YES
|
||||
moon:: ipsec statusall 2> /dev/null::IKE proposal: TWOFISH_CBC_256/HMAC_SHA2_512/MODP_4096::YES
|
||||
carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
|
||||
carol::ipsec statusall 2> /dev/null::ESP proposal: TWOFISH_CBC_256/HMAC_SHA2_512::YES
|
||||
moon:: ipsec statusall 2> /dev/null::ESP proposal: TWOFISH_CBC_256/HMAC_SHA2_512::YES
|
||||
carol::ip xfrm state::enc cbc(twofish)::YES
|
||||
moon:: ip xfrm state::enc cbc(twofish)::YES
|
||||
moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 216::YES
|
||||
moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 216::YES
|
|
@ -1,25 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutodebug="control"
|
||||
crlcheckinterval=180
|
||||
strictcrlpolicy=no
|
||||
charonstart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=twofish256-sha2_512-modp4096!
|
||||
esp=twofish256-sha2_512!
|
||||
|
||||
conn home
|
||||
left=PH_IP_CAROL
|
||||
leftcert=carolCert.pem
|
||||
leftid=carol@strongswan.org
|
||||
right=PH_IP_MOON
|
||||
rightsubnet=10.1.0.0/16
|
||||
rightid=@moon.strongswan.org
|
||||
auto=add
|
|
@ -1,11 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
pluto {
|
||||
load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
|
||||
}
|
||||
|
||||
# pluto uses optimized DH exponent sizes (RFC 3526)
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,25 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutodebug="control"
|
||||
crlcheckinterval=180
|
||||
strictcrlpolicy=no
|
||||
charonstart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=twofish256-sha2_512-modp4096!
|
||||
esp=twofish256-sha2_512!
|
||||
|
||||
conn rw
|
||||
left=PH_IP_MOON
|
||||
leftcert=moonCert.pem
|
||||
leftid=@moon.strongswan.org
|
||||
leftsubnet=10.1.0.0/16
|
||||
right=%any
|
||||
rightid=carol@strongswan.org
|
||||
auto=add
|
|
@ -1,11 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
pluto {
|
||||
load = pem pkcs1 x509 gcrypt nonce hmac curl kernel-netlink
|
||||
}
|
||||
|
||||
# pluto uses optimized DH exponent sizes (RFC 3526)
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,2 +0,0 @@
|
|||
moon::ipsec stop
|
||||
carol::ipsec stop
|
|
@ -1,5 +0,0 @@
|
|||
moon::echo 1 > /proc/sys/net/ipv4/ip_forward
|
||||
carol::ipsec start
|
||||
moon::ipsec start
|
||||
carol::sleep 2
|
||||
carol::ipsec up home
|
|
@ -1,22 +0,0 @@
|
|||
#!/bin/bash
|
||||
#
|
||||
# This configuration file provides information on the
|
||||
# UML instances used for this test
|
||||
|
||||
# All UML instances that are required for this test
|
||||
#
|
||||
UMLHOSTS="alice moon carol winnetou"
|
||||
|
||||
# Corresponding block diagram
|
||||
#
|
||||
DIAGRAM="a-m-c-w.png"
|
||||
|
||||
# UML instances on which tcpdump is to be started
|
||||
#
|
||||
TCPDUMPHOSTS="moon"
|
||||
|
||||
# UML instances on which IPsec is started
|
||||
# Used for IPsec logging purposes
|
||||
#
|
||||
IPSECHOSTS="moon carol"
|
||||
|
|
@ -1,6 +0,0 @@
|
|||
The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each
|
||||
to gateway <b>moon</b> using <b>Blowfish</b> for both IKE and ESP
|
||||
encryption. Upon the successful establishment of the IPsec tunnels, <b>leftfirewall=yes</b>
|
||||
automatically inserts iptables-based firewall rules that let pass the tunneled traffic.
|
||||
In order to test both tunnel and firewall, both <b>carol</b> and <b>dave</b> ping
|
||||
the client <b>alice</b> behind the gateway <b>moon</b>.
|
|
@ -1,15 +0,0 @@
|
|||
carol::ipsec status 2> /dev/null::home.*ESTABLISHED.*carol@strongswan.org.*moon.strongswan.org::YES
|
||||
dave:: ipsec status 2> /dev/null::home.*ESTABLISHED.*dave@strongswan.org.*moon.strongswan.org::YES
|
||||
moon::ipsec status::rw.*STATE_QUICK_R2.*IPsec SA established::YES
|
||||
carol::ipsec statusall 2> /dev/null::IKE proposal: BLOWFISH_CBC_256/HMAC_SHA2_512_256::YES
|
||||
dave:: ipsec statusall 2> /dev/null::IKE proposal: BLOWFISH_CBC_128/HMAC_SHA2_256_128::YES
|
||||
carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
|
||||
dave:: ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
|
||||
carol::ipsec statusall 2> /dev/null::BLOWFISH_CBC_192/HMAC_SHA2_384_192,::YES
|
||||
dave:: ipsec statusall 2> /dev/null::BLOWFISH_CBC_128/HMAC_SHA2_256_128,::YES
|
||||
carol::ip -s xfrm state::enc cbc(blowfish).*(192 bits)::YES
|
||||
dave:: ip -s xfrm state::enc cbc(blowfish).*(128 bits)::YES
|
||||
moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 192::YES
|
||||
moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 192::YES
|
||||
moon::tcpdump::IP dave.strongswan.org > moon.strongswan.org: ESP.*length 184::YES
|
||||
moon::tcpdump::IP moon.strongswan.org > dave.strongswan.org: ESP.*length 184::YES
|
|
@ -1,24 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutostart=no
|
||||
charondebug="cfg 2"
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=blowfish256-sha512-modp2048!
|
||||
esp=blowfish192-sha384!
|
||||
|
||||
conn home
|
||||
left=PH_IP_CAROL
|
||||
leftcert=carolCert.pem
|
||||
leftid=carol@strongswan.org
|
||||
leftfirewall=yes
|
||||
right=PH_IP_MOON
|
||||
rightid=@moon.strongswan.org
|
||||
rightsubnet=10.1.0.0/16
|
||||
auto=add
|
|
@ -1,6 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
charon {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
load = aes des blowfish md5 sha1 sha2 pem pkcs1 gmp curl random nonce x509 revocation hmac stroke kernel-netlink socket-default updown
|
||||
}
|
|
@ -1,23 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutostart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=blowfish128-sha256-modp1536!
|
||||
esp=blowfish128-sha256!
|
||||
|
||||
conn home
|
||||
left=PH_IP_DAVE
|
||||
leftcert=daveCert.pem
|
||||
leftid=dave@strongswan.org
|
||||
leftfirewall=yes
|
||||
right=PH_IP_MOON
|
||||
rightid=@moon.strongswan.org
|
||||
rightsubnet=10.1.0.0/16
|
||||
auto=add
|
|
@ -1,6 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
charon {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
load = aes des blowfish md5 sha1 sha2 pem pkcs1 gmp curl random nonce x509 revocation hmac stroke kernel-netlink socket-default updown
|
||||
}
|
|
@ -1,26 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutodebug="control crypt"
|
||||
crlcheckinterval=180
|
||||
strictcrlpolicy=no
|
||||
charonstart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
ike=blowfish256-sha512-modp2048,blowfish128-sha256-modp1536!
|
||||
esp=blowfish192-sha384,blowfish128-sha256!
|
||||
pfs=no
|
||||
|
||||
conn rw
|
||||
left=PH_IP_MOON
|
||||
leftcert=moonCert.pem
|
||||
leftid=@moon.strongswan.org
|
||||
leftsubnet=10.1.0.0/16
|
||||
leftfirewall=yes
|
||||
right=%any
|
||||
auto=add
|
|
@ -1,11 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
pluto {
|
||||
load = sha1 sha2 md5 aes des blowfish hmac pem pkcs1 x509 gmp random nonce curl kernel-netlink
|
||||
}
|
||||
|
||||
# pluto uses optimized DH exponent sizes (RFC 3526)
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,6 +0,0 @@
|
|||
moon::ipsec stop
|
||||
carol::ipsec stop
|
||||
dave::ipsec stop
|
||||
moon::/etc/init.d/iptables stop 2> /dev/null
|
||||
carol::/etc/init.d/iptables stop 2> /dev/null
|
||||
dave::/etc/init.d/iptables stop 2> /dev/null
|
|
@ -1,9 +0,0 @@
|
|||
moon::/etc/init.d/iptables start 2> /dev/null
|
||||
carol::/etc/init.d/iptables start 2> /dev/null
|
||||
dave::/etc/init.d/iptables start 2> /dev/null
|
||||
moon::ipsec start
|
||||
carol::ipsec start
|
||||
dave::ipsec start
|
||||
carol::sleep 1
|
||||
carol::ipsec up home
|
||||
dave::ipsec up home
|
|
@ -1,21 +0,0 @@
|
|||
#!/bin/bash
|
||||
#
|
||||
# This configuration file provides information on the
|
||||
# UML instances used for this test
|
||||
|
||||
# All UML instances that are required for this test
|
||||
#
|
||||
UMLHOSTS="alice moon carol winnetou dave"
|
||||
|
||||
# Corresponding block diagram
|
||||
#
|
||||
DIAGRAM="a-m-c-w-d.png"
|
||||
|
||||
# UML instances on which tcpdump is to be started
|
||||
#
|
||||
TCPDUMPHOSTS="moon"
|
||||
|
||||
# UML instances on which IPsec is started
|
||||
# Used for IPsec logging purposes
|
||||
#
|
||||
IPSECHOSTS="moon carol dave"
|
|
@ -1,3 +0,0 @@
|
|||
This scenario enables IPCOMP compression between roadwarrior <b>carol</b> and
|
||||
gateway <b>moon</b>. Two pings from <b>carol</b> to <b>alice</b> checks
|
||||
the established tunnel with compression.
|
|
@ -1,9 +0,0 @@
|
|||
carol::ipsec status 2> /dev/null::home.*ESTABLISHED.*carol@strongswan.org.*moon.strongswan.org::YES
|
||||
moon:: ipsec status 2> /dev/null::rw.*STATE_QUICK_R2.*IPsec SA established::YES
|
||||
carol::ipsec status 2> /dev/null::home.*INSTALLED, TUNNEL.*IPCOMP::YES
|
||||
moon:: ipsec statusall 2> /dev/null::policy.*COMPRESS::YES
|
||||
moon:: ip xfrm state::proto comp spi::YES
|
||||
carol::ip xfrm state::proto comp spi::YES
|
||||
carol::ping -n -c 2 -s 8184 -p deadbeef PH_IP_ALICE::8192 bytes from PH_IP_ALICE::YES
|
||||
moon::tcpdump::carol.strongswan.org > moon.strongswan.org: ESP::YES
|
||||
moon::tcpdump::moon.strongswan.org > carol.strongswan.org: ESP::YES
|
|
@ -1,21 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutostart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
compress=yes
|
||||
|
||||
conn home
|
||||
left=PH_IP_CAROL
|
||||
leftcert=carolCert.pem
|
||||
leftid=carol@strongswan.org
|
||||
right=PH_IP_MOON
|
||||
rightsubnet=10.1.0.0/16
|
||||
rightid=@moon.strongswan.org
|
||||
auto=add
|
|
@ -1,5 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
charon {
|
||||
load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac xcbc stroke kernel-netlink socket-default
|
||||
}
|
|
@ -1,25 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutodebug="control"
|
||||
crlcheckinterval=180
|
||||
strictcrlpolicy=no
|
||||
charonstart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
compress=yes
|
||||
pfs=no
|
||||
|
||||
conn rw
|
||||
left=PH_IP_MOON
|
||||
leftcert=moonCert.pem
|
||||
leftid=@moon.strongswan.org
|
||||
leftsubnet=10.1.0.0/16
|
||||
right=%any
|
||||
rightid=carol@strongswan.org
|
||||
auto=add
|
|
@ -1,2 +0,0 @@
|
|||
moon::ipsec stop
|
||||
carol::ipsec stop
|
|
@ -1,5 +0,0 @@
|
|||
moon::echo 1 > /proc/sys/net/ipv4/ip_forward
|
||||
carol::ipsec start
|
||||
moon::ipsec start
|
||||
carol::sleep 2
|
||||
carol::ipsec up home
|
|
@ -1,22 +0,0 @@
|
|||
#!/bin/bash
|
||||
#
|
||||
# This configuration file provides information on the
|
||||
# UML instances used for this test
|
||||
|
||||
# All UML instances that are required for this test
|
||||
#
|
||||
UMLHOSTS="alice moon carol winnetou"
|
||||
|
||||
# Corresponding block diagram
|
||||
#
|
||||
DIAGRAM="a-m-c-w.png"
|
||||
|
||||
# UML instances on which tcpdump is to be started
|
||||
#
|
||||
TCPDUMPHOSTS="moon"
|
||||
|
||||
# UML instances on which IPsec is started
|
||||
# Used for IPsec logging purposes
|
||||
#
|
||||
IPSECHOSTS="moon carol"
|
||||
|
|
@ -1,7 +0,0 @@
|
|||
The roadwarriors <b>carol</b> and <b>dave</b> set up a connection each to gateway <b>moon</b>.
|
||||
Both <b>carol</b> and <b>dave</b> request a <b>virtual IP</b> via the IKE Mode Config protocol
|
||||
by using the <b>leftsourceip=%config</b> parameter. <b>leftfirewall=yes</b> automatically
|
||||
inserts iptables-based firewall rules that let pass the tunneled traffic. In order to test the
|
||||
tunnels, <b>carol</b> and <b>dave</b> then ping the client <b>alice</b> behind the gateway
|
||||
<b>moon</b>. The source IP addresses of the two pings will be the virtual IPs <b>carol1</b>
|
||||
and <b>dave1</b>, respectively.
|
|
@ -1,26 +0,0 @@
|
|||
carol::ipsec status 2> /dev/null::home.*ESTABLISHED.*carol@strongswan.org.*moon.strongswan.org::YES
|
||||
carol::ipsec status 2> /dev/null::home.*INSTALLED, TUNNEL::YES
|
||||
carol::cat /var/log/daemon.log::installing new virtual IP PH_IP_CAROL1::YES
|
||||
carol::ip addr list dev eth0::PH_IP_CAROL1::YES
|
||||
carol::ip route list table 220::10.1.0.0/16.*src PH_IP_CAROL1::YES
|
||||
carol::cat /etc/resolv.conf::nameserver PH_IP_WINNETOU .*from moon.strongswan.org::YES
|
||||
carol::cat /etc/resolv.conf::nameserver PH_IP_VENUS .*from moon.strongswan.org::YES
|
||||
carol::ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
|
||||
dave:: ipsec status 2> /dev/null::home.*ESTABLISHED.*dave@strongswan.org.*moon.strongswan.org::YES
|
||||
dave:: ipsec status 2> /dev/null::home.*INSTALLED, TUNNEL::YES
|
||||
dave:: cat /var/log/daemon.log::installing new virtual IP PH_IP_DAVE1::YES
|
||||
dave:: ip addr list dev eth0::PH_IP_DAVE1::YES
|
||||
dave:: ip route list table 220::10.1.0.0/16.*src PH_IP_DAVE1::YES
|
||||
dave:: ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
|
||||
moon:: ipsec status 2> /dev/null::rw-carol.*STATE_MODE_CFG_R1.*sent ModeCfg reply, established::YES
|
||||
moon:: ipsec status 2> /dev/null::rw-dave.*STATE_MODE_CFG_R1.*sent ModeCfg reply, established::YES
|
||||
moon:: ipsec status 2> /dev/null::rw-carol.*STATE_QUICK_R2.*IPsec SA established::YES
|
||||
moon:: ipsec status 2> /dev/null::rw-dave.*STATE_QUICK_R2.*IPsec SA established::YES
|
||||
moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP::YES
|
||||
moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP::YES
|
||||
moon::tcpdump::IP dave.strongswan.org > moon.strongswan.org: ESP::YES
|
||||
moon::tcpdump::IP moon.strongswan.org > dave.strongswan.org: ESP::YES
|
||||
alice::tcpdump::IP carol1.strongswan.org > alice.strongswan.org: ICMP echo request::YES
|
||||
alice::tcpdump::IP alice.strongswan.org > carol1.strongswan.org: ICMP echo reply::YES
|
||||
alice::tcpdump::IP dave1.strongswan.org > alice.strongswan.org: ICMP echo request::YES
|
||||
alice::tcpdump::IP alice.strongswan.org > dave1.strongswan.org: ICMP echo reply::YES
|
|
@ -1,22 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutostart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
|
||||
conn home
|
||||
left=PH_IP_CAROL
|
||||
leftsourceip=%config
|
||||
leftcert=carolCert.pem
|
||||
leftid=carol@strongswan.org
|
||||
leftfirewall=yes
|
||||
right=PH_IP_MOON
|
||||
rightsubnet=10.1.0.0/16
|
||||
rightid=@moon.strongswan.org
|
||||
auto=add
|
|
@ -1,5 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
charon {
|
||||
load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac stroke kernel-netlink socket-default updown resolve
|
||||
}
|
|
@ -1,22 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutostart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
|
||||
conn home
|
||||
left=PH_IP_DAVE
|
||||
leftsourceip=%config
|
||||
leftcert=daveCert.pem
|
||||
leftid=dave@strongswan.org
|
||||
leftfirewall=yes
|
||||
right=PH_IP_MOON
|
||||
rightsubnet=10.1.0.0/16
|
||||
rightid=@moon.strongswan.org
|
||||
auto=add
|
|
@ -1,5 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
charon {
|
||||
load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac stroke kernel-netlink socket-default updown resolve
|
||||
}
|
|
@ -1,33 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutodebug=control
|
||||
crlcheckinterval=180
|
||||
charonstart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
pfs=no
|
||||
rekey=no
|
||||
left=PH_IP_MOON
|
||||
leftsubnet=10.1.0.0/16
|
||||
leftsourceip=PH_IP_MOON1
|
||||
leftcert=moonCert.pem
|
||||
leftid=@moon.strongswan.org
|
||||
leftfirewall=yes
|
||||
|
||||
conn rw-carol
|
||||
right=%any
|
||||
rightid=carol@strongswan.org
|
||||
rightsourceip=PH_IP_CAROL1
|
||||
auto=add
|
||||
|
||||
conn rw-dave
|
||||
right=%any
|
||||
rightid=dave@strongswan.org
|
||||
rightsourceip=PH_IP_DAVE1
|
||||
auto=add
|
|
@ -1,13 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
pluto {
|
||||
load = sha1 sha2 md5 aes des hmac pem pkcs1 x509 gmp random nonce curl attr kernel-netlink
|
||||
dns1 = PH_IP_WINNETOU
|
||||
dns2 = PH_IP_VENUS
|
||||
}
|
||||
|
||||
# pluto uses optimized DH exponent sizes (RFC 3526)
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,6 +0,0 @@
|
|||
moon::ipsec stop
|
||||
carol::ipsec stop
|
||||
dave::ipsec stop
|
||||
moon::/etc/init.d/iptables stop 2> /dev/null
|
||||
carol::/etc/init.d/iptables stop 2> /dev/null
|
||||
dave::/etc/init.d/iptables stop 2> /dev/null
|
|
@ -1,10 +0,0 @@
|
|||
moon::/etc/init.d/iptables start 2> /dev/null
|
||||
carol::/etc/init.d/iptables start 2> /dev/null
|
||||
dave::/etc/init.d/iptables start 2> /dev/null
|
||||
carol::ipsec start
|
||||
dave::ipsec start
|
||||
moon::ipsec start
|
||||
carol::sleep 2
|
||||
carol::ipsec up home
|
||||
dave::ipsec up home
|
||||
carol::sleep 1
|
|
@ -1,21 +0,0 @@
|
|||
#!/bin/bash
|
||||
#
|
||||
# This configuration file provides information on the
|
||||
# UML instances used for this test
|
||||
|
||||
# All UML instances that are required for this test
|
||||
#
|
||||
UMLHOSTS="alice moon carol winnetou dave"
|
||||
|
||||
# Corresponding block diagram
|
||||
#
|
||||
DIAGRAM="a-m-c-w-d.png"
|
||||
|
||||
# UML instances on which tcpdump is to be started
|
||||
#
|
||||
TCPDUMPHOSTS="moon alice"
|
||||
|
||||
# UML instances on which IPsec is started
|
||||
# Used for IPsec logging purposes
|
||||
#
|
||||
IPSECHOSTS="moon carol dave"
|
|
@ -1,5 +0,0 @@
|
|||
The roadwarriors <b>alice</b> and <b>venus</b> sitting behind the NAT router <b>moon</b> set up
|
||||
tunnels to gateway <b>sun</b>. UDP encapsulation is used to traverse the NAT router.
|
||||
<b>leftfirewall=yes</b> automatically inserts iptables-based firewall rules that let pass
|
||||
the tunneled traffic. In order to test the tunnel, the NAT-ed hosts <b>alice</b> and <b>venus</b>
|
||||
ping the client <b>bob</b> behind the gateway <b>sun</b>.
|
|
@ -1,18 +0,0 @@
|
|||
alice::ipsec status 2> /dev/null::nat-t.*ESTABLISHED.*alice@strongswan.org.*sun.strongswan.org::YES
|
||||
venus::ipsec status 2> /dev/null::nat-t.*ESTABLISHED.*venus.strongswan.org.*sun.strongswan.org::YES
|
||||
sun:: ipsec status 2> /dev/null::nat-t.*STATE_MAIN_R3.*ISAKMP SA established::YES
|
||||
sun:: ipsec status 2> /dev/null::nat-t.*sun.strongswan.org.*alice@strongswan.org::YES
|
||||
sun:: ipsec status 2> /dev/null::nat-t.*sun.strongswan.org.*venus.strongswan.org::YES
|
||||
alice::ipsec status 2> /dev/null::nat-t.*INSTALLED, TUNNEL, ESP in UDP::YES
|
||||
venus::ipsec status 2> /dev/null::nat-t.*INSTALLED, TUNNEL, ESP in UDP::YES
|
||||
sun:: ipsec status 2> /dev/null::nat-t.*STATE_QUICK_R2.*IPsec SA established::YES
|
||||
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_seq=1::YES
|
||||
venus::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_seq=1::YES
|
||||
moon:: sleep 6::no output expected::NO
|
||||
bob:: ping -c 1 PH_IP_ALICE::64 bytes from PH_IP_ALICE: icmp_seq=1::YES
|
||||
bob:: ping -c 1 PH_IP_VENUS::64 bytes from PH_IP_VENUS: icmp_seq=1::YES
|
||||
moon::tcpdump::IP moon.strongswan.org.* > sun.strongswan.org.ipsec-nat-t: UDP-encap: ESP::YES
|
||||
moon::tcpdump::IP sun.strongswan.org.ipsec-nat-t > moon.strongswan.org.*: UDP-encap: ESP::YES
|
||||
moon::tcpdump::IP moon.strongswan.org.* > sun.strongswan.org.ipsec-nat-t: isakmp-nat-keep-alive::YES
|
||||
alice::cat /var/log/daemon.log::sending keep alive::YES
|
||||
venus::cat /var/log/daemon.log::sending keep alive::YES
|
|
@ -1,21 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutostart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
|
||||
conn nat-t
|
||||
left=%any
|
||||
leftcert=aliceCert.pem
|
||||
leftid=alice@strongswan.org
|
||||
leftfirewall=yes
|
||||
right=PH_IP_SUN
|
||||
rightid=@sun.strongswan.org
|
||||
rightsubnet=10.2.0.0/16
|
||||
auto=add
|
|
@ -1,7 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
charon {
|
||||
load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac stroke kernel-netlink socket-default updown
|
||||
|
||||
keep_alive = 5
|
||||
}
|
|
@ -1,25 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutodebug=control
|
||||
crlcheckinterval=180
|
||||
nat_traversal=yes
|
||||
charonstart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
pfs=no
|
||||
|
||||
conn nat-t
|
||||
left=PH_IP_SUN
|
||||
leftcert=sunCert.pem
|
||||
leftid=@sun.strongswan.org
|
||||
leftfirewall=yes
|
||||
leftsubnet=10.2.0.0/16
|
||||
right=%any
|
||||
rightsubnetwithin=10.1.0.0/16
|
||||
auto=add
|
|
@ -1,11 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
pluto {
|
||||
load = sha1 sha2 md5 aes des hmac pem pkcs1 x509 gmp random nonce curl kernel-netlink
|
||||
}
|
||||
|
||||
# pluto uses optimized DH exponent sizes (RFC 3526)
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,21 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutostart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
|
||||
conn nat-t
|
||||
left=%any
|
||||
leftcert=venusCert.pem
|
||||
leftid=@venus.strongswan.org
|
||||
leftfirewall=yes
|
||||
right=PH_IP_SUN
|
||||
rightid=@sun.strongswan.org
|
||||
rightsubnet=10.2.0.0/16
|
||||
auto=add
|
|
@ -1,7 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
charon {
|
||||
load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac stroke kernel-netlink socket-default updown
|
||||
|
||||
keep_alive = 5
|
||||
}
|
|
@ -1,8 +0,0 @@
|
|||
sun::ipsec stop
|
||||
alice::ipsec stop
|
||||
venus::ipsec stop
|
||||
alice::/etc/init.d/iptables stop 2> /dev/null
|
||||
venus::/etc/init.d/iptables stop 2> /dev/null
|
||||
sun::/etc/init.d/iptables stop 2> /dev/null
|
||||
moon::iptables -t nat -F
|
||||
moon::conntrack -F
|
|
@ -1,14 +0,0 @@
|
|||
alice::/etc/init.d/iptables start 2> /dev/null
|
||||
venus::/etc/init.d/iptables start 2> /dev/null
|
||||
sun::/etc/init.d/iptables start 2> /dev/null
|
||||
moon::echo 1 > /proc/sys/net/ipv4/ip_forward
|
||||
moon::iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -p udp -j SNAT --to-source PH_IP_MOON:1024-1100
|
||||
moon::iptables -t nat -A POSTROUTING -o eth0 -s 10.1.0.0/16 -p tcp -j SNAT --to-source PH_IP_MOON:2000-2100
|
||||
alice::ipsec start
|
||||
venus::ipsec start
|
||||
sun::ipsec start
|
||||
alice::sleep 2
|
||||
alice::ipsec up nat-t
|
||||
venus::sleep 2
|
||||
venus::ipsec up nat-t
|
||||
venus::sleep 2
|
|
@ -1,21 +0,0 @@
|
|||
#!/bin/bash
|
||||
#
|
||||
# This configuration file provides information on the
|
||||
# UML instances used for this test
|
||||
|
||||
# All UML instances that are required for this test
|
||||
#
|
||||
UMLHOSTS="alice venus moon winnetou sun bob"
|
||||
|
||||
# Corresponding block diagram
|
||||
#
|
||||
DIAGRAM="a-v-m-w-s-b.png"
|
||||
|
||||
# UML instances on which tcpdump is to be started
|
||||
#
|
||||
TCPDUMPHOSTS="moon"
|
||||
|
||||
# UML instances on which IPsec is started
|
||||
# Used for IPsec logging purposes
|
||||
#
|
||||
IPSECHOSTS="alice venus sun"
|
|
@ -1,6 +0,0 @@
|
|||
A connection between the subnets behind the gateways <b>moon</b> and <b>sun</b> is set up.
|
||||
The authentication is based on <b>X.509 certificates</b>. Upon the successful
|
||||
establishment of the IPsec tunnel, <b>leftfirewall=yes</b> automatically
|
||||
inserts iptables-based firewall rules that let pass the tunneled traffic.
|
||||
In order to test both tunnel and firewall, client <b>alice</b> behind gateway <b>moon</b>
|
||||
pings client <b>bob</b> located behind gateway <b>sun</b>.
|
|
@ -1,7 +0,0 @@
|
|||
moon::ipsec status 2> /dev/null::net-net.*ESTABLISHED.*moon.strongswan.org.*sun.strongswan.org::YES
|
||||
sun:: ipsec status 2> /dev/null::net-net.*STATE_MAIN_R3.*sent MR3, ISAKMP SA established::YES
|
||||
moon::ipsec status 2> /dev/null::net-net.*INSTALLED, TUNNEL::YES
|
||||
sun:: ipsec status 2> /dev/null::net-net.*STATE_QUICK_R2.*IPsec SA established::YES
|
||||
alice::ping -c 1 PH_IP_BOB::64 bytes from PH_IP_BOB: icmp_seq=1::YES
|
||||
sun::tcpdump::IP moon.strongswan.org > sun.strongswan.org: ESP::YES
|
||||
sun::tcpdump::IP sun.strongswan.org > moon.strongswan.org: ESP::YES
|
|
@ -1,22 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
plutostart=no
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
|
||||
conn net-net
|
||||
left=PH_IP_MOON
|
||||
leftcert=moonCert.pem
|
||||
leftid=@moon.strongswan.org
|
||||
leftsubnet=10.1.0.0/16
|
||||
leftfirewall=yes
|
||||
right=PH_IP_SUN
|
||||
rightid=@sun.strongswan.org
|
||||
rightsubnet=10.2.0.0/16
|
||||
auto=add
|
|
@ -1,9 +0,0 @@
|
|||
# /etc/strongswan.conf - strongSwan configuration file
|
||||
|
||||
charon {
|
||||
load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random nonce x509 revocation hmac stroke kernel-netlink socket-default updown
|
||||
}
|
||||
|
||||
libstrongswan {
|
||||
dh_exponent_ansi_x9_42 = no
|
||||
}
|
|
@ -1,25 +0,0 @@
|
|||
# /etc/ipsec.conf - strongSwan IPsec configuration file
|
||||
|
||||
config setup
|
||||
charonstart=no
|
||||
plutodebug=control
|
||||
crlcheckinterval=180
|
||||
|
||||
conn %default
|
||||
ikelifetime=60m
|
||||
keylife=20m
|
||||
rekeymargin=3m
|
||||
keyingtries=1
|
||||
keyexchange=ikev1
|
||||
pfs=no
|
||||
|
||||
conn net-net
|
||||
left=PH_IP_SUN
|
||||
leftcert=sunCert.pem
|
||||
leftid=@sun.strongswan.org
|
||||
leftsubnet=10.2.0.0/16
|
||||
leftfirewall=yes
|
||||
right=PH_IP_MOON
|
||||
rightid=@moon.strongswan.org
|
||||
rightsubnet=10.1.0.0/16
|
||||
auto=add
|
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue