strongswan/src/charon/config/peer_cfg.h

426 lines
12 KiB
C
Raw Normal View History

/**
* @file peer_cfg.h
*
* @brief Interface of peer_cfg_t.
*
*/
/*
* Copyright (C) 2007 Tobias Brunner
* Copyright (C) 2005-2007 Martin Willi
* Copyright (C) 2005 Jan Hutter
* Hochschule fuer Technik Rapperswil
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
#ifndef PEER_CFG_H_
#define PEER_CFG_H_
typedef enum dpd_action_t dpd_action_t;
typedef enum cert_policy_t cert_policy_t;
typedef struct peer_cfg_t peer_cfg_t;
#include <library.h>
#include <utils/identification.h>
#include <utils/linked_list.h>
#include <config/traffic_selector.h>
#include <config/proposal.h>
#include <config/ike_cfg.h>
#include <config/child_cfg.h>
#include <sa/authenticators/authenticator.h>
#include <sa/authenticators/eap/eap_method.h>
/**
* Certificate sending policy. This is also used for certificate
* requests when using this definition for the other peer. If
* it is CERT_NEVER_SEND, a certreq is omitted, otherwise its
* included.
*
* @ingroup config
*
* @warning These definitions must be the same as in pluto/starter,
* as they are sent over the stroke socket.
*/
enum cert_policy_t {
/** always send certificates, even when not requested */
CERT_ALWAYS_SEND = 0,
/** send certificate upon cert request */
CERT_SEND_IF_ASKED = 1,
/** never send a certificate, even when requested */
CERT_NEVER_SEND = 2,
};
/**
* enum strings for cert_policy_t
*
* @ingroup config
*/
extern enum_name_t *cert_policy_names;
/**
* @brief Actions to take when a peer does not respond (dead peer detected).
*
* These values are the same as in pluto/starter, so do not modify them!
*
* @ingroup config
*/
enum dpd_action_t {
/** DPD disabled */
DPD_NONE,
/** remove CHILD_SAs without replacement */
DPD_CLEAR,
/** route the CHILD_SAs to resetup when needed */
DPD_ROUTE,
/** restart CHILD_SAs in a new IKE_SA, immediately */
DPD_RESTART,
};
/**
* enum names for dpd_action_t.
*/
extern enum_name_t *dpd_action_names;
/**
* @brief Configuration of a peer, specified by IDs.
*
* The peer config defines a connection between two given IDs. It contains
* exactly one ike_cfg_t, which is use for initiation. Additionally, it contains
* multiple child_cfg_t defining which CHILD_SAs are allowed for this peer.
* @verbatim
+-------------------+ +---------------+
+---------------+ | peer_cfg | +---------------+ |
| ike_cfg | +-------------------+ | child_cfg | |
+---------------+ | - ids | +---------------+ |
| - hosts | 1 1 | - cas | 1 n | - proposals | |
| - proposals |<------| - auth info |-------->| - traffic sel | |
| - ... | | - dpd config | | - ... |-+
+---------------+ | - ... | +---------------+
+-------------------+
@endverbatim
*
* @b Constructors:
* - peer_cfg_create()
*
* @ingroup config
*/
struct peer_cfg_t {
/**
* @brief Get the name of the peer_cfg.
*
* Returned object is not getting cloned.
*
* @param this calling object
* @return peer_cfg's name
*/
char* (*get_name) (peer_cfg_t *this);
/**
* @brief Get the IKE version to use for initiating.
*
* @param this calling object
* @return IKE major version
*/
u_int (*get_ike_version)(peer_cfg_t *this);
/**
* @brief Get the IKE config to use for initiaton.
*
* @param this calling object
* @return the IKE config to use
*/
ike_cfg_t* (*get_ike_cfg) (peer_cfg_t *this);
/**
* @brief Attach a CHILD config.
*
* @param this calling object
* @param child_cfg CHILD config to add
*/
void (*add_child_cfg) (peer_cfg_t *this, child_cfg_t *child_cfg);
/**
* @brief Create an iterator for all attached CHILD configs.
*
* @param this calling object
* @return an iterator over all CHILD configs.
*/
iterator_t* (*create_child_cfg_iterator) (peer_cfg_t *this);
/**
* @brief Select a CHILD config from traffic selectors.
*
* @param this calling object
* @param my_ts TS for local side
* @param other_ts TS for remote side
* @param my_host host to narrow down dynamic TS for local side
* @param other_host host to narrow down dynamic TS for remote side
* @return selected CHILD config, or NULL if no match found
*/
child_cfg_t* (*select_child_cfg) (peer_cfg_t *this, linked_list_t *my_ts,
linked_list_t *other_ts, host_t *my_host,
host_t *other_host);
/**
* @brief Get own ID.
*
* @param this calling object
* @return own id
*/
identification_t* (*get_my_id)(peer_cfg_t *this);
/**
* @brief Get peers ID.
*
* @param this calling object
* @return other id
*/
identification_t* (*get_other_id)(peer_cfg_t *this);
/**
* @brief Get own CA.
*
* @param this calling object
* @return own ca
*/
identification_t* (*get_my_ca)(peer_cfg_t *this);
/**
* @brief Get peer CA.
*
* @param this calling object
* @return other ca
*/
identification_t* (*get_other_ca)(peer_cfg_t *this);
/**
* @brief Get list of group attributes.
*
* @param this calling object
* @return linked list of group attributes
*/
linked_list_t* (*get_groups)(peer_cfg_t *this);
/**
* @brief Should be sent a certificate for this connection?
*
* @param this calling object
* @return certificate sending policy
*/
cert_policy_t (*get_cert_policy) (peer_cfg_t *this);
/**
* @brief Get the authentication method to use to authenticate us.
*
* @param this calling object
* @return authentication method
*/
auth_method_t (*get_auth_method) (peer_cfg_t *this);
/**
* @brief Get the EAP type to use for peer authentication.
*
* @param this calling object
* @return authentication method
*/
eap_type_t (*get_eap_type) (peer_cfg_t *this);
/**
* @brief Get the max number of retries after timeout.
*
* @param this calling object
* @return max number retries
*/
u_int32_t (*get_keyingtries) (peer_cfg_t *this);
/**
* @brief Get the lifetime of a IKE_SA.
*
* If "rekey" is set to TRUE, a lifetime is returned before the first
* rekeying should be started. If it is FALSE, the actual lifetime is
* returned when the IKE_SA must be deleted.
* The rekey time automatically contains a jitter to avoid simlutaneous
* rekeying.
*
* @param this child_config
* @param rekey TRUE to get rekey time
* @return lifetime in seconds
*/
u_int32_t (*get_lifetime) (peer_cfg_t *this, bool rekey);
/**
* @brief Should a full reauthentication be done instead of rekeying?
*
* @param this calling object
* @return TRUE to use full reauthentication
*/
bool (*use_reauth) (peer_cfg_t *this);
/**
* @brief Use MOBIKE (RFC4555) if peer supports it?
*
* @param this calling object
* @return TRUE to enable MOBIKE support
*/
bool (*use_mobike) (peer_cfg_t *this);
/**
* @brief Get the DPD check interval.
*
* @param this calling object
* @return dpd_delay in seconds
*/
u_int32_t (*get_dpd_delay) (peer_cfg_t *this);
/**
* @brief What should be done with a CHILD_SA, when other peer does not respond.
*
* @param this calling object
* @return dpd action
*/
dpd_action_t (*get_dpd_action) (peer_cfg_t *this);
/**
* @brief Get a virtual IP for the local peer.
*
* If no virtual IP should be used, NULL is returned. %any means to request
* a virtual IP using configuration payloads. A specific address is also
* used for a request and may be changed by the server.
*
* @param this peer_cfg
* @param suggestion NULL, %any or specific
* @return clone of an IP, %any or NULL
*/
host_t* (*get_my_virtual_ip) (peer_cfg_t *this);
/**
* @brief Get a virtual IP for the remote peer.
*
* An IP may be supplied, if one was requested by the initiator. However,
* the suggestion is not more as it says, any address may be returned, even
* NULL to not use virtual IPs.
*
* @param this peer_cfg
* @param suggestion NULL, %any or specific
* @return clone of an IP to use
*/
host_t* (*get_other_virtual_ip) (peer_cfg_t *this, host_t *suggestion);
#ifdef P2P
/**
* @brief Is this a mediation connection?
*
* @param this peer_cfg
* @return TRUE, if this is a mediation connection
*/
bool (*is_mediation) (peer_cfg_t *this);
/**
* @brief Get peer_cfg of the connection this one is mediated through.
*
* @param this peer_cfg
* @return reference to peer_cfg of the mediation connection
*/
peer_cfg_t* (*get_mediated_by) (peer_cfg_t *this);
/**
* @brief Get the id of the other peer at the mediation server.
*
* This is the leftid of the peer's connection with the mediation server.
*
* If it is not configured, it is assumed to be the same as the right id
* of this connection.
*
* @param this peer_cfg
* @return the id of the other peer
*/
identification_t* (*get_peer_id) (peer_cfg_t *this);
#endif /* P2P */
/**
* @brief Get a new reference.
*
* Get a new reference to this peer_cfg by increasing
* it's internal reference counter.
* Do not call get_ref or any other function until you
* already have a reference. Otherwise the object may get
* destroyed while calling get_ref(),
*
* @param this calling object
*/
void (*get_ref) (peer_cfg_t *this);
/**
* @brief Destroys the peer_cfg object.
*
* Decrements the internal reference counter and
* destroys the peer_cfg when it reaches zero.
*
* @param this calling object
*/
void (*destroy) (peer_cfg_t *this);
};
/**
* @brief Create a configuration object for IKE_AUTH and later.
*
* name-string gets cloned, ID's not.
* Virtual IPs are used if they are != NULL. A %any host means the virtual
* IP should be obtained from the other peer.
* Lifetimes are in seconds. To prevent to peers to start rekeying at the
* same time, a jitter may be specified. Rekeying of an SA starts at
* (rekeylifetime - random(0, jitter)).
*
* @param name name of the peer_cfg
* @param ike_version which IKE version we sould use for this peer
* @param ike_cfg IKE config to use when acting as initiator
* @param my_id identification_t for ourselves
* @param other_id identification_t for the remote guy
* @param my_ca CA to use for us
* @param other_ca CA to use for other
* @param groups list of group memberships
* @param cert_policy should we send a certificate payload?
* @param auth_method auth method to use to authenticate us
* @param eap_type EAP type to use for peer authentication
* @param keyingtries how many keying tries should be done before giving up
* @param lifetime lifetime before deleting an SA
* @param rekeytime lifetime before rekeying an SA
* @param jitter range of random to substract from rekeytime
* @param reauth sould be done reauthentication instead of rekeying?
* @param mobike use MOBIKE (RFC4555) if peer supports it
* @param dpd_delay after how many seconds of inactivity to check DPD
* @param dpd_action what to do with CHILD_SAs when detected a dead peer
* @param my_virtual_ip virtual IP for local host, or NULL
* @param other_virtual_ip virtual IP for remote host, or NULL
* @param p2p_mediation TRUE if this is a mediation connection
* @param p2p_mediated_by name of the mediation connection to mediate through
* @param peer_id ID that identifies our peer at the mediation server
* @return peer_cfg_t object
*
* @ingroup config
*/
peer_cfg_t *peer_cfg_create(char *name, u_int ikev_version, ike_cfg_t *ike_cfg,
identification_t *my_id, identification_t *other_id,
identification_t *my_ca, identification_t *other_ca,
linked_list_t *groups, cert_policy_t cert_policy,
auth_method_t auth_method, eap_type_t eap_type,
u_int32_t keyingtries, u_int32_t lifetime,
u_int32_t rekeytime, u_int32_t jitter,
bool reauth, bool mobike,
u_int32_t dpd_delay, dpd_action_t dpd_action,
host_t *my_virtual_ip, host_t *other_virtual_ip,
bool p2p_mediation, peer_cfg_t *p2p_mediated_by,
identification_t *peer_id);
#endif /* PEER_CFG_H_ */