35307a047a
make UE switch_on non-blocking
...
this allows a simpler main that just signals NAS to switch on the UE
but doesn't block until the action is completed.
For making sure the UE also attached if the first attempt failed
the NAS needs to be extended to support the correct timers.
2019-10-15 10:13:21 +02:00
80ef7f8497
changed the name of proc Error/Warning/Info logging macros
2019-10-14 15:18:15 +02:00
71ebac861c
fix nas proc logging, and reuse of cell selection result
2019-10-14 15:18:15 +02:00
81a466a641
since we moved cell search to the background thread, cell reselection prints a error message that it cannot start. In fact it already started. It is just waiting for the cell search to finish. This PR fixes this
2019-10-14 15:18:15 +02:00
e67f66e539
moved cell search completed signal from the background thread to the stack thread
2019-10-14 11:44:40 +02:00
0b00e6d94a
SRSUE: fixed CSI and HARQ collision for CA
2019-10-14 11:20:35 +02:00
743cce5503
SRSUE: Added end of burst when a out-of-sync is detected in PSS/SSS sync
2019-10-14 11:20:35 +02:00
a9dae4c29c
SRSUE: Enable Asynchronous SCell Receiver AGC
2019-10-14 11:20:35 +02:00
1d83bb08e2
Changes in ACK procedure to support CA. Tested 1 cell in SISO/MIMO
2019-10-14 11:20:35 +02:00
7a672ca340
fix typo
2019-10-14 10:51:05 +02:00
b1496317d5
fixed the pcch proc issue by letting the cell selection explicitly propagate its result to the pcch_process_proc
2019-10-11 15:22:32 +02:00
3a678b1e5f
fixed wrong SRS parameter logging
2019-10-09 16:06:21 +02:00
3c6ff0da30
make NAS logging less verbose
2019-10-09 11:53:27 +02:00
c5f52adfba
nas: fix issue in which NAS wouldn't allow to attach once it failed
...
the main issue was the plmn_selected variable. the solution
was to create a function to enter the deregistered state that resets the variable
and performs all other actions that need to be performed, like clearing
EPS bearers.
The patch also extends the SS to support AT commands to enable/disable
data services and now succesfully passes TC_9_2_2_1_7
2019-10-09 11:34:49 +02:00
2fb830fcfa
moved cell search to background task thread pool, and provided a stack interface to rrc to call "start_cell_search". Once completed, the background task signals back to RRC
2019-10-04 22:01:44 +02:00
0467d8bc84
rework neighbor cell handling
2019-10-04 16:25:02 +02:00
c7f0caa24a
add TTI field to MAC dl/ul grants and fix PCAP to include TTI
2019-10-02 16:49:46 +02:00
6db0e474be
moved RA waiting procedure to a background task of the stack thread pool
2019-10-02 11:04:47 +02:00
efdec15964
Renamed lock_guard (lg) to lock
2019-10-02 11:03:03 +02:00
665f899a74
Fixed some coverity and Clang tidy warnings
2019-10-02 11:03:03 +02:00
f94d2537a3
nas: send identity response integrity protected if security ctxt is present
2019-10-01 20:59:00 +02:00
bb84b27f0b
fix RRC connect proc in NAS to allow reattch after detach
2019-10-01 20:59:00 +02:00
cfadd1ba0b
use received count for NAS integrity check
...
using the local rx count has caused issues when our UE
missed one NAS message was therefore out-of-sync and then
dropped all following NAS messages due to integrity failure
the NAS spec clearly states that the UE should use the
count received as an input for the integrity check calculation
2019-10-01 20:59:00 +02:00
fc9bb3c934
removed rrc asn1 header include from the ue_interfaces and phy
2019-09-30 21:05:32 +02:00
ef26bc7451
SRSUE: fixed prach TA correction
2019-09-30 14:50:11 +02:00
0e6b0768fd
print PCCH hex when decoding fails
2019-09-25 12:51:43 +02:00
2f47010eb6
fix various uninitialized vars
2019-09-24 13:23:30 +02:00
0e89f72846
remove EPS bearer deletion when going RRC idle
...
when going RRC idle, NAS gets informed and currently
clears all registered EPS bearers. This is wrong because
the EPS can outlive a RRC session.
Also in the conformance tests it's clearly seen
that after a RRC release a dedicatated EPS bearer is
created with a linked EPS bearer ID that has been
created _before_ RRC went idle.
2019-09-22 14:57:20 +02:00
35f85c651c
SRSUE: Added SCell synchronizer and measurements based on reference signals
2019-09-20 16:20:31 +02:00
8e17aba5d8
Improved SSS decoding and improved scell_search_test
2019-09-20 16:20:31 +02:00
dedf0f2f78
Added initial time to delay channel simulator
2019-09-20 16:20:31 +02:00
54974d935e
SRSUE PHY: unitialised values and attributes clean-tidy up
2019-09-20 16:03:37 +02:00
78fcc11a30
Fixes minor unitialised/leaked memory
2019-09-20 16:03:37 +02:00
0984debe1b
Fix issues with RLF in B210 and X300 ( #669 )
...
* Calling tx_end() from radio_reset() causes long execution time in B210. Using boolean to call later instead. Fixes RLF failing in B210. Checked in X300
* Fix issue #655
2019-09-20 15:41:16 +02:00
946ead06e8
using an interface between the stack and lower mac to process demux pdus.
2019-09-19 10:19:46 +02:00
57317fab7c
expose debug_long to class log and use in RRC to log ASN1 structs
2019-09-18 16:12:24 +02:00
7dde4f3b8a
fix BCCH-BCH logging in RRC debug mode
...
also decode BCCH-BCH using ASN1 lib and write MIB to log
2019-09-18 16:12:24 +02:00
99a6d49e78
only write MIB to PCAP if cell search was successful
2019-09-18 16:12:24 +02:00
7e67aee839
resolved the uninit variable issue in the queue_test
2019-09-18 12:18:33 +02:00
14267640ee
implemented andre's PR review requests
2019-09-18 12:18:33 +02:00
11ec5cdba6
added a maximum capacity to the pending task multiqueue, so that the buffer pool does not get depleted
2019-09-18 12:18:33 +02:00
63457f195c
extented queue test
2019-09-18 12:18:33 +02:00
a2d7b2320a
placed GW packets in the same thread as UE stack thread
2019-09-18 12:18:33 +02:00
647c624423
created a multiqueue handler, and started using it for the ue stack
2019-09-18 12:18:33 +02:00
08ca9ebd4e
write BCH to PCAP
...
this patch moves the BCH payload buffer into the UE sync object and
therefore allows to pass it to the MAC for PCAP logging
2019-09-17 21:56:06 +02:00
a3932f9bea
Minor change to fix coverty issue
2019-09-17 14:22:38 +02:00
94667beb00
added a bound checker to bit_ref packer, and other fixes
2019-09-17 14:15:43 +02:00
6bb0790cf1
Fix coverty issues ( #652 )
2019-09-13 15:06:20 +02:00
bd1e367263
add missing mutex lock in mux
2019-09-12 09:51:03 +02:00
761fda542d
fix invalid neighbor cell addition
...
if phy measurements are received and processes before a serving cell
is selected, an invalid neighbor cell is added because the uninitlized
serving cell is used.
fix the issue by checking if the serving cell is valid
2019-09-12 09:51:03 +02:00
Andre Puschmann