pycrate/pycrate_asn1dir/3GPP_LI_33108/UmtsCS-HI2Operations.asn

255 lines
10 KiB
Groff

UmtsCS-HI2Operations
{itu-t (0) identified-organization (4) etsi (0) securityDomain (2) lawfulIntercept (2) threeGPP(4) hi2CS (3) r16 (16) version-0 (0)}
DEFINITIONS IMPLICIT TAGS ::=
BEGIN
IMPORTS
LawfulInterceptionIdentifier,
TimeStamp,
Intercepted-Call-State,
PartyInformation,
CallContentLinkCharacteristics,
CommunicationIdentifier,
CC-Link-Identifier,
National-Parameters,
National-HI2-ASN1parameters
FROM HI2Operations
{itu-t(0) identified-organization(4) etsi(0) securityDomain(2)
lawfulIntercept(2) hi2(1) version9(9)} -- Imported from TS 101 671 v2.13.1
Location,
SMS-report,
ExtendedLocParameters,
LocationErrorCode
FROM UmtsHI2Operations
{itu-t(0) identified-organization(4) etsi(0) securityDomain(2)
lawfulintercept(2) threeGPP(4) hi2(1) r16 (16) version-0(0)};
-- Object Identifier Definitions
-- Security DomainId
lawfulInterceptDomainId OBJECT IDENTIFIER ::= {itu-t(0) identified-organization(4) etsi(0)
securityDomain(2) lawfulIntercept(2)}
-- Security Subdomains
threeGPPSUBDomainId OBJECT IDENTIFIER ::= {lawfulInterceptDomainId threeGPP(4)}
hi2CSDomainId OBJECT IDENTIFIER ::= {threeGPPSUBDomainId hi2CS(3) r16 (16) version-0 (0)}
UmtsCS-IRIsContent ::= CHOICE
{
iRIContent UmtsCS-IRIContent,
iRISequence UmtsCS-IRISequence
}
UmtsCS-IRISequence ::= SEQUENCE OF UmtsCS-IRIContent
-- Aggregation of UmtsCS-IRIContent is an optional feature.
-- It may be applied in cases when at a given point in time several IRI records are
-- available for delivery to the same LEA destination.
-- As a general rule, records created at any event shall be sent immediately and shall
-- not held in the DF or MF in order to apply aggregation.
-- When aggregation is not to be applied, UmtsCS-IRIContent needs to be chosen.
UmtsCS-IRIContent ::= CHOICE
{
iRI-Begin-record [1] IRI-Parameters,
--at least one optional parameter has to be included within the iRI-Begin-Record
iRI-End-record [2] IRI-Parameters,
iRI-Continue-record [3] IRI-Parameters,
--at least one optional parameter has to be included within the iRI-Continue-Record
iRI-Report-record [4] IRI-Parameters,
--at least one optional parameter has to be included within the iRI-Report-Record
...
}
IRI-Parameters ::= SEQUENCE
{
hi2CSDomainId [0] OBJECT IDENTIFIER, -- 3GPP HI2 CS domain
iRIversion [23] ENUMERATED
{
version1(1),
...,
version2(2),
version3(3),
-- versions 4-7 were ommited to align with UmtsHI2Operations.
lastVersion(8)
} OPTIONAL,
-- Optional parameter "iRIversion" (tag 23) was always redundant in 33.108, because
-- the object identifier "hi2CSDomainId" was introduced into "IRI Parameters" with the
-- initial HI2 CS domain module in 33.108v6.1.0. In order to keep backward compatibility,
-- even when the version of the "hi2CSDomainId" parameter will be incremented it is
-- recommended to always send to LEMF the same: enumeration value "lastVersion(8)".
-- if not present, it means version 1 is handled
lawfulInterceptionIdentifier [1] LawfulInterceptionIdentifier,
-- This identifier is associated to the target.
communicationIdentifier [2] CommunicationIdentifier,
-- used to uniquely identify an intercepted call.
timeStamp [3] TimeStamp,
-- date and time of the event triggering the report.
intercepted-Call-Direct [4] ENUMERATED
{
not-Available(0),
originating-Target(1),
terminating-Target(2),
...
} OPTIONAL,
intercepted-Call-State [5] Intercepted-Call-State OPTIONAL,
-- Not required for UMTS. May be included for backwards compatibility to GSM
ringingDuration [6] OCTET STRING (SIZE (3)) OPTIONAL,
-- Duration in seconds. BCD coded : HHMMSS
-- Not required for UMTS. May be included for backwards compatibility to GSM
conversationDuration [7] OCTET STRING (SIZE (3)) OPTIONAL,
-- Duration in seconds. BCD coded : HHMMSS
-- Not required for UMTS. May be included for backwards compatibility to GSM
locationOfTheTarget [8] Location OPTIONAL,
-- location of the target
partyInformation [9] SET SIZE (1..10) OF PartyInformation OPTIONAL,
-- This parameter provides the concerned party (Originating, Terminating or forwarded
-- party), the identity(ies) of the party and all the information provided by the party.
callContentLinkInformation [10] SEQUENCE
{
cCLink1Characteristics [1] CallContentLinkCharacteristics OPTIONAL,
-- information concerning the Content of Communication Link Tx channel established
-- toward the LEMF (or the sum signal channel, in case of mono mode).
cCLink2Characteristics [2] CallContentLinkCharacteristics OPTIONAL,
-- information concerning the Content of Communication Link Rx channel established
-- toward the LEMF.
...
} OPTIONAL,
release-Reason-Of-Intercepted-Call [11] OCTET STRING (SIZE (2)) OPTIONAL,
-- Release cause coded in [31] format.
-- This parameter indicates the reason why the
-- intercepted call cannot be established or why the intercepted call has been
-- released after the active phase.
nature-Of-The-intercepted-call [12] ENUMERATED
{
--Not required for UMTS. May be included for backwards compatibility to GSM
--Nature of the intercepted "call":
gSM-ISDN-PSTN-circuit-call(0),
-- the possible UUS content is sent through the HI2 or HI3 "data" interface
-- the possible call content call is established through the HI3 "circuit" interface
gSM-SMS-Message(1),
-- the SMS content is sent through the HI2 or HI3 "data" interface
uUS4-Messages(2),
-- the UUS content is sent through the HI2 or HI3 "data" interface
tETRA-circuit-call(3),
-- the possible call content call is established through the HI3 "circuit" interface
-- the possible data are sent through the HI3 "data" interface
teTRA-Packet-Data(4),
-- the data are sent through the HI3 "data" interface
gPRS-Packet-Data(5),
-- the data are sent through the HI3 "data" interface
...
} OPTIONAL,
serviceCenterAddress [13] PartyInformation OPTIONAL,
-- e.g. in case of SMS message this parameter provides the address of the relevant
-- server within the calling (if server is originating) or called
-- (if server is terminating) party address parameters
sMS [14] SMS-report OPTIONAL,
-- this parameter provides the SMS content and associated information
cC-Link-Identifier [15] CC-Link-Identifier OPTIONAL,
-- Depending on a network option, this parameter may be used to identify a CC link
-- in case of multiparty calls.
national-Parameters [16] National-Parameters OPTIONAL,
...,
umts-Cs-Event [33] Umts-Cs-Event OPTIONAL,
-- Care should be taken to ensure additional parameter numbering does not conflict with
-- ETSI TS 101 671 or Annex B.3 of this document (PS HI2).
serving-System-Identifier [34] OCTET STRING OPTIONAL,
-- the serving network identifier PLMN id (MNC, Mobile Country Code and MNC, Mobile Network
-- Country, defined in E212 [87]) and 3GPP TR 21.905 [38].
carrierSpecificData [35] OCTET STRING OPTIONAL,
-- Copy of raw data specified by the CSP or his vendor related to HLR.
current-Previous-Systems [36] Current-Previous-Systems OPTIONAL,
change-Of-Target-Identity [37] Change-Of-Target-Identity OPTIONAL,
requesting-Network-Identifier [38] OCTET STRING OPTIONAL,
-- the requesting network identifier PLMN id (Mobile Country Code and Mobile Network Country,
-- defined in E212 [87]).
requesting-Node-Type [39] Requesting-Node-Type OPTIONAL,
extendedLocParameters [40] ExtendedLocParameters OPTIONAL, -- LALS extended parameters
locationErrorCode [41] LocationErrorCode OPTIONAL, -- LALS error code
national-HI2-ASN1parameters [255] National-HI2-ASN1parameters OPTIONAL
}
Umts-Cs-Event ::= ENUMERATED
{
call-establishment (1),
answer (2),
supplementary-Service (3),
handover (4),
release (5),
sMS (6),
location-update (7),
subscriber-Controlled-Input (8),
...,
hLR-Subscriber-Record-Change (9),
serving-System (10),
cancel-Location (11),
register-Location (12),
location-Information-Request (13)
}
Requesting-Node-Type ::= ENUMERATED
{
mSC (1),
sMS-Centre (2),
gMLC (3),
mME (4),
sGSN (5),
...
}
Change-Of-Target-Identity ::= SEQUENCE
{
new-MSISDN [1] PartyInformation OPTIONAL,
-- new MSISDN of the target, encoded in the same format as the AddressString
-- parameters defined in MAP format document TS 29.002 [4]
old-MSISDN [2] PartyInformation OPTIONAL,
-- new MSISDN of the target, encoded in the same format as the AddressString
-- parameters defined in MAP format document TS 29.002 [4]
new-IMSI [3] PartyInformation OPTIONAL,
-- See MAP format [4] International Mobile
-- Station Identity E.212 number beginning with Mobile Country Code
old-IMSI [4] PartyInformation OPTIONAL,
-- See MAP format [4] International Mobile
-- Station Identity E.212 number beginning with Mobile Country Code
...,
new-IMEI [5] PartyInformation OPTIONAL,
-- See MAP format [4] International Mobile
-- Equipement Identity defined in MAP format document TS 29.002 [4]
old-IMEI [6] PartyInformation OPTIONAL
-- See MAP format [4] International Mobile
-- Equipement Identity defined in MAP format document TS 29.002 [4]
}
Current-Previous-Systems ::= SEQUENCE
{
current-Serving-System-Identifier [1] OCTET STRING OPTIONAL,
-- VPLMN id (Mobile Country Code and Mobile Network Country, E. 212 number [87]).
current-Serving-MSC-Number [2] OCTET STRING OPTIONAL,
-- E.164 number of the serving MSC.
current-Serving-MSC-Address [3] OCTET STRING OPTIONAL,
-- The IP address of the serving MSC or its Diameter Origin-Host and Origin-Realm. previous-
previous-Serving-System-Identifier [4] OCTET STRING OPTIONAL,
-- VPLMN id (Mobile Country Code and Mobile Network Country, defined in E212 [87]).
previous-Serving-MSC-Number [5] OCTET STRING OPTIONAL,
-- The E.164 number of the previous serving MSC.
previous-Serving-MSC-Address [6] OCTET STRING OPTIONAL,
-- The IP address of the previous serving MSC or its Diameter Origin-Host and Origin-Realm.
...
}
END