166 lines
6.5 KiB
Plaintext
166 lines
6.5 KiB
Plaintext
# PBX options
|
|
#############
|
|
|
|
# Turn debugging all on=0xffff or off=0x0000 (default= 0x0000)
|
|
#define DEBUG_CONFIG 0x0001
|
|
#define DEBUG_MSG 0x0002
|
|
#define DEBUG_STACK 0x0004
|
|
#define DEBUG_BCHANNEL 0x0008
|
|
#define DEBUG_PORT 0x0100
|
|
#define DEBUG_ISDN 0x0110
|
|
#define DEBUG_H323 0x0120
|
|
#define DEBUG_VBOX 0x0180
|
|
#define DEBUG_EPOINT 0x0200
|
|
#define DEBUG_CALL 0x0400
|
|
#define DEBUG_CRYPT 0x1000
|
|
#define DEBUG_ROUTE 0x2000
|
|
#define DEBUG_IDLETIME 0x4000
|
|
#define DEBUG_LOG 0x7fff
|
|
|
|
#debug 0x0000
|
|
|
|
# The log file can be used to track actions by the PBX. Omit the parameter
|
|
# to turn off log file. By default, log file is located inside the directory
|
|
# "/usr/local/pbx/log".
|
|
#log /usr/local/pbx/log
|
|
|
|
# Use "alaw" (default) or "ulaw" samples.
|
|
#alaw
|
|
|
|
# The pbx should run as real time process. Because audio is streamed and
|
|
# ISDN protocol requires a certain response time, we must have high priority.
|
|
# By default, the process runs with realtime scheduling and high priority.
|
|
# To debug, it is whise to use "schedule" with no parameter to turn off
|
|
# realtime scheduling. In case of an endless loop bug, PBX4Linux will take
|
|
# all CPU time forever - your machine hangs.
|
|
#schedule 0
|
|
|
|
# Use tone sets (default= tones_american).
|
|
# This can be overridden by the extension setting
|
|
#tones_dir tones_american
|
|
|
|
# Fetch tone sets as specified here.
|
|
# The tone sets will be loaded during startup, and no harddisk access is
|
|
# required. Specify all tone sets seperated by komma.
|
|
# By default, no tone is fetched. Tone sets, that are not specified here, will
|
|
# be streamed from hard disk.
|
|
# Don't use spaces to seperate!
|
|
#fetch_tones tones_american,tones_german,vbox_english,vbox_german
|
|
|
|
# Extensions directory where all configuration files and messages for all
|
|
# extensions are stored (default= extensions).
|
|
#extensions_dir extensions
|
|
|
|
# Prefix to dial national call (default= 0).
|
|
# If you omit the prefix, all subscriber numbers are national numbers.
|
|
# (example: Danmark)
|
|
#national 0
|
|
|
|
# Prefix to dial international call (default= 00).
|
|
# If you omit the prefix, all subscriber numbers are international numbers.
|
|
#international 00
|
|
|
|
# On external calls, dialing can be done via normal called party number
|
|
# information element or via keypad facility. Some telephone systems require
|
|
# dialing via keypad to enable/disable special functions.
|
|
# By default keypad facility is disabled.
|
|
#keypad
|
|
|
|
# Internal/external ports (cards connected to your isdn line)
|
|
# MUST be the card number. Use "./pbx query" to list.
|
|
# Add "ptp" for using internal port as point-to-point. (Only required for NT mode ports.)
|
|
# Example: port 2
|
|
# port 3 ptp
|
|
port 2
|
|
port 3
|
|
|
|
# Specify the H323 endpoint name. If omitted the hostname is used.
|
|
#h323_name PBX4Linux
|
|
|
|
# Incoming H323 calls can be connected prior answer, because some clients will
|
|
# not play any inband tones during ringing, they just wait as nothing would
|
|
# happen.
|
|
# This only works for external calls. If a H323 caller is authenticated via
|
|
# h323_gateway.conf, a special "connect" option may be used to connect as
|
|
# soon as the call is received.
|
|
# By default this feature is turned off.
|
|
#h323_ringconnect
|
|
|
|
# Specify which codecs may be used for H323 calls
|
|
# "h323_law" ALaw and muLaw codec which requre more than 64k internet
|
|
# connection cause by overhead. The parameter defines the frame
|
|
# size. The size range is 10 - 240.
|
|
# "h323_g726" The adpcm codec G726. The parameter defines the bits per sample.
|
|
# The bits must be 2, 3, 4, or 5. (16, 24, 32, 40 kbits/s)
|
|
# The given value will always include all modes with lower value.
|
|
# "h323_gsm" GSM0610 and MicrosoftGSM codecs (not compatible with netmeeting)
|
|
# The prameter defines the frame size. The frame range is 1 - 7.
|
|
# "h323_lpc10" Codec with very low bandwith usage which can even be used on
|
|
# slow internetconnections like 9600 kBit (about 300 bytes/s)
|
|
# "h323_speex" Non standard Speex codec. The parameter defines the mode.
|
|
# The mode range is 2 - 6.
|
|
# The given value will always include all modes with lower value.
|
|
# "h323_xspeex" Non standard XiphSpeex codec. The parameter defines the mode.
|
|
# The mode range is 2 - 6.
|
|
# The given value will always include all modes with lower value.
|
|
# The priority of the codecs to use is given by it's order.
|
|
# By default, no codec is used
|
|
h323_gsm 4
|
|
h323_g726 2
|
|
#h323_lpc10
|
|
#h323_speex 4
|
|
#h323_xspeex 4
|
|
h323_law 64
|
|
|
|
# To allow incoming calls via H323, the following option is used:
|
|
# "h323_icall [<prefix>]"
|
|
# The given prefix is used for incoming calls which do not send any dialing
|
|
# information. If you like to route calls to an extension, give extension
|
|
# dialing as specified at numbering_ext.conf.
|
|
# By default no calls are accepted.
|
|
# Omit the prefix and it must be dialed by the caller.
|
|
h323_icall 0
|
|
|
|
# Specify the port to listen on incoming H323 connections.
|
|
# The default value is 1720.
|
|
#h323_port 1720
|
|
|
|
# To register with a gatekeeper, the following option is used:
|
|
# "h323_gatekeeper [<host or ip>]
|
|
# If no parameter is given, the gatekeeper is searched automatically.
|
|
#h323_gatekeeper
|
|
|
|
# To use dtmf detection for call from or to ISDN, uncomment the keyword "dtmf".
|
|
# By default dtmf detection is used. Note that dtmf detection needs cpu time.
|
|
# Dtmf detection is essential when handling the call after connect using
|
|
# keypad. (conferrence, callback, ect...)
|
|
#nodtmf
|
|
|
|
# For calls to external where caller id is not available, this id is used.
|
|
# It is sent of type "subscriber number". This ID is only usefull if the
|
|
# external line will not screen caller id. It will be sent anonymous.
|
|
# If you don't know what to use it for, you don't need it.
|
|
# Default is nothing.
|
|
#dummyid 0
|
|
|
|
# If your external ISDN line(s) support inband patterns prior call connect,
|
|
# you may say 'yes' here. In this case the PBX's tones are used for incoming
|
|
# calls. This may require a special subscription because it can be abused
|
|
# to transfer audio prior charge of call
|
|
#inbandpattern no
|
|
|
|
# Tones/announcements are streamed from user space. It is possible to use
|
|
# the module "mISDN_dsp.o" instead. It provides simple tones with much less cpu
|
|
# usage. If supported by special hardware, tones are loops that require no
|
|
# bus/cpu load at all, except when the tone changes.
|
|
# This works only for ISDN ports. It can be overridden by extension's tone set.
|
|
# Defautlt is streaming of tones. Use parameter "american", "german", or
|
|
# "oldgerman". "oldgerman" sounds like the old german telephone system (POTS).
|
|
#dsptones none
|
|
|
|
# Source email address of the PBX. E.g. it is used when sending a mail
|
|
# from the voice box. It is not the address the mails are sent to.
|
|
# Most mail servers require an existing domain in order to accept mails.
|
|
#email pbx@jolly.de
|
|
|