NCN8025 breakout v1
(C) 2021 Harald Welte
CC-BY-SA
NCN8025 breakout v1
(C) 2021 Harald Welte
CC-BY-SA
+
-
1
GND
IO
CLK
RST
VDD
PRS
<b>0603</b>
>NAME
>VALUE
<b>PCB Matrix Packages</b><p>
<b>PIN HEADER</b>
>NAME
>VALUE
<b>PIN HEADER</b>
>NAME
>VALUE
QFN-16 version by sysmocom
>NAME
>VALUE
<b>Pin Header Connectors</b><p>
<author>Created by librarian@cadsoft.de</author>
<b>PIN HEADER</b>
>NAME
>VALUE
>NAME
<p>
<b>Eurocircuits-EAGLE design rules</b><br>
<br>
Setup for <b>2-layer PatternClass6 BaseCopperO18 eCDefault</b>
<p>
The option <b>Sizes-Minimum Drill</b> is set to 0.35mm. This minimum drill endsize can be set lower if needed. Values below 0.25mm will result in a higher DrillClassification. For details see the Eurocircuits Classification overview.
<p>
<u>Extra Notes:</u><br>
- The option <b>Distance-Copper/Dimension</b> is set to 0.25mm, the default for boards with a routed boardoutline. If you require Vcut on your board this parameter should be set to 0.45mm.<br>
- The option <b>Supply-Generate thermals for vias</b> is on by default but may be changed if required.<br>
- The option <b>Mask-Stop</b> is set to 0mm oversize which is the preffered value.<br>
- The option <b>Mask-Cream</b> is set to 0mm oversize by default, but may be changed if required<br>
- The option <b>Mask-Limit</b> is set to 0.45mm, resulting in covered or tented via holes for vias of 0.45mm and smaller. The option may be changed if required.<br>
- The options <b>Shapes</b> and <b>Misc</b> are not relevant. Values for <b>Shapes-Smds-Roundness</b> are not critical and can be set as you require.
<p>
<p>
You can set higher minimum values if you wish, setting lower minimum values is <u>not advisable</u>.<br>
If you need lower minimum values, please use a different Eurocircuits-EAGLE design rule file. For details see the Eurocircuits-EAGLE dru overview table.
<p>
Your Eurocircuits Team
<p>
<b>Eurocircuits-EAGLE design rules</b><br>
<br>
Setup for <b>2-layer PatternClass6 BaseCopperO18 eCDefault</b>
<p>
The option <b>Sizes-Minimum Drill</b> is set to 0.35mm. This minimum drill endsize can be set lower if needed. Values below 0.25mm will result in a higher DrillClassification. For details see the Eurocircuits Classification overview.
<p>
<u>Extra Notes:</u><br>
- The option <b>Distance-Copper/Dimension</b> is set to 0.25mm, the default for boards with a routed boardoutline. If you require Vcut on your board this parameter should be set to 0.45mm.<br>
- The option <b>Supply-Generate thermals for vias</b> is on by default but may be changed if required.<br>
- The option <b>Mask-Stop</b> is set to 0mm oversize which is the preffered value.<br>
- The option <b>Mask-Cream</b> is set to 0mm oversize by default, but may be changed if required<br>
- The option <b>Mask-Limit</b> is set to 0.45mm, resulting in covered or tented via holes for vias of 0.45mm and smaller. The option may be changed if required.<br>
- The options <b>Shapes</b> and <b>Misc</b> are not relevant. Values for <b>Shapes-Smds-Roundness</b> are not critical and can be set as you require.
<p>
<p>
You can set higher minimum values if you wish, setting lower minimum values is <u>not advisable</u>.<br>
If you need lower minimum values, please use a different Eurocircuits-EAGLE design rule file. For details see the Eurocircuits-EAGLE dru overview table.
<p>
Your Eurocircuits Team
Since Version 6.2.2 text objects can contain more than one line,
which will not be processed correctly with this version.