Harald Welte
8221a959b7
add ncn8025-brekaout board
...
This is a small eval/breakout board for the NCN8025 smart card interface IC
2021-07-05 21:52:15 +02:00
Dimitri Stolnikov
c9f7d03060
Import presentation for the YANG project
2021-04-25 13:50:22 +02:00
Harald Welte
09d8d88f3a
README: note that most designs are EAGLE
2021-04-20 18:56:53 +02:00
Joachim Steiger
362084a12c
README.md remove link to wrong gerrit repo - no gerrit for this one yet
2021-03-30 18:26:09 +02:00
Joachim Steiger
1c9ced0ef8
README.md fix urls for cloning and cgit
2021-03-30 18:02:04 +02:00
Martin Schramm
b0c7493b7b
ngff: update schematic pdf and placement pdf to hw version 3
2021-03-23 19:29:35 +01:00
Martin Schramm
df09e2a688
ngff: update schematic pdf and placement pdf to hw version 3
2021-03-23 19:25:38 +01:00
Harald Welte
3b7a553e40
add README.md on what this repository is all about
2021-03-21 23:26:08 +01:00
Martin Schramm
696a0f1c41
sfp-breakout: update BOM attribs for availability
...
... for next production run
2021-02-07 22:22:55 +01:00
Martin Schramm
06b095957c
ngff-breakout: update sch, brd and BOM to current production run of v3
2021-02-07 20:47:17 +01:00
Martin Schramm
8cfaf0c0da
ngff-breakout: improve GND around 4th MHF4-SMA section
2021-01-29 02:58:56 +01:00
Martin Schramm
bdf8d0d0fd
ngff-breakout: update eBoM towards v3
2021-01-11 21:34:14 +01:00
Martin Schramm
f138bb61cb
ngff-breakout: remove solder cream for SMT stand-off GND area
...
...means screws from both sides, but enables changing to either
position for 3042 and 3052 cards
2021-01-11 17:18:20 +01:00
Martin Schramm
e0bcb0f223
ngff-breakout: add BOM attributes for 2.45mm stand-off and M.2 conn
2021-01-11 16:56:39 +01:00
Martin Schramm
863b150c3d
ngff-breakout: commit a v3 candidate for 3042 and 3052 cards
...
* PCBA now supports 3042 and 3052 M.2/NGFF cards
* PCBA is now 100 m taller
* fourth MHf4-SMA connector combination w/ TVS
2020-11-09 15:22:04 +01:00
Harald Welte
9fd5dc295d
initial design for DUS LMT breakout board
2020-11-01 20:42:33 +01:00
Harald Welte
1714155221
siu-clock-breakout: export PDF files
2020-10-17 19:08:52 +02:00
Harald Welte
b5a44452ee
clock-generator: Add 'export' version of frontpanel (mirrored)
2020-10-14 15:34:17 +02:00
Harald Welte
f44a9a2915
add export DXF for production (mirrored)
2020-10-14 15:31:35 +02:00
Harald Welte
82b0c74a16
siu-clock-breakout-frontpanel: Fix layer association
2020-10-14 15:31:19 +02:00
Joachim Steiger
0a38895c94
clock-converter: add TFP 4 outline to frontpanel
2020-10-10 01:01:26 +02:00
Harald Welte
879b832e23
clock-generator-frontpanel: Fix spacing of panel mount cut-outs
...
they must not be symmetric, but in multiple of 5.08mm
2020-10-09 20:55:35 +02:00
Harald Welte
08d39013cf
clock-generator: Add actual "TFP 7" outline
2020-10-09 20:39:38 +02:00
Harald Welte
21a92a3519
siu-clock-breakout: Add actual fischer TFP 4 outline
2020-10-09 20:28:11 +02:00
Joachim Steiger
2ab9260cd4
clock-converter/clock-generator frontpanels
...
layout generated from eagle to dxf and transferring the measurements.
no outline yet (needs offset pcb border to frontpanel corner)
2020-10-09 01:22:09 +02:00
Joachim Steiger
03daed7bb3
siu-clock-breakout frontpanel
...
layout generated from eagle to dxf and measurements and datasheets
no outline yet. (offset frontpanel border to pcb-border)
2020-10-08 00:17:08 +02:00
Harald Welte
cdd8f3c4d4
mpcie-breakout: Remove GND via underneath U.FL connectors
2020-09-10 22:50:23 +02:00
Martin Schramm
ba452d6f69
sfp-breakout: BOM: update L1, L2 type
2020-09-08 18:51:58 +02:00
Harald Welte
dcb6614e6c
RJ45 jumper box design
2020-08-15 12:44:00 +02:00
Harald Welte
f19750a702
siu-clock-breakout: Add missing component values
2020-07-27 21:42:32 +02:00
Martin Schramm
2adf6db5b9
clk-gen: commit GPIO pinsheet for SAMD21E in clk-gen v2 (solves OS#4656)
...
... in Gnumeric format
2020-07-24 15:31:20 +02:00
Harald Welte
656e36143a
add SIU clock breakout board design
...
This board contains a 10P10C connector in the same pin-out as the
Ericsson SIU-02 together with some differential receivers/drivers to
convert the 1PPS from/to single-ended signals.
2020-07-17 22:43:53 +02:00
Martin Schramm
6fd98dc7b1
clock-generator: create updated sch + brd views, purge old data
2020-07-07 18:13:00 +02:00
Martin Schramm
c247aacba9
clock-generator: purge old v1 eBOM
2020-07-07 17:39:57 +02:00
Martin Schramm
abdefdccdb
clock-generator: upd ext'd BOM attributes and update v2 eBOM
2020-07-07 17:38:32 +02:00
Martin Schramm
5b9227d5c9
sfp-experimenter: update ext'd attribs and BOM
2020-06-10 17:57:14 +02:00
Martin Schramm
b771e44e0e
sfp-experimenter: update SFP cage part number
2020-06-10 15:33:56 +02:00
Martin Schramm
b52be662da
clock-generator: update schematics pdf
2020-06-08 16:29:17 +02:00
Martin Schramm
070141634a
gtm900-bo: purge unused layers in schema + board
2020-06-04 17:17:55 +02:00
Martin Schramm
2fb8944e8d
gtm900-bo: exchange main LDO's BOM attributes
...
Although the correct name was given in the schematic (MCP1827T-ADJE/ET),
the BOM contained an LD1085, which is part of the same library...
Now the extended attributes also reflect the correct part.
2020-06-04 17:12:19 +02:00
Martin Schramm
f8c206a5be
gtm900-bo: update parts to avail @Digikey, upd all ext'd attribs
...
... in sch and brd too
2020-06-01 17:42:47 +02:00
Martin Schramm
1cbeb51f4d
gtm900-bo: add SMT spacer as mechanical BOM-only parts
2020-05-27 17:44:18 +02:00
Martin Schramm
b5a341a70c
gtm900-bo: complete v1 eBOM + export as gnumeric and xls format
2020-05-27 17:17:03 +02:00
Martin Schramm
86a2c70a67
gtm900-bo: add header for power source selection (DC in / USB)
2020-05-22 23:33:49 +02:00
Martin Schramm
7f920a3085
gtm900-bo: ease some part's distances, increase OSHW logo
2020-05-22 21:34:15 +02:00
Martin Schramm
db7c7a1194
gtm900-bo: re-introduce serial 0R on UART_RI
...
...not, that it was needed, but just in case...
2020-05-19 14:31:44 +02:00
Martin Schramm
b9df775569
gtm900-bo: ERC + DRC done + corrections
2020-05-18 20:57:23 +02:00
Martin Schramm
6e2422c979
gtm900-bo: routing done, no airwires left, mirrored FPC removed
2020-05-18 20:39:01 +02:00
Martin Schramm
aba83c5ecc
gtm900-bo: hopefully incorporating all we discussed last weeks
...
see OS#4030
2020-05-17 14:03:37 +02:00
Martin Schramm
9f860f796e
gtm900: added CP2105 and 3.5mm TRRS audio jack, remv'd aux conn
...
adds to OS#4030
2020-04-27 19:16:49 +02:00