Commit Graph

341 Commits

Author SHA1 Message Date
Harald Welte 9093d75825 gtm900-bo: alternative 100n + LED part numbers 2024-03-21 18:30:02 +01:00
Martin Schramm b8b187e2de gtm900-bo: replace JLCPCB cpl file
The missing T1,T2 now are in.
2024-03-21 17:51:41 +01:00
Martin Schramm c55e611875 gtm900-bo: add JLCPCB engineering data
BOM, gerber+drill files, centroid data
2024-02-27 23:56:11 +01:00
Martin Schramm f9f95055db gtm900-bo: run DRC (JLCPCB rules) + repair 2024-02-27 23:48:09 +01:00
Martin Schramm 66e05822f1 gtm900-bo: new SIM holder, add LCSC part numbers
Now using a XunPu SIM-105B-ARP8 SIM holder which is somewhat close
to the JAE SF7W008S1A.
2024-02-27 22:04:01 +01:00
Stephan Skrodzki d3d089fac9 3d printable case based on Ultimate Box Maker 2024-01-25 17:56:16 +01:00
Martin Schramm 5fc6a8c202 gtm900-bo: change silkscreen name to 'OsmoGTM900 breakout v3' 2024-01-18 17:26:56 +01:00
Martin Schramm e92f888d57 gtm900-bo: add empty LCSC_PART attribute to all parts 2024-01-18 17:22:33 +01:00
Martin Schramm dcdbc16297 sfp-breakout: update Gerber names 2024-01-07 18:53:23 +01:00
Martin Schramm 3a73b5ac3d gtm900-bo: update v3 schema pdf 2023-11-15 19:40:01 +01:00
Martin Schramm cf3db35b38 gtm900-bo: add interactive BOM (ibom) html file for manual placement 2023-11-15 19:38:03 +01:00
Martin Schramm c8fdc3a1b0 gtm900-bo: add eBOM 2023-11-06 15:18:50 +01:00
Martin Schramm 818c11a69c gtm900-bo: add 47R into both UARTs' wires 2023-11-06 15:16:18 +01:00
Martin Schramm 9a46c536ac gtm900-bo: switch direction inputs for level shifter IC1 2023-11-02 21:57:39 +01:00
Martin Schramm 9d07b47e6e gtm900-bo: rename main files w/o explicit version 2023-11-02 13:09:02 +01:00
Harald Welte 429f2488ae eksos-rj45-breakout: Move OSHW logo to have no overlap 2023-10-19 10:52:39 +02:00
Harald Welte 974a87f6ea eksos-rj45-breakout: Add various dimensions 2023-10-19 10:52:39 +02:00
Martin Schramm 3df1c2db75 gtm900-breakout: add next design v3 2023-10-10 23:25:35 +02:00
Harald Welte 95d3205311 Add eksos-fanmount.dxf
This is the fan mounting plate that forms the top part of the Nokia
EKSOS DIY enclosure of
2023-08-27 15:09:01 +02:00
Harald Welte b43caeeb02 amr-breakout: Fix silkscreen label of IN3
Closes: OS#5369
2023-08-21 21:35:36 +02:00
Harald Welte c32e5f8a3c amr-breakout: Add pull-ups for !AC97_RESET and !PRIMARY_DN
Closes: OS#5369
2023-08-21 21:34:32 +02:00
Harald Welte aedb685166 Add note about EKSOS breakout boards 2023-08-11 13:55:56 +02:00
Harald Welte 81fc18a0a0 eksos-rj45-breakout-for_slot: Move IDC connectors 11mm towards edge
It turns out that it's not very easy to bend the 64pos ribbon cable,
so let's make sure the IDC connectors align with  the plane of the
ribbon cable from the PSTN/ISDN line cards.
2023-08-11 13:53:43 +02:00
Harald Welte da38374d9f eksos-rj45-breakout: Update DS1130 library (3 more SHLD, 1 more drill) 2023-08-11 13:53:43 +02:00
Harald Welte 48379a9f9f eksos-rj45-breakout16: ad label/copyright/license/OSHW 2023-08-11 13:53:43 +02:00
Harald Welte 2e38688343 ISDN/POTS break-out board for NOKIA EKSOS N20 slot 2023-08-11 13:53:43 +02:00
Harald Welte e12766070d RJ45 breakout board for NOKA EKSOS ISDN / POTS ports
These board designs  assumes that you use a 64pos (type 3 a+c)
DIN-connector with a flat ribbon cable to a 2x32 2.54mm pitch (IDE/SCSI
style) header to interconnect them.

The point is that assembling that ribbon cable with IDC technology is
much faster than performing soldering or LSA+ type termination on 32
individual wires.
2023-08-11 13:53:43 +02:00
Harald Welte e7daf92415 pico-pcm-cardem: add various bom annotations 2023-07-18 21:21:44 +02:00
Harald Welte 8ba1138c48 pico-pcm-cardem: Initial design
this is just a convenience board to test/evaluate the idea of a rp2040
based SIM card emulator + PCM slave
2023-07-02 12:55:54 +02:00
Harald Welte fbae9bd476 plutosdr-revb-extclk: Fix capacitor footprints
* Always use _0603 and not 0603 (oversized)
* 1uF can be 0603, only 10uF should be 0805

Related: OS#5892
2023-07-02 12:55:54 +02:00
Harald Welte dbd53d6df5 plutosdr-revb-extclk: don't shut-down LTC via SD1/SD2
In the original PlutoSDR RevC or higher, there's a BSS138 FET
that [optionally] pulls low the SD1/SD2 pins in order to activate
the external clock input.

In this circuit, we don't have GPIO control but permanently enable
the LTC.

Related: OS#5892
2023-07-02 12:55:54 +02:00
Harald Welte 69dc3c912b [cosmetic] plutosdr-revb-extclk: Route last missing airwire inside pad
Related: OS#5892
2023-07-02 12:55:54 +02:00
Martin Schramm 7ff040ae81 sfp-experimenter: insert main fiducials 2023-05-15 19:19:43 +02:00
Martin Schramm 5bda47b6b3 sfp-experimenter: update ext BOM attr to newer Digikey format 2023-05-15 19:00:07 +02:00
Martin Schramm 25580557e9 sfp-*: reintroduce changes for 10µ/1206 caps 2023-04-17 18:40:08 +02:00
Martin Schramm 67085c6d02 Merge remote-tracking branch 'refs/remotes/origin/master' 2023-04-14 21:09:10 +02:00
Martin Schramm 2dab54ca1c sfp-*: change all 10µF/16V 0805 to 1206 (solves SYS#5397)
also update all URLs to the current Digikey URI scheme
2023-04-14 20:53:51 +02:00
Harald Welte 25624c5fa7 new X.21 "jumper box" design
DB-15 male + female connector with rows of pin headers to use jumper
wires to connect signals in any desired combination/permutation.
2023-03-04 13:58:54 +01:00
Harald Welte 0e6eb31ec7 New design: plutosdr-revb-extclk
This is a small circuit board containing the "external clock ref input"
circuitry that was added to PlutoSDR RevD.  It can be used to
upgrade/rework RevB boards with the same clock input as the later RevD.

Related: OS#5892
2023-02-12 17:32:32 +01:00
Harald Welte c5497debfc bgt-gs305e: Target 3000 design files created (manually) from DXF 2023-02-03 12:28:35 +01:00
Harald Welte 8607ec5ffa initial version of bgt-gs305e: BGT Mount for Netgear GS305E switch 2023-02-03 12:26:02 +01:00
Harald Welte dcad3c6b6a rj45_jumper_box: Add OSWH + sysmocom logo; final v2 as ordered 2023-01-20 16:38:05 +01:00
Harald Welte 561c824219 rj45_jumper_box: Connect shield of two connectors 2023-01-20 10:46:32 +01:00
Harald Welte b625dbf06b rj45_jumper_box: Use different RJ45 jack; both on top layer
The original design (one RJ45 on top, one on bottom) was easy to route
but was difficult to handle. Let's swap both connectors to top, and use
a low-cost Chinese RJ45.
2023-01-20 10:44:04 +01:00
Harald Welte 0137f0f2a7 sfp-experimenter: add datasheets of possible alternative LVDS tx/rx 2022-11-14 17:57:25 +01:00
Harald Welte e4c04baf0d sfp-experimenter: Add LVDS transmitter/receiver data sheets 2022-11-14 16:33:06 +01:00
Harald Welte 7b4ddba001 initial check-in of bgt-keystone project
This adds a 3U component carrier module into which you can mix and
match keystone modules as needed.
2022-10-22 14:36:52 +02:00
Martin Schramm fa5b17a0bd ngff-cardem: update schematics
This includes now the GND for OsmoSer conn.
2022-09-19 13:22:19 +02:00
Martin Schramm f0f029afd5 ngff-cardem: connect OsmoSer's GND to GND (solves SYS#5514)
This change somehow didn't make it upstream though committed as
bf211d3; so recreated.
2022-09-19 13:16:04 +02:00
Harald Welte 4833d17d6b RS422-protector (to be used in OCTOI hub) 2022-08-22 20:38:22 +02:00