Harald Welte
11f0d5e846
contrib/jenkins.sh: Fix missing nvic.h
...
if we don't call 'make' in libopencm3 of a clean install, we will be
missing some generated nvic.h header files and compilation will fail
like below:
In file included from ../../libopencm3//include/libopencm3/cm3/nvic.h:147,
from ../../librfn/librfn/libopencm3/console_stm32.c:24:
../../libopencm3//include/libopencm3/dispatch/nvic.h:8:11: fatal error: libopencm3/stm32/f1/nvic.h: No such file or directory
# include <libopencm3/stm32/f1/nvic.h>
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
2022-08-11 22:44:49 +02:00
Oliver Smith
c7e08bbd11
contrib/jenkins: skip upload if nothing new
...
Add the same behavior as in osmo-ccid-firmware
I3f70d6149b29ec2ff7f185dfae8bc8d4a1953dc2.
2022-07-15 12:56:08 +02:00
Oliver Smith
1067d320fa
contrib/jenkins: use rsync --copy-links for latest
...
Don't upload symlinks that point to files that aren't there. Upload the
files they should point to instead.
2022-07-15 12:30:53 +02:00
Oliver Smith
ecf0442099
contrib/jenkins: build all projects before upload
...
Don't upload anything if any of the projects fail to build to avoid
ending up with a half-updated directory at ftp.osmocom.org and possibly
having confusion about the versions.
While at it, move known_hosts to /tmp so it doesn't clutter the git repo
dir in local testing.
2022-07-12 12:40:44 +02:00
Oliver Smith
1c52a132c8
contrib/jenkins.sh: build libopencm3 first
...
Fix for:
fatal error: libopencm3/stm32/f1/nvic.h: No such file or directory
Related: SYS#6041
2022-07-12 12:17:12 +02:00
Oliver Smith
7f8de1ae23
contrib/jenkins.sh: "RES:$?" -> "DONE"
...
Don't try to print the exit code of make. It's either always 0 or the
program aborts before reaching the echo due to the "set -e". Removing $?
here makes that more obvious.
2022-07-12 12:10:23 +02:00
Harald Welte
cbff8e75d0
Make code compatible with picolibc >= 1.7.3
...
picolibc commit 1eba3461fd1664d38be36f3bf21898f889a7d2e3 changed
the way how stdio backends are used by picolibc. Let's use the
PICOLIBC_STDIO_GLOBALS to differentiate the old vs. new method.
Closes: SYS#6042
2022-07-11 17:56:55 +02:00
Harald Welte
63c07a8bd1
rfdsatt: remove redundant redeclaration of microvty_fibre
...
rfdsatt.c:501:16: warning: redundant redeclaration of 'microvty_fibre' [-Wredundant-decls]
501 | extern fibre_t microvty_fibre;
| ^~~~~~~~~~~~~~
In file included from rfdsatt.c:35:
../../libcommon/include/libcommon/microvty.h:48:16: note: previous declaration of 'microvty_fibre' was here
48 | extern fibre_t microvty_fibre;
| ^~~~~~~~~~~~~~
2022-07-11 17:33:55 +02:00
Harald Welte
7527cab6d8
add missing libcommon.mk
2021-05-09 12:05:46 +02:00
Harald Welte
ea39ae17d7
add contrib/jenkins.sh for build verification and publcation of builds
2021-05-09 12:00:31 +02:00
Harald Welte
c8cb0398eb
rename relay-driver binary to directory name
...
This makes a general-purpose build upload script more simple
2021-05-09 12:00:31 +02:00
Harald Welte
bf11a41c88
Makefile: Build file names with version suffix
2021-05-09 12:00:31 +02:00
Harald Welte
3a339ee80b
rfdsatt: Add support to store/load config to/from EEPROM
2021-05-07 20:05:12 +02:00
Harald Welte
e63259baaa
rfdsatt: add low-level EEPROM read/write support
2021-05-07 20:04:53 +02:00
Harald Welte
3b39d671fe
rfdsatt: fix I2C initialization
...
* 2MHz is far enough for I2C
* we need to re-map I2C1 to PB8+PB9
2021-05-07 16:23:30 +02:00
Harald Welte
7d1c8741b8
rfdsatt: interactive help for test + interact mode
2021-05-07 12:28:30 +02:00
Harald Welte
b86a2daad1
microvty: Implement backspace and ctrl+c support; ignnore TAB + ESC
2021-05-07 12:22:28 +02:00
Harald Welte
3cfd61baa7
rfdsatt: Move to 1-based channel and stage numbers
...
This matches more with how SCPI controlled attenuators work
2021-05-07 12:22:28 +02:00
Harald Welte
dfb3294ac8
Detect the OpenBLT XCP-CONNECT and reset (jump to bootloader)
...
This allows for firmware updates without power cycling
2021-05-07 08:37:35 +02:00
Harald Welte
60499f4ebf
rfdsatt: add 'test' command for ramping up the gain of one channel
2021-05-06 08:33:01 +02:00
Harald Welte
1adf7c0ee4
rfdsatt: fix msleep()
2021-05-06 08:32:48 +02:00
Harald Welte
627ead7b21
attenuator: Add convenience functions for setting all stages
2021-05-06 08:26:46 +02:00
Harald Welte
5d2e32e4b8
attenuator: rename functions to make them more descriptive
2021-05-06 08:20:03 +02:00
Harald Welte
6284afc23d
attenuator: split out 'execution' from 'validation' part
2021-05-06 08:16:18 +02:00
Harald Welte
73b514d793
rfdsatt: Add 'interactive' mode with single-key modifications
2021-05-05 23:00:14 +02:00
Harald Welte
e431886969
attenuator: disable GPIO debugging
2021-05-05 23:00:14 +02:00
Harald Welte
7b684307f7
attenuator: Fix stored/cached value per attenuator
2021-05-05 23:00:14 +02:00
Harald Welte
4e20a652a2
rfdsatt: abbreviate mircovty commands as we have no tab completion
2021-05-05 23:00:14 +02:00
Harald Welte
b94ed88133
rfdsatt: Add 'attenuator-show' microvty command
2021-05-05 23:00:14 +02:00
Harald Welte
cd97005150
rfdsatt: move LED and microvty to fibre/protothreads
2021-05-05 23:00:14 +02:00
Harald Welte
abfceb45f5
attenuator: set initial state of outputs to 'low'
...
otherwise they might be high, which means the latch is permanently
enabled.
2021-04-13 19:02:20 +02:00
Harald Welte
e8849c28ea
rfdsatt: re-maip HSE pins to PD0/PD1
...
STM32F1 uses those pins as HSE by default, we need to explicitly
re-map them to PD0/PD1
2021-04-13 18:57:40 +02:00
Harald Welte
26b10f3e5d
rfdsatt: Disalbe JTAG AF on some GPIO lines overlapping LE
2021-04-13 18:42:14 +02:00
Harald Welte
f025e64a57
attenuator: Print level at time of write.
2021-04-13 17:21:04 +02:00
Harald Welte
2a91fc857b
attenuator.c: DAT-31A-S+ has 6th unused bit
...
So In reality DAT-31A-S+ seems to have steps of 0.5dB, but the LSB
is "defined" to be alwasy 0. This means we have to multiply the
dB value by 2 (shift one left) to make sure the LSB in 0.5dB steps
remains 0, and to make sure we actually step n steps of 1dB
2021-04-13 17:19:08 +02:00
Harald Welte
b4781312f9
import firmware for the blue-pill relay driver board (NCV7240)
...
this usd to be in a private fork of i2c-star.git, but let's
keep all osmocom related stm32f0/f1 firmware projects here.
2021-04-11 17:03:16 +02:00
Harald Welte
3af30f0a6a
rfdsatt: use librfn/time.h instead of own systick handler
2021-04-11 16:24:33 +02:00
Harald Welte
f9b2ca10b4
import librfm3 from https://github.com/daniel-thompson/i2c-star.git
...
Daniel Thompson has loads of useful code out there :)
Reflects 07eff5c0b7333cfcc3d98ddc6ebf26e34c9c02ef of that repo.
2021-04-11 15:43:10 +02:00
Harald Welte
13ae607484
rfdsatt: move away from deprecated libopencm3 APIs
...
This resolves compiler warnings about the use of deprecated APIs.
2021-03-28 22:08:20 +02:00
Harald Welte
436ba01a47
update libopencm3 to use the vector.h slot addition
2021-03-28 22:05:29 +02:00
Harald Welte
ff70203fba
update libopencm3 to osmocom fork (for vector table patch)
2021-03-28 22:00:07 +02:00
Harald Welte
645ed3a795
WIP: support for STM32F051 in addition to STM32F103
...
Related: SYS#5410
2021-03-28 18:43:25 +02:00
Harald Welte
8074b2cdc4
rfdsatt: Fix length of UUID string buffers
2021-03-28 18:06:59 +02:00
Harald Welte
f65f08b841
rfdsatt: Command to show firmware build version
2021-03-28 16:53:54 +02:00
Harald Welte
80c9eee3f6
move libopencm3 make rules to 'mk'
2021-03-28 16:48:52 +02:00
Harald Welte
f58fda447e
rfdsatt: add uuid and reset command; print banner at startup
2021-03-28 16:46:53 +02:00
Harald Welte
f26576f299
update erroneously copy+pasted copyright notice
2021-03-28 16:46:33 +02:00
Harald Welte
1cc7bad32e
microvty: re-display prompt on empty command
2021-03-28 16:46:15 +02:00
Harald Welte
f962556911
integrate microvty
2021-03-28 16:16:16 +02:00
Harald Welte
8bcec75693
integrate picolibc and its stdio
2021-03-28 15:29:48 +02:00