122 lines
3.0 KiB
C
122 lines
3.0 KiB
C
/** @addtogroup flash_file
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2010 Thomas Otto <tommi@viadmin.org>
|
|
* Copyright (C) 2010 Mark Butler <mbutler@physics.otago.ac.nz>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/**@{*/
|
|
|
|
#include <libopencm3/stm32/flash.h>
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief Set the Number of Wait States
|
|
|
|
Used to match the system clock to the FLASH memory access time. See the
|
|
programming manual for more information on clock speed ranges. The latency must
|
|
be changed to the appropriate value <b>before</b> any increase in clock
|
|
speed, or <b>after</b> any decrease in clock speed.
|
|
|
|
@param[in] uint32_t ws: values 0-7 only.
|
|
*/
|
|
|
|
void flash_set_ws(uint32_t ws)
|
|
{
|
|
uint32_t reg32;
|
|
|
|
reg32 = FLASH_ACR;
|
|
reg32 &= ~((1 << 0) | (1 << 1) | (1 << 2));
|
|
reg32 |= ws;
|
|
FLASH_ACR = reg32;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief Unlock the Flash Program and Erase Controller
|
|
|
|
This enables write access to the Flash memory. It is locked by default on
|
|
reset.
|
|
*/
|
|
|
|
void flash_unlock(void)
|
|
{
|
|
/* Clear the unlock sequence state. */
|
|
FLASH_CR |= FLASH_CR_LOCK;
|
|
|
|
/* Authorize the FPEC access. */
|
|
FLASH_KEYR = FLASH_KEYR_KEY1;
|
|
FLASH_KEYR = FLASH_KEYR_KEY2;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief Lock the Flash Program and Erase Controller
|
|
|
|
Used to prevent spurious writes to FLASH.
|
|
*/
|
|
|
|
void flash_lock(void)
|
|
{
|
|
FLASH_CR |= FLASH_CR_LOCK;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief Clear the Programming Error Status Flag
|
|
|
|
*/
|
|
|
|
void flash_clear_pgperr_flag(void)
|
|
{
|
|
FLASH_SR |= FLASH_SR_PGPERR;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief Clear the End of Operation Status Flag
|
|
|
|
*/
|
|
|
|
void flash_clear_eop_flag(void)
|
|
{
|
|
FLASH_SR |= FLASH_SR_EOP;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief Clear the Busy Status Flag
|
|
|
|
*/
|
|
|
|
void flash_clear_bsy_flag(void)
|
|
{
|
|
FLASH_SR &= ~FLASH_SR_BSY;
|
|
}
|
|
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief Wait until Last Operation has Ended
|
|
|
|
This loops indefinitely until an operation (write or erase) has completed by
|
|
testing the busy flag.
|
|
*/
|
|
|
|
void flash_wait_for_last_operation(void)
|
|
{
|
|
while ((FLASH_SR & FLASH_SR_BSY) == FLASH_SR_BSY);
|
|
}
|
|
/**@}*/
|
|
|