74 lines
2.2 KiB
C
74 lines
2.2 KiB
C
/** @addtogroup flash_defines
|
|
*
|
|
*/
|
|
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include <libopencm3/cm3/common.h>
|
|
|
|
BEGIN_DECLS
|
|
|
|
/**
|
|
* This buffer is used for instruction fetches and is enabled by default after
|
|
* reset.
|
|
*
|
|
* Note carefully the clock restrictions under which the prefetch buffer may be
|
|
* enabled or disabled. Changes are normally made while the clock is running in
|
|
* the power-on low frequency mode before being set to a higher speed mode.
|
|
*
|
|
* See the reference manual for details.
|
|
*/
|
|
void flash_prefetch_enable(void);
|
|
|
|
/**
|
|
* Note carefully the clock restrictions under which the prefetch buffer may be
|
|
* set to disabled. See the reference manual for details.
|
|
*/
|
|
void flash_prefetch_disable(void);
|
|
|
|
|
|
/** Set the Number of Wait States.
|
|
|
|
Used to match the system clock to the FLASH memory access time. See the
|
|
programming manual for more information on clock speed ranges. The latency must
|
|
be changed to the appropriate value <b>before</b> any increase in clock
|
|
speed, or <b>after</b> any decrease in clock speed.
|
|
|
|
@param[in] ws values from @ref flash_latency.
|
|
*/
|
|
void flash_set_ws(uint32_t ws);
|
|
|
|
/** Lock the Flash Program and Erase Controller
|
|
* Used to prevent spurious writes to FLASH.
|
|
*/
|
|
void flash_lock(void);
|
|
|
|
/** Unlock the Flash Program and Erase Controller
|
|
* This enables write access to the Flash memory. It is locked by default on
|
|
* reset.
|
|
*/
|
|
void flash_unlock(void);
|
|
|
|
/** Unlock the Option Byte Access.
|
|
* This enables write access to the option bytes. It is locked by default on
|
|
* reset.
|
|
*/
|
|
void flash_unlock_option_bytes(void);
|
|
|
|
END_DECLS |