libopencm3/lib/lpc43xx/ipc.c

59 lines
1.8 KiB
C

/*
* This file is part of the libopencm3 project.
*
* Copyright (C) 2012 Benjamin Vernoux <titanmkd@gmail.com>
*
* This library is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this library. If not, see <http://www.gnu.org/licenses/>.
*/
#include <libopencm3/lpc43xx/ipc.h>
#include <libopencm3/lpc43xx/creg.h>
#include <libopencm3/lpc43xx/rgu.h>
/* Set M0 in reset mode */
void ipc_halt_m0(void)
{
volatile uint32_t rst_active_status1;
/* Check if M0 is reset by reading status */
rst_active_status1 = RESET_ACTIVE_STATUS1;
/* If the M0 has reset not asserted, halt it... */
while (rst_active_status1 & RESET_CTRL1_M0APP_RST) {
RESET_CTRL1 = ((~rst_active_status1) | RESET_CTRL1_M0APP_RST);
rst_active_status1 = RESET_ACTIVE_STATUS1;
}
}
void ipc_start_m0(uint32_t cm0_baseaddr)
{
volatile uint32_t rst_active_status1;
/* Set M0 memory mapping to point to start of M0 image */
CREG_M0APPMEMMAP = cm0_baseaddr;
/* Start/run M0 core */
/* Release Slave from reset, first read status */
rst_active_status1 = RESET_ACTIVE_STATUS1;
/* If the M0 is being held in reset, release it */
/* 1 = no reset, 0 = reset */
while (!(rst_active_status1 & RESET_CTRL1_M0APP_RST)) {
RESET_CTRL1 = ((~rst_active_status1) & ~RESET_CTRL1_M0APP_RST);
rst_active_status1 = RESET_ACTIVE_STATUS1;
}
}