!!omap
- SSP0_CR0:
    fields: !!omap
    - DSS:
        access: rw
        description: Data Size Select
        lsb: 0
        reset_value: '0'
        width: 4
    - FRF:
        access: rw
        description: Frame Format
        lsb: 4
        reset_value: '0'
        width: 2
    - CPOL:
        access: rw
        description: Clock Out Polarity
        lsb: 6
        reset_value: '0'
        width: 1
    - CPHA:
        access: rw
        description: Clock Out Phase
        lsb: 7
        reset_value: '0'
        width: 1
    - SCR:
        access: rw
        description: Serial Clock Rate
        lsb: 8
        reset_value: '0'
        width: 8
- SSP1_CR0:
    fields: !!omap
    - DSS:
        access: rw
        description: Data Size Select
        lsb: 0
        reset_value: '0'
        width: 4
    - FRF:
        access: rw
        description: Frame Format
        lsb: 4
        reset_value: '0'
        width: 2
    - CPOL:
        access: rw
        description: Clock Out Polarity
        lsb: 6
        reset_value: '0'
        width: 1
    - CPHA:
        access: rw
        description: Clock Out Phase
        lsb: 7
        reset_value: '0'
        width: 1
    - SCR:
        access: rw
        description: Serial Clock Rate
        lsb: 8
        reset_value: '0'
        width: 8
- SSP0_CR1:
    fields: !!omap
    - LBM:
        access: rw
        description: Loop Back Mode
        lsb: 0
        reset_value: '0'
        width: 1
    - SSE:
        access: rw
        description: SSP Enable
        lsb: 1
        reset_value: '0'
        width: 1
    - MS:
        access: rw
        description: Master/Slave Mode
        lsb: 2
        reset_value: '0'
        width: 1
    - SOD:
        access: rw
        description: Slave Output Disable
        lsb: 3
        reset_value: '0'
        width: 1
- SSP1_CR1:
    fields: !!omap
    - SSE:
        access: rw
        description: SSP Enable
        lsb: 1
        reset_value: '0'
        width: 1
    - MS:
        access: rw
        description: Master/Slave Mode
        lsb: 2
        reset_value: '0'
        width: 1
    - SOD:
        access: rw
        description: Slave Output Disable
        lsb: 3
        reset_value: '0'
        width: 1
- SSP0_DR:
    fields: !!omap
    - DATA:
        access: rw
        description: Software can write data to be transmitted to this register, and
          read data that has been
        lsb: 0
        reset_value: '0'
        width: 16
- SSP1_DR:
    fields: !!omap
    - DATA:
        access: rw
        description: Software can write data to be transmitted to this register, and
          read data that has been
        lsb: 0
        reset_value: '0'
        width: 16
- SSP0_SR:
    fields: !!omap
    - TFE:
        access: r
        description: Transmit FIFO Empty
        lsb: 0
        reset_value: '1'
        width: 1
    - TNF:
        access: r
        description: Transmit FIFO Not Full
        lsb: 1
        reset_value: '1'
        width: 1
    - RNE:
        access: r
        description: Receive FIFO Not Empty
        lsb: 2
        reset_value: '0'
        width: 1
    - RFF:
        access: r
        description: Receive FIFO Full
        lsb: 3
        reset_value: '0'
        width: 1
    - BSY:
        access: r
        description: Busy.
        lsb: 4
        reset_value: '0'
        width: 1
- SSP1_SR:
    fields: !!omap
    - TFE:
        access: r
        description: Transmit FIFO Empty
        lsb: 0
        reset_value: '1'
        width: 1
    - TNF:
        access: r
        description: Transmit FIFO Not Full
        lsb: 1
        reset_value: '1'
        width: 1
    - RNE:
        access: r
        description: Receive FIFO Not Empty
        lsb: 2
        reset_value: '0'
        width: 1
    - RFF:
        access: r
        description: Receive FIFO Full
        lsb: 3
        reset_value: '0'
        width: 1
    - BSY:
        access: r
        description: Busy.
        lsb: 4
        reset_value: '0'
        width: 1
- SSP0_CPSR:
    fields: !!omap
    - CPSDVSR:
        access: rw
        description: SSP Clock Prescale Register
        lsb: 0
        reset_value: '0'
        width: 8
- SSP1_CPSR:
    fields: !!omap
    - CPSDVSR:
        access: rw
        description: SSP Clock Prescale Register
        lsb: 0
        reset_value: '0'
        width: 8
- SSP0_IMSC:
    fields: !!omap
    - RORIM:
        access: rw
        description: Software should set this bit to enable interrupt when a Receive
          Overrun occurs
        lsb: 0
        reset_value: '0'
        width: 1
    - RTIM:
        access: rw
        description: Software should set this bit to enable interrupt when a Receive
          Time-out condition occurs
        lsb: 1
        reset_value: '0'
        width: 1
    - RXIM:
        access: rw
        description: Software should set this bit to enable interrupt when the Rx
          FIFO is at least half full
        lsb: 2
        reset_value: '0'
        width: 1
    - TXIM:
        access: rw
        description: Software should set this bit to enable interrupt when the Tx
          FIFO is at least half empty
        lsb: 3
        reset_value: '0'
        width: 1
- SSP1_IMSC:
    fields: !!omap
    - RORIM:
        access: rw
        description: Software should set this bit to enable interrupt when a Receive
          Overrun occurs
        lsb: 0
        reset_value: '0'
        width: 1
    - RTIM:
        access: rw
        description: Software should set this bit to enable interrupt when a Receive
          Time-out condition occurs
        lsb: 1
        reset_value: '0'
        width: 1
    - RXIM:
        access: rw
        description: Software should set this bit to enable interrupt when the Rx
          FIFO is at least half full
        lsb: 2
        reset_value: '0'
        width: 1
    - TXIM:
        access: rw
        description: Software should set this bit to enable interrupt when the Tx
          FIFO is at least half empty
        lsb: 3
        reset_value: '0'
        width: 1
- SSP0_RIS:
    fields: !!omap
    - RORRIS:
        access: r
        description: This bit is 1 if another frame was completely received while
          the RxFIFO was full
        lsb: 0
        reset_value: '0'
        width: 1
    - RTRIS:
        access: r
        description: This bit is 1 if the Rx FIFO is not empty, and has not been read
          for a time-out period
        lsb: 1
        reset_value: '0'
        width: 1
    - RXRIS:
        access: r
        description: This bit is 1 if the Rx FIFO is at least half full
        lsb: 2
        reset_value: '0'
        width: 1
    - TXRIS:
        access: r
        description: This bit is 1 if the Tx FIFO is at least half empty
        lsb: 3
        reset_value: '1'
        width: 1
- SSP1_RIS:
    fields: !!omap
    - RORRIS:
        access: r
        description: This bit is 1 if another frame was completely received while
          the RxFIFO was full
        lsb: 0
        reset_value: '0'
        width: 1
    - RTRIS:
        access: r
        description: This bit is 1 if the Rx FIFO is not empty, and has not been read
          for a time-out period
        lsb: 1
        reset_value: '0'
        width: 1
    - RXRIS:
        access: r
        description: This bit is 1 if the Rx FIFO is at least half full
        lsb: 2
        reset_value: '0'
        width: 1
    - TXRIS:
        access: r
        description: This bit is 1 if the Tx FIFO is at least half empty
        lsb: 3
        reset_value: '1'
        width: 1
- SSP0_MIS:
    fields: !!omap
    - RORMIS:
        access: r
        description: This bit is 1 if another frame was completely received while
          the RxFIFO was full, and this interrupt is enabled
        lsb: 0
        reset_value: '0'
        width: 1
    - RTMIS:
        access: r
        description: This bit is 1 if the Rx FIFO is not empty, has not been read
          for a time-out period, and this interrupt is enabled
        lsb: 1
        reset_value: '0'
        width: 1
    - RXMIS:
        access: r
        description: This bit is 1 if the Rx FIFO is at least half full, and this
          interrupt is enabled
        lsb: 2
        reset_value: '0'
        width: 1
    - TXMIS:
        access: r
        description: This bit is 1 if the Tx FIFO is at least half empty, and this
          interrupt is enabled
        lsb: 3
        reset_value: '0'
        width: 1
- SSP1_MIS:
    fields: !!omap
    - RORMIS:
        access: r
        description: This bit is 1 if another frame was completely received while
          the RxFIFO was full, and this interrupt is enabled
        lsb: 0
        reset_value: '0'
        width: 1
    - RTMIS:
        access: r
        description: This bit is 1 if the Rx FIFO is not empty, has not been read
          for a time-out period, and this interrupt is enabled
        lsb: 1
        reset_value: '0'
        width: 1
    - RXMIS:
        access: r
        description: This bit is 1 if the Rx FIFO is at least half full, and this
          interrupt is enabled
        lsb: 2
        reset_value: '0'
        width: 1
    - TXMIS:
        access: r
        description: This bit is 1 if the Tx FIFO is at least half empty, and this
          interrupt is enabled
        lsb: 3
        reset_value: '0'
        width: 1
- SSP0_ICR:
    fields: !!omap
    - RORIC:
        access: w
        description: Writing a 1 to this bit clears the 'frame was received when RxFIFO
          was full' interrupt
        lsb: 0
        reset_value: ''
        width: 1
    - RTIC:
        access: w
        description: Writing a 1 to this bit clears the Rx FIFO was not empty and
          has not been read for a time-out period interrupt
        lsb: 1
        reset_value: ''
        width: 1
- SSP1_ICR:
    fields: !!omap
    - RORIC:
        access: w
        description: Writing a 1 to this bit clears the 'frame was received when RxFIFO
          was full' interrupt
        lsb: 0
        reset_value: ''
        width: 1
    - RTIC:
        access: w
        description: Writing a 1 to this bit clears the Rx FIFO was not empty and
          has not been read for a time-out period interrupt
        lsb: 1
        reset_value: ''
        width: 1
- SSP0_DMACR:
    fields: !!omap
    - RXDMAE:
        access: rw
        description: Receive DMA Enable
        lsb: 0
        reset_value: '0'
        width: 1
    - TXDMAE:
        access: rw
        description: Transmit DMA Enable
        lsb: 1
        reset_value: '0'
        width: 1
- SSP1_DMACR:
    fields: !!omap
    - RXDMAE:
        access: rw
        description: Receive DMA Enable
        lsb: 0
        reset_value: '0'
        width: 1
    - TXDMAE:
        access: rw
        description: Transmit DMA Enable
        lsb: 1
        reset_value: '0'
        width: 1