!!omap
- SCU_SFSP0_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP0_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_5:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_6:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_7:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_8:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_9:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_10:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_11:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_12:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_13:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_14:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_15:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_16:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_18:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_19:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_20:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP2_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP2_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP2_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP2_6:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP2_7:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP2_8:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP2_9:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP2_10:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP2_11:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP2_12:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP2_13:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP3_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP3_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP3_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP3_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP3_5:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP3_6:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP3_7:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP3_8:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP4_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP4_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP4_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP4_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP4_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP4_5:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP4_6:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP4_7:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP4_8:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP4_9:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP4_10:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP5_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP5_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP5_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP5_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP5_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP5_5:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP5_6:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP5_7:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP6_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP6_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP6_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP6_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP6_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP6_5:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP6_6:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP6_7:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP6_8:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP6_9:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP6_10:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP6_11:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP6_12:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP7_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP7_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP7_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP7_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP7_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP7_5:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP7_6:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP7_7:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP8_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP8_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP8_5:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP8_6:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP8_7:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP8_8:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP9_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP9_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP9_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP9_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP9_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP9_5:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP9_6:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPA_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPA_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPB_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPB_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPB_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPB_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPB_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPB_5:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPB_6:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_5:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_6:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_7:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_8:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_9:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_10:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_11:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_12:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_13:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPC_14:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_5:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_6:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_7:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_8:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_9:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_10:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_11:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_12:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_13:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_14:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_15:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPD_16:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_5:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_6:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_7:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_8:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_9:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_10:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_11:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_12:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_13:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_14:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPE_15:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPF_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPF_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPF_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPF_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPF_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPF_5:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPF_6:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPF_7:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPF_8:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPF_9:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPF_10:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSPF_11:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSP1_17:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
    - EHD:
        access: rw
        description: Select drive strength
        lsb: 8
        reset_value: '0'
        width: 2
- SCU_SFSP2_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
    - EHD:
        access: rw
        description: Select drive strength
        lsb: 8
        reset_value: '0'
        width: 2
- SCU_SFSP2_4:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
    - EHD:
        access: rw
        description: Select drive strength
        lsb: 8
        reset_value: '0'
        width: 2
- SCU_SFSP2_5:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
    - EHD:
        access: rw
        description: Select drive strength
        lsb: 8
        reset_value: '0'
        width: 2
- SCU_SFSP8_0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
    - EHD:
        access: rw
        description: Select drive strength
        lsb: 8
        reset_value: '0'
        width: 2
- SCU_SFSP8_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
    - EHD:
        access: rw
        description: Select drive strength
        lsb: 8
        reset_value: '0'
        width: 2
- SCU_SFSP8_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
    - EHD:
        access: rw
        description: Select drive strength
        lsb: 8
        reset_value: '0'
        width: 2
- SCU_SFSPA_1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
    - EHD:
        access: rw
        description: Select drive strength
        lsb: 8
        reset_value: '0'
        width: 2
- SCU_SFSPA_2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
    - EHD:
        access: rw
        description: Select drive strength
        lsb: 8
        reset_value: '0'
        width: 2
- SCU_SFSPA_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
    - EHD:
        access: rw
        description: Select drive strength
        lsb: 8
        reset_value: '0'
        width: 2
- SCU_SFSP3_3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSCLK0:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSCLK1:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSCLK2:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSCLK3:
    fields: !!omap
    - MODE:
        access: rw
        description: Select pin function
        lsb: 0
        reset_value: '0'
        width: 3
    - EPD:
        access: rw
        description: Enable pull-down resistor at pad
        lsb: 3
        reset_value: '0'
        width: 1
    - EPUN:
        access: rw
        description: Disable pull-up resistor at pad
        lsb: 4
        reset_value: '0'
        width: 1
    - EHS:
        access: rw
        description: Select Slew rate
        lsb: 5
        reset_value: '0'
        width: 1
    - EZI:
        access: rw
        description: Input buffer enable
        lsb: 6
        reset_value: '0'
        width: 1
    - ZIF:
        access: rw
        description: Input glitch filter
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_SFSUSB:
    fields: !!omap
    - USB_AIM:
        access: rw
        description: Differential data input AIP/AIM
        lsb: 0
        reset_value: '0'
        width: 1
    - USB_ESEA:
        access: rw
        description: Control signal for differential input or single input
        lsb: 1
        reset_value: '1'
        width: 1
    - USB_EPD:
        access: rw
        description: Enable pull-down connect
        lsb: 2
        reset_value: '0'
        width: 1
    - USB_EPWR:
        access: rw
        description: Power mode
        lsb: 4
        reset_value: '0'
        width: 1
    - USB_VBUS:
        access: rw
        description: Enable the vbus_valid signal
        lsb: 5
        reset_value: '0'
        width: 1
- SCU_SFSI2C0:
    fields: !!omap
    - SCL_EFP:
        access: rw
        description: Select input glitch filter time constant for the SCL pin
        lsb: 0
        reset_value: '0'
        width: 1
    - SCL_EHD:
        access: rw
        description: Select I2C mode for the SCL pin
        lsb: 2
        reset_value: '0'
        width: 1
    - SCL_EZI:
        access: rw
        description: Enable the input receiver for the SCL pin
        lsb: 3
        reset_value: '0'
        width: 1
    - SCL_ZIF:
        access: rw
        description: Enable or disable input glitch filter for the SCL pin
        lsb: 7
        reset_value: '0'
        width: 1
    - SDA_EFP:
        access: rw
        description: Select input glitch filter time constant for the SDA pin
        lsb: 8
        reset_value: '0'
        width: 1
    - SDA_EHD:
        access: rw
        description: Select I2C mode for the SDA pin
        lsb: 10
        reset_value: '0'
        width: 1
    - SDA_EZI:
        access: rw
        description: Enable the input receiver for the SDA pin
        lsb: 11
        reset_value: '0'
        width: 1
    - SDA_ZIF:
        access: rw
        description: Enable or disable input glitch filter for the SDA pin
        lsb: 15
        reset_value: '0'
        width: 1
- SCU_ENAIO0:
    fields: !!omap
    - ADC0_0:
        access: rw
        description: Select ADC0_0
        lsb: 0
        reset_value: '0'
        width: 1
    - ADC0_1:
        access: rw
        description: Select ADC0_1
        lsb: 1
        reset_value: '0'
        width: 1
    - ADC0_2:
        access: rw
        description: Select ADC0_2
        lsb: 2
        reset_value: '0'
        width: 1
    - ADC0_3:
        access: rw
        description: Select ADC0_3
        lsb: 3
        reset_value: '0'
        width: 1
    - ADC0_4:
        access: rw
        description: Select ADC0_4
        lsb: 4
        reset_value: '0'
        width: 1
    - ADC0_5:
        access: rw
        description: Select ADC0_5
        lsb: 5
        reset_value: '0'
        width: 1
    - ADC0_6:
        access: rw
        description: Select ADC0_6
        lsb: 6
        reset_value: '0'
        width: 1
- SCU_ENAIO1:
    fields: !!omap
    - ADC1_0:
        access: rw
        description: Select ADC1_0
        lsb: 0
        reset_value: '0'
        width: 1
    - ADC1_1:
        access: rw
        description: Select ADC1_1
        lsb: 1
        reset_value: '0'
        width: 1
    - ADC1_2:
        access: rw
        description: Select ADC1_2
        lsb: 2
        reset_value: '0'
        width: 1
    - ADC1_3:
        access: rw
        description: Select ADC1_3
        lsb: 3
        reset_value: '0'
        width: 1
    - ADC1_4:
        access: rw
        description: Select ADC1_4
        lsb: 4
        reset_value: '0'
        width: 1
    - ADC1_5:
        access: rw
        description: Select ADC1_5
        lsb: 5
        reset_value: '0'
        width: 1
    - ADC1_6:
        access: rw
        description: Select ADC1_6
        lsb: 6
        reset_value: '0'
        width: 1
    - ADC1_7:
        access: rw
        description: Select ADC1_7
        lsb: 7
        reset_value: '0'
        width: 1
- SCU_ENAIO2:
    fields: !!omap
    - DAC:
        access: rw
        description: Select DAC
        lsb: 0
        reset_value: '0'
        width: 1
    - BG:
        access: rw
        description: Select band gap output
        lsb: 4
        reset_value: '0'
        width: 1
- SCU_EMCDELAYCLK:
    fields: !!omap
    - CLK_DELAY:
        access: rw
        description: EMC_CLKn SDRAM clock output delay
        lsb: 0
        reset_value: '0'
        width: 16
- SCU_PINTSEL0:
    fields: !!omap
    - INTPIN0:
        access: ''
        description: pin number for interrupt 0 source
        lsb: 0
        reset_value: '0'
        width: 5
    - PORTSEL0:
        access: ''
        description: port for interrupt 0 source
        lsb: 5
        reset_value: '0'
        width: 3
    - INTPIN1:
        access: ''
        description: pin number for interrupt 1 source
        lsb: 8
        reset_value: '0'
        width: 5
    - PORTSEL1:
        access: ''
        description: port for interrupt 1 source
        lsb: 13
        reset_value: '0'
        width: 3
    - INTPIN2:
        access: ''
        description: pin number for interrupt 2 source
        lsb: 16
        reset_value: '0'
        width: 5
    - PORTSEL2:
        access: ''
        description: port for interrupt 2 source
        lsb: 21
        reset_value: '0'
        width: 3
    - INTPIN3:
        access: ''
        description: pin number for interrupt 3 source
        lsb: 24
        reset_value: '0'
        width: 5
    - PORTSEL3:
        access: ''
        description: port for interrupt 3 source
        lsb: 29
        reset_value: '0'
        width: 3
- SCU_PINTSEL1:
    fields: !!omap
    - INTPIN4:
        access: ''
        description: pin number for interrupt 4 source
        lsb: 0
        reset_value: '0'
        width: 5
    - PORTSEL4:
        access: ''
        description: port for interrupt 4 source
        lsb: 5
        reset_value: '0'
        width: 3
    - INTPIN5:
        access: ''
        description: pin number for interrupt 5 source
        lsb: 8
        reset_value: '0'
        width: 5
    - PORTSEL5:
        access: ''
        description: port for interrupt 5 source
        lsb: 13
        reset_value: '0'
        width: 3
    - INTPIN6:
        access: ''
        description: pin number for interrupt 6 source
        lsb: 16
        reset_value: '0'
        width: 5
    - PORTSEL6:
        access: ''
        description: port for interrupt 6 source
        lsb: 21
        reset_value: '0'
        width: 3
    - INTPIN7:
        access: ''
        description: pin number for interrupt 7 source
        lsb: 24
        reset_value: '0'
        width: 5
    - PORTSEL7:
        access: ''
        description: port for interrupt 7 source
        lsb: 29
        reset_value: '0'
        width: 3