25dc3a9b4b
doc: efm32: i2c: tag for doxygen
...
Includes a stub .c file until there are some APIs
2019-06-25 21:15:19 +00:00
4c01e47aed
doc: efm32: emu: tag for doxygen properly
...
Requires a stub .c file to make the common files be included until we
build some APIs.
2019-06-25 21:15:19 +00:00
764fbed9c8
doc: efm32: dac: fix up mising tags on common file
2019-06-25 21:15:19 +00:00
790d624230
doc: efm32: burtc: tag properly for doxyen
...
includes a stub .c file until there are APIs defined.
2019-06-25 21:15:19 +00:00
aa99aba7d3
doc: efm32: prs: properly tag for doxygen
2019-06-25 21:15:19 +00:00
46514e75c0
doc: efm32: dma: tag headers properly
2019-06-25 21:15:19 +00:00
7e2cd050aa
doc: efm32: acmp: document, and include via peripheral_apis
...
Requires a stub .c file as it has common includes with out any common
code (yet)
2019-06-22 01:38:20 +00:00
0626f6f75d
doc: efm32: adc: enable peripheral_apis style
2019-06-22 01:38:20 +00:00
ae777bb920
doc: efm32: timer: enable peripheral_apis style
2019-06-22 01:38:20 +00:00
c8b8285446
doc: efm32: dac: enable peripheral_apis documentation
2019-06-22 01:38:20 +00:00
35657bdb61
doc: efm32: wdog: enable documentation via peripheral_apis
2019-06-22 01:38:20 +00:00
093edfb881
doc: efm32: cmu: move to peripheral_apis
...
Was completely undocumented before. Just needed different tagging so it
could be picked up.
No attempt at this stage of sharing more code between the cmu modules.
2019-06-22 01:38:20 +00:00
9bc432474b
doc: efm32: include gpio_common
...
gpio_common was built, but wasn't picked up by any documentation.
Use the peripheral_apis style from stm32, but try out the #pragma once
style. Downside is you don't get warnings if you include an sub layer
.h file. Upsides are
* no ifdef/endif blocks
* no /**@cond*/ /**@endcond*/ blocks
* that's enough win!
2019-06-22 01:38:20 +00:00
6d74262bf4
doc: efm32: define peripheral_apis groups
...
Nothing is _in_ these groups yet, but define them so we can start
filling them out. Follows the stm32 family style.
2019-06-22 01:38:20 +00:00
92b4b5a12f
doc: efm32: fix typos in family/group names
2019-06-22 01:38:14 +00:00
f121c8c8f0
.gitignore: ignore autogenerated include/libopencmsis/swm050/
2019-06-17 22:34:15 +00:00
2d0d29d946
doc: stm32l1: timer: fix params, missing groupings
2019-06-17 22:33:32 +00:00
7d344b187d
stm32: dma: add dma_set_channel_request to ease dma cselr usage.
2019-06-17 11:44:44 +00:00
eb0bc099f4
stm32l0: dma: include dma_cselr, present on l0x1-2-3.
2019-06-17 11:44:44 +00:00
e06898d9a4
stm32: dma: cselr: factorize register definition.
...
F09x and L4 share the same cselr register, as well as some L0s, factorize
definitions in a new shared header and add helpers.
fyi, that register allows to redefine dma channel peripheral mapping - see
device datasheet for mapping tables.
2019-06-17 11:44:44 +00:00
19f1160ad1
doc: stm32: timer: remove redundant groupings and consistent names
2019-06-16 18:17:06 +00:00
0b0a4de7c2
doc: stm32l0: fix doxygen groupings.
...
Makes some @ingroup directives redundant.
2019-06-16 18:02:41 +00:00
594c354068
stm32: l0: timer/lptimer: doc+
...
better doc for l0 lptimer registers, add mask.
2019-06-16 09:48:34 +02:00
ab1b0c1a5e
stm32g0: exti doc fixup
2019-06-13 12:04:58 +02:00
8173fb7249
stm32g0: add timer.
...
Only tim2/3/7/14 have been really tested yet - but the others should
work as well.
2019-06-13 12:04:58 +02:00
74526f00cc
stm32g0: add crc.
...
Regular crc-v2 peripheral, except that CRC_IDR is now 32bit wide - but
not used.
2019-06-13 12:04:58 +02:00
38006c3c82
stm32g0: add rng.
...
Regular rng peripheral, with one additional bit : clock error detection
apparently available on l4 chips). Curiously, Clock error detection is
_disabled_ when bit is set, but bit is cleared by default, so peripheral
/ clock error detection behaves like all other chips..
NB: RNG need proper rcc_ccicr_rngsel bits set to work, no clock is set by
default. Note also that on that chip fRNGCLK must be higher than fHCLK/32
2019-06-13 12:04:58 +02:00
5a349d3ab6
stm32g0: add i2c.
...
Regular i2c peripheral.
Partially tested as i had no i2c slave on hand, but i can see i2c on my scope..
2019-06-13 12:04:58 +02:00
ba3b50a4ad
stm32g0: add spi.
...
classic "common" spi + frf bit spi peripheral.
As for i2c, i could only check signals on scope, no spi slave to check, but looks ok.
2019-06-13 11:56:20 +02:00
a51ecb4719
stm32g0: add usart.
2019-06-13 11:56:20 +02:00
bb98d0755c
stm32g0: add iwdg.
...
regular v2 iwdg.
2019-06-13 11:07:53 +02:00
3d422a930f
stm32l4: add common DAC support
...
Replace the DAC1_BASE style, only used on l4 with the standard DAC_BASE
used on all other targets.
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
2019-06-12 23:25:22 +00:00
9f58ad4393
doc: fix trivial missing trailers or typos
2019-06-12 23:16:58 +00:00
55c899c93b
doc: stm32l0: rcc: add groups requested by existing docs
...
And cleanse the arguments to all match the docs.
2019-06-12 23:06:28 +00:00
7b6ca4be6b
doc: stm32l0: rcc: add groups and tags for bus prescalers
2019-06-12 23:06:28 +00:00
a2681b3122
doc: stm32f4: crypto trivial closing tag fix
2019-06-12 23:06:27 +00:00
502593ca6f
doc: stm32: exti-v1: fix conditionals, add registers
...
Fixes some missing definitions. cond/endcond is hard to get right
sometimes!
2019-06-12 23:06:22 +00:00
867bd164eb
doc:stm32: usart: fix grouping and heirarchy of base addrs
...
They were always landing on the top level, or not even present.
2019-06-12 23:06:22 +00:00
cfdb9b7856
doc: stm32f0: rcc: add groups and tags for bus prescalers
2019-06-12 23:06:22 +00:00
e8f03b4615
doc: usbd: Add missing / incorrect parameters.
...
Just basic documentation to clear up errors for starters.
2019-06-12 23:06:22 +00:00
121d854841
doc: stm32: crc-v2 fix up markup for doxygen
...
Eliminates errors, fixes groupings, adds missing groupings.
2019-06-12 23:06:22 +00:00
7c0320bf21
doc: stm32g0: rcc: add groupings for periph resets
2019-06-12 23:06:22 +00:00
4129d89637
doc: stm32f7: rcc: add groupings for periph resets
2019-06-12 23:06:22 +00:00
5d3f13c40e
doc: stm32f4: rcc: add groupings for periph resets
2019-06-12 22:56:38 +00:00
64893177ed
doc: stm32f3: rcc: add groupings for periph resets
2019-06-12 22:56:38 +00:00
5ba8d94b81
doc: stm32l4: rcc: add groupings for periph resets
...
As we did with f2, use a parent grouping to contain the different sets
of APB1 fields.
2019-06-12 22:56:38 +00:00
e6e1c239e4
doc: stm32l0: rcc: add groupings for periph resets
2019-06-12 22:56:38 +00:00
da3466057b
doc: stm32f2: rcc: add groupings for periph resets
...
We use a parent grouping to make the generic "AHB" groups work, even
though F2 and many later families have AHB1, AHB2 and AHB3
2019-06-12 22:56:34 +00:00
21a0c1178c
doc: stm32l1: rcc: add groupings for periph resets
2019-06-12 21:56:13 +00:00
c7ce1ddd1a
doc: stm32f0: rcc: add groupings for periph resets
...
As done earlier for other families, makes the doxygen linking working
properly.
2019-06-12 21:56:13 +00:00
Karl Palsson