5e1bcaa582
gpio.c, vector.c updated for LPC43xx
2012-05-22 13:55:50 -06:00
9439ce9d69
new lib/lpc43xx, starting with copy of lpc17xx
2012-05-22 10:59:27 -06:00
3a3c306ee3
#include fix
2012-05-22 10:39:29 -06:00
95224dbc5e
finished gpio.h and memorymap.h changes for LPC43xx but still much to fill in
2012-05-22 10:38:49 -06:00
ba35602e3d
started gpio.h lpc43xx changes
2012-05-21 22:39:21 -06:00
b6d1dc06d1
started include/lpc43xx with copy of lpc17xx
2012-05-21 22:38:24 -06:00
9c36782b6d
Added support for the SDIO interface of the stm32 family.
...
Register definition from the Datasheets; not tested in real hardware.
2012-04-30 00:22:56 +02:00
3596075ee0
Fixed the linker scripts to be the way Tomaz Solc proposed.
...
Something went wrong when cherrypicking his commits in the pull request.
Sorry about that. :(
2012-04-25 17:34:07 +02:00
3b20a5e34e
Removed the load address statement from the .bss section.
...
Otherwise the linker will complain: "section has both a load address and
a load region"
2012-04-24 09:34:39 +02:00
bf65589183
Support for exception handling in linker scripts.
...
This is needed even in plain C when 64 bit variable (e.g. long long int)
arithmetic is used. For example it is required when newlib is compiled with
--enable-newlib-io-long-long.
Conflicts:
lib/stm32/f1/libopencm3_stm32f1.ld
lib/stm32/f2/libopencm3_stm32f2.ld
2012-04-24 09:16:22 +02:00
c3038bc876
Added rcc.h include, needed for osc_t.
2012-04-24 09:08:49 +02:00
5510e1fe3b
Wait for writes to finish upon exiting RTC config
...
This fixes race condition when rtc_get_counter_val() call immediately follows
rtc_set_counter_val().
2012-04-24 09:06:32 +02:00
0d50b97ed5
Correct DMA_CCR_MSIZE and PSIZE bit masks. Thanks Tomas Solic.
2012-04-20 21:16:23 -07:00
b97c59e462
Initial implementation of DAC registers for stm32 by Felix Held
2012-04-20 21:08:38 -07:00
b8086b4ee2
Merge remote-tracking branch 'gsmcmullin/timer_input'
2012-04-20 16:41:16 -07:00
8820277f09
Added functions for configuring timers in slave mode.
2012-04-08 14:12:21 +12:00
a8ec86a527
Added functions for timer input capture polarity and enable/disable.
2012-04-08 13:55:16 +12:00
4b041697f4
Added convenience function for timer input selection.
2012-04-08 11:56:42 +12:00
a62473fbdf
Added convenience funcions for timer input capture filter and prescaler.
2012-04-08 11:11:52 +12:00
567faa9b61
Corrected parameters of timer_set_mode() to u32.
2012-04-07 20:31:56 +12:00
3be6cd8f76
Corrected bit definitions for capture/compare input selection.
...
Thanks to Linux Casassa.
2012-04-07 09:01:39 +12:00
66c5f91a87
Implemented gpio_clear() for LPC17xx.
2012-03-27 16:42:36 -06:00
f7bf15343d
Produced build system for Blueboard-LPC1768-H miniblink.
2012-03-27 08:55:19 -06:00
bf2b8aad2f
Added a bunch of register definitions and gpio_set() to LPC17xx gpio.
2012-03-26 16:43:43 -06:00
fa1c6bc632
Successfully compiled and ran miniblink.c for the Blueboard-LPC1768-H.
2012-03-22 16:22:22 -07:00
caade97299
Created vector.c by example. Added reset_handler entry to linker script.
2012-03-22 16:22:22 -07:00
9eb77c9fd7
Wrote miniblink.c for Blueboard-LPC1768-H, cleaned up gpio.h.
2012-03-22 16:22:22 -07:00
968557dfbb
Copy-pasted linker script from LPC13xx to LPC17XX. Set up the ram and
...
rom regions for the Blueboard-LPC1768-H.
2012-03-22 16:22:22 -07:00
82f89c414a
Started to set up GPIO registers.
2012-03-22 16:22:21 -07:00
cec41eb0c4
Filled in the APB0 memory map for the lpc17xx. Also set values for the
...
GPIO on AHB.
2012-03-22 16:22:21 -07:00
60788fd9d2
Started porting to LPC17xx. Created file stubs and started conversion.
2012-03-22 16:22:21 -07:00
404353b1aa
- Add FSMC helper macros. IMO FSMC_BTR_ACCMOD aren't much use, but I left them in case someone uses them.
...
- FSMC_BASE is already in memorymap.h so don't define it here.
2012-03-22 15:43:07 -07:00
5a463f03e1
Cast PERIPH_BASE to unsigned otherwise certain operations result in build problems (overflow signed type).
2012-03-22 15:41:43 -07:00
f76e99c98d
Add mask for SWJ bits.
...
(These are write only)
2012-03-22 15:41:19 -07:00
a30fc96c59
Revert "Fix setting alternate port functions on the STM32F2."
...
This was also fixed in ac29b654a987ea496ca72433f17e73
2012-03-21 20:19:36 -07:00
87ea496ca7
Revert "Fix setting alternate port functions on the STM32F4."
...
This was also fixed in ac29b654a9e11185d47d
2012-03-21 20:16:10 -07:00
26de4cb9d6
Constand value for resetting CAN_TDTxR was too big. Fixed.
2012-03-19 23:09:18 -07:00
ec34e21ead
Changed parameter size for trigger enable.
2012-03-19 20:20:05 -07:00
451a5e227d
Started some cleanup in the ADC headers and convenience code.
2012-03-19 17:38:24 -07:00
4fbd42148a
Added basic exception handling to the stm32 linker scripts. Thanks Mike Smith!
2012-03-18 22:59:31 -07:00
4e26104c18
Fixed position of PSIZE bits, thanks to Patrick for spotting this.
2012-03-17 16:17:40 -07:00
06d6f3e0e6
Made spi_init_master ignore CRC and SPE bits.
2012-03-14 21:00:53 -07:00
b7875d0230
Added dma based usart IO example.
2012-03-14 13:17:43 -07:00
aaa0158221
Fixed operation order for dma bit calculations.
2012-03-13 12:18:28 -07:00
1b7cd12f20
Added irq usart example for lisa/m 2.0
2012-03-12 00:01:48 -07:00
b41987dc7a
Added blocking usart printf for lisa/m 2.0
2012-03-11 23:55:24 -07:00
22706613d9
Added usart irq example for lisa/m 2.0
2012-03-11 23:26:28 -07:00
7e9425bdac
Added usart example to lisa/m 2.0
2012-03-11 23:12:26 -07:00
7907b29113
Fix search-replace left-over.
2012-03-03 00:46:07 +01:00
789ae97212
Some additional LGPL3+ license change cleanups.
...
Changed the license to LGPL3+ for some makefiles that got ommited in the
previous big patch commit.
Corrected a find and replace error in a linker file.
2012-03-02 15:39:15 -08:00
Michael Ossmann