Add a simple USART example project which sends some bytes.
This commit is contained in:
Uwe Hermann
parent
c6ec621b1a
commit
d20c3454fa
|
|
@ -25,7 +25,7 @@ ifneq ($(V),1)
|
|||
Q := @
|
||||
endif
|
||||
|
||||
all: miniblink fancyblink
|
||||
all: miniblink fancyblink usart
|
||||
|
||||
miniblink:
|
||||
@printf " BUILD miniblink\n"
|
||||
|
|
@ -35,11 +35,17 @@ fancyblink:
|
|||
@printf " BUILD fancyblink\n"
|
||||
$(Q)$(MAKE) -C fancyblink
|
||||
|
||||
usart:
|
||||
@printf " BUILD usart\n"
|
||||
$(Q)$(MAKE) -C usart
|
||||
|
||||
clean:
|
||||
@printf " CLEAN miniblink\n"
|
||||
$(Q)$(MAKE) -C miniblink clean
|
||||
@printf " CLEAN fancyblink\n"
|
||||
$(Q)$(MAKE) -C fancyblink clean
|
||||
@printf " CLEAN usart\n"
|
||||
$(Q)$(MAKE) -C usart clean
|
||||
|
||||
.PHONY: miniblink fancyblink clean
|
||||
.PHONY: miniblink fancyblink usart clean
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,89 @@
|
|||
##
|
||||
## This file is part of the libopenstm32 project.
|
||||
##
|
||||
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
||||
##
|
||||
## This program is free software: you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation, either version 3 of the License, or
|
||||
## (at your option) any later version.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
## You should have received a copy of the GNU General Public License
|
||||
## along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
##
|
||||
|
||||
BINARY = usart
|
||||
|
||||
# PREFIX ?= arm-none-eabi
|
||||
PREFIX ?= arm-elf
|
||||
CC = $(PREFIX)-gcc
|
||||
LD = $(PREFIX)-ld
|
||||
OBJCOPY = $(PREFIX)-objcopy
|
||||
OBJDUMP = $(PREFIX)-objdump
|
||||
# Uncomment this line if you want to use the installed (not local) library.
|
||||
# TOOLCHAIN_DIR = `dirname \`which $(CC)\``/../$(PREFIX)
|
||||
TOOLCHAIN_DIR = ../..
|
||||
CFLAGS = -O0 -g -Wall -Wextra -I$(TOOLCHAIN_DIR)/include -fno-common \
|
||||
-mcpu=cortex-m3 -mthumb
|
||||
LDSCRIPT = $(BINARY).ld
|
||||
LDFLAGS = -L$(TOOLCHAIN_DIR)/lib -T$(LDSCRIPT) -nostartfiles
|
||||
OBJS = $(BINARY).o
|
||||
OPENOCD = openocd
|
||||
|
||||
# Be silent per default, but 'make V=1' will show all compiler calls.
|
||||
ifneq ($(V),1)
|
||||
Q := @
|
||||
NULL := 2>/dev/null
|
||||
endif
|
||||
|
||||
all: images
|
||||
|
||||
images: $(BINARY)
|
||||
@printf " OBJCOPY $(BINARY).bin\n"
|
||||
$(Q)$(OBJCOPY) -Obinary $(BINARY) $(BINARY).bin
|
||||
@printf " OBJCOPY $(BINARY).hex\n"
|
||||
$(Q)$(OBJCOPY) -Oihex $(BINARY) $(BINARY).hex
|
||||
@printf " OBJCOPY $(BINARY).srec\n"
|
||||
$(Q)$(OBJCOPY) -Osrec $(BINARY) $(BINARY).srec
|
||||
@printf " OBJDUMP $(BINARY).list\n"
|
||||
$(Q)$(OBJDUMP) -S $(BINARY) > $(BINARY).list
|
||||
|
||||
$(BINARY): $(OBJS) $(LDSCRIPT)
|
||||
@printf " LD $(subst $(shell pwd)/,,$(@))\n"
|
||||
$(Q)$(LD) $(LDFLAGS) -o $(BINARY) $(OBJS) -lopenstm32
|
||||
|
||||
%.o: %.c Makefile
|
||||
@printf " CC $(subst $(shell pwd)/,,$(@))\n"
|
||||
$(Q)$(CC) $(CFLAGS) -o $@ -c $<
|
||||
|
||||
clean:
|
||||
@printf " CLEAN $(subst $(shell pwd)/,,$(OBJS))\n"
|
||||
$(Q)rm -f *.o
|
||||
@printf " CLEAN $(BINARY)\n"
|
||||
$(Q)rm -f $(BINARY)
|
||||
@printf " CLEAN $(BINARY).bin\n"
|
||||
$(Q)rm -f $(BINARY).bin
|
||||
@printf " CLEAN $(BINARY).hex\n"
|
||||
$(Q)rm -f $(BINARY).hex
|
||||
@printf " CLEAN $(BINARY).srec\n"
|
||||
$(Q)rm -f $(BINARY).srec
|
||||
@printf " CLEAN $(BINARY).list\n"
|
||||
$(Q)rm -f $(BINARY).list
|
||||
|
||||
flash: images
|
||||
@printf " FLASH $(BINARY).bin\n"
|
||||
@# IMPORTANT: Don't use "resume", only "reset" will work correctly!
|
||||
$(Q)$(OPENOCD) -f interface/jtagkey-tiny.cfg \
|
||||
-f board/olimex_stm32_h103.cfg \
|
||||
-c "init" -c "reset halt" \
|
||||
-c "flash write_image erase $(BINARY).bin 0x08000000" \
|
||||
-c "reset" \
|
||||
-c "shutdown" $(NULL)
|
||||
|
||||
.PHONY: images clean
|
||||
|
||||
|
|
@ -0,0 +1,48 @@
|
|||
------------------------------------------------------------------------------
|
||||
README
|
||||
------------------------------------------------------------------------------
|
||||
|
||||
This example program sends some characters on USART3 on the ST STM32-based
|
||||
Olimex STM32-H103 eval board (see http://olimex.com/dev/stm32-h103.html
|
||||
for details).
|
||||
|
||||
The terminal settings for the receiving device/PC are 38400 8n1.
|
||||
|
||||
|
||||
Building
|
||||
--------
|
||||
|
||||
$ make
|
||||
|
||||
Running 'make' on the top-level libopenstm32 directory will automatically
|
||||
also build this example. Or you can build the library "manually" and
|
||||
then run 'make' in this directory.
|
||||
|
||||
You may want to override the toolchain (e.g., arm-elf or arm-none-eabi):
|
||||
|
||||
$ PREFIX=arm-none-eabi make
|
||||
|
||||
For a more verbose build you can use
|
||||
|
||||
$ make V=1
|
||||
|
||||
|
||||
Flashing
|
||||
--------
|
||||
|
||||
You can flash the generated code on the STM32-H103 board using OpenOCD:
|
||||
|
||||
$ make flash
|
||||
|
||||
Or you can do the same manually via:
|
||||
|
||||
$ openocd -f interface/jtagkey-tiny.cfg -f board/olimex_stm32_h103.cfg
|
||||
$ telnet localhost 4444
|
||||
> init
|
||||
> reset halt
|
||||
> flash write_image erase usart.bin 0x08000000
|
||||
> reset
|
||||
|
||||
Replace the "jtagkey-tiny.cfg" with whatever JTAG device you are using, and/or
|
||||
replace "olimex_stm32_h103.cfg" with your respective board config file.
|
||||
|
||||
|
|
@ -0,0 +1,101 @@
|
|||
/*
|
||||
* This file is part of the libopenstm32 project.
|
||||
*
|
||||
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <libopenstm32.h>
|
||||
|
||||
void clock_setup(void)
|
||||
{
|
||||
/* Select HSI as SYSCLK source. */
|
||||
rcc_set_sysclk_source(SW_SYSCLKSEL_HSICLK);
|
||||
|
||||
/* Set the PLL multiplication factor to 9. */
|
||||
rcc_set_pll_multiplication_factor(PLLMUL_PLL_CLK_MUL9);
|
||||
|
||||
/* Select HSI/2 as PLL source. */
|
||||
rcc_set_pll_source(PLLSRC_HSI_CLK_DIV2);
|
||||
|
||||
rcc_set_pllxtpre(PLLXTPRE_HSE_CLK_DIV2);
|
||||
|
||||
/* Enable PLL oscillator and wait for it to stabilize. */
|
||||
rcc_osc_on(PLL);
|
||||
rcc_wait_for_osc_ready(PLL);
|
||||
|
||||
/* Select PLL as SYSCLK source. */
|
||||
rcc_set_sysclk_source(SW_SYSCLKSEL_PLLCLK);
|
||||
}
|
||||
|
||||
void usart_setup(void)
|
||||
{
|
||||
/* Enable clocks for GPIO port B (for GPIO_USART_TX) and USART3. */
|
||||
rcc_enable_peripheral_clock(&RCC_APB2ENR, IOPBEN);
|
||||
rcc_enable_peripheral_clock(&RCC_APB1ENR, USART3EN);
|
||||
|
||||
/* Setup GPIO pin GPIO_USART_TX/GPIO10 on GPIO port B for transmit. */
|
||||
gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_50_MHZ,
|
||||
GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO_USART_TX);
|
||||
|
||||
/* Setup UART parameters. */
|
||||
usart_set_baudrate(USART3, 38400);
|
||||
usart_set_databits(USART3, 8);
|
||||
usart_set_stopbits(USART3, STOPBITS_1);
|
||||
usart_set_mode(USART3, MODE_TX);
|
||||
usart_set_parity(USART3, PARITY_NONE);
|
||||
usart_set_flow_control(USART3, FLOWCONTROL_NONE);
|
||||
|
||||
/* Finally enable the USART. */
|
||||
usart_enable(USART3);
|
||||
}
|
||||
|
||||
void gpio_setup(void)
|
||||
{
|
||||
/* Enable GPIOC clock. */
|
||||
rcc_enable_peripheral_clock(&RCC_APB2ENR, IOPCEN);
|
||||
|
||||
/* Set GPIO12 (in GPIO port C) to 'output push-pull'. */
|
||||
gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_2_MHZ,
|
||||
GPIO_CNF_OUTPUT_PUSHPULL, GPIO12);
|
||||
}
|
||||
|
||||
int main(void)
|
||||
{
|
||||
int i, j = 0, c = 0;
|
||||
|
||||
clock_setup();
|
||||
gpio_setup();
|
||||
usart_setup();
|
||||
|
||||
/* Blink the LED (PC12) on the board with every transmitted byte. */
|
||||
while (1) {
|
||||
gpio_toggle(GPIOC, GPIO12); /* LED on/off */
|
||||
usart_send(USART3, c + '0'); /* Send one byte on USART3. */
|
||||
c = (c == 9) ? 0 : c + 1; /* Increment c. */
|
||||
if ((j++ % 80) == 0) { /* Newline after line full. */
|
||||
usart_send(USART3, '\r');
|
||||
usart_send(USART3, '\n');
|
||||
}
|
||||
for (i = 0; i < 80000; i++); /* Wait (needs -O0 CFLAGS). */
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
u32 *vector_table[2] __attribute__ ((section(".vectors"))) = {
|
||||
(u32 *)0x20000800, /* Use 2 KB stack (0x800 bytes). */
|
||||
(u32 *)main, /* Use main() as reset vector for now. */
|
||||
};
|
||||
|
|
@ -0,0 +1,31 @@
|
|||
/*
|
||||
* This file is part of the libopenstm32 project.
|
||||
*
|
||||
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* Linker script for Olimex STM32-H103 (STM32F103RBT6, 128K flash, 20K RAM). */
|
||||
|
||||
/* Define memory regions. */
|
||||
MEMORY
|
||||
{
|
||||
rom (rx) : ORIGIN = 0x00000000, LENGTH = 128K
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K
|
||||
}
|
||||
|
||||
/* Include the common ld script from libopenstm32. */
|
||||
INCLUDE libopenstm32.ld
|
||||
|
||||
Loading…
Reference in New Issue