i2c support added.
Most of the changes went to i2c_common_all.h file. F3 is considerably different than all the other in i2c.
This commit is contained in:
Federico Ruiz Ugalde
Piotr Esden-Tempski
parent
b6bae46b71
commit
be841154a9
|
|
@ -71,6 +71,347 @@ specific memorymap.h header before including this header file.*/
|
|||
#define I2C1_OAR2 I2C_OAR2(I2C1)
|
||||
#define I2C2_OAR2 I2C_OAR2(I2C2)
|
||||
|
||||
#ifdef STM32F3
|
||||
|
||||
/**@{*/
|
||||
|
||||
/* Timing register (I2Cx_TIMINGR) */
|
||||
#define I2C_TIMINGR(i2c_base) MMIO32(i2c_base + 0x10)
|
||||
#define I2C1_TIMINGR I2C_TIMINGR(I2C1)
|
||||
#define I2C2_TIMINGR I2C_TIMINGR(I2C2)
|
||||
|
||||
/* Timeout register (I2Cx_TIMEOUTR) */
|
||||
#define I2C_TIMEOUTR(i2c_base) MMIO32(i2c_base + 0x14)
|
||||
#define I2C1_TIMEOUTR I2C_TIMEOUTR(I2C1)
|
||||
#define I2C2_TIMEOUTR I2C_TIMEOUTR(I2C2)
|
||||
|
||||
/* Interrupt and Status register (I2Cx_ISR) */
|
||||
#define I2C_ISR(i2c_base) MMIO32(i2c_base + 0x18)
|
||||
#define I2C1_ISR I2C_ISR(I2C1)
|
||||
#define I2C2_ISR I2C_ISR(I2C2)
|
||||
|
||||
/* Interrupt clear register (I2Cx_ICR) */
|
||||
#define I2C_ICR(i2c_base) MMIO32(i2c_base + 0x1C)
|
||||
#define I2C1_ICR I2C_ICR(I2C1)
|
||||
#define I2C2_ICR I2C_ICR(I2C2)
|
||||
|
||||
/* PEC register (I2Cx_PECR) */
|
||||
#define I2C_PECR(i2c_base) MMIO32(i2c_base + 0x20)
|
||||
#define I2C1_PECR I2C_PECR(I2C1)
|
||||
#define I2C2_PECR I2C_PECR(I2C2)
|
||||
|
||||
/* Receive data register (I2Cx_RXDR) */
|
||||
#define I2C_RXDR(i2c_base) MMIO32(i2c_base + 0x24)
|
||||
#define I2C1_RXDR I2C_RXDR(I2C1)
|
||||
#define I2C2_RXDR I2C_RXDR(I2C2)
|
||||
|
||||
/* Transmit data register (I2Cx_TXDR) */
|
||||
#define I2C_TXDR(i2c_base) MMIO32(i2c_base + 0x28)
|
||||
#define I2C1_TXDR I2C_TXDR(I2C1)
|
||||
#define I2C2_TXDR I2C_TXDR(I2C2)
|
||||
|
||||
|
||||
/* --- I2Cx_CR1 values ----------------------------------------------------- */
|
||||
|
||||
/* PECEN: PEC enable */
|
||||
#define I2C_CR1_PECEN (1 << 23)
|
||||
|
||||
/* ALERTEN: SMBus alert enable */
|
||||
#define I2C_CR1_ALERTEN (1 << 22)
|
||||
|
||||
/* SMBDEN: SMBus Device Default address enable */
|
||||
#define I2C_CR1_SMBDEN (1 << 21)
|
||||
|
||||
/* SMBHEN: SMBus Host address enable */
|
||||
#define I2C_CR1_SMBHEN (1 << 20)
|
||||
|
||||
/* GCEN: General call enable */
|
||||
#define I2C_CR1_GCEN (1 << 19)
|
||||
|
||||
/* WUPEN: Wakeup from STOP enable */
|
||||
#define I2C_CR1_WUPEN (1 << 18)
|
||||
|
||||
/* NOSTRETCH: Clock stretching disable */
|
||||
#define I2C_CR1_NOSTRETCH (1 << 17)
|
||||
|
||||
/* SBC: Slave byte control */
|
||||
#define I2C_CR1_SBC (1 << 16)
|
||||
|
||||
/* RXDMAEN: DMA reception requests enable */
|
||||
#define I2C_CR1_RXDMAEN (1 << 15)
|
||||
|
||||
/* TXDMAEN: DMA transmission requests enable */
|
||||
#define I2C_CR1_TXDMAEN (1 << 14)
|
||||
|
||||
/* ANFOFF: Analog noise filter OFF */
|
||||
#define I2C_CR1_ANFOFF (1 << 12)
|
||||
|
||||
/* DNF[3:0]: Digital noise filter */
|
||||
#define I2C_CR1_DNF_DISABLED (0x0 << 8)
|
||||
#define I2C_CR1_DNF_UP_1_TI2CCLK (0x1 << 8)
|
||||
#define I2C_CR1_DNF_UP_2_TI2CCLK (0x2 << 8)
|
||||
#define I2C_CR1_DNF_UP_3_TI2CCLK (0x3 << 8)
|
||||
#define I2C_CR1_DNF_UP_4_TI2CCLK (0x4 << 8)
|
||||
#define I2C_CR1_DNF_UP_5_TI2CCLK (0x5 << 8)
|
||||
#define I2C_CR1_DNF_UP_6_TI2CCLK (0x6 << 8)
|
||||
#define I2C_CR1_DNF_UP_7_TI2CCLK (0x7 << 8)
|
||||
#define I2C_CR1_DNF_UP_8_TI2CCLK (0x8 << 8)
|
||||
#define I2C_CR1_DNF_UP_9_TI2CCLK (0x9 << 8)
|
||||
#define I2C_CR1_DNF_UP_10_TI2CCLK (0xA << 8)
|
||||
#define I2C_CR1_DNF_UP_11_TI2CCLK (0xB << 8)
|
||||
#define I2C_CR1_DNF_UP_12_TI2CCLK (0xC << 8)
|
||||
#define I2C_CR1_DNF_UP_13_TI2CCLK (0xD << 8)
|
||||
#define I2C_CR1_DNF_UP_14_TI2CCLK (0xE << 8)
|
||||
#define I2C_CR1_DNF_UP_15_TI2CCLK (0xF << 8)
|
||||
|
||||
/* ERRIE: Error interrupts enable */
|
||||
#define I2C_CR1_ERRIE (1 << 7)
|
||||
|
||||
/* TCIE: Transfer Complete interrupt enable */
|
||||
#define I2C_CR1_TCIE (1 << 6)
|
||||
|
||||
/* STOPIE: STOP detection Interrupt enable */
|
||||
#define I2C_CR1_STOPIE (1 << 5)
|
||||
|
||||
/* NACKIE: Not acknowledge received Interrupt enable */
|
||||
#define I2C_CR1_NACKIE (1 << 4)
|
||||
|
||||
/* ADDRIE: Address match Interrupt enable (slave only) */
|
||||
#define I2C_CR1_DDRIE (1 << 3)
|
||||
|
||||
/* RXIE: RX Interrupt enable */
|
||||
#define I2C_CR1_RXIE (1 << 2)
|
||||
|
||||
/* TXIE: TX Interrupt enable */
|
||||
#define I2C_CR1_TXIE (1 << 1)
|
||||
|
||||
/* PE: Peripheral enable */
|
||||
#define I2C_CR1_PE (1 << 0)
|
||||
|
||||
|
||||
/* --- I2Cx_CR2 values ----------------------------------------------------- */
|
||||
|
||||
/* PECBYTE: Packet error checking byte */
|
||||
#define I2C_CR2_PECBYTE (1 << 26)
|
||||
|
||||
/* AUTOEND: Automatic end mode (master mode) */
|
||||
#define I2C_CR2_AUTOEND (1 << 25)
|
||||
|
||||
/* RELOAD: NBYTES reload mode */
|
||||
#define I2C_CR2_RELOAD (1 << 24)
|
||||
|
||||
/* NBYTES[7:0]: Number of bytes (23,16) */
|
||||
|
||||
/* NACK: NACK generation (slave mode) */
|
||||
#define I2C_CR2_NACK (1 << 15)
|
||||
|
||||
/* STOP: Stop generation (master mode) */
|
||||
#define I2C_CR2_STOP (1 << 14)
|
||||
|
||||
/* START: Start generation */
|
||||
#define I2C_CR2_START (1 << 13)
|
||||
|
||||
/* HEAD10R: 10-bit address header only read direction (master receiver mode) */
|
||||
#define I2C_CR2_HEAD10R (1 << 12)
|
||||
|
||||
/* ADD10: 10-bit addressing mode (master mode) */
|
||||
#define I2C_CR2_ADD10 (1 << 11)
|
||||
|
||||
/* RD_WRN: Transfer direction (master mode) */
|
||||
#define I2C_CR2_RD_WRN (1 << 10)
|
||||
|
||||
//preguntar
|
||||
|
||||
/* SADD[9:8]: Slave address bit 9:8 (master mode) */
|
||||
#define I2C_CR2_SADD1_7BIT (0x0 << 8)
|
||||
#define I2C_CR2_SADD1_10BIT (0x1 << 8)
|
||||
|
||||
/* SADD[7:1]: Slave address bit 7:1 (master mode) */
|
||||
#define I2C_CR2_SADD2_7BIT (0x0 << 1)
|
||||
#define I2C_CR2_SADD2_10BIT (0x1 << 1)
|
||||
|
||||
/* SADD0: Slave address bit 0 (master mode) */
|
||||
#define I2C_CR2_SADD0_7BIT (0 << 0)
|
||||
#define I2C_CR2_SADD0_10BIT (1 << 0)
|
||||
|
||||
|
||||
/* --- I2Cx_OAR1 values ---------------------------------------------------- */
|
||||
|
||||
/* OA1EN: Own Address 1 enable */
|
||||
#define I2C_OAR1_OA1EN_DISABLE (0x0 << 15)
|
||||
#define I2C_OAR1_OA1EN_ENABLE (0x1 <<15)
|
||||
|
||||
/* OA1MODE Own Address 1 10-bit mode */
|
||||
#define I2C_OAR1_OA1MODE (1 << 10)
|
||||
#define I2C_OAR1_OA1MODE_7BIT 0
|
||||
#define I2C_OAR1_OA1MODE_10BIT 1
|
||||
|
||||
//preguntar
|
||||
|
||||
/* OA1[9:8]: Interface address */
|
||||
|
||||
/* OA1[7:1]: Interface address */
|
||||
|
||||
/* OA1[0]: Interface address */
|
||||
#define I2C_OAR1_OA1 (1 << 10)
|
||||
#define I2C_OAR1_OA1_7BIT 0
|
||||
#define I2C_OAR1_OA1_10BIT 1
|
||||
|
||||
|
||||
/* --- I2Cx_OAR2 values ---------------------------------------------------- */
|
||||
|
||||
/* OA2EN: Own Address 2 enable */
|
||||
#define I2C_OAR2_OA2EN (1 << 15)
|
||||
|
||||
/* OA2MSK[2:0]: Own Address 2 masks */
|
||||
#define I2C_OAR2_OA2MSK_NO_MASK (0x0 << 8)
|
||||
#define I2C_OAR2_OA2MSK_OA2_7_OA2_2 (0x1 << 8)
|
||||
#define I2C_OAR2_OA2MSK_OA2_7_OA2_3 (0x2 << 8)
|
||||
#define I2C_OAR2_OA2MSK_OA2_7_OA2_4 (0x3 << 8)
|
||||
#define I2C_OAR2_OA2MSK_OA2_7_OA2_5 (0x4 << 8)
|
||||
#define I2C_OAR2_OA2MSK_OA2_7_OA2_6 (0x5 << 8)
|
||||
#define I2C_OAR2_OA2MSK_OA2_7 (0x6 << 8)
|
||||
#define I2C_OAR2_OA2MSK_NO_CMP (0x7 << 8)
|
||||
|
||||
/* OA2[7:1]: Interface address */
|
||||
|
||||
|
||||
/* --- I2Cx_TIMINGR values ---------------------------------------------------- */
|
||||
|
||||
//Not clear yet.
|
||||
/* PRESC[3:0]: Timing prescaler (31,28) */
|
||||
|
||||
/* SCLDEL[3:0]: Data setup time (23,20) */
|
||||
|
||||
/* SDADEL[3:0]: Data hold time (19,16) */
|
||||
|
||||
/* SCLH[7:0]: SCL high period (master mode) (15,8) */
|
||||
|
||||
/* SCLL[7:0]: SCL low period (master mode) (7,0) */
|
||||
|
||||
|
||||
/* --- I2Cx_TIEMOUTR values ---------------------------------------------------- */
|
||||
|
||||
/* TEXTEN: Extended clock timeout enable */
|
||||
#define I2C_TIEMOUTR_TEXTEN (1 << 31)
|
||||
|
||||
//Not clear yet.
|
||||
/* TIMEOUTB[11:0]: Bus timeout B */
|
||||
|
||||
/* TIMOUTEN: Clock timeout enable */
|
||||
#define I2C_TIEMOUTR_TIMOUTEN (1 << 15)
|
||||
|
||||
/* TIDLE: Idle clock timeout detection */
|
||||
#define I2C_TIEMOUTR_TIDLE_SCL_LOW (0x0 << 12)
|
||||
#define I2C_TIEMOUTR_TIDLE_SCL_SDA_HIGH (0x1 << 12)
|
||||
|
||||
//Not clear yet.
|
||||
/* TIMEOUTA[11:0]: Bus Timeout A */
|
||||
|
||||
|
||||
/* --- I2Cx_ISR values ---------------------------------------------------- */
|
||||
|
||||
/* Bits 31:24 Reserved, must be kept at reset value */
|
||||
|
||||
//Not clear yet.
|
||||
/* ADDCODE[6:0]: Address match code (Slave mode) */
|
||||
|
||||
/* DIR: Transfer direction (Slave mode) */
|
||||
#define I2C_ISR_DIR_READ (0x1 << 16)
|
||||
#define I2C_ISR_DIR_WRITE (0x0 << 16)
|
||||
|
||||
/* BUSY: Bus busy */
|
||||
#define I2C_ISR_BUSY (1 << 15)
|
||||
|
||||
/* ALERT: SMBus alert */
|
||||
#define I2C_ISR_ALERT (1 << 13)
|
||||
|
||||
/* TIMEOUT: Timeout or tLOW detection flag */
|
||||
#define I2C_ISR_TIMEOUT (1 << 12)
|
||||
|
||||
/* PECERR: PEC Error in reception */
|
||||
#define I2C_ISR_PECERR (1 << 11)
|
||||
|
||||
/* OVR: Overrun/Underrun (slave mode) */
|
||||
#define I2C_ISR_OVR (1 << 10)
|
||||
|
||||
/* ARLO: Arbitration lost */
|
||||
#define I2C_ISR_ARLO (1 << 9)
|
||||
|
||||
/* BERR: Bus error */
|
||||
#define I2C_ISR_BERR (1 << 8)
|
||||
|
||||
/* TCR: Transfer Complete Reload */
|
||||
#define I2C_ISR_TCR (1 << 7)
|
||||
|
||||
/* TC: Transfer Complete (master mode) */
|
||||
#define I2C_ISR_TC (1 << 6)
|
||||
|
||||
/* STOPF: Stop detection flag */
|
||||
#define I2C_ISR_STOPF (1 << 5)
|
||||
|
||||
/* NACKF: Not Acknowledge received flag */
|
||||
#define I2C_ISR_NACKF (1 << 4)
|
||||
|
||||
/* ADDR: Address matched (slave mode) */
|
||||
#define I2C_ISR_ADDR (1 << 3)
|
||||
|
||||
/* RXNE: Receive data register not empty (receivers) */
|
||||
#define I2C_ISR_RXNE (1 << 2)
|
||||
|
||||
/* TXIS: Transmit interrupt status (transmitters) */
|
||||
#define I2C_ISR_TXIS (1 << 1)
|
||||
|
||||
/* TXE: Transmit data register empty (transmitters) */
|
||||
#define I2C_ISR_TXE (1 << 0)
|
||||
|
||||
|
||||
/* --- I2Cx_ICR values ---------------------------------------------------- */
|
||||
|
||||
/* ALERTCF: Alert flag clear */
|
||||
#define I2C_ICR_ALERTCF (1 << 13)
|
||||
|
||||
/* TIMOUTCF: Timeout detection flag clear */
|
||||
#define I2C_ICR_TIMOUTCF (1 << 12)
|
||||
|
||||
/* PECCF: PEC Error flag clear */
|
||||
#define I2C_ICR_PECCF (1 << 11)
|
||||
|
||||
/* OVRCF: Overrun/Underrun flag clear */
|
||||
#define I2C_ICR_OVRCF (1 << 10)
|
||||
|
||||
/* ARLOCF: Arbitration Lost flag clear */
|
||||
#define I2C_ICR_ARLOCF (1 << 9)
|
||||
|
||||
/* BERRCF: Bus error flag clear */
|
||||
#define I2C_ICR_BERRCF (1 << 8)
|
||||
|
||||
/* STOPCF: Stop detection flag clear */
|
||||
#define I2C_ICR_STOPCF (1 << 5)
|
||||
|
||||
/* NACKCF: Not Acknowledge flag clear */
|
||||
#define I2C_ICR_NACKCF (1 << 4)
|
||||
|
||||
/* ADDRCF: Address Matched flag clear */
|
||||
#define I2C_ICR_ADDRCF (1 << 3)
|
||||
|
||||
|
||||
/* --- I2Cx_PECR values ---------------------------------------------------- */
|
||||
|
||||
/* PEC[7:0] Packet error checking register */
|
||||
|
||||
|
||||
/* --- I2Cx_RXDR values ---------------------------------------------------- */
|
||||
|
||||
/* RXDATA[7:0] 8-bit receive data */
|
||||
|
||||
|
||||
/* --- I2Cx_TXDR values ---------------------------------------------------- */
|
||||
|
||||
/* TXDATA[7:0] 8-bit transmit data */
|
||||
|
||||
#else
|
||||
|
||||
/* Data register (I2Cx_DR) */
|
||||
#define I2C_DR(i2c_base) MMIO32(i2c_base + 0x10)
|
||||
#define I2C1_DR I2C_DR(I2C1)
|
||||
|
|
@ -342,6 +683,8 @@ specific memorymap.h header before including this header file.*/
|
|||
* TRISE[5:0]: Maximum rise time in Fast/Standard mode (master mode)
|
||||
*/
|
||||
|
||||
#endif
|
||||
|
||||
/* --- I2C constant definitions -------------------------------------------- */
|
||||
|
||||
/****************************************************************************/
|
||||
|
|
@ -355,6 +698,17 @@ specific memorymap.h header before including this header file.*/
|
|||
|
||||
/* --- I2C function prototypes---------------------------------------------- */
|
||||
|
||||
/* void i2c_reset(uint32_t i2c); */
|
||||
/* void i2c_peripheral_enable(uint32_t i2c); */
|
||||
/* void i2c_peripheral_disable(uint32_t i2c); */
|
||||
/* void i2c_send_start(uint32_t i2c); */
|
||||
/* void i2c_send_stop(uint32_t i2c); */
|
||||
/* void i2c_clear_stop(uint32_t i2c); */
|
||||
/* void i2c_set_own_7bit_slave_address(uint32_t i2c, uint8_t slave); */
|
||||
/* void i2c_set_own_10bit_slave_address(uint32_t i2c, uint16_t slave); */
|
||||
/* void i2c_set_clock_frequency(uint32_t i2c, uint8_t freq); */
|
||||
/* void i2c_send_data(uint32_t i2c, uint8_t data); */
|
||||
|
||||
BEGIN_DECLS
|
||||
|
||||
void i2c_reset(uint32_t i2c);
|
||||
|
|
@ -365,13 +719,16 @@ void i2c_send_stop(uint32_t i2c);
|
|||
void i2c_clear_stop(uint32_t i2c);
|
||||
void i2c_set_own_7bit_slave_address(uint32_t i2c, uint8_t slave);
|
||||
void i2c_set_own_10bit_slave_address(uint32_t i2c, uint16_t slave);
|
||||
void i2c_set_clock_frequency(uint32_t i2c, uint8_t freq);
|
||||
void i2c_send_data(uint32_t i2c, uint8_t data);
|
||||
|
||||
#ifndef STM32F3
|
||||
|
||||
void i2c_set_fast_mode(uint32_t i2c);
|
||||
void i2c_set_standard_mode(uint32_t i2c);
|
||||
void i2c_set_clock_frequency(uint32_t i2c, uint8_t freq);
|
||||
void i2c_set_ccr(uint32_t i2c, uint16_t freq);
|
||||
void i2c_set_trise(uint32_t i2c, uint16_t trise);
|
||||
void i2c_send_7bit_address(uint32_t i2c, uint8_t slave, uint8_t readwrite);
|
||||
void i2c_send_data(uint32_t i2c, uint8_t data);
|
||||
uint8_t i2c_get_data(uint32_t i2c);
|
||||
void i2c_enable_interrupt(uint32_t i2c, uint32_t interrupt);
|
||||
void i2c_disable_interrupt(uint32_t i2c, uint32_t interrupt);
|
||||
|
|
@ -385,6 +742,8 @@ void i2c_disable_dma(uint32_t i2c);
|
|||
void i2c_set_dma_last_transfer(uint32_t i2c);
|
||||
void i2c_clear_dma_last_transfer(uint32_t i2c);
|
||||
|
||||
#endif
|
||||
|
||||
END_DECLS
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -0,0 +1,38 @@
|
|||
/** @defgroup i2c_defines I2C Defines
|
||||
|
||||
@brief <b>Defined Constants and Types for the STM32F4xx I2C </b>
|
||||
|
||||
@ingroup STM32F4xx_defines
|
||||
|
||||
@version 1.0.0
|
||||
|
||||
@date 12 October 2012
|
||||
|
||||
LGPL License Terms @ref lgpl_license
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file is part of the libopencm3 project.
|
||||
*
|
||||
* This library is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU Lesser General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public License
|
||||
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef LIBOPENCM3_I2C_H
|
||||
#define LIBOPENCM3_I2C_H
|
||||
|
||||
#include <libopencm3/stm32/memorymap.h>
|
||||
#include <libopencm3/stm32/common/i2c_common_all.h>
|
||||
|
||||
#endif
|
||||
|
||||
|
|
@ -21,6 +21,8 @@
|
|||
# include <libopencm3/stm32/f1/i2c.h>
|
||||
#elif defined(STM32F2)
|
||||
# include <libopencm3/stm32/f2/i2c.h>
|
||||
#elif defined(STM32F3)
|
||||
# include <libopencm3/stm32/f3/i2c.h>
|
||||
#elif defined(STM32F4)
|
||||
# include <libopencm3/stm32/f4/i2c.h>
|
||||
#elif defined(STM32L1)
|
||||
|
|
|
|||
|
|
@ -21,6 +21,8 @@
|
|||
# include <libopencm3/stm32/f1/rcc.h>
|
||||
#elif defined(STM32F2)
|
||||
# include <libopencm3/stm32/f2/rcc.h>
|
||||
#elif defined(STM32F3)
|
||||
# include <libopencm3/stm32/f3/rcc.h>
|
||||
#elif defined(STM32F4)
|
||||
# include <libopencm3/stm32/f4/rcc.h>
|
||||
#elif defined(STM32L1)
|
||||
|
|
|
|||
|
|
@ -100,7 +100,11 @@ when the current bus activity is completed.
|
|||
|
||||
void i2c_send_start(uint32_t i2c)
|
||||
{
|
||||
#ifdef STM32F3
|
||||
I2C_CR2(i2c) |= I2C_CR2_START;
|
||||
#else
|
||||
I2C_CR1(i2c) |= I2C_CR1_START;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
|
@ -114,7 +118,11 @@ mode, or simply release the bus if in Slave mode.
|
|||
|
||||
void i2c_send_stop(uint32_t i2c)
|
||||
{
|
||||
#ifdef STM32F3
|
||||
I2C_CR2(i2c) |= I2C_CR2_STOP;
|
||||
#else
|
||||
I2C_CR1(i2c) |= I2C_CR1_STOP;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
|
@ -126,7 +134,11 @@ Clear the "Send Stop" flag in the I2C config register
|
|||
*/
|
||||
void i2c_clear_stop(uint32_t i2c)
|
||||
{
|
||||
#ifdef STM32F3
|
||||
I2C_CR2(i2c) &= ~I2C_CR2_STOP;
|
||||
#else
|
||||
I2C_CR1(i2c) &= ~I2C_CR1_STOP;
|
||||
#endif
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
|
|
@ -141,7 +153,11 @@ This sets an address for Slave mode operation, in 7 bit form.
|
|||
void i2c_set_own_7bit_slave_address(uint32_t i2c, uint8_t slave)
|
||||
{
|
||||
I2C_OAR1(i2c) = (uint16_t)(slave << 1);
|
||||
#ifdef STM32F3
|
||||
I2C_OAR1(i2c) &= ~I2C_OAR1_OA1MODE;
|
||||
#else
|
||||
I2C_OAR1(i2c) &= ~I2C_OAR1_ADDMODE;
|
||||
#endif
|
||||
I2C_OAR1(i2c) |= (1 << 14); /* Datasheet: always keep 1 by software. */
|
||||
}
|
||||
|
||||
|
|
@ -158,9 +174,52 @@ This sets an address for Slave mode operation, in 10 bit form.
|
|||
|
||||
void i2c_set_own_10bit_slave_address(uint32_t i2c, uint16_t slave)
|
||||
{
|
||||
#ifdef STM32F3
|
||||
I2C_OAR1(i2c) = (uint16_t)(I2C_OAR1_OA1MODE | slave);
|
||||
#else
|
||||
I2C_OAR1(i2c) = (uint16_t)(I2C_OAR1_ADDMODE | slave);
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief I2C Set Peripheral Clock Frequency.
|
||||
|
||||
Set the peripheral clock frequency: 2MHz to 36MHz (the APB frequency). Note
|
||||
that this is <b> not </b> the I2C bus clock. This is set in conjunction with
|
||||
the Clock Control register to generate the Master bus clock, see @ref
|
||||
i2c_set_ccr
|
||||
|
||||
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
||||
@param[in] freq Unsigned int8. Clock Frequency Setting @ref i2c_clock.
|
||||
*/
|
||||
|
||||
void i2c_set_clock_frequency(uint32_t i2c, uint8_t freq)
|
||||
{
|
||||
uint16_t reg16;
|
||||
reg16 = I2C_CR2(i2c) & 0xffc0; /* Clear bits [5:0]. */
|
||||
reg16 |= freq;
|
||||
I2C_CR2(i2c) = reg16;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief I2C Send Data.
|
||||
|
||||
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
||||
@param[in] data Unsigned int8. Byte to send.
|
||||
*/
|
||||
|
||||
void i2c_send_data(uint32_t i2c, uint8_t data)
|
||||
{
|
||||
#if defined(STM32F3)
|
||||
I2C_TXDR(i2c) = data;
|
||||
#else
|
||||
I2C_DR(i2c) = data;
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifndef STM32F3
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief I2C Set Fast Mode.
|
||||
|
||||
|
|
@ -189,26 +248,6 @@ void i2c_set_standard_mode(uint32_t i2c)
|
|||
I2C_CCR(i2c) &= ~I2C_CCR_FS;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief I2C Set Peripheral Clock Frequency.
|
||||
|
||||
Set the peripheral clock frequency: 2MHz to 36MHz (the APB frequency). Note
|
||||
that this is <b> not </b> the I2C bus clock. This is set in conjunction with
|
||||
the Clock Control register to generate the Master bus clock, see @ref
|
||||
i2c_set_ccr
|
||||
|
||||
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
||||
@param[in] freq Unsigned int8. Clock Frequency Setting @ref i2c_clock.
|
||||
*/
|
||||
|
||||
void i2c_set_clock_frequency(uint32_t i2c, uint8_t freq)
|
||||
{
|
||||
uint16_t reg16;
|
||||
reg16 = I2C_CR2(i2c) & 0xffc0; /* Clear bits [5:0]. */
|
||||
reg16 |= freq;
|
||||
I2C_CR2(i2c) = reg16;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief I2C Set Bus Clock Frequency.
|
||||
|
||||
|
|
@ -264,18 +303,6 @@ void i2c_send_7bit_address(uint32_t i2c, uint8_t slave, uint8_t readwrite)
|
|||
I2C_DR(i2c) = (uint8_t)((slave << 1) | readwrite);
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief I2C Send Data.
|
||||
|
||||
@param[in] i2c Unsigned int32. I2C register base address @ref i2c_reg_base.
|
||||
@param[in] data Unsigned int8. Byte to send.
|
||||
*/
|
||||
|
||||
void i2c_send_data(uint32_t i2c, uint8_t data)
|
||||
{
|
||||
I2C_DR(i2c) = data;
|
||||
}
|
||||
|
||||
/*---------------------------------------------------------------------------*/
|
||||
/** @brief I2C Get Data.
|
||||
|
||||
|
|
@ -409,3 +436,5 @@ void i2c_clear_dma_last_transfer(uint32_t i2c)
|
|||
}
|
||||
|
||||
/**@}*/
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@ ARFLAGS = rcs
|
|||
|
||||
OBJS = rcc.o gpio.o flash.o
|
||||
|
||||
OBJS += gpio_common_all.o gpio_common_f234.o
|
||||
OBJS += gpio_common_all.o gpio_common_f234.o i2c_common_all.o
|
||||
|
||||
VPATH += ../../usb:../:../../cm3:../common
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,33 @@
|
|||
/** @defgroup i2c_file I2C
|
||||
|
||||
@ingroup STM32F3xx
|
||||
|
||||
@brief <b>libopencm3 STM32F3xx I2C</b>
|
||||
|
||||
@version 1.0.0
|
||||
|
||||
@date 15 October 2012
|
||||
|
||||
LGPL License Terms @ref lgpl_license
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file is part of the libopencm3 project.
|
||||
*
|
||||
* This library is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU Lesser General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This library is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU Lesser General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU Lesser General Public License
|
||||
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <libopencm3/stm32/i2c.h>
|
||||
#include <libopencm3/stm32/common/i2c_common_all.h>
|
||||
|
||||
Loading…
Reference in New Issue