Added a simple exti test using rising and falling trigger instead of sampling the gpio pin to determine the current state of the pin.
This commit is contained in:
parent
9cea5525f6
commit
51a3044232
|
@ -0,0 +1,23 @@
|
|||
##
|
||||
## This file is part of the libopencm3 project.
|
||||
##
|
||||
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
||||
##
|
||||
## This program is free software: you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation, either version 3 of the License, or
|
||||
## (at your option) any later version.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
## You should have received a copy of the GNU General Public License
|
||||
## along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
##
|
||||
|
||||
BINARY = exti_rising_falling
|
||||
|
||||
include ../../Makefile.include
|
||||
|
|
@ -0,0 +1,99 @@
|
|||
/*
|
||||
* This file is part of the libopencm3 project.
|
||||
*
|
||||
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>,
|
||||
* 2010 Piotr Esden-Tempski <piotr@esden.net>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <libopencm3/stm32/nvic.h>
|
||||
#include <libopencm3/stm32/rcc.h>
|
||||
#include <libopencm3/stm32/gpio.h>
|
||||
#include <libopencm3/stm32/exti.h>
|
||||
|
||||
#define FALLING 0
|
||||
#define RISING 1
|
||||
|
||||
u16 exti_direction = FALLING;
|
||||
|
||||
/* Set STM32 to 72 MHz. */
|
||||
void clock_setup(void)
|
||||
{
|
||||
rcc_clock_setup_in_hse_8mhz_out_72mhz();
|
||||
|
||||
}
|
||||
|
||||
void gpio_setup(void)
|
||||
{
|
||||
/* Enable GPIOC clock. */
|
||||
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPCEN);
|
||||
|
||||
/* Set GPIO12 (in GPIO port C) to 'output push-pull'. */
|
||||
gpio_set_mode(GPIOC, GPIO_MODE_OUTPUT_50_MHZ,
|
||||
GPIO_CNF_OUTPUT_PUSHPULL, GPIO12);
|
||||
}
|
||||
|
||||
void exti_setup(void)
|
||||
{
|
||||
/* Enable GPIOA clock. */
|
||||
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_IOPAEN);
|
||||
|
||||
/* Enable AFIO clock. */
|
||||
rcc_peripheral_enable_clock(&RCC_APB2ENR, RCC_APB2ENR_AFIOEN);
|
||||
|
||||
/* Enable EXTI0 interrupt */
|
||||
nvic_enable_irq(NVIC_EXTI0_IRQ);
|
||||
|
||||
/* Set GPIO0 (in GPIO port A) to 'input open-drain'. */
|
||||
gpio_set_mode(GPIOA, GPIO_MODE_INPUT,
|
||||
GPIO_CNF_INPUT_PULL_UPDOWN, GPIO0);
|
||||
gpio_set(GPIOA, GPIO0);
|
||||
|
||||
/* configure EXTI subsystem */
|
||||
exti_select_source(EXTI0, GPIOA);
|
||||
exti_direction = FALLING;
|
||||
exti_set_trigger(EXTI0, EXTI_TRIGGER_FALLING);
|
||||
exti_enable_request(EXTI0);
|
||||
}
|
||||
|
||||
void exti0_isr()
|
||||
{
|
||||
exti_reset_request(EXTI0);
|
||||
|
||||
if (exti_direction == FALLING) {
|
||||
gpio_set(GPIOC, GPIO12);
|
||||
exti_direction = RISING;
|
||||
exti_set_trigger(EXTI0, EXTI_TRIGGER_RISING);
|
||||
} else {
|
||||
gpio_clear(GPIOC, GPIO12);
|
||||
exti_direction = FALLING;
|
||||
exti_set_trigger(EXTI0, EXTI_TRIGGER_FALLING);
|
||||
}
|
||||
}
|
||||
|
||||
int main(void)
|
||||
{
|
||||
|
||||
clock_setup();
|
||||
gpio_setup();
|
||||
exti_setup();
|
||||
|
||||
/* Blink the LED (PC12) on the board. */
|
||||
while (1) {
|
||||
__asm("nop");
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
|
@ -0,0 +1,31 @@
|
|||
/*
|
||||
* This file is part of the libopencm3 project.
|
||||
*
|
||||
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* Linker script for Olimex STM32-H103 (STM32F103RBT6, 128K flash, 20K RAM). */
|
||||
|
||||
/* Define memory regions. */
|
||||
MEMORY
|
||||
{
|
||||
rom (rx) : ORIGIN = 0x08000000, LENGTH = 128K
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K
|
||||
}
|
||||
|
||||
/* Include the common ld script. */
|
||||
INCLUDE libopencm3_stm32.ld
|
||||
|
Loading…
Reference in New Issue