electronics
/
libopencm3
9
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
libopencm3/tests/gadget-zero/openocd.stm32f429i-disco.cfg

14 lines
401 B
INI
Raw Normal View History

tests: usb gadget0: Add stm32f429i-disco support The F429i board has the user USB OTG port connected to the HS capable OTG core, rather than the FS OTG core. It is still only operating in FS mode, as you need a ULPI phy to use HS mode.
2016-01-05 17:20:52 +00:00
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x4000
source [find target/stm32f4x.cfg]
tests: extract serials to optional local config Instead of having committed files containing a single developer's serials, use optional includes to include a local config file for each board. If you have only a single board connected, simply: $ make -f Makefile.<board> clean all flash If you have multiple boards connected, make sure to fill in the appropriate hla_serial in your openocd.<board>.local.cfg file, and then run the same commands.
2016-01-26 23:47:06 +00:00
source openocd.common.cfg
optional_local "openocd.stm32f429i-disco.local.cfg"
tests: usb gadget0: Add stm32f429i-disco support The F429i board has the user USB OTG port connected to the HS capable OTG core, rather than the FS OTG core. It is still only operating in FS mode, as you need a ULPI phy to use HS mode.
2016-01-05 17:20:52 +00:00
tpiu config internal swodump.stm32f429i-disco.log uart off 168000000
# Uncomment to reset on connect, for grabbing under WFI et al
reset_config srst_only srst_nogate
# reset_config srst_only srst_nogate connect_assert_srst