!!omap
- ATIMER_DOWNCOUNTER:
    fields: !!omap
    - CVAL:
        access: rw
        description: When equal to zero an interrupt is raised
        lsb: 0
        reset_value: '0'
        width: 16
- ATIMER_PRESET:
    fields: !!omap
    - PRESETVAL:
        access: rw
        description: Value loaded in DOWNCOUNTER when DOWNCOUNTER equals zero
        lsb: 0
        reset_value: '0'
        width: 16
- ATIMER_CLR_EN:
    fields: !!omap
    - CLR_EN:
        access: w
        description: Writing a 1 to this bit clears the interrupt enable bit in the
          ENABLE register
        lsb: 0
        reset_value: '0'
        width: 1
- ATIMER_SET_EN:
    fields: !!omap
    - SET_EN:
        access: w
        description: Writing a 1 to this bit sets the interrupt enable bit in the
          ENABLE register
        lsb: 0
        reset_value: '0'
        width: 1
- ATIMER_STATUS:
    fields: !!omap
    - STAT:
        access: r
        description: A 1 in this bit shows that the STATUS interrupt has been raised
        lsb: 0
        reset_value: '0'
        width: 1
- ATIMER_ENABLE:
    fields: !!omap
    - ENA:
        access: r
        description: A 1 in this bit shows that the STATUS interrupt has been enabled
          and that the STATUS interrupt request signal is asserted when STAT = 1 in
          the STATUS register
        lsb: 0
        reset_value: '0'
        width: 1
- ATIMER_CLR_STAT:
    fields: !!omap
    - CSTAT:
        access: w
        description: Writing a 1 to this bit clears the STATUS interrupt bit in the
          STATUS register
        lsb: 0
        reset_value: '0'
        width: 1
- ATIMER_SET_STAT:
    fields: !!omap
    - SSTAT:
        access: w
        description: Writing a 1 to this bit sets the STATUS interrupt bit in the
          STATUS register
        lsb: 0
        reset_value: '0'
        width: 1
