Harald Welte dcec482b43 | ||
---|---|---|
amr-breakout | ||
bgt-rpi | ||
clock-converter | ||
clock-generator | ||
dus-lmt-breakout | ||
e1-tap | ||
gtm900-breakout | ||
mpcie-breakout | ||
multivoltage-uart | ||
ncn8025-breakout | ||
ngff-breakout | ||
ngff-cardem | ||
ohm4-ocxo | ||
osmo-lea6t-gps | ||
osmo-nvs-gps | ||
rj45-jumper-box | ||
sc14dect-breakout | ||
sfp-breakout | ||
siu-clock-breakout | ||
yang/doc | ||
.gitignore | ||
README.md |
README.md
osmo-small-hardware - Various small Osmocom Hardware Projects
This repository contains a number of OSHW (open source hardware) designs. They are part of the Osmocom Open Source Mobile Communications project.
Most of the designs are done in EAGLE CAD; the schematics and board design files as well as the BOM are contained in this repository.
GIT Repository
You can clone from the official osmo-small-hardware repository using
git clone git://git.osmocom.org/osmo-small-hardware
git clone https://git.osmocom.org/osmo-small-hardware
There is a cgit interface at https://git.osmocom.org/osmo-small-hardware/
Contributing
Our coding standards are described at https://osmocom.org/projects/cellular-infrastructure/wiki/Coding_standards
We us a gerrit based patch submission/review process for managing contributions. Please see https://osmocom.org/projects/cellular-infrastructure/wiki/Gerrit for more details
clock-converter
The osmo-clock-conv is a small board for low-jitter conversion of a sine clock into a square clock, based around the LTC6957-4.
clock-generator
Osmocom Clock Generator board, using the Si5351C clock synthesizer to derive up to 8 different clocks from a single clock reference, such as a 10MHz GPS-DO or OCXO.
dus-lmt-breakout
This is a break-out board for the LMT port of Ericsson DUS-31/41 baseband units.
e1-tap
The Osmocom E1/T1 tap adapter allows you to tap into the communication of an E1/T1 line.
gtm900-breakout
Break-out board for the GTM900B Calypso based GSM cellular modem.
mpcie-breakout
This is a small break-out board for miniPCIe (mPCIe) type cellular / WWAN modems.
multivoltage-uart
ngff-breakout
This is a small break-out board for M.2 (NGFF) type cellular / WWAN modems.
ohm4-ocxo
osmo-lea6t-gps
Small evaluation board for the u-blox LEA6-T timing GPS receiver.
osmo-nvs-gps
Small evaluation board for the NVS GPS receiver.
rj45-jumper-box
A jumper box for RJ45 cables. Useful for the many different RS232 console pin-outs on RJ45.
rj45-switch
sc14dect-breakout
Small evaluation board for the SC15 DECT module
sfp-breakout + sfp-experimenter
Boards for playing with SFP transceivers
siu-clock-breakout
A break-out board for the clock/sync port on the Ericsson SIU-02