![David Brownell](/assets/img/avatar_default.png)
Support the camera connector on the OSK Mistral add-on board: - define muxing for both camera controllers - mux both of them for Mistral - teach ov9640 glue about mistral powerup/powerdown Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
576 lines
11 KiB
C
576 lines
11 KiB
C
/*
|
|
* linux/include/asm-arm/arch-omap/mux.h
|
|
*
|
|
* Table of the Omap register configurations for the FUNC_MUX and
|
|
* PULL_DWN combinations.
|
|
*
|
|
* Copyright (C) 2003 - 2005 Nokia Corporation
|
|
*
|
|
* Written by Tony Lindgren <tony.lindgren@nokia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
* NOTE: Please use the following naming style for new pin entries.
|
|
* For example, W8_1610_MMC2_DAT0, where:
|
|
* - W8 = ball
|
|
* - 1610 = 1510 or 1610, none if common for both 1510 and 1610
|
|
* - MMC2_DAT0 = function
|
|
*
|
|
* Change log:
|
|
* Added entry for the I2C interface. (02Feb 2004)
|
|
* Copyright (C) 2004 Texas Instruments
|
|
*
|
|
* Added entry for the keypad and uwire CS1. (09Mar 2004)
|
|
* Copyright (C) 2004 Texas Instruments
|
|
*
|
|
*/
|
|
|
|
#ifndef __ASM_ARCH_MUX_H
|
|
#define __ASM_ARCH_MUX_H
|
|
|
|
#define PU_PD_SEL_NA 0 /* No pu_pd reg available */
|
|
#define PULL_DWN_CTRL_NA 0 /* No pull-down control needed */
|
|
|
|
#ifdef CONFIG_OMAP_MUX_DEBUG
|
|
#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
|
|
.mux_reg = FUNC_MUX_CTRL_##reg, \
|
|
.mask_offset = mode_offset, \
|
|
.mask = mode,
|
|
|
|
#define PULL_REG(reg, bit, status) .pull_name = "PULL_DWN_CTRL_"#reg, \
|
|
.pull_reg = PULL_DWN_CTRL_##reg, \
|
|
.pull_bit = bit, \
|
|
.pull_val = status,
|
|
|
|
#define PU_PD_REG(reg, status) .pu_pd_name = "PU_PD_SEL_"#reg, \
|
|
.pu_pd_reg = PU_PD_SEL_##reg, \
|
|
.pu_pd_val = status,
|
|
|
|
#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
|
|
.mux_reg = OMAP730_IO_CONF_##reg, \
|
|
.mask_offset = mode_offset, \
|
|
.mask = mode,
|
|
|
|
#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \
|
|
.pull_reg = OMAP730_IO_CONF_##reg, \
|
|
.pull_bit = bit, \
|
|
.pull_val = status,
|
|
|
|
#else
|
|
|
|
#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
|
|
.mask_offset = mode_offset, \
|
|
.mask = mode,
|
|
|
|
#define PULL_REG(reg, bit, status) .pull_reg = PULL_DWN_CTRL_##reg, \
|
|
.pull_bit = bit, \
|
|
.pull_val = status,
|
|
|
|
#define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \
|
|
.pu_pd_val = status,
|
|
|
|
#define MUX_REG_730(reg, mode_offset, mode) \
|
|
.mux_reg = OMAP730_IO_CONF_##reg, \
|
|
.mask_offset = mode_offset, \
|
|
.mask = mode,
|
|
|
|
#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \
|
|
.pull_bit = bit, \
|
|
.pull_val = status,
|
|
|
|
#endif /* CONFIG_OMAP_MUX_DEBUG */
|
|
|
|
#define MUX_CFG(desc, mux_reg, mode_offset, mode, \
|
|
pull_reg, pull_bit, pull_status, \
|
|
pu_pd_reg, pu_pd_status, debug_status) \
|
|
{ \
|
|
.name = desc, \
|
|
.debug = debug_status, \
|
|
MUX_REG(mux_reg, mode_offset, mode) \
|
|
PULL_REG(pull_reg, pull_bit, pull_status) \
|
|
PU_PD_REG(pu_pd_reg, pu_pd_status) \
|
|
},
|
|
|
|
|
|
/*
|
|
* OMAP730 has a slightly different config for the pin mux.
|
|
* - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
|
|
* not the FUNC_MUX_CTRL_x regs from hardware.h
|
|
* - for pull-up/down, only has one enable bit which is is in the same register
|
|
* as mux config
|
|
*/
|
|
#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \
|
|
pull_bit, pull_status, debug_status)\
|
|
{ \
|
|
.name = desc, \
|
|
.debug = debug_status, \
|
|
MUX_REG_730(mux_reg, mode_offset, mode) \
|
|
PULL_REG_730(mux_reg, pull_bit, pull_status) \
|
|
PU_PD_REG(NA, 0) \
|
|
},
|
|
|
|
#define MUX_CFG_24XX(desc, reg_offset, mode, \
|
|
pull_en, pull_mode, dbg) \
|
|
{ \
|
|
.name = desc, \
|
|
.debug = dbg, \
|
|
.mux_reg = reg_offset, \
|
|
.mask = mode, \
|
|
.pull_val = pull_en, \
|
|
.pu_pd_val = pull_mode, \
|
|
},
|
|
|
|
|
|
#define PULL_DISABLED 0
|
|
#define PULL_ENABLED 1
|
|
|
|
#define PULL_DOWN 0
|
|
#define PULL_UP 1
|
|
|
|
struct pin_config {
|
|
char *name;
|
|
unsigned char busy;
|
|
unsigned char debug;
|
|
|
|
const char *mux_reg_name;
|
|
const unsigned int mux_reg;
|
|
const unsigned char mask_offset;
|
|
const unsigned char mask;
|
|
|
|
const char *pull_name;
|
|
const unsigned int pull_reg;
|
|
const unsigned char pull_val;
|
|
const unsigned char pull_bit;
|
|
|
|
const char *pu_pd_name;
|
|
const unsigned int pu_pd_reg;
|
|
const unsigned char pu_pd_val;
|
|
};
|
|
|
|
enum omap730_index {
|
|
/* OMAP 730 keyboard */
|
|
E2_730_KBR0,
|
|
J7_730_KBR1,
|
|
E1_730_KBR2,
|
|
F3_730_KBR3,
|
|
D2_730_KBR4,
|
|
C2_730_KBC0,
|
|
D3_730_KBC1,
|
|
E4_730_KBC2,
|
|
F4_730_KBC3,
|
|
E3_730_KBC4,
|
|
|
|
/* USB */
|
|
AA17_730_USB_DM,
|
|
W16_730_USB_PU_EN,
|
|
W17_730_USB_VBUSI,
|
|
};
|
|
|
|
enum omap1xxx_index {
|
|
/* UART1 (BT_UART_GATING)*/
|
|
UART1_TX = 0,
|
|
UART1_RTS,
|
|
|
|
/* UART2 (COM_UART_GATING)*/
|
|
UART2_TX,
|
|
UART2_RX,
|
|
UART2_CTS,
|
|
UART2_RTS,
|
|
|
|
/* UART3 (GIGA_UART_GATING) */
|
|
UART3_TX,
|
|
UART3_RX,
|
|
UART3_CTS,
|
|
UART3_RTS,
|
|
UART3_CLKREQ,
|
|
UART3_BCLK, /* 12MHz clock out */
|
|
Y15_1610_UART3_RTS,
|
|
|
|
/* PWT & PWL */
|
|
PWT,
|
|
PWL,
|
|
|
|
/* USB master generic */
|
|
R18_USB_VBUS,
|
|
R18_1510_USB_GPIO0,
|
|
W4_USB_PUEN,
|
|
W4_USB_CLKO,
|
|
W4_USB_HIGHZ,
|
|
W4_GPIO58,
|
|
|
|
/* USB1 master */
|
|
USB1_SUSP,
|
|
USB1_SEO,
|
|
W13_1610_USB1_SE0,
|
|
USB1_TXEN,
|
|
USB1_TXD,
|
|
USB1_VP,
|
|
USB1_VM,
|
|
USB1_RCV,
|
|
USB1_SPEED,
|
|
R13_1610_USB1_SPEED,
|
|
R13_1710_USB1_SE0,
|
|
|
|
/* USB2 master */
|
|
USB2_SUSP,
|
|
USB2_VP,
|
|
USB2_TXEN,
|
|
USB2_VM,
|
|
USB2_RCV,
|
|
USB2_SEO,
|
|
USB2_TXD,
|
|
|
|
/* OMAP-1510 GPIO */
|
|
R18_1510_GPIO0,
|
|
R19_1510_GPIO1,
|
|
M14_1510_GPIO2,
|
|
|
|
/* OMAP1610 GPIO */
|
|
P18_1610_GPIO3,
|
|
Y15_1610_GPIO17,
|
|
|
|
/* OMAP-1710 GPIO */
|
|
R18_1710_GPIO0,
|
|
V2_1710_GPIO10,
|
|
N21_1710_GPIO14,
|
|
W15_1710_GPIO40,
|
|
|
|
/* MPUIO */
|
|
MPUIO2,
|
|
N15_1610_MPUIO2,
|
|
MPUIO4,
|
|
MPUIO5,
|
|
T20_1610_MPUIO5,
|
|
W11_1610_MPUIO6,
|
|
V10_1610_MPUIO7,
|
|
W11_1610_MPUIO9,
|
|
V10_1610_MPUIO10,
|
|
W10_1610_MPUIO11,
|
|
E20_1610_MPUIO13,
|
|
U20_1610_MPUIO14,
|
|
E19_1610_MPUIO15,
|
|
|
|
/* MCBSP2 */
|
|
MCBSP2_CLKR,
|
|
MCBSP2_CLKX,
|
|
MCBSP2_DR,
|
|
MCBSP2_DX,
|
|
MCBSP2_FSR,
|
|
MCBSP2_FSX,
|
|
|
|
/* MCBSP3 */
|
|
MCBSP3_CLKX,
|
|
|
|
/* Misc ballouts */
|
|
BALLOUT_V8_ARMIO3,
|
|
N20_HDQ,
|
|
|
|
/* OMAP-1610 MMC2 */
|
|
W8_1610_MMC2_DAT0,
|
|
V8_1610_MMC2_DAT1,
|
|
W15_1610_MMC2_DAT2,
|
|
R10_1610_MMC2_DAT3,
|
|
Y10_1610_MMC2_CLK,
|
|
Y8_1610_MMC2_CMD,
|
|
V9_1610_MMC2_CMDDIR,
|
|
V5_1610_MMC2_DATDIR0,
|
|
W19_1610_MMC2_DATDIR1,
|
|
R18_1610_MMC2_CLKIN,
|
|
|
|
/* OMAP-1610 External Trace Interface */
|
|
M19_1610_ETM_PSTAT0,
|
|
L15_1610_ETM_PSTAT1,
|
|
L18_1610_ETM_PSTAT2,
|
|
L19_1610_ETM_D0,
|
|
J19_1610_ETM_D6,
|
|
J18_1610_ETM_D7,
|
|
|
|
/* OMAP16XX GPIO */
|
|
P20_1610_GPIO4,
|
|
V9_1610_GPIO7,
|
|
W8_1610_GPIO9,
|
|
N20_1610_GPIO11,
|
|
N19_1610_GPIO13,
|
|
P10_1610_GPIO22,
|
|
V5_1610_GPIO24,
|
|
AA20_1610_GPIO_41,
|
|
W19_1610_GPIO48,
|
|
M7_1610_GPIO62,
|
|
V14_16XX_GPIO37,
|
|
R9_16XX_GPIO18,
|
|
L14_16XX_GPIO49,
|
|
|
|
/* OMAP-1610 uWire */
|
|
V19_1610_UWIRE_SCLK,
|
|
U18_1610_UWIRE_SDI,
|
|
W21_1610_UWIRE_SDO,
|
|
N14_1610_UWIRE_CS0,
|
|
P15_1610_UWIRE_CS3,
|
|
N15_1610_UWIRE_CS1,
|
|
|
|
/* OMAP-1610 SPI */
|
|
U19_1610_SPIF_SCK,
|
|
U18_1610_SPIF_DIN,
|
|
P20_1610_SPIF_DIN,
|
|
W21_1610_SPIF_DOUT,
|
|
R18_1610_SPIF_DOUT,
|
|
N14_1610_SPIF_CS0,
|
|
N15_1610_SPIF_CS1,
|
|
T19_1610_SPIF_CS2,
|
|
P15_1610_SPIF_CS3,
|
|
|
|
/* OMAP-1610 Flash */
|
|
L3_1610_FLASH_CS2B_OE,
|
|
M8_1610_FLASH_CS2B_WE,
|
|
|
|
/* First MMC */
|
|
MMC_CMD,
|
|
MMC_DAT1,
|
|
MMC_DAT2,
|
|
MMC_DAT0,
|
|
MMC_CLK,
|
|
MMC_DAT3,
|
|
|
|
/* OMAP-1710 MMC CMDDIR and DATDIR0 */
|
|
M15_1710_MMC_CLKI,
|
|
P19_1710_MMC_CMDDIR,
|
|
P20_1710_MMC_DATDIR0,
|
|
|
|
/* OMAP-1610 USB0 alternate pin configuration */
|
|
W9_USB0_TXEN,
|
|
AA9_USB0_VP,
|
|
Y5_USB0_RCV,
|
|
R9_USB0_VM,
|
|
V6_USB0_TXD,
|
|
W5_USB0_SE0,
|
|
V9_USB0_SPEED,
|
|
V9_USB0_SUSP,
|
|
|
|
/* USB2 */
|
|
W9_USB2_TXEN,
|
|
AA9_USB2_VP,
|
|
Y5_USB2_RCV,
|
|
R9_USB2_VM,
|
|
V6_USB2_TXD,
|
|
W5_USB2_SE0,
|
|
|
|
/* 16XX UART */
|
|
R13_1610_UART1_TX,
|
|
V14_16XX_UART1_RX,
|
|
R14_1610_UART1_CTS,
|
|
AA15_1610_UART1_RTS,
|
|
R9_16XX_UART2_RX,
|
|
L14_16XX_UART3_RX,
|
|
|
|
/* I2C OMAP-1610 */
|
|
I2C_SCL,
|
|
I2C_SDA,
|
|
|
|
/* Keypad */
|
|
F18_1610_KBC0,
|
|
D20_1610_KBC1,
|
|
D19_1610_KBC2,
|
|
E18_1610_KBC3,
|
|
C21_1610_KBC4,
|
|
G18_1610_KBR0,
|
|
F19_1610_KBR1,
|
|
H14_1610_KBR2,
|
|
E20_1610_KBR3,
|
|
E19_1610_KBR4,
|
|
N19_1610_KBR5,
|
|
|
|
/* Power management */
|
|
T20_1610_LOW_PWR,
|
|
|
|
/* MCLK Settings */
|
|
V5_1710_MCLK_ON,
|
|
V5_1710_MCLK_OFF,
|
|
R10_1610_MCLK_ON,
|
|
R10_1610_MCLK_OFF,
|
|
|
|
/* CompactFlash controller */
|
|
P11_1610_CF_CD2,
|
|
R11_1610_CF_IOIS16,
|
|
V10_1610_CF_IREQ,
|
|
W10_1610_CF_RESET,
|
|
W11_1610_CF_CD1,
|
|
|
|
/* parallel camera */
|
|
J15_1610_CAM_LCLK,
|
|
J18_1610_CAM_D7,
|
|
J19_1610_CAM_D6,
|
|
J14_1610_CAM_D5,
|
|
K18_1610_CAM_D4,
|
|
K19_1610_CAM_D3,
|
|
K15_1610_CAM_D2,
|
|
K14_1610_CAM_D1,
|
|
L19_1610_CAM_D0,
|
|
L18_1610_CAM_VS,
|
|
L15_1610_CAM_HS,
|
|
M19_1610_CAM_RSTZ,
|
|
Y15_1610_CAM_OUTCLK,
|
|
|
|
/* serial camera */
|
|
H19_1610_CAM_EXCLK,
|
|
Y12_1610_CCP_CLKP,
|
|
W13_1610_CCP_CLKM,
|
|
W14_1610_CCP_DATAP,
|
|
Y14_1610_CCP_DATAM,
|
|
|
|
};
|
|
|
|
enum omap24xx_index {
|
|
/* 24xx I2C */
|
|
M19_24XX_I2C1_SCL,
|
|
L15_24XX_I2C1_SDA,
|
|
J15_24XX_I2C2_SCL,
|
|
H19_24XX_I2C2_SDA,
|
|
|
|
/* 24xx Menelaus interrupt */
|
|
W19_24XX_SYS_NIRQ,
|
|
|
|
/* 24xx clock */
|
|
W14_24XX_SYS_CLKOUT,
|
|
|
|
/* 24xx GPMC chipselects, wait pin monitoring */
|
|
E2_GPMC_NCS2,
|
|
L2_GPMC_NCS7,
|
|
L3_GPMC_WAIT0,
|
|
N7_GPMC_WAIT1,
|
|
M1_GPMC_WAIT2,
|
|
P1_GPMC_WAIT3,
|
|
|
|
/* 242X McBSP */
|
|
Y15_24XX_MCBSP2_CLKX,
|
|
R14_24XX_MCBSP2_FSX,
|
|
W15_24XX_MCBSP2_DR,
|
|
V15_24XX_MCBSP2_DX,
|
|
|
|
/* 24xx GPIO */
|
|
M21_242X_GPIO11,
|
|
P21_242X_GPIO12,
|
|
AA10_242X_GPIO13,
|
|
AA6_242X_GPIO14,
|
|
AA4_242X_GPIO15,
|
|
Y11_242X_GPIO16,
|
|
AA12_242X_GPIO17,
|
|
AA8_242X_GPIO58,
|
|
Y20_24XX_GPIO60,
|
|
W4__24XX_GPIO74,
|
|
M15_24XX_GPIO92,
|
|
J15_24XX_GPIO99,
|
|
V14_24XX_GPIO117,
|
|
P14_24XX_GPIO125,
|
|
|
|
/* 242x DBG GPIO */
|
|
V4_242X_GPIO49,
|
|
W2_242X_GPIO50,
|
|
U4_242X_GPIO51,
|
|
V3_242X_GPIO52,
|
|
V2_242X_GPIO53,
|
|
V6_242X_GPIO53,
|
|
T4_242X_GPIO54,
|
|
Y4_242X_GPIO54,
|
|
T3_242X_GPIO55,
|
|
U2_242X_GPIO56,
|
|
|
|
/* 24xx external DMA requests */
|
|
AA10_242X_DMAREQ0,
|
|
AA6_242X_DMAREQ1,
|
|
E4_242X_DMAREQ2,
|
|
G4_242X_DMAREQ3,
|
|
D3_242X_DMAREQ4,
|
|
E3_242X_DMAREQ5,
|
|
|
|
P20_24XX_TSC_IRQ,
|
|
|
|
/* UART3 */
|
|
K15_24XX_UART3_TX,
|
|
K14_24XX_UART3_RX,
|
|
|
|
/* MMC/SDIO */
|
|
G19_24XX_MMC_CLKO,
|
|
H18_24XX_MMC_CMD,
|
|
F20_24XX_MMC_DAT0,
|
|
H14_24XX_MMC_DAT1,
|
|
E19_24XX_MMC_DAT2,
|
|
D19_24XX_MMC_DAT3,
|
|
F19_24XX_MMC_DAT_DIR0,
|
|
E20_24XX_MMC_DAT_DIR1,
|
|
F18_24XX_MMC_DAT_DIR2,
|
|
E18_24XX_MMC_DAT_DIR3,
|
|
G18_24XX_MMC_CMD_DIR,
|
|
H15_24XX_MMC_CLKI,
|
|
|
|
/* Full speed USB */
|
|
J20_24XX_USB0_PUEN,
|
|
J19_24XX_USB0_VP,
|
|
K20_24XX_USB0_VM,
|
|
J18_24XX_USB0_RCV,
|
|
K19_24XX_USB0_TXEN,
|
|
J14_24XX_USB0_SE0,
|
|
K18_24XX_USB0_DAT,
|
|
|
|
N14_24XX_USB1_SE0,
|
|
W12_24XX_USB1_SE0,
|
|
P15_24XX_USB1_DAT,
|
|
R13_24XX_USB1_DAT,
|
|
W20_24XX_USB1_TXEN,
|
|
P13_24XX_USB1_TXEN,
|
|
V19_24XX_USB1_RCV,
|
|
V12_24XX_USB1_RCV,
|
|
|
|
AA10_24XX_USB2_SE0,
|
|
Y11_24XX_USB2_DAT,
|
|
AA12_24XX_USB2_TXEN,
|
|
AA6_24XX_USB2_RCV,
|
|
AA4_24XX_USB2_TLLSE0,
|
|
|
|
/* Keypad GPIO*/
|
|
T19_24XX_KBR0,
|
|
R19_24XX_KBR1,
|
|
V18_24XX_KBR2,
|
|
M21_24XX_KBR3,
|
|
E5__24XX_KBR4,
|
|
M18_24XX_KBR5,
|
|
R20_24XX_KBC0,
|
|
M14_24XX_KBC1,
|
|
H19_24XX_KBC2,
|
|
V17_24XX_KBC3,
|
|
P21_24XX_KBC4,
|
|
L14_24XX_KBC5,
|
|
N19_24XX_KBC6,
|
|
|
|
/* 24xx Menelaus Keypad GPIO */
|
|
B3__24XX_KBR5,
|
|
AA4_24XX_KBC2,
|
|
B13_24XX_KBC6,
|
|
};
|
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
/* setup pin muxing in Linux */
|
|
extern int omap1_mux_init(void);
|
|
extern int omap2_mux_init(void);
|
|
extern int omap_mux_register(struct pin_config * pins, unsigned long size);
|
|
extern int omap_cfg_reg(unsigned long reg_cfg);
|
|
#else
|
|
/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
|
|
static inline int omap1_mux_init(void) { return 0; }
|
|
static inline int omap2_mux_init(void) { return 0; }
|
|
static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
|
|
#endif
|
|
|
|
#endif
|