![Anand Gadiyar](/assets/img/avatar_default.png)
s/seperate/separate Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Jiri Kosina <trivial@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
4058 lines
117 KiB
C
4058 lines
117 KiB
C
/******************************************************************************
|
|
|
|
(c) Copyright 2008, RealTEK Technologies Inc. All Rights Reserved.
|
|
|
|
Module: hal8192sphy.c
|
|
|
|
Note: Merge 92SE/SU PHY config as below
|
|
1. BB register R/W API
|
|
2. RF register R/W API
|
|
3. Initial BB/RF/MAC config by reading BB/MAC/RF txt.
|
|
3. Power setting API
|
|
4. Channel switch API
|
|
5. Initial gain switch API.
|
|
6. Other BB/MAC/RF API.
|
|
|
|
Function: PHY: Extern function, phy: local function
|
|
|
|
Export: PHY_FunctionName
|
|
|
|
Abbrev: NONE
|
|
|
|
History:
|
|
Data Who Remark
|
|
08/08/2008 MHC 1. Port from 9x series phycfg.c
|
|
2. Reorganize code arch and ad description.
|
|
3. Collect similar function.
|
|
4. Seperate extern/local API.
|
|
08/12/2008 MHC We must merge or move USB PHY relative function later.
|
|
10/07/2008 MHC Add IQ calibration for PHY.(Only 1T2R mode now!!!)
|
|
11/06/2008 MHC Add TX Power index PG file to config in 0xExx register
|
|
area to map with EEPROM/EFUSE tx pwr index.
|
|
|
|
******************************************************************************/
|
|
#include "r8192U.h"
|
|
#include "r8192U_dm.h"
|
|
#include "r8192S_rtl6052.h"
|
|
|
|
#include "r8192S_hw.h"
|
|
#include "r8192S_phy.h"
|
|
#include "r8192S_phyreg.h"
|
|
#include "r8192SU_HWImg.h"
|
|
|
|
#include "ieee80211/dot11d.h"
|
|
|
|
/*---------------------------Define Local Constant---------------------------*/
|
|
/* Channel switch:The size of command tables for switch channel*/
|
|
#define MAX_PRECMD_CNT 16
|
|
#define MAX_RFDEPENDCMD_CNT 16
|
|
#define MAX_POSTCMD_CNT 16
|
|
#define MAX_DOZE_WAITING_TIMES_9x 64
|
|
|
|
/*------------------------Define local variable------------------------------*/
|
|
// 2004-05-11
|
|
|
|
static u32
|
|
phy_CalculateBitShift(u32 BitMask);
|
|
static RT_STATUS
|
|
phy_ConfigMACWithHeaderFile(struct net_device* dev);
|
|
static void
|
|
phy_InitBBRFRegisterDefinition(struct net_device* dev);
|
|
static RT_STATUS
|
|
phy_BB8192S_Config_ParaFile(struct net_device* dev);
|
|
static RT_STATUS
|
|
phy_ConfigBBWithHeaderFile(struct net_device* dev,u8 ConfigType);
|
|
static bool
|
|
phy_SetRFPowerState8192SU(struct net_device* dev,RT_RF_POWER_STATE eRFPowerState);
|
|
void
|
|
SetBWModeCallback8192SUsbWorkItem(struct net_device *dev);
|
|
void
|
|
SetBWModeCallback8192SUsbWorkItem(struct net_device *dev);
|
|
void
|
|
SwChnlCallback8192SUsbWorkItem(struct net_device *dev );
|
|
static void
|
|
phy_FinishSwChnlNow(struct net_device* dev,u8 channel);
|
|
static bool
|
|
phy_SwChnlStepByStep(
|
|
struct net_device* dev,
|
|
u8 channel,
|
|
u8 *stage,
|
|
u8 *step,
|
|
u32 *delay
|
|
);
|
|
static RT_STATUS
|
|
phy_ConfigBBWithPgHeaderFile(struct net_device* dev,u8 ConfigType);
|
|
static long phy_TxPwrIdxToDbm( struct net_device* dev, WIRELESS_MODE WirelessMode, u8 TxPwrIdx);
|
|
static u8 phy_DbmToTxPwrIdx( struct net_device* dev, WIRELESS_MODE WirelessMode, long PowerInDbm);
|
|
void phy_SetFwCmdIOCallback(struct net_device* dev);
|
|
|
|
//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
|
|
//
|
|
// Description:
|
|
// Base Band read by 4181 to make sure that operation could be done in unlimited cycle.
|
|
//
|
|
// Assumption:
|
|
// - Only use on RTL8192S USB interface.
|
|
// - PASSIVE LEVEL
|
|
//
|
|
// Created by Roger, 2008.09.06.
|
|
//
|
|
//use in phy only
|
|
u32 phy_QueryUsbBBReg(struct net_device* dev, u32 RegAddr)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u32 ReturnValue = 0xffffffff;
|
|
u8 PollingCnt = 50;
|
|
u8 BBWaitCounter = 0;
|
|
|
|
|
|
//
|
|
// <Roger_Notes> Due to PASSIVE_LEVEL, so we ONLY simply busy waiting for a while here.
|
|
// We have to make sure that previous BB I/O has been done.
|
|
// 2008.08.20.
|
|
//
|
|
while(priv->bChangeBBInProgress)
|
|
{
|
|
BBWaitCounter ++;
|
|
RT_TRACE(COMP_RF, "phy_QueryUsbBBReg(): Wait 1 ms (%d times)...\n", BBWaitCounter);
|
|
msleep(1); // 1 ms
|
|
|
|
// Wait too long, return FALSE to avoid to be stuck here.
|
|
if((BBWaitCounter > 100) )//||RT_USB_CANNOT_IO(Adapter))
|
|
{
|
|
RT_TRACE(COMP_RF, "phy_QueryUsbBBReg(): (%d) Wait too logn to query BB!!\n", BBWaitCounter);
|
|
return ReturnValue;
|
|
}
|
|
}
|
|
|
|
priv->bChangeBBInProgress = true;
|
|
|
|
read_nic_dword(dev, RegAddr);
|
|
|
|
do
|
|
{// Make sure that access could be done.
|
|
if((read_nic_byte(dev, PHY_REG)&HST_RDBUSY) == 0)
|
|
break;
|
|
}while( --PollingCnt );
|
|
|
|
if(PollingCnt == 0)
|
|
{
|
|
RT_TRACE(COMP_RF, "Fail!!!phy_QueryUsbBBReg(): RegAddr(%#x) = %#x\n", RegAddr, ReturnValue);
|
|
}
|
|
else
|
|
{
|
|
// Data FW read back.
|
|
ReturnValue = read_nic_dword(dev, PHY_REG_DATA);
|
|
RT_TRACE(COMP_RF, "phy_QueryUsbBBReg(): RegAddr(%#x) = %#x, PollingCnt(%d)\n", RegAddr, ReturnValue, PollingCnt);
|
|
}
|
|
|
|
priv->bChangeBBInProgress = false;
|
|
|
|
return ReturnValue;
|
|
}
|
|
|
|
|
|
|
|
//
|
|
// Description:
|
|
// Base Band wrote by 4181 to make sure that operation could be done in unlimited cycle.
|
|
//
|
|
// Assumption:
|
|
// - Only use on RTL8192S USB interface.
|
|
// - PASSIVE LEVEL
|
|
//
|
|
// Created by Roger, 2008.09.06.
|
|
//
|
|
//use in phy only
|
|
void
|
|
phy_SetUsbBBReg(struct net_device* dev,u32 RegAddr,u32 Data)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 BBWaitCounter = 0;
|
|
|
|
RT_TRACE(COMP_RF, "phy_SetUsbBBReg(): RegAddr(%#x) <= %#x\n", RegAddr, Data);
|
|
|
|
//
|
|
// <Roger_Notes> Due to PASSIVE_LEVEL, so we ONLY simply busy waiting for a while here.
|
|
// We have to make sure that previous BB I/O has been done.
|
|
// 2008.08.20.
|
|
//
|
|
while(priv->bChangeBBInProgress)
|
|
{
|
|
BBWaitCounter ++;
|
|
RT_TRACE(COMP_RF, "phy_SetUsbBBReg(): Wait 1 ms (%d times)...\n", BBWaitCounter);
|
|
msleep(1); // 1 ms
|
|
|
|
if((BBWaitCounter > 100))// || RT_USB_CANNOT_IO(Adapter))
|
|
{
|
|
RT_TRACE(COMP_RF, "phy_SetUsbBBReg(): (%d) Wait too logn to query BB!!\n", BBWaitCounter);
|
|
return;
|
|
}
|
|
}
|
|
|
|
priv->bChangeBBInProgress = true;
|
|
//printk("**************%s: RegAddr:%x Data:%x\n", __FUNCTION__,RegAddr, Data);
|
|
write_nic_dword(dev, RegAddr, Data);
|
|
|
|
priv->bChangeBBInProgress = false;
|
|
}
|
|
|
|
|
|
|
|
//
|
|
// Description:
|
|
// RF read by 4181 to make sure that operation could be done in unlimited cycle.
|
|
//
|
|
// Assumption:
|
|
// - Only use on RTL8192S USB interface.
|
|
// - PASSIVE LEVEL
|
|
// - RT_RF_OPERATE_SPINLOCK is acquired and keep on holding to the end.FIXLZM
|
|
//
|
|
// Created by Roger, 2008.09.06.
|
|
//
|
|
//use in phy only
|
|
u32 phy_QueryUsbRFReg( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset)
|
|
{
|
|
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
//u32 value = 0, ReturnValue = 0;
|
|
u32 ReturnValue = 0;
|
|
//u32 tmplong,tmplong2;
|
|
u8 PollingCnt = 50;
|
|
u8 RFWaitCounter = 0;
|
|
|
|
|
|
//
|
|
// <Roger_Notes> Due to PASSIVE_LEVEL, so we ONLY simply busy waiting for a while here.
|
|
// We have to make sure that previous RF I/O has been done.
|
|
// 2008.08.20.
|
|
//
|
|
while(priv->bChangeRFInProgress)
|
|
{
|
|
//PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
|
|
//spin_lock_irqsave(&priv->rf_lock, flags); //LZM,090318
|
|
down(&priv->rf_sem);
|
|
|
|
RFWaitCounter ++;
|
|
RT_TRACE(COMP_RF, "phy_QueryUsbRFReg(): Wait 1 ms (%d times)...\n", RFWaitCounter);
|
|
msleep(1); // 1 ms
|
|
|
|
if((RFWaitCounter > 100)) //|| RT_USB_CANNOT_IO(Adapter))
|
|
{
|
|
RT_TRACE(COMP_RF, "phy_QueryUsbRFReg(): (%d) Wait too logn to query BB!!\n", RFWaitCounter);
|
|
return 0xffffffff;
|
|
}
|
|
else
|
|
{
|
|
//PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
|
|
}
|
|
}
|
|
|
|
priv->bChangeRFInProgress = true;
|
|
//PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
|
|
|
|
|
|
Offset &= 0x3f; //RF_Offset= 0x00~0x3F
|
|
|
|
write_nic_dword(dev, RF_BB_CMD_ADDR, 0xF0000002|
|
|
(Offset<<8)| //RF_Offset= 0x00~0x3F
|
|
(eRFPath<<16)); //RF_Path = 0(A) or 1(B)
|
|
|
|
do
|
|
{// Make sure that access could be done.
|
|
if(read_nic_dword(dev, RF_BB_CMD_ADDR) == 0)
|
|
break;
|
|
}while( --PollingCnt );
|
|
|
|
// Data FW read back.
|
|
ReturnValue = read_nic_dword(dev, RF_BB_CMD_DATA);
|
|
|
|
//PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
|
|
//spin_unlock_irqrestore(&priv->rf_lock, flags); //LZM,090318
|
|
up(&priv->rf_sem);
|
|
priv->bChangeRFInProgress = false;
|
|
|
|
RT_TRACE(COMP_RF, "phy_QueryUsbRFReg(): eRFPath(%d), Offset(%#x) = %#x\n", eRFPath, Offset, ReturnValue);
|
|
|
|
return ReturnValue;
|
|
|
|
}
|
|
|
|
|
|
//
|
|
// Description:
|
|
// RF wrote by 4181 to make sure that operation could be done in unlimited cycle.
|
|
//
|
|
// Assumption:
|
|
// - Only use on RTL8192S USB interface.
|
|
// - PASSIVE LEVEL
|
|
// - RT_RF_OPERATE_SPINLOCK is acquired and keep on holding to the end.FIXLZM
|
|
//
|
|
// Created by Roger, 2008.09.06.
|
|
//
|
|
//use in phy only
|
|
void phy_SetUsbRFReg(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 RegAddr,u32 Data)
|
|
{
|
|
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 PollingCnt = 50;
|
|
u8 RFWaitCounter = 0;
|
|
|
|
|
|
//
|
|
// <Roger_Notes> Due to PASSIVE_LEVEL, so we ONLY simply busy waiting for a while here.
|
|
// We have to make sure that previous BB I/O has been done.
|
|
// 2008.08.20.
|
|
//
|
|
while(priv->bChangeRFInProgress)
|
|
{
|
|
//PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
|
|
//spin_lock_irqsave(&priv->rf_lock, flags); //LZM,090318
|
|
down(&priv->rf_sem);
|
|
|
|
RFWaitCounter ++;
|
|
RT_TRACE(COMP_RF, "phy_SetUsbRFReg(): Wait 1 ms (%d times)...\n", RFWaitCounter);
|
|
msleep(1); // 1 ms
|
|
|
|
if((RFWaitCounter > 100))// || RT_USB_CANNOT_IO(Adapter))
|
|
{
|
|
RT_TRACE(COMP_RF, "phy_SetUsbRFReg(): (%d) Wait too logn to query BB!!\n", RFWaitCounter);
|
|
return;
|
|
}
|
|
else
|
|
{
|
|
//PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
|
|
}
|
|
}
|
|
|
|
priv->bChangeRFInProgress = true;
|
|
//PlatformReleaseSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
|
|
|
|
|
|
RegAddr &= 0x3f; //RF_Offset= 0x00~0x3F
|
|
|
|
write_nic_dword(dev, RF_BB_CMD_DATA, Data);
|
|
write_nic_dword(dev, RF_BB_CMD_ADDR, 0xF0000003|
|
|
(RegAddr<<8)| //RF_Offset= 0x00~0x3F
|
|
(eRFPath<<16)); //RF_Path = 0(A) or 1(B)
|
|
|
|
do
|
|
{// Make sure that access could be done.
|
|
if(read_nic_dword(dev, RF_BB_CMD_ADDR) == 0)
|
|
break;
|
|
}while( --PollingCnt );
|
|
|
|
if(PollingCnt == 0)
|
|
{
|
|
RT_TRACE(COMP_RF, "phy_SetUsbRFReg(): Set RegAddr(%#x) = %#x Fail!!!\n", RegAddr, Data);
|
|
}
|
|
|
|
//PlatformAcquireSpinLock(Adapter, RT_RF_OPERATE_SPINLOCK);
|
|
//spin_unlock_irqrestore(&priv->rf_lock, flags); //LZM,090318
|
|
up(&priv->rf_sem);
|
|
priv->bChangeRFInProgress = false;
|
|
|
|
}
|
|
|
|
|
|
/*---------------------Define local function prototype-----------------------*/
|
|
|
|
|
|
/*----------------------------Function Body----------------------------------*/
|
|
//
|
|
// 1. BB register R/W API
|
|
//
|
|
/**
|
|
* Function: PHY_QueryBBReg
|
|
*
|
|
* OverView: Read "sepcific bits" from BB register
|
|
*
|
|
* Input:
|
|
* PADAPTER Adapter,
|
|
* u32 RegAddr, //The target address to be readback
|
|
* u32 BitMask //The target bit position in the target address
|
|
* //to be readback
|
|
* Output: None
|
|
* Return: u32 Data //The readback register value
|
|
* Note: This function is equal to "GetRegSetting" in PHY programming guide
|
|
*/
|
|
//use phy dm core 8225 8256 6052
|
|
//u32 PHY_QueryBBReg(struct net_device* dev,u32 RegAddr, u32 BitMask)
|
|
u32 rtl8192_QueryBBReg(struct net_device* dev, u32 RegAddr, u32 BitMask)
|
|
{
|
|
|
|
u32 ReturnValue = 0, OriginalValue, BitShift;
|
|
|
|
|
|
RT_TRACE(COMP_RF, "--->PHY_QueryBBReg(): RegAddr(%#x), BitMask(%#x)\n", RegAddr, BitMask);
|
|
|
|
//
|
|
// <Roger_Notes> Due to 8051 operation cycle (limitation cycle: 6us) and 1-Byte access issue, we should use
|
|
// 4181 to access Base Band instead of 8051 on USB interface to make sure that access could be done in
|
|
// infinite cycle.
|
|
// 2008.09.06.
|
|
//
|
|
//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
|
|
if(IS_BB_REG_OFFSET_92S(RegAddr))
|
|
{
|
|
//if(RT_USB_CANNOT_IO(Adapter)) return FALSE;
|
|
|
|
if((RegAddr & 0x03) != 0)
|
|
{
|
|
printk("%s: Not DWORD alignment!!\n", __FUNCTION__);
|
|
return 0;
|
|
}
|
|
|
|
OriginalValue = phy_QueryUsbBBReg(dev, RegAddr);
|
|
}
|
|
else
|
|
{
|
|
OriginalValue = read_nic_dword(dev, RegAddr);
|
|
}
|
|
|
|
BitShift = phy_CalculateBitShift(BitMask);
|
|
ReturnValue = (OriginalValue & BitMask) >> BitShift;
|
|
|
|
//RTPRINT(FPHY, PHY_BBR, ("BBR MASK=0x%x Addr[0x%x]=0x%x\n", BitMask, RegAddr, OriginalValue));
|
|
RT_TRACE(COMP_RF, "<---PHY_QueryBBReg(): RegAddr(%#x), BitMask(%#x), OriginalValue(%#x)\n", RegAddr, BitMask, OriginalValue);
|
|
return (ReturnValue);
|
|
}
|
|
|
|
/**
|
|
* Function: PHY_SetBBReg
|
|
*
|
|
* OverView: Write "Specific bits" to BB register (page 8~)
|
|
*
|
|
* Input:
|
|
* PADAPTER Adapter,
|
|
* u32 RegAddr, //The target address to be modified
|
|
* u32 BitMask //The target bit position in the target address
|
|
* //to be modified
|
|
* u32 Data //The new register value in the target bit position
|
|
* //of the target address
|
|
*
|
|
* Output: None
|
|
* Return: None
|
|
* Note: This function is equal to "PutRegSetting" in PHY programming guide
|
|
*/
|
|
//use phy dm core 8225 8256
|
|
//void PHY_SetBBReg(struct net_device* dev,u32 RegAddr, u32 BitMask, u32 Data )
|
|
void rtl8192_setBBreg(struct net_device* dev, u32 RegAddr, u32 BitMask, u32 Data)
|
|
{
|
|
u32 OriginalValue, BitShift, NewValue;
|
|
|
|
|
|
RT_TRACE(COMP_RF, "--->PHY_SetBBReg(): RegAddr(%#x), BitMask(%#x), Data(%#x)\n", RegAddr, BitMask, Data);
|
|
|
|
//
|
|
// <Roger_Notes> Due to 8051 operation cycle (limitation cycle: 6us) and 1-Byte access issue, we should use
|
|
// 4181 to access Base Band instead of 8051 on USB interface to make sure that access could be done in
|
|
// infinite cycle.
|
|
// 2008.09.06.
|
|
//
|
|
//#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE))
|
|
if(IS_BB_REG_OFFSET_92S(RegAddr))
|
|
{
|
|
if((RegAddr & 0x03) != 0)
|
|
{
|
|
printk("%s: Not DWORD alignment!!\n", __FUNCTION__);
|
|
return;
|
|
}
|
|
|
|
if(BitMask!= bMaskDWord)
|
|
{//if not "double word" write
|
|
OriginalValue = phy_QueryUsbBBReg(dev, RegAddr);
|
|
BitShift = phy_CalculateBitShift(BitMask);
|
|
NewValue = (((OriginalValue) & (~BitMask))|(Data << BitShift));
|
|
phy_SetUsbBBReg(dev, RegAddr, NewValue);
|
|
}else
|
|
phy_SetUsbBBReg(dev, RegAddr, Data);
|
|
}
|
|
else
|
|
{
|
|
if(BitMask!= bMaskDWord)
|
|
{//if not "double word" write
|
|
OriginalValue = read_nic_dword(dev, RegAddr);
|
|
BitShift = phy_CalculateBitShift(BitMask);
|
|
NewValue = (((OriginalValue) & (~BitMask)) | (Data << BitShift));
|
|
write_nic_dword(dev, RegAddr, NewValue);
|
|
}else
|
|
write_nic_dword(dev, RegAddr, Data);
|
|
}
|
|
|
|
//RT_TRACE(COMP_RF, "<---PHY_SetBBReg(): RegAddr(%#x), BitMask(%#x), Data(%#x)\n", RegAddr, BitMask, Data);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
//
|
|
// 2. RF register R/W API
|
|
//
|
|
/**
|
|
* Function: PHY_QueryRFReg
|
|
*
|
|
* OverView: Query "Specific bits" to RF register (page 8~)
|
|
*
|
|
* Input:
|
|
* PADAPTER Adapter,
|
|
* RF90_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D
|
|
* u32 RegAddr, //The target address to be read
|
|
* u32 BitMask //The target bit position in the target address
|
|
* //to be read
|
|
*
|
|
* Output: None
|
|
* Return: u32 Readback value
|
|
* Note: This function is equal to "GetRFRegSetting" in PHY programming guide
|
|
*/
|
|
//in dm 8256 and phy
|
|
//u32 PHY_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask)
|
|
u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask)
|
|
{
|
|
u32 Original_Value, Readback_Value, BitShift;//, flags;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
|
|
RT_TRACE(COMP_RF, "--->PHY_QueryRFReg(): RegAddr(%#x), eRFPath(%#x), BitMask(%#x)\n", RegAddr, eRFPath,BitMask);
|
|
|
|
if (!((priv->rf_pathmap >> eRFPath) & 0x1))
|
|
{
|
|
printk("EEEEEError: rfpath off! rf_pathmap=%x eRFPath=%x\n", priv->rf_pathmap, eRFPath);
|
|
return 0;
|
|
}
|
|
|
|
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
|
|
{
|
|
printk("EEEEEError: not legal rfpath! eRFPath=%x\n", eRFPath);
|
|
return 0;
|
|
}
|
|
|
|
/* 2008/01/17 MH We get and release spin lock when reading RF register. */
|
|
//PlatformAcquireSpinLock(dev, RT_RF_OPERATE_SPINLOCK);FIXLZM
|
|
//spin_lock_irqsave(&priv->rf_lock, flags); //YJ,test,090113
|
|
down(&priv->rf_sem);
|
|
//
|
|
// <Roger_Notes> Due to 8051 operation cycle (limitation cycle: 6us) and 1-Byte access issue, we should use
|
|
// 4181 to access Base Band instead of 8051 on USB interface to make sure that access could be done in
|
|
// infinite cycle.
|
|
// 2008.09.06.
|
|
//
|
|
//#if (HAL_CODE_BASE == RTL8192_S && DEV_BUS_TYPE==USB_INTERFACE)
|
|
//if(RT_USB_CANNOT_IO(Adapter)) return FALSE;
|
|
Original_Value = phy_QueryUsbRFReg(dev, eRFPath, RegAddr);
|
|
|
|
BitShift = phy_CalculateBitShift(BitMask);
|
|
Readback_Value = (Original_Value & BitMask) >> BitShift;
|
|
//spin_unlock_irqrestore(&priv->rf_lock, flags); //YJ,test,090113
|
|
up(&priv->rf_sem);
|
|
//PlatformReleaseSpinLock(dev, RT_RF_OPERATE_SPINLOCK);
|
|
|
|
//RTPRINT(FPHY, PHY_RFR, ("RFR-%d MASK=0x%x Addr[0x%x]=0x%x\n", eRFPath, BitMask, RegAddr, Original_Value));
|
|
|
|
return (Readback_Value);
|
|
}
|
|
|
|
/**
|
|
* Function: PHY_SetRFReg
|
|
*
|
|
* OverView: Write "Specific bits" to RF register (page 8~)
|
|
*
|
|
* Input:
|
|
* PADAPTER Adapter,
|
|
* RF90_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D
|
|
* u32 RegAddr, //The target address to be modified
|
|
* u32 BitMask //The target bit position in the target address
|
|
* //to be modified
|
|
* u32 Data //The new register Data in the target bit position
|
|
* //of the target address
|
|
*
|
|
* Output: None
|
|
* Return: None
|
|
* Note: This function is equal to "PutRFRegSetting" in PHY programming guide
|
|
*/
|
|
//use phy 8225 8256
|
|
//void PHY_SetRFReg(struct net_device* dev,RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask,u32 Data )
|
|
void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data)
|
|
{
|
|
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u32 Original_Value, BitShift, New_Value;//, flags;
|
|
|
|
RT_TRACE(COMP_RF, "--->PHY_SetRFReg(): RegAddr(%#x), BitMask(%#x), Data(%#x), eRFPath(%#x)\n",
|
|
RegAddr, BitMask, Data, eRFPath);
|
|
|
|
if (!((priv->rf_pathmap >> eRFPath) & 0x1))
|
|
{
|
|
printk("EEEEEError: rfpath off! rf_pathmap=%x eRFPath=%x\n", priv->rf_pathmap, eRFPath);
|
|
return ;
|
|
}
|
|
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
|
|
{
|
|
printk("EEEEEError: not legal rfpath! eRFPath=%x\n", eRFPath);
|
|
return;
|
|
}
|
|
|
|
/* 2008/01/17 MH We get and release spin lock when writing RF register. */
|
|
//PlatformAcquireSpinLock(dev, RT_RF_OPERATE_SPINLOCK);
|
|
//spin_lock_irqsave(&priv->rf_lock, flags); //YJ,test,090113
|
|
down(&priv->rf_sem);
|
|
//
|
|
// <Roger_Notes> Due to 8051 operation cycle (limitation cycle: 6us) and 1-Byte access issue, we should use
|
|
// 4181 to access Base Band instead of 8051 on USB interface to make sure that access could be done in
|
|
// infinite cycle.
|
|
// 2008.09.06.
|
|
//
|
|
//#if (HAL_CODE_BASE == RTL8192_S && DEV_BUS_TYPE==USB_INTERFACE)
|
|
//if(RT_USB_CANNOT_IO(Adapter)) return;
|
|
|
|
if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only
|
|
{
|
|
Original_Value = phy_QueryUsbRFReg(dev, eRFPath, RegAddr);
|
|
BitShift = phy_CalculateBitShift(BitMask);
|
|
New_Value = (((Original_Value)&(~BitMask))|(Data<< BitShift));
|
|
phy_SetUsbRFReg(dev, eRFPath, RegAddr, New_Value);
|
|
}
|
|
else
|
|
phy_SetUsbRFReg(dev, eRFPath, RegAddr, Data);
|
|
//PlatformReleaseSpinLock(dev, RT_RF_OPERATE_SPINLOCK);
|
|
//spin_unlock_irqrestore(&priv->rf_lock, flags); //YJ,test,090113
|
|
up(&priv->rf_sem);
|
|
//RTPRINT(FPHY, PHY_RFW, ("RFW-%d MASK=0x%x Addr[0x%x]=0x%x\n", eRFPath, BitMask, RegAddr, Data));
|
|
RT_TRACE(COMP_RF, "<---PHY_SetRFReg(): RegAddr(%#x), BitMask(%#x), Data(%#x), eRFPath(%#x)\n",
|
|
RegAddr, BitMask, Data, eRFPath);
|
|
|
|
}
|
|
|
|
/**
|
|
* Function: phy_CalculateBitShift
|
|
*
|
|
* OverView: Get shifted position of the BitMask
|
|
*
|
|
* Input:
|
|
* u32 BitMask,
|
|
*
|
|
* Output: none
|
|
* Return: u32 Return the shift bit bit position of the mask
|
|
*/
|
|
//use in phy only
|
|
static u32 phy_CalculateBitShift(u32 BitMask)
|
|
{
|
|
u32 i;
|
|
|
|
for(i=0; i<=31; i++)
|
|
{
|
|
if ( ((BitMask>>i) & 0x1 ) == 1)
|
|
break;
|
|
}
|
|
|
|
return (i);
|
|
}
|
|
|
|
|
|
//
|
|
// 3. Initial MAC/BB/RF config by reading MAC/BB/RF txt.
|
|
//
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: PHY_MACConfig8192S
|
|
*
|
|
* Overview: Condig MAC by header file or parameter file.
|
|
*
|
|
* Input: NONE
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: NONE
|
|
*
|
|
* Revised History:
|
|
* When Who Remark
|
|
* 08/12/2008 MHC Create Version 0.
|
|
*
|
|
*---------------------------------------------------------------------------*/
|
|
//adapter_start
|
|
extern bool PHY_MACConfig8192S(struct net_device* dev)
|
|
{
|
|
RT_STATUS rtStatus = RT_STATUS_SUCCESS;
|
|
|
|
//
|
|
// Config MAC
|
|
//
|
|
rtStatus = phy_ConfigMACWithHeaderFile(dev);
|
|
return (rtStatus == RT_STATUS_SUCCESS) ? true:false;
|
|
|
|
}
|
|
|
|
//adapter_start
|
|
extern bool
|
|
PHY_BBConfig8192S(struct net_device* dev)
|
|
{
|
|
RT_STATUS rtStatus = RT_STATUS_SUCCESS;
|
|
|
|
u8 PathMap = 0, index = 0, rf_num = 0;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
phy_InitBBRFRegisterDefinition(dev);
|
|
|
|
//
|
|
// Config BB and AGC
|
|
//
|
|
//switch( Adapter->MgntInfo.bRegHwParaFile )
|
|
//{
|
|
// case 0:
|
|
// phy_BB8190_Config_HardCode(dev);
|
|
// break;
|
|
|
|
// case 1:
|
|
rtStatus = phy_BB8192S_Config_ParaFile(dev);
|
|
// break;
|
|
|
|
// case 2:
|
|
// Partial Modify.
|
|
// phy_BB8190_Config_HardCode(dev);
|
|
// phy_BB8192S_Config_ParaFile(dev);
|
|
// break;
|
|
|
|
// default:
|
|
// phy_BB8190_Config_HardCode(dev);
|
|
// break;
|
|
//}
|
|
PathMap = (u8)(rtl8192_QueryBBReg(dev, rFPGA0_TxInfo, 0xf) |
|
|
rtl8192_QueryBBReg(dev, rOFDM0_TRxPathEnable, 0xf));
|
|
priv->rf_pathmap = PathMap;
|
|
for(index = 0; index<4; index++)
|
|
{
|
|
if((PathMap>>index)&0x1)
|
|
rf_num++;
|
|
}
|
|
|
|
if((priv->rf_type==RF_1T1R && rf_num!=1) ||
|
|
(priv->rf_type==RF_1T2R && rf_num!=2) ||
|
|
(priv->rf_type==RF_2T2R && rf_num!=2) ||
|
|
(priv->rf_type==RF_2T2R_GREEN && rf_num!=2) ||
|
|
(priv->rf_type==RF_2T4R && rf_num!=4))
|
|
{
|
|
RT_TRACE( COMP_INIT, "PHY_BBConfig8192S: RF_Type(%x) does not match RF_Num(%x)!!\n", priv->rf_type, rf_num);
|
|
}
|
|
return (rtStatus == RT_STATUS_SUCCESS) ? 1:0;
|
|
}
|
|
|
|
//adapter_start
|
|
extern bool
|
|
PHY_RFConfig8192S(struct net_device* dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
RT_STATUS rtStatus = RT_STATUS_SUCCESS;
|
|
|
|
//Set priv->rf_chip = RF_8225 to do real PHY FPGA initilization
|
|
|
|
//<Roger_EXP> We assign RF type here temporally. 2008.09.12.
|
|
priv->rf_chip = RF_6052;
|
|
|
|
//
|
|
// RF config
|
|
//
|
|
switch(priv->rf_chip)
|
|
{
|
|
case RF_8225:
|
|
case RF_6052:
|
|
rtStatus = PHY_RF6052_Config(dev);
|
|
break;
|
|
|
|
case RF_8256:
|
|
//rtStatus = PHY_RF8256_Config(dev);
|
|
break;
|
|
|
|
case RF_8258:
|
|
break;
|
|
|
|
case RF_PSEUDO_11N:
|
|
//rtStatus = PHY_RF8225_Config(dev);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return (rtStatus == RT_STATUS_SUCCESS) ? 1:0;
|
|
}
|
|
|
|
|
|
// Joseph test: new initialize order!!
|
|
// Test only!! This part need to be re-organized.
|
|
// Now it is just for 8256.
|
|
//use in phy only
|
|
#ifdef TO_DO_LIST
|
|
static RT_STATUS
|
|
phy_BB8190_Config_HardCode(struct net_device* dev)
|
|
{
|
|
//RT_ASSERT(FALSE, ("This function is not implement yet!! \n"));
|
|
return RT_STATUS_SUCCESS;
|
|
}
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: phy_SetBBtoDiffRFWithHeaderFile()
|
|
*
|
|
* Overview: This function
|
|
*
|
|
*
|
|
* Input: PADAPTER Adapter
|
|
* u1Byte ConfigType 0 => PHY_CONFIG
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: RT_STATUS_SUCCESS: configuration file exist
|
|
* When Who Remark
|
|
* 2008/11/10 tynli
|
|
* use in phy only
|
|
*---------------------------------------------------------------------------*/
|
|
static RT_STATUS
|
|
phy_SetBBtoDiffRFWithHeaderFile(struct net_device* dev, u8 ConfigType)
|
|
{
|
|
int i;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u32* Rtl819XPHY_REGArraytoXTXR_Table;
|
|
u16 PHY_REGArraytoXTXRLen;
|
|
|
|
//#if (HAL_CODE_BASE != RTL8192_S)
|
|
|
|
if(priv->rf_type == RF_1T1R)
|
|
{
|
|
Rtl819XPHY_REGArraytoXTXR_Table = Rtl819XPHY_REG_to1T1R_Array;
|
|
PHY_REGArraytoXTXRLen = PHY_ChangeTo_1T1RArrayLength;
|
|
}
|
|
else if(priv->rf_type == RF_1T2R)
|
|
{
|
|
Rtl819XPHY_REGArraytoXTXR_Table = Rtl819XPHY_REG_to1T2R_Array;
|
|
PHY_REGArraytoXTXRLen = PHY_ChangeTo_1T2RArrayLength;
|
|
}
|
|
//else if(priv->rf_type == RF_2T2R || priv->rf_type == RF_2T2R_GREEN)
|
|
//{
|
|
// Rtl819XPHY_REGArraytoXTXR_Table = Rtl819XPHY_REG_to2T2R_Array;
|
|
// PHY_REGArraytoXTXRLen = PHY_ChangeTo_2T2RArrayLength;
|
|
//}
|
|
else
|
|
{
|
|
return RT_STATUS_FAILURE;
|
|
}
|
|
|
|
if(ConfigType == BaseBand_Config_PHY_REG)
|
|
{
|
|
for(i=0;i<PHY_REGArraytoXTXRLen;i=i+3)
|
|
{
|
|
if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfe)
|
|
mdelay(50);
|
|
else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfd)
|
|
mdelay(5);
|
|
else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfc)
|
|
mdelay(1);
|
|
else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfb)
|
|
udelay(50);
|
|
else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xfa)
|
|
udelay(5);
|
|
else if (Rtl819XPHY_REGArraytoXTXR_Table[i] == 0xf9)
|
|
udelay(1);
|
|
rtl8192_setBBreg(dev, Rtl819XPHY_REGArraytoXTXR_Table[i], Rtl819XPHY_REGArraytoXTXR_Table[i+1], Rtl819XPHY_REGArraytoXTXR_Table[i+2]);
|
|
//RT_TRACE(COMP_SEND,
|
|
//"The Rtl819XPHY_REGArraytoXTXR_Table[0] is %lx Rtl819XPHY_REGArraytoXTXR_Table[1] is %lx Rtl819XPHY_REGArraytoXTXR_Table[2] is %lx \n",
|
|
//Rtl819XPHY_REGArraytoXTXR_Table[i],Rtl819XPHY_REGArraytoXTXR_Table[i+1], Rtl819XPHY_REGArraytoXTXR_Table[i+2]);
|
|
}
|
|
}
|
|
else {
|
|
RT_TRACE(COMP_SEND, "phy_SetBBtoDiffRFWithHeaderFile(): ConfigType != BaseBand_Config_PHY_REG\n");
|
|
}
|
|
//#endif // #if (HAL_CODE_BASE != RTL8192_S)
|
|
return RT_STATUS_SUCCESS;
|
|
}
|
|
|
|
|
|
//use in phy only
|
|
static RT_STATUS
|
|
phy_BB8192S_Config_ParaFile(struct net_device* dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
RT_STATUS rtStatus = RT_STATUS_SUCCESS;
|
|
//u8 u2RegValue;
|
|
//u16 u4RegValue;
|
|
//char szBBRegFile[] = RTL819X_PHY_REG;
|
|
//char szBBRegFile1T2R[] = RTL819X_PHY_REG_1T2R;
|
|
//char szBBRegPgFile[] = RTL819X_PHY_REG_PG;
|
|
//char szAGCTableFile[] = RTL819X_AGC_TAB;
|
|
//char szBBRegto1T1RFile[] = RTL819X_PHY_REG_to1T1R;
|
|
//char szBBRegto1T2RFile[] = RTL819X_PHY_REG_to1T2R;
|
|
|
|
RT_TRACE(COMP_INIT, "==>phy_BB8192S_Config_ParaFile\n");
|
|
|
|
//
|
|
// 1. Read PHY_REG.TXT BB INIT!!
|
|
// We will separate as 1T1R/1T2R/1T2R_GREEN/2T2R
|
|
//
|
|
if (priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R ||
|
|
priv->rf_type == RF_1T1R ||priv->rf_type == RF_2T2R_GREEN)
|
|
{
|
|
rtStatus = phy_ConfigBBWithHeaderFile(dev,BaseBand_Config_PHY_REG);
|
|
if(priv->rf_type != RF_2T2R && priv->rf_type != RF_2T2R_GREEN)
|
|
{//2008.11.10 Added by tynli. The default PHY_REG.txt we read is for 2T2R,
|
|
//so we should reconfig BB reg with the right PHY parameters.
|
|
rtStatus = phy_SetBBtoDiffRFWithHeaderFile(dev,BaseBand_Config_PHY_REG);
|
|
}
|
|
}else
|
|
rtStatus = RT_STATUS_FAILURE;
|
|
|
|
if(rtStatus != RT_STATUS_SUCCESS){
|
|
RT_TRACE(COMP_INIT, "phy_BB8192S_Config_ParaFile():Write BB Reg Fail!!");
|
|
goto phy_BB8190_Config_ParaFile_Fail;
|
|
}
|
|
|
|
//
|
|
// 2. If EEPROM or EFUSE autoload OK, We must config by PHY_REG_PG.txt
|
|
//
|
|
if (priv->AutoloadFailFlag == false)
|
|
{
|
|
rtStatus = phy_ConfigBBWithPgHeaderFile(dev,BaseBand_Config_PHY_REG);
|
|
}
|
|
if(rtStatus != RT_STATUS_SUCCESS){
|
|
RT_TRACE(COMP_INIT, "phy_BB8192S_Config_ParaFile():BB_PG Reg Fail!!");
|
|
goto phy_BB8190_Config_ParaFile_Fail;
|
|
}
|
|
|
|
//
|
|
// 3. BB AGC table Initialization
|
|
//
|
|
rtStatus = phy_ConfigBBWithHeaderFile(dev,BaseBand_Config_AGC_TAB);
|
|
|
|
if(rtStatus != RT_STATUS_SUCCESS){
|
|
printk( "phy_BB8192S_Config_ParaFile():AGC Table Fail\n");
|
|
goto phy_BB8190_Config_ParaFile_Fail;
|
|
}
|
|
|
|
|
|
// Check if the CCK HighPower is turned ON.
|
|
// This is used to calculate PWDB.
|
|
priv->bCckHighPower = (bool)(rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, 0x200));
|
|
|
|
|
|
phy_BB8190_Config_ParaFile_Fail:
|
|
return rtStatus;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: phy_ConfigMACWithHeaderFile()
|
|
*
|
|
* Overview: This function read BB parameters from Header file we gen, and do register
|
|
* Read/Write
|
|
*
|
|
* Input: PADAPTER Adapter
|
|
* char* pFileName
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: RT_STATUS_SUCCESS: configuration file exist
|
|
*
|
|
* Note: The format of MACPHY_REG.txt is different from PHY and RF.
|
|
* [Register][Mask][Value]
|
|
*---------------------------------------------------------------------------*/
|
|
//use in phy only
|
|
static RT_STATUS
|
|
phy_ConfigMACWithHeaderFile(struct net_device* dev)
|
|
{
|
|
u32 i = 0;
|
|
u32 ArrayLength = 0;
|
|
u32* ptrArray;
|
|
//struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
//#if (HAL_CODE_BASE != RTL8192_S)
|
|
/*if(Adapter->bInHctTest)
|
|
{
|
|
RT_TRACE(COMP_INIT, DBG_LOUD, ("Rtl819XMACPHY_ArrayDTM\n"));
|
|
ArrayLength = MACPHY_ArrayLengthDTM;
|
|
ptrArray = Rtl819XMACPHY_ArrayDTM;
|
|
}
|
|
else if(pHalData->bTXPowerDataReadFromEEPORM)
|
|
{
|
|
// RT_TRACE(COMP_INIT, DBG_LOUD, ("Rtl819XMACPHY_Array_PG\n"));
|
|
// ArrayLength = MACPHY_Array_PGLength;
|
|
// ptrArray = Rtl819XMACPHY_Array_PG;
|
|
|
|
}else*/
|
|
{ //2008.11.06 Modified by tynli.
|
|
RT_TRACE(COMP_INIT, "Read Rtl819XMACPHY_Array\n");
|
|
ArrayLength = MAC_2T_ArrayLength;
|
|
ptrArray = Rtl819XMAC_Array;
|
|
}
|
|
|
|
/*for(i = 0 ;i < ArrayLength;i=i+3){
|
|
RT_TRACE(COMP_SEND, DBG_LOUD, ("The Rtl819XMACPHY_Array[0] is %lx Rtl819XMACPHY_Array[1] is %lx Rtl819XMACPHY_Array[2] is %lx\n",ptrArray[i], ptrArray[i+1], ptrArray[i+2]));
|
|
if(ptrArray[i] == 0x318)
|
|
{
|
|
ptrArray[i+2] = 0x00000800;
|
|
//DbgPrint("ptrArray[i], ptrArray[i+1], ptrArray[i+2] = %x, %x, %x\n",
|
|
// ptrArray[i], ptrArray[i+1], ptrArray[i+2]);
|
|
}
|
|
PHY_SetBBReg(Adapter, ptrArray[i], ptrArray[i+1], ptrArray[i+2]);
|
|
}*/
|
|
for(i = 0 ;i < ArrayLength;i=i+2){ // Add by tynli for 2 column
|
|
write_nic_byte(dev, ptrArray[i], (u8)ptrArray[i+1]);
|
|
}
|
|
//#endif
|
|
return RT_STATUS_SUCCESS;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: phy_ConfigBBWithHeaderFile()
|
|
*
|
|
* Overview: This function read BB parameters from general file format, and do register
|
|
* Read/Write
|
|
*
|
|
* Input: PADAPTER Adapter
|
|
* u8 ConfigType 0 => PHY_CONFIG
|
|
* 1 =>AGC_TAB
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: RT_STATUS_SUCCESS: configuration file exist
|
|
*
|
|
*---------------------------------------------------------------------------*/
|
|
//use in phy only
|
|
static RT_STATUS
|
|
phy_ConfigBBWithHeaderFile(struct net_device* dev,u8 ConfigType)
|
|
{
|
|
int i;
|
|
//u8 ArrayLength;
|
|
u32* Rtl819XPHY_REGArray_Table;
|
|
u32* Rtl819XAGCTAB_Array_Table;
|
|
u16 PHY_REGArrayLen, AGCTAB_ArrayLen;
|
|
//struct r8192_priv *priv = ieee80211_priv(dev);
|
|
//#if (HAL_CODE_BASE != RTL8192_S)
|
|
/*if(Adapter->bInHctTest)
|
|
{
|
|
|
|
AGCTAB_ArrayLen = AGCTAB_ArrayLengthDTM;
|
|
Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_ArrayDTM;
|
|
|
|
if(pHalData->RF_Type == RF_2T4R)
|
|
{
|
|
PHY_REGArrayLen = PHY_REGArrayLengthDTM;
|
|
Rtl819XPHY_REGArray_Table = Rtl819XPHY_REGArrayDTM;
|
|
}
|
|
else if (pHalData->RF_Type == RF_1T2R)
|
|
{
|
|
PHY_REGArrayLen = PHY_REG_1T2RArrayLengthDTM;
|
|
Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1T2RArrayDTM;
|
|
}
|
|
|
|
}
|
|
else
|
|
*/
|
|
//{
|
|
//
|
|
// 2008.11.06 Modified by tynli.
|
|
//
|
|
AGCTAB_ArrayLen = AGCTAB_ArrayLength;
|
|
Rtl819XAGCTAB_Array_Table = Rtl819XAGCTAB_Array;
|
|
PHY_REGArrayLen = PHY_REG_2T2RArrayLength; // Default RF_type: 2T2R
|
|
Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_Array;
|
|
//}
|
|
|
|
if(ConfigType == BaseBand_Config_PHY_REG)
|
|
{
|
|
for(i=0;i<PHY_REGArrayLen;i=i+2)
|
|
{
|
|
if (Rtl819XPHY_REGArray_Table[i] == 0xfe)
|
|
mdelay(50);
|
|
else if (Rtl819XPHY_REGArray_Table[i] == 0xfd)
|
|
mdelay(5);
|
|
else if (Rtl819XPHY_REGArray_Table[i] == 0xfc)
|
|
mdelay(1);
|
|
else if (Rtl819XPHY_REGArray_Table[i] == 0xfb)
|
|
udelay(50);
|
|
else if (Rtl819XPHY_REGArray_Table[i] == 0xfa)
|
|
udelay(5);
|
|
else if (Rtl819XPHY_REGArray_Table[i] == 0xf9)
|
|
udelay(1);
|
|
rtl8192_setBBreg(dev, Rtl819XPHY_REGArray_Table[i], bMaskDWord, Rtl819XPHY_REGArray_Table[i+1]);
|
|
//RT_TRACE(COMP_SEND, "The Rtl819XPHY_REGArray_Table[0] is %lx Rtl819XPHY_REGArray[1] is %lx \n",Rtl819XPHY_REGArray_Table[i], Rtl819XPHY_REGArray_Table[i+1]);
|
|
|
|
}
|
|
}
|
|
else if(ConfigType == BaseBand_Config_AGC_TAB){
|
|
for(i=0;i<AGCTAB_ArrayLen;i=i+2)
|
|
{
|
|
rtl8192_setBBreg(dev, Rtl819XAGCTAB_Array_Table[i], bMaskDWord, Rtl819XAGCTAB_Array_Table[i+1]);
|
|
}
|
|
}
|
|
//#endif // #if (HAL_CODE_BASE != RTL8192_S)
|
|
return RT_STATUS_SUCCESS;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: phy_ConfigBBWithPgHeaderFile
|
|
*
|
|
* Overview: Config PHY_REG_PG array
|
|
*
|
|
* Input: NONE
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: NONE
|
|
*
|
|
* Revised History:
|
|
* When Who Remark
|
|
* 11/06/2008 MHC Add later!!!!!!.. Please modify for new files!!!!
|
|
* 11/10/2008 tynli Modify to mew files.
|
|
//use in phy only
|
|
*---------------------------------------------------------------------------*/
|
|
static RT_STATUS
|
|
phy_ConfigBBWithPgHeaderFile(struct net_device* dev,u8 ConfigType)
|
|
{
|
|
int i;
|
|
//u8 ArrayLength;
|
|
u32* Rtl819XPHY_REGArray_Table_PG;
|
|
u16 PHY_REGArrayPGLen;
|
|
//struct r8192_priv *priv = ieee80211_priv(dev);
|
|
//#if (HAL_CODE_BASE != RTL8192_S)
|
|
// Default: pHalData->RF_Type = RF_2T2R.
|
|
|
|
PHY_REGArrayPGLen = PHY_REG_Array_PGLength;
|
|
Rtl819XPHY_REGArray_Table_PG = Rtl819XPHY_REG_Array_PG;
|
|
|
|
if(ConfigType == BaseBand_Config_PHY_REG)
|
|
{
|
|
for(i=0;i<PHY_REGArrayPGLen;i=i+3)
|
|
{
|
|
if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfe)
|
|
mdelay(50);
|
|
else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfd)
|
|
mdelay(5);
|
|
else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfc)
|
|
mdelay(1);
|
|
else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfb)
|
|
udelay(50);
|
|
else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xfa)
|
|
udelay(5);
|
|
else if (Rtl819XPHY_REGArray_Table_PG[i] == 0xf9)
|
|
udelay(1);
|
|
rtl8192_setBBreg(dev, Rtl819XPHY_REGArray_Table_PG[i], Rtl819XPHY_REGArray_Table_PG[i+1], Rtl819XPHY_REGArray_Table_PG[i+2]);
|
|
//RT_TRACE(COMP_SEND, "The Rtl819XPHY_REGArray_Table_PG[0] is %lx Rtl819XPHY_REGArray_Table_PG[1] is %lx \n",
|
|
// Rtl819XPHY_REGArray_Table_PG[i], Rtl819XPHY_REGArray_Table_PG[i+1]);
|
|
}
|
|
}else{
|
|
RT_TRACE(COMP_SEND, "phy_ConfigBBWithPgHeaderFile(): ConfigType != BaseBand_Config_PHY_REG\n");
|
|
}
|
|
return RT_STATUS_SUCCESS;
|
|
|
|
} /* phy_ConfigBBWithPgHeaderFile */
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: PHY_ConfigRFWithHeaderFile()
|
|
*
|
|
* Overview: This function read RF parameters from general file format, and do RF 3-wire
|
|
*
|
|
* Input: PADAPTER Adapter
|
|
* char* pFileName
|
|
* RF90_RADIO_PATH_E eRFPath
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: RT_STATUS_SUCCESS: configuration file exist
|
|
*
|
|
* Note: Delay may be required for RF configuration
|
|
*---------------------------------------------------------------------------*/
|
|
//in 8256 phy_RF8256_Config_ParaFile only
|
|
//RT_STATUS PHY_ConfigRFWithHeaderFile(struct net_device* dev,RF90_RADIO_PATH_E eRFPath)
|
|
u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E eRFPath)
|
|
{
|
|
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
int i;
|
|
//u32* pRFArray;
|
|
RT_STATUS rtStatus = RT_STATUS_SUCCESS;
|
|
u32 *Rtl819XRadioA_Array_Table;
|
|
u32 *Rtl819XRadioB_Array_Table;
|
|
//u32* Rtl819XRadioC_Array_Table;
|
|
//u32* Rtl819XRadioD_Array_Table;
|
|
u16 RadioA_ArrayLen,RadioB_ArrayLen;
|
|
|
|
{ //2008.11.06 Modified by tynli
|
|
RadioA_ArrayLen = RadioA_1T_ArrayLength;
|
|
Rtl819XRadioA_Array_Table=Rtl819XRadioA_Array;
|
|
Rtl819XRadioB_Array_Table=Rtl819XRadioB_Array;
|
|
RadioB_ArrayLen = RadioB_ArrayLength;
|
|
}
|
|
|
|
if( priv->rf_type == RF_2T2R_GREEN )
|
|
{
|
|
Rtl819XRadioB_Array_Table = Rtl819XRadioB_GM_Array;
|
|
RadioB_ArrayLen = RadioB_GM_ArrayLength;
|
|
}
|
|
else
|
|
{
|
|
Rtl819XRadioB_Array_Table = Rtl819XRadioB_Array;
|
|
RadioB_ArrayLen = RadioB_ArrayLength;
|
|
}
|
|
|
|
rtStatus = RT_STATUS_SUCCESS;
|
|
|
|
// When initialization, we want the delay function(mdelay(), delay_us()
|
|
// ==> actually we call PlatformStallExecution()) to do NdisStallExecution()
|
|
// [busy wait] instead of NdisMSleep(). So we acquire RT_INITIAL_SPINLOCK
|
|
// to run at Dispatch level to achive it.
|
|
//cosa PlatformAcquireSpinLock(Adapter, RT_INITIAL_SPINLOCK);
|
|
|
|
switch(eRFPath){
|
|
case RF90_PATH_A:
|
|
for(i = 0;i<RadioA_ArrayLen; i=i+2){
|
|
if(Rtl819XRadioA_Array_Table[i] == 0xfe)
|
|
{ // Deay specific ms. Only RF configuration require delay.
|
|
//#if (DEV_BUS_TYPE == USB_INTERFACE)
|
|
mdelay(1000);
|
|
}
|
|
else if (Rtl819XRadioA_Array_Table[i] == 0xfd)
|
|
mdelay(5);
|
|
else if (Rtl819XRadioA_Array_Table[i] == 0xfc)
|
|
mdelay(1);
|
|
else if (Rtl819XRadioA_Array_Table[i] == 0xfb)
|
|
udelay(50);
|
|
//PlatformStallExecution(50);
|
|
else if (Rtl819XRadioA_Array_Table[i] == 0xfa)
|
|
udelay(5);
|
|
else if (Rtl819XRadioA_Array_Table[i] == 0xf9)
|
|
udelay(1);
|
|
else
|
|
{
|
|
rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioA_Array_Table[i], bRFRegOffsetMask, Rtl819XRadioA_Array_Table[i+1]);
|
|
}
|
|
}
|
|
break;
|
|
case RF90_PATH_B:
|
|
for(i = 0;i<RadioB_ArrayLen; i=i+2){
|
|
if(Rtl819XRadioB_Array_Table[i] == 0xfe)
|
|
{ // Deay specific ms. Only RF configuration require delay.
|
|
//#if (DEV_BUS_TYPE == USB_INTERFACE)
|
|
mdelay(1000);
|
|
}
|
|
else if (Rtl819XRadioB_Array_Table[i] == 0xfd)
|
|
mdelay(5);
|
|
else if (Rtl819XRadioB_Array_Table[i] == 0xfc)
|
|
mdelay(1);
|
|
else if (Rtl819XRadioB_Array_Table[i] == 0xfb)
|
|
udelay(50);
|
|
else if (Rtl819XRadioB_Array_Table[i] == 0xfa)
|
|
udelay(5);
|
|
else if (Rtl819XRadioB_Array_Table[i] == 0xf9)
|
|
udelay(1);
|
|
else
|
|
{
|
|
rtl8192_phy_SetRFReg(dev, eRFPath, Rtl819XRadioB_Array_Table[i], bRFRegOffsetMask, Rtl819XRadioB_Array_Table[i+1]);
|
|
}
|
|
}
|
|
break;
|
|
case RF90_PATH_C:
|
|
break;
|
|
case RF90_PATH_D:
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return rtStatus;
|
|
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: PHY_CheckBBAndRFOK()
|
|
*
|
|
* Overview: This function is write register and then readback to make sure whether
|
|
* BB[PHY0, PHY1], RF[Patha, path b, path c, path d] is Ok
|
|
*
|
|
* Input: PADAPTER Adapter
|
|
* HW90_BLOCK_E CheckBlock
|
|
* RF90_RADIO_PATH_E eRFPath // it is used only when CheckBlock is HW90_BLOCK_RF
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: RT_STATUS_SUCCESS: PHY is OK
|
|
*
|
|
* Note: This function may be removed in the ASIC
|
|
*---------------------------------------------------------------------------*/
|
|
//in 8256 phy_RF8256_Config_HardCode
|
|
//but we don't use it temp
|
|
RT_STATUS
|
|
PHY_CheckBBAndRFOK(
|
|
struct net_device* dev,
|
|
HW90_BLOCK_E CheckBlock,
|
|
RF90_RADIO_PATH_E eRFPath
|
|
)
|
|
{
|
|
//struct r8192_priv *priv = ieee80211_priv(dev);
|
|
RT_STATUS rtStatus = RT_STATUS_SUCCESS;
|
|
u32 i, CheckTimes = 4,ulRegRead = 0;
|
|
u32 WriteAddr[4];
|
|
u32 WriteData[] = {0xfffff027, 0xaa55a02f, 0x00000027, 0x55aa502f};
|
|
|
|
// Initialize register address offset to be checked
|
|
WriteAddr[HW90_BLOCK_MAC] = 0x100;
|
|
WriteAddr[HW90_BLOCK_PHY0] = 0x900;
|
|
WriteAddr[HW90_BLOCK_PHY1] = 0x800;
|
|
WriteAddr[HW90_BLOCK_RF] = 0x3;
|
|
|
|
for(i=0 ; i < CheckTimes ; i++)
|
|
{
|
|
|
|
//
|
|
// Write Data to register and readback
|
|
//
|
|
switch(CheckBlock)
|
|
{
|
|
case HW90_BLOCK_MAC:
|
|
//RT_ASSERT(FALSE, ("PHY_CheckBBRFOK(): Never Write 0x100 here!"));
|
|
RT_TRACE(COMP_INIT, "PHY_CheckBBRFOK(): Never Write 0x100 here!\n");
|
|
break;
|
|
|
|
case HW90_BLOCK_PHY0:
|
|
case HW90_BLOCK_PHY1:
|
|
write_nic_dword(dev, WriteAddr[CheckBlock], WriteData[i]);
|
|
ulRegRead = read_nic_dword(dev, WriteAddr[CheckBlock]);
|
|
break;
|
|
|
|
case HW90_BLOCK_RF:
|
|
// When initialization, we want the delay function(mdelay(), delay_us()
|
|
// ==> actually we call PlatformStallExecution()) to do NdisStallExecution()
|
|
// [busy wait] instead of NdisMSleep(). So we acquire RT_INITIAL_SPINLOCK
|
|
// to run at Dispatch level to achive it.
|
|
//cosa PlatformAcquireSpinLock(dev, RT_INITIAL_SPINLOCK);
|
|
WriteData[i] &= 0xfff;
|
|
rtl8192_phy_SetRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bRFRegOffsetMask, WriteData[i]);
|
|
// TODO: we should not delay for such a long time. Ask SD3
|
|
mdelay(10);
|
|
ulRegRead = rtl8192_phy_QueryRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMaskDWord);
|
|
mdelay(10);
|
|
//cosa PlatformReleaseSpinLock(dev, RT_INITIAL_SPINLOCK);
|
|
break;
|
|
|
|
default:
|
|
rtStatus = RT_STATUS_FAILURE;
|
|
break;
|
|
}
|
|
|
|
|
|
//
|
|
// Check whether readback data is correct
|
|
//
|
|
if(ulRegRead != WriteData[i])
|
|
{
|
|
//RT_TRACE(COMP_FPGA, ("ulRegRead: %x, WriteData: %x \n", ulRegRead, WriteData[i]));
|
|
RT_TRACE(COMP_ERR, "read back error(read:%x, write:%x)\n", ulRegRead, WriteData[i]);
|
|
rtStatus = RT_STATUS_FAILURE;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return rtStatus;
|
|
}
|
|
|
|
//no use temp in windows driver
|
|
#ifdef TO_DO_LIST
|
|
void
|
|
PHY_SetRFPowerState8192SUsb(
|
|
struct net_device* dev,
|
|
RF_POWER_STATE RFPowerState
|
|
)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
bool WaitShutDown = FALSE;
|
|
u32 DWordContent;
|
|
//RF90_RADIO_PATH_E eRFPath;
|
|
u8 eRFPath;
|
|
BB_REGISTER_DEFINITION_T *pPhyReg;
|
|
|
|
if(priv->SetRFPowerStateInProgress == TRUE)
|
|
return;
|
|
|
|
priv->SetRFPowerStateInProgress = TRUE;
|
|
|
|
// TODO: Emily, 2006.11.21, we should rewrite this function
|
|
|
|
if(RFPowerState==RF_SHUT_DOWN)
|
|
{
|
|
RFPowerState=RF_OFF;
|
|
WaitShutDown=TRUE;
|
|
}
|
|
|
|
|
|
priv->RFPowerState = RFPowerState;
|
|
switch( priv->rf_chip )
|
|
{
|
|
case RF_8225:
|
|
case RF_6052:
|
|
switch( RFPowerState )
|
|
{
|
|
case RF_ON:
|
|
break;
|
|
|
|
case RF_SLEEP:
|
|
break;
|
|
|
|
case RF_OFF:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case RF_8256:
|
|
switch( RFPowerState )
|
|
{
|
|
case RF_ON:
|
|
break;
|
|
|
|
case RF_SLEEP:
|
|
break;
|
|
|
|
case RF_OFF:
|
|
for(eRFPath=(RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath < RF90_PATH_MAX; eRFPath++)
|
|
{
|
|
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
|
|
continue;
|
|
|
|
pPhyReg = &priv->PHYRegDef[eRFPath];
|
|
rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, bRFSI_RFENV);
|
|
rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0);
|
|
}
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case RF_8258:
|
|
break;
|
|
}// switch( priv->rf_chip )
|
|
|
|
priv->SetRFPowerStateInProgress = FALSE;
|
|
}
|
|
#endif
|
|
|
|
#ifdef RTL8192U
|
|
//no use temp in windows driver
|
|
void
|
|
PHY_UpdateInitialGain(
|
|
struct net_device* dev
|
|
)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
//unsigned char *IGTable;
|
|
//u8 DIG_CurrentInitialGain = 4;
|
|
|
|
switch(priv->rf_chip)
|
|
{
|
|
case RF_8225:
|
|
break;
|
|
case RF_8256:
|
|
break;
|
|
case RF_8258:
|
|
break;
|
|
case RF_PSEUDO_11N:
|
|
break;
|
|
case RF_6052:
|
|
break;
|
|
default:
|
|
RT_TRACE(COMP_DBG, "PHY_UpdateInitialGain(): unknown rf_chip: %#X\n", priv->rf_chip);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
//YJ,modified,090107
|
|
void PHY_GetHWRegOriginalValue(struct net_device* dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
// read tx power offset
|
|
// Simulate 8192
|
|
priv->MCSTxPowerLevelOriginalOffset[0] =
|
|
rtl8192_QueryBBReg(dev, rTxAGC_Rate18_06, bMaskDWord);
|
|
priv->MCSTxPowerLevelOriginalOffset[1] =
|
|
rtl8192_QueryBBReg(dev, rTxAGC_Rate54_24, bMaskDWord);
|
|
priv->MCSTxPowerLevelOriginalOffset[2] =
|
|
rtl8192_QueryBBReg(dev, rTxAGC_Mcs03_Mcs00, bMaskDWord);
|
|
priv->MCSTxPowerLevelOriginalOffset[3] =
|
|
rtl8192_QueryBBReg(dev, rTxAGC_Mcs07_Mcs04, bMaskDWord);
|
|
priv->MCSTxPowerLevelOriginalOffset[4] =
|
|
rtl8192_QueryBBReg(dev, rTxAGC_Mcs11_Mcs08, bMaskDWord);
|
|
priv->MCSTxPowerLevelOriginalOffset[5] =
|
|
rtl8192_QueryBBReg(dev, rTxAGC_Mcs15_Mcs12, bMaskDWord);
|
|
|
|
// Read CCK offset
|
|
priv->MCSTxPowerLevelOriginalOffset[6] =
|
|
rtl8192_QueryBBReg(dev, rTxAGC_CCK_Mcs32, bMaskDWord);
|
|
RT_TRACE(COMP_INIT, "Legacy OFDM =%08x/%08x HT_OFDM=%08x/%08x/%08x/%08x\n",
|
|
priv->MCSTxPowerLevelOriginalOffset[0], priv->MCSTxPowerLevelOriginalOffset[1] ,
|
|
priv->MCSTxPowerLevelOriginalOffset[2], priv->MCSTxPowerLevelOriginalOffset[3] ,
|
|
priv->MCSTxPowerLevelOriginalOffset[4], priv->MCSTxPowerLevelOriginalOffset[5] );
|
|
|
|
// read rx initial gain
|
|
priv->DefaultInitialGain[0] = rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, bMaskByte0);
|
|
priv->DefaultInitialGain[1] = rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, bMaskByte0);
|
|
priv->DefaultInitialGain[2] = rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, bMaskByte0);
|
|
priv->DefaultInitialGain[3] = rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, bMaskByte0);
|
|
RT_TRACE(COMP_INIT, "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x) \n",
|
|
priv->DefaultInitialGain[0], priv->DefaultInitialGain[1],
|
|
priv->DefaultInitialGain[2], priv->DefaultInitialGain[3]);
|
|
|
|
// read framesync
|
|
priv->framesync = rtl8192_QueryBBReg(dev, rOFDM0_RxDetector3, bMaskByte0);
|
|
priv->framesyncC34 = rtl8192_QueryBBReg(dev, rOFDM0_RxDetector2, bMaskDWord);
|
|
RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x \n",
|
|
rOFDM0_RxDetector3, priv->framesync);
|
|
}
|
|
//YJ,modified,090107,end
|
|
|
|
|
|
|
|
/**
|
|
* Function: phy_InitBBRFRegisterDefinition
|
|
*
|
|
* OverView: Initialize Register definition offset for Radio Path A/B/C/D
|
|
*
|
|
* Input:
|
|
* PADAPTER Adapter,
|
|
*
|
|
* Output: None
|
|
* Return: None
|
|
* Note: The initialization value is constant and it should never be changes
|
|
*/
|
|
//use in phy only
|
|
static void phy_InitBBRFRegisterDefinition( struct net_device* dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
// RF Interface Sowrtware Control
|
|
priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870
|
|
priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872)
|
|
priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874
|
|
priv->PHYRegDef[RF90_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876)
|
|
|
|
// RF Interface Readback Value
|
|
priv->PHYRegDef[RF90_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; // 16 LSBs if read 32-bit from 0x8E0
|
|
priv->PHYRegDef[RF90_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2)
|
|
priv->PHYRegDef[RF90_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 LSBs if read 32-bit from 0x8E4
|
|
priv->PHYRegDef[RF90_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6)
|
|
|
|
// RF Interface Output (and Enable)
|
|
priv->PHYRegDef[RF90_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x860
|
|
priv->PHYRegDef[RF90_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x864
|
|
priv->PHYRegDef[RF90_PATH_C].rfintfo = rFPGA0_XC_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x868
|
|
priv->PHYRegDef[RF90_PATH_D].rfintfo = rFPGA0_XD_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x86C
|
|
|
|
// RF Interface (Output and) Enable
|
|
priv->PHYRegDef[RF90_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862)
|
|
priv->PHYRegDef[RF90_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866)
|
|
priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A)
|
|
priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E)
|
|
|
|
//Addr of LSSI. Wirte RF register by driver
|
|
priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter
|
|
priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter;
|
|
priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter;
|
|
priv->PHYRegDef[RF90_PATH_D].rf3wireOffset = rFPGA0_XD_LSSIParameter;
|
|
|
|
// RF parameter
|
|
priv->PHYRegDef[RF90_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter; //BB Band Select
|
|
priv->PHYRegDef[RF90_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter;
|
|
priv->PHYRegDef[RF90_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter;
|
|
priv->PHYRegDef[RF90_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter;
|
|
|
|
// Tx AGC Gain Stage (same for all path. Should we remove this?)
|
|
priv->PHYRegDef[RF90_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
|
|
priv->PHYRegDef[RF90_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
|
|
priv->PHYRegDef[RF90_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
|
|
priv->PHYRegDef[RF90_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage
|
|
|
|
// Tranceiver A~D HSSI Parameter-1
|
|
priv->PHYRegDef[RF90_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1; //wire control parameter1
|
|
priv->PHYRegDef[RF90_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1; //wire control parameter1
|
|
priv->PHYRegDef[RF90_PATH_C].rfHSSIPara1 = rFPGA0_XC_HSSIParameter1; //wire control parameter1
|
|
priv->PHYRegDef[RF90_PATH_D].rfHSSIPara1 = rFPGA0_XD_HSSIParameter1; //wire control parameter1
|
|
|
|
// Tranceiver A~D HSSI Parameter-2
|
|
priv->PHYRegDef[RF90_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2; //wire control parameter2
|
|
priv->PHYRegDef[RF90_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2; //wire control parameter2
|
|
priv->PHYRegDef[RF90_PATH_C].rfHSSIPara2 = rFPGA0_XC_HSSIParameter2; //wire control parameter2
|
|
priv->PHYRegDef[RF90_PATH_D].rfHSSIPara2 = rFPGA0_XD_HSSIParameter2; //wire control parameter1
|
|
|
|
// RF switch Control
|
|
priv->PHYRegDef[RF90_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; //TR/Ant switch control
|
|
priv->PHYRegDef[RF90_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl;
|
|
priv->PHYRegDef[RF90_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl;
|
|
priv->PHYRegDef[RF90_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl;
|
|
|
|
// AGC control 1
|
|
priv->PHYRegDef[RF90_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1;
|
|
priv->PHYRegDef[RF90_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1;
|
|
priv->PHYRegDef[RF90_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1;
|
|
priv->PHYRegDef[RF90_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1;
|
|
|
|
// AGC control 2
|
|
priv->PHYRegDef[RF90_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2;
|
|
priv->PHYRegDef[RF90_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2;
|
|
priv->PHYRegDef[RF90_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2;
|
|
priv->PHYRegDef[RF90_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2;
|
|
|
|
// RX AFE control 1
|
|
priv->PHYRegDef[RF90_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance;
|
|
priv->PHYRegDef[RF90_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance;
|
|
priv->PHYRegDef[RF90_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance;
|
|
priv->PHYRegDef[RF90_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance;
|
|
|
|
// RX AFE control 1
|
|
priv->PHYRegDef[RF90_PATH_A].rfRxAFE = rOFDM0_XARxAFE;
|
|
priv->PHYRegDef[RF90_PATH_B].rfRxAFE = rOFDM0_XBRxAFE;
|
|
priv->PHYRegDef[RF90_PATH_C].rfRxAFE = rOFDM0_XCRxAFE;
|
|
priv->PHYRegDef[RF90_PATH_D].rfRxAFE = rOFDM0_XDRxAFE;
|
|
|
|
// Tx AFE control 1
|
|
priv->PHYRegDef[RF90_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance;
|
|
priv->PHYRegDef[RF90_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance;
|
|
priv->PHYRegDef[RF90_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance;
|
|
priv->PHYRegDef[RF90_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance;
|
|
|
|
// Tx AFE control 2
|
|
priv->PHYRegDef[RF90_PATH_A].rfTxAFE = rOFDM0_XATxAFE;
|
|
priv->PHYRegDef[RF90_PATH_B].rfTxAFE = rOFDM0_XBTxAFE;
|
|
priv->PHYRegDef[RF90_PATH_C].rfTxAFE = rOFDM0_XCTxAFE;
|
|
priv->PHYRegDef[RF90_PATH_D].rfTxAFE = rOFDM0_XDTxAFE;
|
|
|
|
// Tranceiver LSSI Readback SI mode
|
|
priv->PHYRegDef[RF90_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack;
|
|
priv->PHYRegDef[RF90_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack;
|
|
priv->PHYRegDef[RF90_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack;
|
|
priv->PHYRegDef[RF90_PATH_D].rfLSSIReadBack = rFPGA0_XD_LSSIReadBack;
|
|
|
|
// Tranceiver LSSI Readback PI mode
|
|
priv->PHYRegDef[RF90_PATH_A].rfLSSIReadBackPi = TransceiverA_HSPI_Readback;
|
|
priv->PHYRegDef[RF90_PATH_B].rfLSSIReadBackPi = TransceiverB_HSPI_Readback;
|
|
//pHalData->PHYRegDef[RF90_PATH_C].rfLSSIReadBackPi = rFPGA0_XC_LSSIReadBack;
|
|
//pHalData->PHYRegDef[RF90_PATH_D].rfLSSIReadBackPi = rFPGA0_XD_LSSIReadBack;
|
|
|
|
}
|
|
|
|
|
|
//
|
|
// Description: Change RF power state.
|
|
//
|
|
// Assumption: This function must be executed in re-schdulable context,
|
|
// ie. PASSIVE_LEVEL.
|
|
//
|
|
// 050823, by rcnjko.
|
|
//not understand it seem's use in init
|
|
//SetHwReg8192SUsb--->HalFunc.SetHwRegHandler
|
|
bool PHY_SetRFPowerState(struct net_device* dev, RT_RF_POWER_STATE eRFPowerState)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
bool bResult = FALSE;
|
|
|
|
RT_TRACE(COMP_RF, "---------> PHY_SetRFPowerState(): eRFPowerState(%d)\n", eRFPowerState);
|
|
|
|
if(eRFPowerState == priv->ieee80211->eRFPowerState)
|
|
{
|
|
RT_TRACE(COMP_RF, "<--------- PHY_SetRFPowerState(): discard the request for eRFPowerState(%d) is the same.\n", eRFPowerState);
|
|
return bResult;
|
|
}
|
|
|
|
bResult = phy_SetRFPowerState8192SU(dev, eRFPowerState);
|
|
|
|
RT_TRACE(COMP_RF, "<--------- PHY_SetRFPowerState(): bResult(%d)\n", bResult);
|
|
|
|
return bResult;
|
|
}
|
|
|
|
//use in phy only
|
|
static bool phy_SetRFPowerState8192SU(struct net_device* dev,RT_RF_POWER_STATE eRFPowerState)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
bool bResult = TRUE;
|
|
//u8 eRFPath;
|
|
//u8 i, QueueID;
|
|
u8 u1bTmp;
|
|
|
|
if(priv->SetRFPowerStateInProgress == TRUE)
|
|
return FALSE;
|
|
|
|
priv->SetRFPowerStateInProgress = TRUE;
|
|
|
|
switch(priv->rf_chip )
|
|
{
|
|
default:
|
|
switch( eRFPowerState )
|
|
{
|
|
case eRfOn:
|
|
write_nic_dword(dev, WFM5, FW_BB_RESET_ENABLE);
|
|
write_nic_word(dev, CMDR, 0x37FC);
|
|
write_nic_byte(dev, PHY_CCA, 0x3);
|
|
write_nic_byte(dev, TXPAUSE, 0x00);
|
|
write_nic_byte(dev, SPS1_CTRL, 0x64);
|
|
break;
|
|
|
|
//
|
|
// In current solution, RFSleep=RFOff in order to save power under 802.11 power save.
|
|
// By Bruce, 2008-01-16.
|
|
//
|
|
case eRfSleep:
|
|
case eRfOff:
|
|
if (priv->ieee80211->eRFPowerState == eRfSleep || priv->ieee80211->eRFPowerState == eRfOff)
|
|
break;
|
|
//
|
|
//RF Off/Sleep sequence. Designed/tested from SD4 Scott, SD1 Grent and Jonbon.
|
|
// Added by Bruce, 2008-11-22.
|
|
//
|
|
//==================================================================
|
|
// (0) Disable FW BB reset checking
|
|
write_nic_dword(dev, WFM5, FW_BB_RESET_DISABLE);
|
|
|
|
// (1) Switching Power Supply Register : Disable LD12 & SW12 (for IT)
|
|
u1bTmp = read_nic_byte(dev, LDOV12D_CTRL);
|
|
u1bTmp |= BIT0;
|
|
write_nic_byte(dev, LDOV12D_CTRL, u1bTmp);
|
|
|
|
write_nic_byte(dev, SPS1_CTRL, 0x0);
|
|
write_nic_byte(dev, TXPAUSE, 0xFF);
|
|
|
|
// (2) MAC Tx/Rx enable, BB enable, CCK/OFDM enable
|
|
write_nic_word(dev, CMDR, 0x77FC);
|
|
write_nic_byte(dev, PHY_CCA, 0x0);
|
|
udelay(100);
|
|
|
|
write_nic_word(dev, CMDR, 0x37FC);
|
|
udelay(10);
|
|
|
|
write_nic_word(dev, CMDR, 0x77FC);
|
|
udelay(10);
|
|
|
|
// (3) Reset BB TRX blocks
|
|
write_nic_word(dev, CMDR, 0x57FC);
|
|
break;
|
|
|
|
default:
|
|
bResult = FALSE;
|
|
//RT_ASSERT(FALSE, ("phy_SetRFPowerState8192SU(): unknown state to set: 0x%X!!!\n", eRFPowerState));
|
|
break;
|
|
}
|
|
break;
|
|
|
|
}
|
|
priv->ieee80211->eRFPowerState = eRFPowerState;
|
|
#ifdef TO_DO_LIST
|
|
if(bResult)
|
|
{
|
|
// Update current RF state variable.
|
|
priv->ieee80211->eRFPowerState = eRFPowerState;
|
|
|
|
switch(priv->rf_chip )
|
|
{
|
|
case RF_8256:
|
|
switch(priv->ieee80211->eRFPowerState)
|
|
{
|
|
case eRfOff:
|
|
//
|
|
//If Rf off reason is from IPS, Led should blink with no link, by Maddest 071015
|
|
//
|
|
if(pMgntInfo->RfOffReason==RF_CHANGE_BY_IPS )
|
|
{
|
|
dev->HalFunc.LedControlHandler(dev,LED_CTL_NO_LINK);
|
|
}
|
|
else
|
|
{
|
|
// Turn off LED if RF is not ON.
|
|
dev->HalFunc.LedControlHandler(dev, LED_CTL_POWER_OFF);
|
|
}
|
|
break;
|
|
|
|
case eRfOn:
|
|
// Turn on RF we are still linked, which might happen when
|
|
// we quickly turn off and on HW RF. 2006.05.12, by rcnjko.
|
|
if( pMgntInfo->bMediaConnect == TRUE )
|
|
{
|
|
dev->HalFunc.LedControlHandler(dev, LED_CTL_LINK);
|
|
}
|
|
else
|
|
{
|
|
// Turn off LED if RF is not ON.
|
|
dev->HalFunc.LedControlHandler(dev, LED_CTL_NO_LINK);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
// do nothing.
|
|
break;
|
|
}// Switch RF state
|
|
|
|
break;
|
|
|
|
default:
|
|
RT_TRACE(COMP_RF, "phy_SetRFPowerState8192SU(): Unknown RF type\n");
|
|
break;
|
|
}// Switch rf_chip
|
|
}
|
|
#endif
|
|
priv->SetRFPowerStateInProgress = FALSE;
|
|
|
|
return bResult;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: GetTxPowerLevel8190()
|
|
*
|
|
* Overview: This function is export to "common" moudule
|
|
*
|
|
* Input: PADAPTER Adapter
|
|
* psByte Power Level
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: NONE
|
|
*
|
|
*---------------------------------------------------------------------------*/
|
|
// no use temp
|
|
void
|
|
PHY_GetTxPowerLevel8192S(
|
|
struct net_device* dev,
|
|
long* powerlevel
|
|
)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 TxPwrLevel = 0;
|
|
long TxPwrDbm;
|
|
//
|
|
// Because the Tx power indexes are different, we report the maximum of them to
|
|
// meet the CCX TPC request. By Bruce, 2008-01-31.
|
|
//
|
|
|
|
// CCK
|
|
TxPwrLevel = priv->CurrentCckTxPwrIdx;
|
|
TxPwrDbm = phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_B, TxPwrLevel);
|
|
|
|
// Legacy OFDM
|
|
TxPwrLevel = priv->CurrentOfdm24GTxPwrIdx + priv->LegacyHTTxPowerDiff;
|
|
|
|
// Compare with Legacy OFDM Tx power.
|
|
if(phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_G, TxPwrLevel) > TxPwrDbm)
|
|
TxPwrDbm = phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_G, TxPwrLevel);
|
|
|
|
// HT OFDM
|
|
TxPwrLevel = priv->CurrentOfdm24GTxPwrIdx;
|
|
|
|
// Compare with HT OFDM Tx power.
|
|
if(phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_N_24G, TxPwrLevel) > TxPwrDbm)
|
|
TxPwrDbm = phy_TxPwrIdxToDbm(dev, WIRELESS_MODE_N_24G, TxPwrLevel);
|
|
|
|
*powerlevel = TxPwrDbm;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: SetTxPowerLevel8190()
|
|
*
|
|
* Overview: This function is export to "HalCommon" moudule
|
|
*
|
|
* Input: PADAPTER Adapter
|
|
* u1Byte channel
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: NONE
|
|
* 2008/11/04 MHC We remove EEPROM_93C56.
|
|
* We need to move CCX relative code to independet file.
|
|
* 2009/01/21 MHC Support new EEPROM format from SD3 requirement.
|
|
*---------------------------------------------------------------------------*/
|
|
void PHY_SetTxPowerLevel8192S(struct net_device* dev, u8 channel)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
//HAL_DATA_TYPE *pHalData = GET_HAL_DATA(dev);
|
|
u8 powerlevel = (u8)EEPROM_Default_TxPower, powerlevelOFDM24G = 0x10;
|
|
s8 ant_pwr_diff = 0;
|
|
u32 u4RegValue;
|
|
u8 index = (channel -1);
|
|
// 2009/01/22 MH Add for new EEPROM format from SD3
|
|
u8 pwrdiff[2] = {0};
|
|
u8 ht20pwr[2] = {0}, ht40pwr[2] = {0};
|
|
u8 rfpath = 0, rfpathnum = 2;
|
|
|
|
if(priv->bTXPowerDataReadFromEEPORM == FALSE)
|
|
return;
|
|
|
|
/*
|
|
* Read predefined TX power index in EEPROM
|
|
*/
|
|
{
|
|
//
|
|
// Mainly we use RF-A Tx Power to write the Tx Power registers, but the RF-B Tx
|
|
// Power must be calculated by the antenna diff.
|
|
// So we have to rewrite Antenna gain offset register here.
|
|
// Please refer to BB register 0x80c
|
|
// 1. For CCK.
|
|
// 2. For OFDM 1T or 2T
|
|
//
|
|
|
|
// 1. CCK
|
|
powerlevel = priv->RfTxPwrLevelCck[0][index];
|
|
|
|
if (priv->rf_type == RF_1T2R || priv->rf_type == RF_1T1R)
|
|
{
|
|
// Read HT 40 OFDM TX power
|
|
powerlevelOFDM24G = priv->RfTxPwrLevelOfdm1T[0][index];
|
|
// RF B HT OFDM pwr-RFA HT OFDM pwr
|
|
// Only one RF we need not to decide B <-> A pwr diff
|
|
|
|
// Legacy<->HT pwr diff, we only care about path A.
|
|
|
|
// We only assume 1T as RF path A
|
|
rfpathnum = 1;
|
|
ht20pwr[0] = ht40pwr[0] = priv->RfTxPwrLevelOfdm1T[0][index];
|
|
}
|
|
else if (priv->rf_type == RF_2T2R)
|
|
{
|
|
// Read HT 40 OFDM TX power
|
|
powerlevelOFDM24G = priv->RfTxPwrLevelOfdm2T[0][index];
|
|
// RF B HT OFDM pwr-RFA HT OFDM pwr
|
|
ant_pwr_diff = priv->RfTxPwrLevelOfdm2T[1][index] -
|
|
priv->RfTxPwrLevelOfdm2T[0][index];
|
|
// RF B (HT OFDM pwr+legacy-ht-diff) -(RFA HT OFDM pwr+legacy-ht-diff)
|
|
// We can not handle Path B&A HT/Legacy pwr diff for 92S now.
|
|
|
|
//RTPRINT(FPHY, PHY_TXPWR, ("CH-%d HT40 A/B Pwr index = %x/%x(%d/%d)\n",
|
|
//channel, priv->RfTxPwrLevelOfdm2T[0][index],
|
|
//priv->RfTxPwrLevelOfdm2T[1][index],
|
|
//priv->RfTxPwrLevelOfdm2T[0][index],
|
|
//priv->RfTxPwrLevelOfdm2T[1][index]));
|
|
|
|
ht20pwr[0] = ht40pwr[0] = priv->RfTxPwrLevelOfdm2T[0][index];
|
|
ht20pwr[1] = ht40pwr[1] = priv->RfTxPwrLevelOfdm2T[1][index];
|
|
}
|
|
|
|
//
|
|
// 2009/01/21 MH Support new EEPROM format from SD3 requirement
|
|
// 2009/02/10 Cosa, Here is only for reg B/C/D to A gain diff.
|
|
//
|
|
if (priv->EEPROMVersion == 2) // Defined by SD1 Jong
|
|
{
|
|
if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
|
|
{
|
|
for (rfpath = 0; rfpath < rfpathnum; rfpath++)
|
|
{
|
|
// HT 20<->40 pwr diff
|
|
pwrdiff[rfpath] = priv->TxPwrHt20Diff[rfpath][index];
|
|
|
|
// Calculate Antenna pwr diff
|
|
if (pwrdiff[rfpath] < 8) // 0~+7
|
|
{
|
|
ht20pwr[rfpath] += pwrdiff[rfpath];
|
|
}
|
|
else // index8-15=-8~-1
|
|
{
|
|
ht20pwr[rfpath] -= (15-pwrdiff[rfpath]);
|
|
}
|
|
}
|
|
|
|
// RF B HT OFDM pwr-RFA HT OFDM pwr
|
|
if (priv->rf_type == RF_2T2R)
|
|
ant_pwr_diff = ht20pwr[1] - ht20pwr[0];
|
|
|
|
//RTPRINT(FPHY, PHY_TXPWR,
|
|
//("HT20 to HT40 pwrdiff[A/B]=%d/%d, ant_pwr_diff=%d(B-A=%d-%d)\n",
|
|
//pwrdiff[0], pwrdiff[1], ant_pwr_diff, ht20pwr[1], ht20pwr[0]));
|
|
}
|
|
|
|
// Band Edge scheme is enabled for FCC mode
|
|
if (priv->TxPwrbandEdgeFlag == 1/* && pHalData->ChannelPlan == 0*/)
|
|
{
|
|
for (rfpath = 0; rfpath < rfpathnum; rfpath++)
|
|
{
|
|
pwrdiff[rfpath] = 0;
|
|
if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
|
|
{
|
|
if (channel <= 3)
|
|
pwrdiff[rfpath] = priv->TxPwrbandEdgeHt40[rfpath][0];
|
|
else if (channel >= 9)
|
|
pwrdiff[rfpath] = priv->TxPwrbandEdgeHt40[rfpath][1];
|
|
else
|
|
pwrdiff[rfpath] = 0;
|
|
|
|
ht40pwr[rfpath] -= pwrdiff[rfpath];
|
|
}
|
|
else if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
|
|
{
|
|
if (channel == 1)
|
|
pwrdiff[rfpath] = priv->TxPwrbandEdgeHt20[rfpath][0];
|
|
else if (channel >= 11)
|
|
pwrdiff[rfpath] = priv->TxPwrbandEdgeHt20[rfpath][1];
|
|
else
|
|
pwrdiff[rfpath] = 0;
|
|
|
|
ht20pwr[rfpath] -= pwrdiff[rfpath];
|
|
}
|
|
}
|
|
|
|
if (priv->rf_type == RF_2T2R)
|
|
{
|
|
// HT 20/40 must decide if they need to minus BD pwr offset
|
|
if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
|
|
ant_pwr_diff = ht40pwr[1] - ht40pwr[0];
|
|
else
|
|
ant_pwr_diff = ht20pwr[1] - ht20pwr[0];
|
|
}
|
|
if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20)
|
|
{
|
|
if (channel <= 1 || channel >= 11)
|
|
{
|
|
//RTPRINT(FPHY, PHY_TXPWR,
|
|
//("HT20 Band-edge pwrdiff[A/B]=%d/%d, ant_pwr_diff=%d(B-A=%d-%d)\n",
|
|
//pwrdiff[0], pwrdiff[1], ant_pwr_diff, ht20pwr[1], ht20pwr[0]));
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (channel <= 3 || channel >= 9)
|
|
{
|
|
//RTPRINT(FPHY, PHY_TXPWR,
|
|
//("HT40 Band-edge pwrdiff[A/B]=%d/%d, ant_pwr_diff=%d(B-A=%d-%d)\n",
|
|
//pwrdiff[0], pwrdiff[1], ant_pwr_diff, ht40pwr[1], ht40pwr[0]));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
//Cosa added for protection, the reg rFPGA0_TxGainStage
|
|
// range is from 7~-8, index = 0x0~0xf
|
|
if(ant_pwr_diff > 7)
|
|
ant_pwr_diff = 7;
|
|
if(ant_pwr_diff < -8)
|
|
ant_pwr_diff = -8;
|
|
|
|
//RTPRINT(FPHY, PHY_TXPWR,
|
|
//("CCK/HT Power index = %x/%x(%d/%d), ant_pwr_diff=%d\n",
|
|
//powerlevel, powerlevelOFDM24G, powerlevel, powerlevelOFDM24G, ant_pwr_diff));
|
|
|
|
ant_pwr_diff &= 0xf;
|
|
|
|
// Antenna TX power difference
|
|
priv->AntennaTxPwDiff[2] = 0;// RF-D, don't care
|
|
priv->AntennaTxPwDiff[1] = 0;// RF-C, don't care
|
|
priv->AntennaTxPwDiff[0] = (u8)(ant_pwr_diff); // RF-B
|
|
|
|
// Antenna gain offset from B/C/D to A
|
|
u4RegValue = ( priv->AntennaTxPwDiff[2]<<8 |
|
|
priv->AntennaTxPwDiff[1]<<4 |
|
|
priv->AntennaTxPwDiff[0] );
|
|
|
|
// Notify Tx power difference for B/C/D to A!!!
|
|
rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC|bXDTxAGC), u4RegValue);
|
|
}
|
|
|
|
//
|
|
// CCX 2 S31, AP control of client transmit power:
|
|
// 1. We shall not exceed Cell Power Limit as possible as we can.
|
|
// 2. Tolerance is +/- 5dB.
|
|
// 3. 802.11h Power Contraint takes higher precedence over CCX Cell Power Limit.
|
|
//
|
|
// TODO:
|
|
// 1. 802.11h power contraint
|
|
//
|
|
// 071011, by rcnjko.
|
|
//
|
|
#ifdef TODO //WB, 11h has not implemented now.
|
|
if( priv->ieee80211->iw_mode != IW_MODE_INFRA && priv->bWithCcxCellPwr &&
|
|
channel == priv->ieee80211->current_network.channel)// & priv->ieee80211->mAssoc )
|
|
{
|
|
u8 CckCellPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_B, priv->CcxCellPwr);
|
|
u8 LegacyOfdmCellPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_G, priv->CcxCellPwr);
|
|
u8 OfdmCellPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_N_24G, priv->CcxCellPwr);
|
|
|
|
RT_TRACE(COMP_TXAGC,
|
|
("CCX Cell Limit: %d dbm => CCK Tx power index : %d, Legacy OFDM Tx power index : %d, OFDM Tx power index: %d\n",
|
|
priv->CcxCellPwr, CckCellPwrIdx, LegacyOfdmCellPwrIdx, OfdmCellPwrIdx));
|
|
RT_TRACE(COMP_TXAGC,
|
|
("EEPROM channel(%d) => CCK Tx power index: %d, Legacy OFDM Tx power index : %d, OFDM Tx power index: %d\n",
|
|
channel, powerlevel, powerlevelOFDM24G + priv->LegacyHTTxPowerDiff, powerlevelOFDM24G));
|
|
|
|
// CCK
|
|
if(powerlevel > CckCellPwrIdx)
|
|
powerlevel = CckCellPwrIdx;
|
|
// Legacy OFDM, HT OFDM
|
|
if(powerlevelOFDM24G + priv->LegacyHTTxPowerDiff > LegacyOfdmCellPwrIdx)
|
|
{
|
|
if((OfdmCellPwrIdx - priv->LegacyHTTxPowerDiff) > 0)
|
|
{
|
|
powerlevelOFDM24G = OfdmCellPwrIdx - priv->LegacyHTTxPowerDiff;
|
|
}
|
|
else
|
|
{
|
|
powerlevelOFDM24G = 0;
|
|
}
|
|
}
|
|
|
|
RT_TRACE(COMP_TXAGC,
|
|
("Altered CCK Tx power index : %d, Legacy OFDM Tx power index: %d, OFDM Tx power index: %d\n",
|
|
powerlevel, powerlevelOFDM24G + priv->LegacyHTTxPowerDiff, powerlevelOFDM24G));
|
|
}
|
|
#endif
|
|
|
|
priv->CurrentCckTxPwrIdx = powerlevel;
|
|
priv->CurrentOfdm24GTxPwrIdx = powerlevelOFDM24G;
|
|
|
|
switch(priv->rf_chip)
|
|
{
|
|
case RF_8225:
|
|
//PHY_SetRF8225CckTxPower(dev, powerlevel);
|
|
//PHY_SetRF8225OfdmTxPower(dev, powerlevelOFDM24G);
|
|
break;
|
|
|
|
case RF_8256:
|
|
break;
|
|
|
|
case RF_6052:
|
|
PHY_RF6052SetCckTxPower(dev, powerlevel);
|
|
PHY_RF6052SetOFDMTxPower(dev, powerlevelOFDM24G);
|
|
break;
|
|
|
|
case RF_8258:
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
//
|
|
// Description:
|
|
// Update transmit power level of all channel supported.
|
|
//
|
|
// TODO:
|
|
// A mode.
|
|
// By Bruce, 2008-02-04.
|
|
// no use temp
|
|
bool PHY_UpdateTxPowerDbm8192S(struct net_device* dev, long powerInDbm)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 idx;
|
|
u8 rf_path;
|
|
|
|
// TODO: A mode Tx power.
|
|
u8 CckTxPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_B, powerInDbm);
|
|
u8 OfdmTxPwrIdx = phy_DbmToTxPwrIdx(dev, WIRELESS_MODE_N_24G, powerInDbm);
|
|
|
|
if(OfdmTxPwrIdx - priv->LegacyHTTxPowerDiff > 0)
|
|
OfdmTxPwrIdx -= priv->LegacyHTTxPowerDiff;
|
|
else
|
|
OfdmTxPwrIdx = 0;
|
|
|
|
for(idx = 0; idx < 14; idx++)
|
|
{
|
|
priv->TxPowerLevelCCK[idx] = CckTxPwrIdx;
|
|
priv->TxPowerLevelCCK_A[idx] = CckTxPwrIdx;
|
|
priv->TxPowerLevelCCK_C[idx] = CckTxPwrIdx;
|
|
priv->TxPowerLevelOFDM24G[idx] = OfdmTxPwrIdx;
|
|
priv->TxPowerLevelOFDM24G_A[idx] = OfdmTxPwrIdx;
|
|
priv->TxPowerLevelOFDM24G_C[idx] = OfdmTxPwrIdx;
|
|
|
|
for (rf_path = 0; rf_path < 2; rf_path++)
|
|
{
|
|
priv->RfTxPwrLevelCck[rf_path][idx] = CckTxPwrIdx;
|
|
priv->RfTxPwrLevelOfdm1T[rf_path][idx] = \
|
|
priv->RfTxPwrLevelOfdm2T[rf_path][idx] = OfdmTxPwrIdx;
|
|
}
|
|
}
|
|
|
|
PHY_SetTxPowerLevel8192S(dev, priv->chan);
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
/*
|
|
Description:
|
|
When beacon interval is changed, the values of the
|
|
hw registers should be modified.
|
|
By tynli, 2008.10.24.
|
|
|
|
*/
|
|
|
|
extern void PHY_SetBeaconHwReg( struct net_device* dev, u16 BeaconInterval)
|
|
{
|
|
u32 NewBeaconNum;
|
|
|
|
NewBeaconNum = BeaconInterval *32 - 64;
|
|
//PlatformEFIOWrite4Byte(Adapter, WFM3+4, NewBeaconNum);
|
|
//PlatformEFIOWrite4Byte(Adapter, WFM3, 0xB026007C);
|
|
write_nic_dword(dev, WFM3+4, NewBeaconNum);
|
|
write_nic_dword(dev, WFM3, 0xB026007C);
|
|
}
|
|
|
|
//
|
|
// Description:
|
|
// Map dBm into Tx power index according to
|
|
// current HW model, for example, RF and PA, and
|
|
// current wireless mode.
|
|
// By Bruce, 2008-01-29.
|
|
// use in phy only
|
|
static u8 phy_DbmToTxPwrIdx(
|
|
struct net_device* dev,
|
|
WIRELESS_MODE WirelessMode,
|
|
long PowerInDbm
|
|
)
|
|
{
|
|
//struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 TxPwrIdx = 0;
|
|
long Offset = 0;
|
|
|
|
|
|
//
|
|
// Tested by MP, we found that CCK Index 0 equals to -7dbm, OFDM legacy equals to
|
|
// 3dbm, and OFDM HT equals to 0dbm repectively.
|
|
// Note:
|
|
// The mapping may be different by different NICs. Do not use this formula for what needs accurate result.
|
|
// By Bruce, 2008-01-29.
|
|
//
|
|
switch(WirelessMode)
|
|
{
|
|
case WIRELESS_MODE_B:
|
|
Offset = -7;
|
|
break;
|
|
|
|
case WIRELESS_MODE_G:
|
|
case WIRELESS_MODE_N_24G:
|
|
Offset = -8;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if((PowerInDbm - Offset) > 0)
|
|
{
|
|
TxPwrIdx = (u8)((PowerInDbm - Offset) * 2);
|
|
}
|
|
else
|
|
{
|
|
TxPwrIdx = 0;
|
|
}
|
|
|
|
// Tx Power Index is too large.
|
|
if(TxPwrIdx > MAX_TXPWR_IDX_NMODE_92S)
|
|
TxPwrIdx = MAX_TXPWR_IDX_NMODE_92S;
|
|
|
|
return TxPwrIdx;
|
|
}
|
|
//
|
|
// Description:
|
|
// Map Tx power index into dBm according to
|
|
// current HW model, for example, RF and PA, and
|
|
// current wireless mode.
|
|
// By Bruce, 2008-01-29.
|
|
// use in phy only
|
|
static long phy_TxPwrIdxToDbm(
|
|
struct net_device* dev,
|
|
WIRELESS_MODE WirelessMode,
|
|
u8 TxPwrIdx
|
|
)
|
|
{
|
|
//struct r8192_priv *priv = ieee80211_priv(dev);
|
|
long Offset = 0;
|
|
long PwrOutDbm = 0;
|
|
|
|
//
|
|
// Tested by MP, we found that CCK Index 0 equals to -7dbm, OFDM legacy equals to
|
|
// 3dbm, and OFDM HT equals to 0dbm repectively.
|
|
// Note:
|
|
// The mapping may be different by different NICs. Do not use this formula for what needs accurate result.
|
|
// By Bruce, 2008-01-29.
|
|
//
|
|
switch(WirelessMode)
|
|
{
|
|
case WIRELESS_MODE_B:
|
|
Offset = -7;
|
|
break;
|
|
|
|
case WIRELESS_MODE_G:
|
|
case WIRELESS_MODE_N_24G:
|
|
Offset = -8;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
PwrOutDbm = TxPwrIdx / 2 + Offset; // Discard the decimal part.
|
|
|
|
return PwrOutDbm;
|
|
}
|
|
|
|
#ifdef TO_DO_LIST
|
|
extern VOID
|
|
PHY_ScanOperationBackup8192S(
|
|
IN PADAPTER Adapter,
|
|
IN u1Byte Operation
|
|
)
|
|
{
|
|
|
|
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
|
|
PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo);
|
|
u4Byte BitMask;
|
|
u1Byte initial_gain;
|
|
|
|
|
|
|
|
|
|
|
|
if(!Adapter->bDriverStopped)
|
|
{
|
|
switch(Operation)
|
|
{
|
|
case SCAN_OPT_BACKUP:
|
|
//
|
|
// <Roger_Notes> We halt FW DIG and disable high ppower both two DMs here
|
|
// and resume both two DMs while scan complete.
|
|
// 2008.11.27.
|
|
//
|
|
Adapter->HalFunc.SetFwCmdHandler(Adapter, FW_CMD_PAUSE_DM_BY_SCAN);
|
|
break;
|
|
|
|
case SCAN_OPT_RESTORE:
|
|
//
|
|
// <Roger_Notes> We resume DIG and enable high power both two DMs here and
|
|
// recover earlier DIG settings.
|
|
// 2008.11.27.
|
|
//
|
|
Adapter->HalFunc.SetFwCmdHandler(Adapter, FW_CMD_RESUME_DM_BY_SCAN);
|
|
break;
|
|
|
|
default:
|
|
RT_TRACE(COMP_SCAN, DBG_LOUD, ("Unknown Scan Backup Operation. \n"));
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
//nouse temp
|
|
void PHY_InitialGain8192S(struct net_device* dev,u8 Operation )
|
|
{
|
|
|
|
//struct r8192_priv *priv = ieee80211_priv(dev);
|
|
//u32 BitMask;
|
|
//u8 initial_gain;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: SetBWModeCallback8190Pci()
|
|
*
|
|
* Overview: Timer callback function for SetSetBWMode
|
|
*
|
|
* Input: PRT_TIMER pTimer
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: NONE
|
|
*
|
|
* Note: (1) We do not take j mode into consideration now
|
|
* (2) Will two workitem of "switch channel" and "switch channel bandwidth" run
|
|
* concurrently?
|
|
*---------------------------------------------------------------------------*/
|
|
// use in phy only (in win it's timer)
|
|
void PHY_SetBWModeCallback8192S(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 regBwOpMode;
|
|
|
|
//return;
|
|
|
|
// Added it for 20/40 mhz switch time evaluation by guangan 070531
|
|
//u32 NowL, NowH;
|
|
//u8Byte BeginTime, EndTime;
|
|
u8 regRRSR_RSC;
|
|
|
|
RT_TRACE(COMP_SWBW, "==>SetBWModeCallback8190Pci() Switch to %s bandwidth\n", \
|
|
priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz");
|
|
|
|
if(priv->rf_chip == RF_PSEUDO_11N)
|
|
{
|
|
priv->SetBWModeInProgress= FALSE;
|
|
return;
|
|
}
|
|
|
|
if(!priv->up)
|
|
return;
|
|
|
|
// Added it for 20/40 mhz switch time evaluation by guangan 070531
|
|
//NowL = read_nic_dword(dev, TSFR);
|
|
//NowH = read_nic_dword(dev, TSFR+4);
|
|
//BeginTime = ((u8Byte)NowH << 32) + NowL;
|
|
|
|
//3//
|
|
//3//<1>Set MAC register
|
|
//3//
|
|
regBwOpMode = read_nic_byte(dev, BW_OPMODE);
|
|
regRRSR_RSC = read_nic_byte(dev, RRSR+2);
|
|
|
|
switch(priv->CurrentChannelBW)
|
|
{
|
|
case HT_CHANNEL_WIDTH_20:
|
|
//if(priv->card_8192_version >= VERSION_8192S_BCUT)
|
|
// write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x58);
|
|
|
|
regBwOpMode |= BW_OPMODE_20MHZ;
|
|
// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
|
|
write_nic_byte(dev, BW_OPMODE, regBwOpMode);
|
|
break;
|
|
|
|
case HT_CHANNEL_WIDTH_20_40:
|
|
//if(priv->card_8192_version >= VERSION_8192S_BCUT)
|
|
// write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x18);
|
|
|
|
regBwOpMode &= ~BW_OPMODE_20MHZ;
|
|
// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
|
|
write_nic_byte(dev, BW_OPMODE, regBwOpMode);
|
|
regRRSR_RSC = (regRRSR_RSC&0x90) |(priv->nCur40MhzPrimeSC<<5);
|
|
write_nic_byte(dev, RRSR+2, regRRSR_RSC);
|
|
break;
|
|
|
|
default:
|
|
RT_TRACE(COMP_DBG, "SetBWModeCallback8190Pci(): unknown Bandwidth: %#X\n",
|
|
priv->CurrentChannelBW);
|
|
break;
|
|
}
|
|
|
|
//3//
|
|
//3//<2>Set PHY related register
|
|
//3//
|
|
switch(priv->CurrentChannelBW)
|
|
{
|
|
/* 20 MHz channel*/
|
|
case HT_CHANNEL_WIDTH_20:
|
|
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0);
|
|
rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0);
|
|
|
|
// Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207
|
|
// It is set in Tx descriptor for 8192x series
|
|
//write_nic_dword(dev, rCCK0_TxFilter1, 0x1a1b0000);
|
|
//write_nic_dword(dev, rCCK0_TxFilter2, 0x090e1317);
|
|
//write_nic_dword(dev, rCCK0_DebugPort, 0x00000204);
|
|
|
|
if (priv->card_8192_version >= VERSION_8192S_BCUT)
|
|
write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x58);
|
|
|
|
|
|
break;
|
|
|
|
/* 40 MHz channel*/
|
|
case HT_CHANNEL_WIDTH_20_40:
|
|
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1);
|
|
rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1);
|
|
|
|
// Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207
|
|
//write_nic_dword(dev, rCCK0_TxFilter1, 0x35360000);
|
|
//write_nic_dword(dev, rCCK0_TxFilter2, 0x121c252e);
|
|
//write_nic_dword(dev, rCCK0_DebugPort, 0x00000409);
|
|
|
|
// Set Control channel to upper or lower. These settings are required only for 40MHz
|
|
rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
|
|
rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
|
|
|
|
//rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3);
|
|
if (priv->card_8192_version >= VERSION_8192S_BCUT)
|
|
write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x18);
|
|
|
|
break;
|
|
|
|
default:
|
|
RT_TRACE(COMP_DBG, "SetBWModeCallback8190Pci(): unknown Bandwidth: %#X\n"\
|
|
,priv->CurrentChannelBW);
|
|
break;
|
|
|
|
}
|
|
//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
|
|
|
|
// Added it for 20/40 mhz switch time evaluation by guangan 070531
|
|
//NowL = read_nic_dword(dev, TSFR);
|
|
//NowH = read_nic_dword(dev, TSFR+4);
|
|
//EndTime = ((u8Byte)NowH << 32) + NowL;
|
|
//RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWModeCallback8190Pci: time of SetBWMode = %I64d us!\n", (EndTime - BeginTime)));
|
|
|
|
//3<3>Set RF related register
|
|
switch( priv->rf_chip )
|
|
{
|
|
case RF_8225:
|
|
//PHY_SetRF8225Bandwidth(dev, priv->CurrentChannelBW);
|
|
break;
|
|
|
|
case RF_8256:
|
|
// Please implement this function in Hal8190PciPhy8256.c
|
|
//PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW);
|
|
break;
|
|
|
|
case RF_8258:
|
|
// Please implement this function in Hal8190PciPhy8258.c
|
|
// PHY_SetRF8258Bandwidth();
|
|
break;
|
|
|
|
case RF_PSEUDO_11N:
|
|
// Do Nothing
|
|
break;
|
|
|
|
case RF_6052:
|
|
PHY_RF6052SetBandwidth(dev, priv->CurrentChannelBW);
|
|
break;
|
|
default:
|
|
printk("Unknown rf_chip: %d\n", priv->rf_chip);
|
|
break;
|
|
}
|
|
|
|
priv->SetBWModeInProgress= FALSE;
|
|
|
|
RT_TRACE(COMP_SWBW, "<==SetBWModeCallback8190Pci() \n" );
|
|
}
|
|
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: SetBWMode8190Pci()
|
|
*
|
|
* Overview: This function is export to "HalCommon" moudule
|
|
*
|
|
* Input: PADAPTER Adapter
|
|
* HT_CHANNEL_WIDTH Bandwidth //20M or 40M
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: NONE
|
|
*
|
|
* Note: We do not take j mode into consideration now
|
|
*---------------------------------------------------------------------------*/
|
|
//extern void PHY_SetBWMode8192S( struct net_device* dev,
|
|
// HT_CHANNEL_WIDTH Bandwidth, // 20M or 40M
|
|
// HT_EXTCHNL_OFFSET Offset // Upper, Lower, or Don't care
|
|
void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
HT_CHANNEL_WIDTH tmpBW = priv->CurrentChannelBW;
|
|
|
|
|
|
// Modified it for 20/40 mhz switch by guangan 070531
|
|
|
|
//return;
|
|
|
|
//if(priv->SwChnlInProgress)
|
|
// if(pMgntInfo->bScanInProgress)
|
|
// {
|
|
// RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWMode8190Pci() %s Exit because bScanInProgress!\n",
|
|
// Bandwidth == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"));
|
|
// return;
|
|
// }
|
|
|
|
// if(priv->SetBWModeInProgress)
|
|
// {
|
|
// // Modified it for 20/40 mhz switch by guangan 070531
|
|
// RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWMode8190Pci() %s cancel last timer because SetBWModeInProgress!\n",
|
|
// Bandwidth == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz"));
|
|
// PlatformCancelTimer(dev, &priv->SetBWModeTimer);
|
|
// //return;
|
|
// }
|
|
|
|
if(priv->SetBWModeInProgress)
|
|
return;
|
|
|
|
priv->SetBWModeInProgress= TRUE;
|
|
|
|
priv->CurrentChannelBW = Bandwidth;
|
|
|
|
if(Offset==HT_EXTCHNL_OFFSET_LOWER)
|
|
priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_UPPER;
|
|
else if(Offset==HT_EXTCHNL_OFFSET_UPPER)
|
|
priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_LOWER;
|
|
else
|
|
priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
|
|
|
|
if((priv->up) )// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower) )
|
|
{
|
|
SetBWModeCallback8192SUsbWorkItem(dev);
|
|
}
|
|
else
|
|
{
|
|
RT_TRACE(COMP_SCAN, "PHY_SetBWMode8192S() SetBWModeInProgress FALSE driver sleep or unload\n");
|
|
priv->SetBWModeInProgress= FALSE;
|
|
priv->CurrentChannelBW = tmpBW;
|
|
}
|
|
}
|
|
|
|
// use in phy only (in win it's timer)
|
|
void PHY_SwChnlCallback8192S(struct net_device *dev)
|
|
{
|
|
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u32 delay;
|
|
//bool ret;
|
|
|
|
RT_TRACE(COMP_CH, "==>SwChnlCallback8190Pci(), switch to channel %d\n", priv->chan);
|
|
|
|
if(!priv->up)
|
|
return;
|
|
|
|
if(priv->rf_chip == RF_PSEUDO_11N)
|
|
{
|
|
priv->SwChnlInProgress=FALSE;
|
|
return; //return immediately if it is peudo-phy
|
|
}
|
|
|
|
do{
|
|
if(!priv->SwChnlInProgress)
|
|
break;
|
|
|
|
//if(!phy_SwChnlStepByStep(dev, priv->CurrentChannel, &priv->SwChnlStage, &priv->SwChnlStep, &delay))
|
|
if(!phy_SwChnlStepByStep(dev, priv->chan, &priv->SwChnlStage, &priv->SwChnlStep, &delay))
|
|
{
|
|
if(delay>0)
|
|
{
|
|
mdelay(delay);
|
|
//PlatformSetTimer(dev, &priv->SwChnlTimer, delay);
|
|
//mod_timer(&priv->SwChnlTimer, jiffies + MSECS(delay));
|
|
//==>PHY_SwChnlCallback8192S(dev); for 92se
|
|
//==>SwChnlCallback8192SUsb(dev) for 92su
|
|
}
|
|
else
|
|
continue;
|
|
}
|
|
else
|
|
{
|
|
priv->SwChnlInProgress=FALSE;
|
|
break;
|
|
}
|
|
}while(true);
|
|
}
|
|
|
|
// Call after initialization
|
|
//extern void PHY_SwChnl8192S(struct net_device* dev, u8 channel)
|
|
u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
//u8 tmpchannel =channel;
|
|
//bool bResult = false;
|
|
|
|
if(!priv->up)
|
|
return false;
|
|
|
|
if(priv->SwChnlInProgress)
|
|
return false;
|
|
|
|
if(priv->SetBWModeInProgress)
|
|
return false;
|
|
|
|
//--------------------------------------------
|
|
switch(priv->ieee80211->mode)
|
|
{
|
|
case WIRELESS_MODE_A:
|
|
case WIRELESS_MODE_N_5G:
|
|
if (channel<=14){
|
|
RT_TRACE(COMP_ERR, "WIRELESS_MODE_A but channel<=14");
|
|
return false;
|
|
}
|
|
break;
|
|
|
|
case WIRELESS_MODE_B:
|
|
if (channel>14){
|
|
RT_TRACE(COMP_ERR, "WIRELESS_MODE_B but channel>14");
|
|
return false;
|
|
}
|
|
break;
|
|
|
|
case WIRELESS_MODE_G:
|
|
case WIRELESS_MODE_N_24G:
|
|
if (channel>14){
|
|
RT_TRACE(COMP_ERR, "WIRELESS_MODE_G but channel>14");
|
|
return false;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
;//RT_TRACE(COMP_ERR, "Invalid WirelessMode(%#x)!!\n", priv->ieee80211->mode);
|
|
break;
|
|
}
|
|
//--------------------------------------------
|
|
|
|
priv->SwChnlInProgress = TRUE;
|
|
if( channel == 0)
|
|
channel = 1;
|
|
|
|
priv->chan=channel;
|
|
|
|
priv->SwChnlStage=0;
|
|
priv->SwChnlStep=0;
|
|
|
|
if((priv->up))// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower))
|
|
{
|
|
SwChnlCallback8192SUsbWorkItem(dev);
|
|
#ifdef TO_DO_LIST
|
|
if(bResult)
|
|
{
|
|
RT_TRACE(COMP_SCAN, "PHY_SwChnl8192S SwChnlInProgress TRUE schdule workitem done\n");
|
|
}
|
|
else
|
|
{
|
|
RT_TRACE(COMP_SCAN, "PHY_SwChnl8192S SwChnlInProgress FALSE schdule workitem error\n");
|
|
priv->SwChnlInProgress = false;
|
|
priv->CurrentChannel = tmpchannel;
|
|
}
|
|
#endif
|
|
}
|
|
else
|
|
{
|
|
RT_TRACE(COMP_SCAN, "PHY_SwChnl8192S SwChnlInProgress FALSE driver sleep or unload\n");
|
|
priv->SwChnlInProgress = false;
|
|
//priv->CurrentChannel = tmpchannel;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
|
|
//
|
|
// Description:
|
|
// Switch channel synchronously. Called by SwChnlByDelayHandler.
|
|
//
|
|
// Implemented by Bruce, 2008-02-14.
|
|
// The following procedure is operted according to SwChanlCallback8190Pci().
|
|
// However, this procedure is performed synchronously which should be running under
|
|
// passive level.
|
|
//
|
|
//not understand it
|
|
void PHY_SwChnlPhy8192S( // Only called during initialize
|
|
struct net_device* dev,
|
|
u8 channel
|
|
)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
RT_TRACE(COMP_SCAN, "==>PHY_SwChnlPhy8192S(), switch to channel %d.\n", priv->chan);
|
|
|
|
#ifdef TO_DO_LIST
|
|
// Cannot IO.
|
|
if(RT_CANNOT_IO(dev))
|
|
return;
|
|
#endif
|
|
|
|
// Channel Switching is in progress.
|
|
if(priv->SwChnlInProgress)
|
|
return;
|
|
|
|
//return immediately if it is peudo-phy
|
|
if(priv->rf_chip == RF_PSEUDO_11N)
|
|
{
|
|
priv->SwChnlInProgress=FALSE;
|
|
return;
|
|
}
|
|
|
|
priv->SwChnlInProgress = TRUE;
|
|
if( channel == 0)
|
|
channel = 1;
|
|
|
|
priv->chan=channel;
|
|
|
|
priv->SwChnlStage = 0;
|
|
priv->SwChnlStep = 0;
|
|
|
|
phy_FinishSwChnlNow(dev,channel);
|
|
|
|
priv->SwChnlInProgress = FALSE;
|
|
}
|
|
|
|
// use in phy only
|
|
static bool
|
|
phy_SetSwChnlCmdArray(
|
|
SwChnlCmd* CmdTable,
|
|
u32 CmdTableIdx,
|
|
u32 CmdTableSz,
|
|
SwChnlCmdID CmdID,
|
|
u32 Para1,
|
|
u32 Para2,
|
|
u32 msDelay
|
|
)
|
|
{
|
|
SwChnlCmd* pCmd;
|
|
|
|
if(CmdTable == NULL)
|
|
{
|
|
//RT_ASSERT(FALSE, ("phy_SetSwChnlCmdArray(): CmdTable cannot be NULL.\n"));
|
|
return FALSE;
|
|
}
|
|
if(CmdTableIdx >= CmdTableSz)
|
|
{
|
|
//RT_ASSERT(FALSE,
|
|
// ("phy_SetSwChnlCmdArray(): Access invalid index, please check size of the table, CmdTableIdx:%d, CmdTableSz:%d\n",
|
|
//CmdTableIdx, CmdTableSz));
|
|
return FALSE;
|
|
}
|
|
|
|
pCmd = CmdTable + CmdTableIdx;
|
|
pCmd->CmdID = CmdID;
|
|
pCmd->Para1 = Para1;
|
|
pCmd->Para2 = Para2;
|
|
pCmd->msDelay = msDelay;
|
|
|
|
return TRUE;
|
|
}
|
|
|
|
// use in phy only
|
|
static bool
|
|
phy_SwChnlStepByStep(
|
|
struct net_device* dev,
|
|
u8 channel,
|
|
u8 *stage,
|
|
u8 *step,
|
|
u32 *delay
|
|
)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
//PCHANNEL_ACCESS_SETTING pChnlAccessSetting;
|
|
SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT];
|
|
u32 PreCommonCmdCnt;
|
|
SwChnlCmd PostCommonCmd[MAX_POSTCMD_CNT];
|
|
u32 PostCommonCmdCnt;
|
|
SwChnlCmd RfDependCmd[MAX_RFDEPENDCMD_CNT];
|
|
u32 RfDependCmdCnt;
|
|
SwChnlCmd *CurrentCmd = NULL;
|
|
u8 eRFPath;
|
|
|
|
//RT_ASSERT((dev != NULL), ("Adapter should not be NULL\n"));
|
|
//RT_ASSERT(IsLegalChannel(dev, channel), ("illegal channel: %d\n", channel));
|
|
RT_TRACE(COMP_CH, "===========>%s(), channel:%d, stage:%d, step:%d\n", __FUNCTION__, channel, *stage, *step);
|
|
//RT_ASSERT((pHalData != NULL), ("pHalData should not be NULL\n"));
|
|
if (!IsLegalChannel(priv->ieee80211, channel))
|
|
{
|
|
RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel);
|
|
return true; //return true to tell upper caller function this channel setting is finished! Or it will in while loop.
|
|
}
|
|
|
|
//pChnlAccessSetting = &Adapter->MgntInfo.Info8185.ChannelAccessSetting;
|
|
//RT_ASSERT((pChnlAccessSetting != NULL), ("pChnlAccessSetting should not be NULL\n"));
|
|
|
|
//for(eRFPath = RF90_PATH_A; eRFPath <priv->NumTotalRFPath; eRFPath++)
|
|
//for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
|
|
//{
|
|
// <1> Fill up pre common command.
|
|
PreCommonCmdCnt = 0;
|
|
phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT,
|
|
CmdID_SetTxPowerLevel, 0, 0, 0);
|
|
phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT,
|
|
CmdID_End, 0, 0, 0);
|
|
|
|
// <2> Fill up post common command.
|
|
PostCommonCmdCnt = 0;
|
|
|
|
phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++, MAX_POSTCMD_CNT,
|
|
CmdID_End, 0, 0, 0);
|
|
|
|
// <3> Fill up RF dependent command.
|
|
RfDependCmdCnt = 0;
|
|
switch( priv->rf_chip )
|
|
{
|
|
case RF_8225:
|
|
if (channel < 1 || channel > 14)
|
|
RT_TRACE(COMP_ERR, "illegal channel for zebra:%d\n", channel);
|
|
//RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel));
|
|
// 2008/09/04 MH Change channel.
|
|
phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
|
|
CmdID_RF_WriteReg, rRfChannel, channel, 10);
|
|
phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
|
|
CmdID_End, 0, 0, 0);
|
|
break;
|
|
|
|
case RF_8256:
|
|
if (channel < 1 || channel > 14)
|
|
RT_TRACE(COMP_ERR, "illegal channel for zebra:%d\n", channel);
|
|
// TEST!! This is not the table for 8256!!
|
|
//RT_ASSERT((channel >= 1 && channel <= 14), ("illegal channel for Zebra: %d\n", channel));
|
|
phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
|
|
CmdID_RF_WriteReg, rRfChannel, channel, 10);
|
|
phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
|
|
CmdID_End, 0, 0, 0);
|
|
break;
|
|
|
|
case RF_6052:
|
|
if (channel < 1 || channel > 14)
|
|
RT_TRACE(COMP_ERR, "illegal channel for zebra:%d\n", channel);
|
|
phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
|
|
CmdID_RF_WriteReg, RF_CHNLBW, channel, 10);
|
|
phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT,
|
|
CmdID_End, 0, 0, 0);
|
|
break;
|
|
|
|
case RF_8258:
|
|
break;
|
|
|
|
default:
|
|
//RT_ASSERT(FALSE, ("Unknown rf_chip: %d\n", priv->rf_chip));
|
|
return FALSE;
|
|
break;
|
|
}
|
|
|
|
|
|
do{
|
|
switch(*stage)
|
|
{
|
|
case 0:
|
|
CurrentCmd=&PreCommonCmd[*step];
|
|
break;
|
|
case 1:
|
|
CurrentCmd=&RfDependCmd[*step];
|
|
break;
|
|
case 2:
|
|
CurrentCmd=&PostCommonCmd[*step];
|
|
break;
|
|
}
|
|
|
|
if(CurrentCmd->CmdID==CmdID_End)
|
|
{
|
|
if((*stage)==2)
|
|
{
|
|
return TRUE;
|
|
}
|
|
else
|
|
{
|
|
(*stage)++;
|
|
(*step)=0;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
switch(CurrentCmd->CmdID)
|
|
{
|
|
case CmdID_SetTxPowerLevel:
|
|
//if(priv->card_8192_version > VERSION_8190_BD)
|
|
PHY_SetTxPowerLevel8192S(dev,channel);
|
|
break;
|
|
case CmdID_WritePortUlong:
|
|
write_nic_dword(dev, CurrentCmd->Para1, CurrentCmd->Para2);
|
|
break;
|
|
case CmdID_WritePortUshort:
|
|
write_nic_word(dev, CurrentCmd->Para1, (u16)CurrentCmd->Para2);
|
|
break;
|
|
case CmdID_WritePortUchar:
|
|
write_nic_byte(dev, CurrentCmd->Para1, (u8)CurrentCmd->Para2);
|
|
break;
|
|
case CmdID_RF_WriteReg: // Only modify channel for the register now !!!!!
|
|
for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++)
|
|
{
|
|
// For new T65 RF 0222d register 0x18 bit 0-9 = channel number.
|
|
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, 0x1f, (CurrentCmd->Para2));
|
|
//printk("====>%x, %x, read_back:%x\n", CurrentCmd->Para2,CurrentCmd->Para1, rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, 0x1f));
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
break;
|
|
}while(TRUE);
|
|
//cosa }/*for(Number of RF paths)*/
|
|
|
|
(*delay)=CurrentCmd->msDelay;
|
|
(*step)++;
|
|
RT_TRACE(COMP_CH, "<===========%s(), channel:%d, stage:%d, step:%d\n", __FUNCTION__, channel, *stage, *step);
|
|
return FALSE;
|
|
}
|
|
|
|
//called PHY_SwChnlPhy8192S, SwChnlCallback8192SUsbWorkItem
|
|
// use in phy only
|
|
static void
|
|
phy_FinishSwChnlNow( // We should not call this function directly
|
|
struct net_device* dev,
|
|
u8 channel
|
|
)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u32 delay;
|
|
|
|
while(!phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay))
|
|
{
|
|
if(delay>0)
|
|
mdelay(delay);
|
|
if(!priv->up)
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: PHYCheckIsLegalRfPath8190Pci()
|
|
*
|
|
* Overview: Check different RF type to execute legal judgement. If RF Path is illegal
|
|
* We will return false.
|
|
*
|
|
* Input: NONE
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: NONE
|
|
*
|
|
* Revised History:
|
|
* When Who Remark
|
|
* 11/15/2007 MHC Create Version 0.
|
|
*
|
|
*---------------------------------------------------------------------------*/
|
|
//called by rtl8192_phy_QueryRFReg, rtl8192_phy_SetRFReg, PHY_SetRFPowerState8192SUsb
|
|
//extern bool
|
|
//PHY_CheckIsLegalRfPath8192S(
|
|
// struct net_device* dev,
|
|
// u32 eRFPath)
|
|
u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath)
|
|
{
|
|
// struct r8192_priv *priv = ieee80211_priv(dev);
|
|
bool rtValue = TRUE;
|
|
|
|
// NOt check RF Path now.!
|
|
return rtValue;
|
|
|
|
} /* PHY_CheckIsLegalRfPath8192S */
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: PHY_IQCalibrate8192S()
|
|
*
|
|
* Overview: After all MAC/PHY/RF is configued. We must execute IQ calibration
|
|
* to improve RF EVM!!?
|
|
*
|
|
* Input: IN PADAPTER pAdapter
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: NONE
|
|
*
|
|
* Revised History:
|
|
* When Who Remark
|
|
* 10/07/2008 MHC Create. Document from SD3 RFSI Jenyu.
|
|
*
|
|
*---------------------------------------------------------------------------*/
|
|
//called by InitializeAdapter8192SE
|
|
void
|
|
PHY_IQCalibrate( struct net_device* dev)
|
|
{
|
|
//struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u32 i, reg;
|
|
u32 old_value;
|
|
long X, Y, TX0[4];
|
|
u32 TXA[4];
|
|
|
|
// 1. Check QFN68 or 64 92S (Read from EEPROM)
|
|
|
|
//
|
|
// 2. QFN 68
|
|
//
|
|
// For 1T2R IQK only now !!!
|
|
for (i = 0; i < 10; i++)
|
|
{
|
|
// IQK
|
|
rtl8192_setBBreg(dev, 0xc04, bMaskDWord, 0x00a05430);
|
|
//PlatformStallExecution(5);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xc08, bMaskDWord, 0x000800e4);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe28, bMaskDWord, 0x80800000);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe40, bMaskDWord, 0x02140148);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe44, bMaskDWord, 0x681604a2);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe4c, bMaskDWord, 0x000028d1);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe60, bMaskDWord, 0x0214014d);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe64, bMaskDWord, 0x281608ba);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe6c, bMaskDWord, 0x000028d1);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xfb000001);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xf8000001);
|
|
udelay(2000);
|
|
rtl8192_setBBreg(dev, 0xc04, bMaskDWord, 0x00a05433);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xc08, bMaskDWord, 0x000000e4);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe28, bMaskDWord, 0x0);
|
|
|
|
|
|
reg = rtl8192_QueryBBReg(dev, 0xeac, bMaskDWord);
|
|
|
|
// Readback IQK value and rewrite
|
|
if (!(reg&(BIT27|BIT28|BIT30|BIT31)))
|
|
{
|
|
old_value = (rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord) & 0x3FF);
|
|
|
|
// Calibrate init gain for A path for TX0
|
|
X = (rtl8192_QueryBBReg(dev, 0xe94, bMaskDWord) & 0x03FF0000)>>16;
|
|
TXA[RF90_PATH_A] = (X * old_value)/0x100;
|
|
reg = rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord);
|
|
reg = (reg & 0xFFFFFC00) | (u32)TXA[RF90_PATH_A];
|
|
rtl8192_setBBreg(dev, 0xc80, bMaskDWord, reg);
|
|
udelay(5);
|
|
|
|
// Calibrate init gain for C path for TX0
|
|
Y = ( rtl8192_QueryBBReg(dev, 0xe9C, bMaskDWord) & 0x03FF0000)>>16;
|
|
TX0[RF90_PATH_C] = ((Y * old_value)/0x100);
|
|
reg = rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord);
|
|
reg = (reg & 0xffc0ffff) |((u32) (TX0[RF90_PATH_C]&0x3F)<<16);
|
|
rtl8192_setBBreg(dev, 0xc80, bMaskDWord, reg);
|
|
reg = rtl8192_QueryBBReg(dev, 0xc94, bMaskDWord);
|
|
reg = (reg & 0x0fffffff) |(((Y&0x3c0)>>6)<<28);
|
|
rtl8192_setBBreg(dev, 0xc94, bMaskDWord, reg);
|
|
udelay(5);
|
|
|
|
// Calibrate RX A and B for RX0
|
|
reg = rtl8192_QueryBBReg(dev, 0xc14, bMaskDWord);
|
|
X = (rtl8192_QueryBBReg(dev, 0xea4, bMaskDWord) & 0x03FF0000)>>16;
|
|
reg = (reg & 0xFFFFFC00) |X;
|
|
rtl8192_setBBreg(dev, 0xc14, bMaskDWord, reg);
|
|
Y = (rtl8192_QueryBBReg(dev, 0xeac, bMaskDWord) & 0x003F0000)>>16;
|
|
reg = (reg & 0xFFFF03FF) |Y<<10;
|
|
rtl8192_setBBreg(dev, 0xc14, bMaskDWord, reg);
|
|
udelay(5);
|
|
old_value = (rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord) & 0x3FF);
|
|
|
|
// Calibrate init gain for A path for TX1 !!!!!!
|
|
X = (rtl8192_QueryBBReg(dev, 0xeb4, bMaskDWord) & 0x03FF0000)>>16;
|
|
reg = rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord);
|
|
TXA[RF90_PATH_A] = (X * old_value) / 0x100;
|
|
reg = (reg & 0xFFFFFC00) | TXA[RF90_PATH_A];
|
|
rtl8192_setBBreg(dev, 0xc88, bMaskDWord, reg);
|
|
udelay(5);
|
|
|
|
// Calibrate init gain for C path for TX1
|
|
Y = (rtl8192_QueryBBReg(dev, 0xebc, bMaskDWord)& 0x03FF0000)>>16;
|
|
TX0[RF90_PATH_C] = ((Y * old_value)/0x100);
|
|
reg = rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord);
|
|
reg = (reg & 0xffc0ffff) |( (TX0[RF90_PATH_C]&0x3F)<<16);
|
|
rtl8192_setBBreg(dev, 0xc88, bMaskDWord, reg);
|
|
reg = rtl8192_QueryBBReg(dev, 0xc9c, bMaskDWord);
|
|
reg = (reg & 0x0fffffff) |(((Y&0x3c0)>>6)<<28);
|
|
rtl8192_setBBreg(dev, 0xc9c, bMaskDWord, reg);
|
|
udelay(5);
|
|
|
|
// Calibrate RX A and B for RX1
|
|
reg = rtl8192_QueryBBReg(dev, 0xc1c, bMaskDWord);
|
|
X = (rtl8192_QueryBBReg(dev, 0xec4, bMaskDWord) & 0x03FF0000)>>16;
|
|
reg = (reg & 0xFFFFFC00) |X;
|
|
rtl8192_setBBreg(dev, 0xc1c, bMaskDWord, reg);
|
|
|
|
Y = (rtl8192_QueryBBReg(dev, 0xecc, bMaskDWord) & 0x003F0000)>>16;
|
|
reg = (reg & 0xFFFF03FF) |Y<<10;
|
|
rtl8192_setBBreg(dev, 0xc1c, bMaskDWord, reg);
|
|
udelay(5);
|
|
|
|
RT_TRACE(COMP_INIT, "PHY_IQCalibrate OK\n");
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
|
|
//
|
|
// 3. QFN64. Not enabled now !!! We must use different gain table for 1T2R.
|
|
//
|
|
|
|
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: PHY_IQCalibrateBcut()
|
|
*
|
|
* Overview: After all MAC/PHY/RF is configued. We must execute IQ calibration
|
|
* to improve RF EVM!!?
|
|
*
|
|
* Input: IN PADAPTER pAdapter
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: NONE
|
|
*
|
|
* Revised History:
|
|
* When Who Remark
|
|
* 11/18/2008 MHC Create. Document from SD3 RFSI Jenyu.
|
|
* 92S B-cut QFN 68 pin IQ calibration procedure.doc
|
|
*
|
|
*---------------------------------------------------------------------------*/
|
|
extern void PHY_IQCalibrateBcut(struct net_device* dev)
|
|
{
|
|
//struct r8192_priv *priv = ieee80211_priv(dev);
|
|
//PMGNT_INFO pMgntInfo = &pAdapter->MgntInfo;
|
|
u32 i, reg;
|
|
u32 old_value;
|
|
long X, Y, TX0[4];
|
|
u32 TXA[4];
|
|
u32 calibrate_set[13] = {0};
|
|
u32 load_value[13];
|
|
u8 RfPiEnable=0;
|
|
|
|
// 0. Check QFN68 or 64 92S (Read from EEPROM/EFUSE)
|
|
|
|
//
|
|
// 1. Save e70~ee0 register setting, and load calibration setting
|
|
//
|
|
/*
|
|
0xee0[31:0]=0x3fed92fb;
|
|
0xedc[31:0] =0x3fed92fb;
|
|
0xe70[31:0] =0x3fed92fb;
|
|
0xe74[31:0] =0x3fed92fb;
|
|
0xe78[31:0] =0x3fed92fb;
|
|
0xe7c[31:0]= 0x3fed92fb;
|
|
0xe80[31:0]= 0x3fed92fb;
|
|
0xe84[31:0]= 0x3fed92fb;
|
|
0xe88[31:0]= 0x3fed92fb;
|
|
0xe8c[31:0]= 0x3fed92fb;
|
|
0xed0[31:0]= 0x3fed92fb;
|
|
0xed4[31:0]= 0x3fed92fb;
|
|
0xed8[31:0]= 0x3fed92fb;
|
|
*/
|
|
calibrate_set [0] = 0xee0;
|
|
calibrate_set [1] = 0xedc;
|
|
calibrate_set [2] = 0xe70;
|
|
calibrate_set [3] = 0xe74;
|
|
calibrate_set [4] = 0xe78;
|
|
calibrate_set [5] = 0xe7c;
|
|
calibrate_set [6] = 0xe80;
|
|
calibrate_set [7] = 0xe84;
|
|
calibrate_set [8] = 0xe88;
|
|
calibrate_set [9] = 0xe8c;
|
|
calibrate_set [10] = 0xed0;
|
|
calibrate_set [11] = 0xed4;
|
|
calibrate_set [12] = 0xed8;
|
|
//RT_TRACE(COMP_INIT, DBG_LOUD, ("Save e70~ee0 register setting\n"));
|
|
for (i = 0; i < 13; i++)
|
|
{
|
|
load_value[i] = rtl8192_QueryBBReg(dev, calibrate_set[i], bMaskDWord);
|
|
rtl8192_setBBreg(dev, calibrate_set[i], bMaskDWord, 0x3fed92fb);
|
|
|
|
}
|
|
|
|
RfPiEnable = (u8)rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter1, BIT8);
|
|
|
|
//
|
|
// 2. QFN 68
|
|
//
|
|
// For 1T2R IQK only now !!!
|
|
for (i = 0; i < 10; i++)
|
|
{
|
|
RT_TRACE(COMP_INIT, "IQK -%d\n", i);
|
|
//BB switch to PI mode. If default is PI mode, ignoring 2 commands below.
|
|
if (!RfPiEnable) //if original is SI mode, then switch to PI mode.
|
|
{
|
|
//DbgPrint("IQK Switch to PI mode\n");
|
|
rtl8192_setBBreg(dev, 0x820, bMaskDWord, 0x01000100);
|
|
rtl8192_setBBreg(dev, 0x828, bMaskDWord, 0x01000100);
|
|
}
|
|
|
|
// IQK
|
|
// 2. IQ calibration & LO leakage calibration
|
|
rtl8192_setBBreg(dev, 0xc04, bMaskDWord, 0x00a05430);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xc08, bMaskDWord, 0x000800e4);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe28, bMaskDWord, 0x80800000);
|
|
udelay(5);
|
|
//path-A IQ K and LO K gain setting
|
|
rtl8192_setBBreg(dev, 0xe40, bMaskDWord, 0x02140102);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe44, bMaskDWord, 0x681604c2);
|
|
udelay(5);
|
|
//set LO calibration
|
|
rtl8192_setBBreg(dev, 0xe4c, bMaskDWord, 0x000028d1);
|
|
udelay(5);
|
|
//path-B IQ K and LO K gain setting
|
|
rtl8192_setBBreg(dev, 0xe60, bMaskDWord, 0x02140102);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe64, bMaskDWord, 0x28160d05);
|
|
udelay(5);
|
|
//K idac_I & IQ
|
|
rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xfb000000);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xf8000000);
|
|
udelay(5);
|
|
|
|
// delay 2ms
|
|
udelay(2000);
|
|
|
|
//idac_Q setting
|
|
rtl8192_setBBreg(dev, 0xe6c, bMaskDWord, 0x020028d1);
|
|
udelay(5);
|
|
//K idac_Q & IQ
|
|
rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xfb000000);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe48, bMaskDWord, 0xf8000000);
|
|
|
|
// delay 2ms
|
|
udelay(2000);
|
|
|
|
rtl8192_setBBreg(dev, 0xc04, bMaskDWord, 0x00a05433);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xc08, bMaskDWord, 0x000000e4);
|
|
udelay(5);
|
|
rtl8192_setBBreg(dev, 0xe28, bMaskDWord, 0x0);
|
|
|
|
if (!RfPiEnable) //if original is SI mode, then switch to PI mode.
|
|
{
|
|
//DbgPrint("IQK Switch back to SI mode\n");
|
|
rtl8192_setBBreg(dev, 0x820, bMaskDWord, 0x01000000);
|
|
rtl8192_setBBreg(dev, 0x828, bMaskDWord, 0x01000000);
|
|
}
|
|
|
|
|
|
reg = rtl8192_QueryBBReg(dev, 0xeac, bMaskDWord);
|
|
|
|
// 3. check fail bit, and fill BB IQ matrix
|
|
// Readback IQK value and rewrite
|
|
if (!(reg&(BIT27|BIT28|BIT30|BIT31)))
|
|
{
|
|
old_value = (rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord) & 0x3FF);
|
|
|
|
// Calibrate init gain for A path for TX0
|
|
X = (rtl8192_QueryBBReg(dev, 0xe94, bMaskDWord) & 0x03FF0000)>>16;
|
|
TXA[RF90_PATH_A] = (X * old_value)/0x100;
|
|
reg = rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord);
|
|
reg = (reg & 0xFFFFFC00) | (u32)TXA[RF90_PATH_A];
|
|
rtl8192_setBBreg(dev, 0xc80, bMaskDWord, reg);
|
|
udelay(5);
|
|
|
|
// Calibrate init gain for C path for TX0
|
|
Y = ( rtl8192_QueryBBReg(dev, 0xe9C, bMaskDWord) & 0x03FF0000)>>16;
|
|
TX0[RF90_PATH_C] = ((Y * old_value)/0x100);
|
|
reg = rtl8192_QueryBBReg(dev, 0xc80, bMaskDWord);
|
|
reg = (reg & 0xffc0ffff) |((u32) (TX0[RF90_PATH_C]&0x3F)<<16);
|
|
rtl8192_setBBreg(dev, 0xc80, bMaskDWord, reg);
|
|
reg = rtl8192_QueryBBReg(dev, 0xc94, bMaskDWord);
|
|
reg = (reg & 0x0fffffff) |(((Y&0x3c0)>>6)<<28);
|
|
rtl8192_setBBreg(dev, 0xc94, bMaskDWord, reg);
|
|
udelay(5);
|
|
|
|
// Calibrate RX A and B for RX0
|
|
reg = rtl8192_QueryBBReg(dev, 0xc14, bMaskDWord);
|
|
X = (rtl8192_QueryBBReg(dev, 0xea4, bMaskDWord) & 0x03FF0000)>>16;
|
|
reg = (reg & 0xFFFFFC00) |X;
|
|
rtl8192_setBBreg(dev, 0xc14, bMaskDWord, reg);
|
|
Y = (rtl8192_QueryBBReg(dev, 0xeac, bMaskDWord) & 0x003F0000)>>16;
|
|
reg = (reg & 0xFFFF03FF) |Y<<10;
|
|
rtl8192_setBBreg(dev, 0xc14, bMaskDWord, reg);
|
|
udelay(5);
|
|
old_value = (rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord) & 0x3FF);
|
|
|
|
// Calibrate init gain for A path for TX1 !!!!!!
|
|
X = (rtl8192_QueryBBReg(dev, 0xeb4, bMaskDWord) & 0x03FF0000)>>16;
|
|
reg = rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord);
|
|
TXA[RF90_PATH_A] = (X * old_value) / 0x100;
|
|
reg = (reg & 0xFFFFFC00) | TXA[RF90_PATH_A];
|
|
rtl8192_setBBreg(dev, 0xc88, bMaskDWord, reg);
|
|
udelay(5);
|
|
|
|
// Calibrate init gain for C path for TX1
|
|
Y = (rtl8192_QueryBBReg(dev, 0xebc, bMaskDWord)& 0x03FF0000)>>16;
|
|
TX0[RF90_PATH_C] = ((Y * old_value)/0x100);
|
|
reg = rtl8192_QueryBBReg(dev, 0xc88, bMaskDWord);
|
|
reg = (reg & 0xffc0ffff) |( (TX0[RF90_PATH_C]&0x3F)<<16);
|
|
rtl8192_setBBreg(dev, 0xc88, bMaskDWord, reg);
|
|
reg = rtl8192_QueryBBReg(dev, 0xc9c, bMaskDWord);
|
|
reg = (reg & 0x0fffffff) |(((Y&0x3c0)>>6)<<28);
|
|
rtl8192_setBBreg(dev, 0xc9c, bMaskDWord, reg);
|
|
udelay(5);
|
|
|
|
// Calibrate RX A and B for RX1
|
|
reg = rtl8192_QueryBBReg(dev, 0xc1c, bMaskDWord);
|
|
X = (rtl8192_QueryBBReg(dev, 0xec4, bMaskDWord) & 0x03FF0000)>>16;
|
|
reg = (reg & 0xFFFFFC00) |X;
|
|
rtl8192_setBBreg(dev, 0xc1c, bMaskDWord, reg);
|
|
|
|
Y = (rtl8192_QueryBBReg(dev, 0xecc, bMaskDWord) & 0x003F0000)>>16;
|
|
reg = (reg & 0xFFFF03FF) |Y<<10;
|
|
rtl8192_setBBreg(dev, 0xc1c, bMaskDWord, reg);
|
|
udelay(5);
|
|
|
|
RT_TRACE(COMP_INIT, "PHY_IQCalibrate OK\n");
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
//
|
|
// 4. Reload e70~ee0 register setting.
|
|
//
|
|
//RT_TRACE(COMP_INIT, DBG_LOUD, ("Reload e70~ee0 register setting.\n"));
|
|
for (i = 0; i < 13; i++)
|
|
rtl8192_setBBreg(dev, calibrate_set[i], bMaskDWord, load_value[i]);
|
|
|
|
|
|
//
|
|
// 3. QFN64. Not enabled now !!! We must use different gain table for 1T2R.
|
|
//
|
|
|
|
|
|
|
|
} // PHY_IQCalibrateBcut
|
|
|
|
|
|
//
|
|
// Move from phycfg.c to gen.c to be code independent later
|
|
//
|
|
//-------------------------Move to other DIR later----------------------------*/
|
|
//#if (DEV_BUS_TYPE == USB_INTERFACE)
|
|
|
|
// use in phy only (in win it's timer)
|
|
void SwChnlCallback8192SUsb(struct net_device *dev)
|
|
{
|
|
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u32 delay;
|
|
// bool ret;
|
|
|
|
RT_TRACE(COMP_SCAN, "==>SwChnlCallback8190Pci(), switch to channel %d\n",
|
|
priv->chan);
|
|
|
|
|
|
if(!priv->up)
|
|
return;
|
|
|
|
if(priv->rf_chip == RF_PSEUDO_11N)
|
|
{
|
|
priv->SwChnlInProgress=FALSE;
|
|
return; //return immediately if it is peudo-phy
|
|
}
|
|
|
|
do{
|
|
if(!priv->SwChnlInProgress)
|
|
break;
|
|
|
|
if(!phy_SwChnlStepByStep(dev, priv->chan, &priv->SwChnlStage, &priv->SwChnlStep, &delay))
|
|
{
|
|
if(delay>0)
|
|
{
|
|
//PlatformSetTimer(dev, &priv->SwChnlTimer, delay);
|
|
|
|
}
|
|
else
|
|
continue;
|
|
}
|
|
else
|
|
{
|
|
priv->SwChnlInProgress=FALSE;
|
|
}
|
|
break;
|
|
}while(TRUE);
|
|
}
|
|
|
|
|
|
//
|
|
// Callback routine of the work item for switch channel.
|
|
//
|
|
// use in phy only (in win it's work)
|
|
void SwChnlCallback8192SUsbWorkItem(struct net_device *dev )
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
RT_TRACE(COMP_TRACE, "==> SwChnlCallback8192SUsbWorkItem()\n");
|
|
#ifdef TO_DO_LIST
|
|
if(pAdapter->bInSetPower && RT_USB_CANNOT_IO(pAdapter))
|
|
{
|
|
RT_TRACE(COMP_SCAN, DBG_LOUD, ("<== SwChnlCallback8192SUsbWorkItem() SwChnlInProgress FALSE driver sleep or unload\n"));
|
|
|
|
pHalData->SwChnlInProgress = FALSE;
|
|
return;
|
|
}
|
|
#endif
|
|
phy_FinishSwChnlNow(dev, priv->chan);
|
|
priv->SwChnlInProgress = FALSE;
|
|
|
|
RT_TRACE(COMP_TRACE, "<== SwChnlCallback8192SUsbWorkItem()\n");
|
|
}
|
|
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
* Function: SetBWModeCallback8192SUsb()
|
|
*
|
|
* Overview: Timer callback function for SetSetBWMode
|
|
*
|
|
* Input: PRT_TIMER pTimer
|
|
*
|
|
* Output: NONE
|
|
*
|
|
* Return: NONE
|
|
*
|
|
* Note: (1) We do not take j mode into consideration now
|
|
* (2) Will two workitem of "switch channel" and "switch channel bandwidth" run
|
|
* concurrently?
|
|
*---------------------------------------------------------------------------*/
|
|
//====>//rtl8192_SetBWMode
|
|
// use in phy only (in win it's timer)
|
|
void SetBWModeCallback8192SUsb(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 regBwOpMode;
|
|
|
|
// Added it for 20/40 mhz switch time evaluation by guangan 070531
|
|
//u32 NowL, NowH;
|
|
//u8Byte BeginTime, EndTime;
|
|
u8 regRRSR_RSC;
|
|
|
|
RT_TRACE(COMP_SCAN, "==>SetBWModeCallback8190Pci() Switch to %s bandwidth\n", \
|
|
priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz");
|
|
|
|
if(priv->rf_chip == RF_PSEUDO_11N)
|
|
{
|
|
priv->SetBWModeInProgress= FALSE;
|
|
return;
|
|
}
|
|
|
|
if(!priv->up)
|
|
return;
|
|
|
|
// Added it for 20/40 mhz switch time evaluation by guangan 070531
|
|
//NowL = read_nic_dword(dev, TSFR);
|
|
//NowH = read_nic_dword(dev, TSFR+4);
|
|
//BeginTime = ((u8Byte)NowH << 32) + NowL;
|
|
|
|
//3<1>Set MAC register
|
|
regBwOpMode = read_nic_byte(dev, BW_OPMODE);
|
|
regRRSR_RSC = read_nic_byte(dev, RRSR+2);
|
|
|
|
switch(priv->CurrentChannelBW)
|
|
{
|
|
case HT_CHANNEL_WIDTH_20:
|
|
regBwOpMode |= BW_OPMODE_20MHZ;
|
|
// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
|
|
write_nic_byte(dev, BW_OPMODE, regBwOpMode);
|
|
break;
|
|
|
|
case HT_CHANNEL_WIDTH_20_40:
|
|
regBwOpMode &= ~BW_OPMODE_20MHZ;
|
|
// 2007/02/07 Mark by Emily becasue we have not verify whether this register works
|
|
write_nic_byte(dev, BW_OPMODE, regBwOpMode);
|
|
|
|
regRRSR_RSC = (regRRSR_RSC&0x90) |(priv->nCur40MhzPrimeSC<<5);
|
|
write_nic_byte(dev, RRSR+2, regRRSR_RSC);
|
|
break;
|
|
|
|
default:
|
|
RT_TRACE(COMP_DBG, "SetChannelBandwidth8190Pci(): unknown Bandwidth: %#X\n",
|
|
priv->CurrentChannelBW);
|
|
break;
|
|
}
|
|
|
|
//3 <2>Set PHY related register
|
|
switch(priv->CurrentChannelBW)
|
|
{
|
|
case HT_CHANNEL_WIDTH_20:
|
|
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0);
|
|
rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0);
|
|
|
|
if (priv->card_8192_version >= VERSION_8192S_BCUT)
|
|
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x58);
|
|
|
|
break;
|
|
case HT_CHANNEL_WIDTH_20_40:
|
|
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1);
|
|
rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1);
|
|
rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
|
|
rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
|
|
|
|
// Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207
|
|
//PHY_SetBBReg(Adapter, rCCK0_TxFilter1, bMaskDWord, 0x35360000);
|
|
//PHY_SetBBReg(Adapter, rCCK0_TxFilter2, bMaskDWord, 0x121c252e);
|
|
//PHY_SetBBReg(Adapter, rCCK0_DebugPort, bMaskDWord, 0x00000409);
|
|
//PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter1, bADClkPhase, 0);
|
|
|
|
if (priv->card_8192_version >= VERSION_8192S_BCUT)
|
|
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x18);
|
|
|
|
break;
|
|
default:
|
|
RT_TRACE(COMP_DBG, "SetChannelBandwidth8190Pci(): unknown Bandwidth: %#X\n"\
|
|
,priv->CurrentChannelBW);
|
|
break;
|
|
|
|
}
|
|
//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
|
|
|
|
// Added it for 20/40 mhz switch time evaluation by guangan 070531
|
|
//NowL = read_nic_dword(dev, TSFR);
|
|
//NowH = read_nic_dword(dev, TSFR+4);
|
|
//EndTime = ((u8Byte)NowH << 32) + NowL;
|
|
//RT_TRACE(COMP_SCAN, DBG_LOUD, ("SetBWModeCallback8190Pci: time of SetBWMode = %I64d us!\n", (EndTime - BeginTime)));
|
|
|
|
#if 1
|
|
//3<3>Set RF related register
|
|
switch( priv->rf_chip )
|
|
{
|
|
case RF_8225:
|
|
PHY_SetRF8225Bandwidth(dev, priv->CurrentChannelBW);
|
|
break;
|
|
|
|
case RF_8256:
|
|
// Please implement this function in Hal8190PciPhy8256.c
|
|
//PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW);
|
|
break;
|
|
|
|
case RF_6052:
|
|
PHY_RF6052SetBandwidth(dev, priv->CurrentChannelBW);
|
|
break;
|
|
|
|
case RF_8258:
|
|
// Please implement this function in Hal8190PciPhy8258.c
|
|
// PHY_SetRF8258Bandwidth();
|
|
break;
|
|
|
|
case RF_PSEUDO_11N:
|
|
// Do Nothing
|
|
break;
|
|
|
|
default:
|
|
//RT_ASSERT(FALSE, ("Unknown rf_chip: %d\n", priv->rf_chip));
|
|
break;
|
|
}
|
|
#endif
|
|
priv->SetBWModeInProgress= FALSE;
|
|
|
|
RT_TRACE(COMP_SCAN, "<==SetBWMode8190Pci()" );
|
|
}
|
|
|
|
/*
|
|
* Callback routine of the work item for set bandwidth mode.
|
|
*
|
|
* use in phy only (in win it's work)
|
|
*/
|
|
void SetBWModeCallback8192SUsbWorkItem(struct net_device *dev)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u8 regBwOpMode;
|
|
u8 regRRSR_RSC;
|
|
|
|
RT_TRACE(COMP_SCAN, "%s(): Switch to %s bandwidth", __func__,
|
|
priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 ? "20MHz" : "40MHz");
|
|
|
|
if (priv->rf_chip == RF_PSEUDO_11N) {
|
|
priv->SetBWModeInProgress= FALSE;
|
|
return;
|
|
}
|
|
if(!priv->up)
|
|
return;
|
|
/* Set MAC register */
|
|
regBwOpMode = read_nic_byte(dev, BW_OPMODE);
|
|
regRRSR_RSC = read_nic_byte(dev, RRSR+2);
|
|
switch (priv->CurrentChannelBW) {
|
|
case HT_CHANNEL_WIDTH_20:
|
|
regBwOpMode |= BW_OPMODE_20MHZ;
|
|
/* we have not verified whether this register works */
|
|
write_nic_byte(dev, BW_OPMODE, regBwOpMode);
|
|
break;
|
|
case HT_CHANNEL_WIDTH_20_40:
|
|
regBwOpMode &= ~BW_OPMODE_20MHZ;
|
|
/* we have not verified whether this register works */
|
|
write_nic_byte(dev, BW_OPMODE, regBwOpMode);
|
|
regRRSR_RSC = (regRRSR_RSC&0x90) | (priv->nCur40MhzPrimeSC<<5);
|
|
write_nic_byte(dev, RRSR+2, regRRSR_RSC);
|
|
break;
|
|
default:
|
|
RT_TRACE(COMP_DBG, "%s(): unknown Bandwidth: %#X", __func__,
|
|
priv->CurrentChannelBW);
|
|
break;
|
|
}
|
|
/* Set PHY related register */
|
|
switch (priv->CurrentChannelBW) {
|
|
case HT_CHANNEL_WIDTH_20:
|
|
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0);
|
|
rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0);
|
|
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x58);
|
|
break;
|
|
case HT_CHANNEL_WIDTH_20_40:
|
|
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1);
|
|
rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1);
|
|
/*
|
|
* Set Control channel to upper or lower.
|
|
* These settings are required only for 40MHz
|
|
*/
|
|
rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand,
|
|
(priv->nCur40MhzPrimeSC>>1));
|
|
rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00,
|
|
priv->nCur40MhzPrimeSC);
|
|
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x18);
|
|
break;
|
|
default:
|
|
RT_TRACE(COMP_DBG, "%s(): unknown Bandwidth: %#X", __func__,
|
|
priv->CurrentChannelBW);
|
|
break;
|
|
|
|
}
|
|
/*
|
|
* Skip over setting of J-mode in BB register here.
|
|
* Default value is "None J mode".
|
|
*/
|
|
|
|
/* Set RF related register */
|
|
switch (priv->rf_chip) {
|
|
case RF_8225:
|
|
PHY_SetRF8225Bandwidth(dev, priv->CurrentChannelBW);
|
|
break;
|
|
case RF_8256:
|
|
/* Please implement this function in Hal8190PciPhy8256.c */
|
|
/* PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW); */
|
|
break;
|
|
case RF_6052:
|
|
PHY_RF6052SetBandwidth(dev, priv->CurrentChannelBW);
|
|
break;
|
|
case RF_8258:
|
|
/* Please implement this function in Hal8190PciPhy8258.c */
|
|
/* PHY_SetRF8258Bandwidth(); */
|
|
break;
|
|
case RF_PSEUDO_11N:
|
|
/* Do Nothing */
|
|
break;
|
|
default:
|
|
RT_TRACE(COMP_DBG, "%s(): unknown rf_chip: %d", __func__,
|
|
priv->rf_chip);
|
|
break;
|
|
}
|
|
priv->SetBWModeInProgress= FALSE;
|
|
}
|
|
|
|
//--------------------------Move to oter DIR later-------------------------------*/
|
|
void InitialGain8192S(struct net_device *dev, u8 Operation)
|
|
{
|
|
#ifdef TO_DO_LIST
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
#endif
|
|
|
|
}
|
|
|
|
void InitialGain819xUsb(struct net_device *dev, u8 Operation)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
|
|
priv->InitialGainOperateType = Operation;
|
|
|
|
if(priv->up)
|
|
{
|
|
queue_delayed_work(priv->priv_wq,&priv->initialgain_operate_wq,0);
|
|
}
|
|
}
|
|
|
|
extern void InitialGainOperateWorkItemCallBack(struct work_struct *work)
|
|
{
|
|
struct delayed_work *dwork = container_of(work,struct delayed_work,work);
|
|
struct r8192_priv *priv = container_of(dwork,struct r8192_priv,initialgain_operate_wq);
|
|
struct net_device *dev = priv->ieee80211->dev;
|
|
#define SCAN_RX_INITIAL_GAIN 0x17
|
|
#define POWER_DETECTION_TH 0x08
|
|
u32 BitMask;
|
|
u8 initial_gain;
|
|
u8 Operation;
|
|
|
|
Operation = priv->InitialGainOperateType;
|
|
|
|
switch(Operation)
|
|
{
|
|
case IG_Backup:
|
|
RT_TRACE(COMP_SCAN, "IG_Backup, backup the initial gain.\n");
|
|
initial_gain = SCAN_RX_INITIAL_GAIN;//priv->DefaultInitialGain[0];//
|
|
BitMask = bMaskByte0;
|
|
if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
|
|
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF
|
|
priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, BitMask);
|
|
priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, BitMask);
|
|
priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, BitMask);
|
|
priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, BitMask);
|
|
BitMask = bMaskByte2;
|
|
priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, BitMask);
|
|
|
|
RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
|
|
RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
|
|
RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
|
|
RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
|
|
RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xa0a is %x\n",priv->initgain_backup.cca);
|
|
|
|
RT_TRACE(COMP_SCAN, "Write scan initial gain = 0x%x \n", initial_gain);
|
|
write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain);
|
|
write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain);
|
|
write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain);
|
|
write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain);
|
|
RT_TRACE(COMP_SCAN, "Write scan 0xa0a = 0x%x \n", POWER_DETECTION_TH);
|
|
write_nic_byte(dev, 0xa0a, POWER_DETECTION_TH);
|
|
break;
|
|
case IG_Restore:
|
|
RT_TRACE(COMP_SCAN, "IG_Restore, restore the initial gain.\n");
|
|
BitMask = 0x7f; //Bit0~ Bit6
|
|
if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
|
|
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF
|
|
|
|
rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, BitMask, (u32)priv->initgain_backup.xaagccore1);
|
|
rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, BitMask, (u32)priv->initgain_backup.xbagccore1);
|
|
rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, BitMask, (u32)priv->initgain_backup.xcagccore1);
|
|
rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, BitMask, (u32)priv->initgain_backup.xdagccore1);
|
|
BitMask = bMaskByte2;
|
|
rtl8192_setBBreg(dev, rCCK0_CCA, BitMask, (u32)priv->initgain_backup.cca);
|
|
|
|
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc50 is %x\n",priv->initgain_backup.xaagccore1);
|
|
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc58 is %x\n",priv->initgain_backup.xbagccore1);
|
|
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc60 is %x\n",priv->initgain_backup.xcagccore1);
|
|
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1);
|
|
RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca);
|
|
|
|
PHY_SetTxPowerLevel8192S(dev,priv->ieee80211->current_network.channel);
|
|
|
|
if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM)
|
|
rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // FW DIG ON
|
|
break;
|
|
default:
|
|
RT_TRACE(COMP_SCAN, "Unknown IG Operation. \n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Description:
|
|
// Schedule workitem to send specific CMD IO to FW.
|
|
// Added by Roger, 2008.12.03.
|
|
//
|
|
//-----------------------------------------------------------------------------
|
|
bool HalSetFwCmd8192S(struct net_device* dev, FW_CMD_IO_TYPE FwCmdIO)
|
|
{
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
u16 FwCmdWaitCounter = 0;
|
|
|
|
u16 FwCmdWaitLimit = 1000;
|
|
|
|
//if(IS_HARDWARE_TYPE_8192SU(Adapter) && Adapter->bInHctTest)
|
|
if(priv->bInHctTest)
|
|
return true;
|
|
|
|
RT_TRACE(COMP_CMD, "-->HalSetFwCmd8192S(): Set FW Cmd(%x), SetFwCmdInProgress(%d)\n", (u32)FwCmdIO, priv->SetFwCmdInProgress);
|
|
|
|
// Will be done by high power respectively.
|
|
if(FwCmdIO==FW_CMD_DIG_HALT || FwCmdIO==FW_CMD_DIG_RESUME)
|
|
{
|
|
RT_TRACE(COMP_CMD, "<--HalSetFwCmd8192S(): Set FW Cmd(%x)\n", (u32)FwCmdIO);
|
|
return false;
|
|
}
|
|
|
|
#if 1
|
|
while(priv->SetFwCmdInProgress && FwCmdWaitCounter<FwCmdWaitLimit)
|
|
{
|
|
//if(RT_USB_CANNOT_IO(Adapter))
|
|
//{
|
|
// RT_TRACE(COMP_CMD, DBG_WARNING, ("HalSetFwCmd8192S(): USB can NOT IO!!\n"));
|
|
// return FALSE;
|
|
//}
|
|
|
|
RT_TRACE(COMP_CMD, "HalSetFwCmd8192S(): previous workitem not finish!!\n");
|
|
return false;
|
|
FwCmdWaitCounter ++;
|
|
RT_TRACE(COMP_CMD, "HalSetFwCmd8192S(): Wait 10 ms (%d times)...\n", FwCmdWaitCounter);
|
|
udelay(100);
|
|
}
|
|
|
|
if(FwCmdWaitCounter == FwCmdWaitLimit)
|
|
{
|
|
//RT_ASSERT(FALSE, ("SetFwCmdIOWorkItemCallback(): Wait too logn to set FW CMD\n"));
|
|
RT_TRACE(COMP_CMD, "HalSetFwCmd8192S(): Wait too logn to set FW CMD\n");
|
|
//return false;
|
|
}
|
|
#endif
|
|
if (priv->SetFwCmdInProgress)
|
|
{
|
|
RT_TRACE(COMP_ERR, "<--HalSetFwCmd8192S(): Set FW Cmd(%#x)\n", FwCmdIO);
|
|
return false;
|
|
}
|
|
priv->SetFwCmdInProgress = TRUE;
|
|
priv->CurrentFwCmdIO = FwCmdIO; // Update current FW Cmd for callback use.
|
|
|
|
phy_SetFwCmdIOCallback(dev);
|
|
return true;
|
|
}
|
|
void ChkFwCmdIoDone(struct net_device* dev)
|
|
{
|
|
u16 PollingCnt = 1000;
|
|
u32 tmpValue;
|
|
|
|
do
|
|
{// Make sure that CMD IO has be accepted by FW.
|
|
#ifdef TO_DO_LIST
|
|
if(RT_USB_CANNOT_IO(Adapter))
|
|
{
|
|
RT_TRACE(COMP_CMD, "ChkFwCmdIoDone(): USB can NOT IO!!\n");
|
|
return;
|
|
}
|
|
#endif
|
|
udelay(10); // sleep 20us
|
|
tmpValue = read_nic_dword(dev, WFM5);
|
|
if(tmpValue == 0)
|
|
{
|
|
RT_TRACE(COMP_CMD, "[FW CMD] Set FW Cmd success!!\n");
|
|
break;
|
|
}
|
|
else
|
|
{
|
|
RT_TRACE(COMP_CMD, "[FW CMD] Polling FW Cmd PollingCnt(%d)!!\n", PollingCnt);
|
|
}
|
|
}while( --PollingCnt );
|
|
|
|
if(PollingCnt == 0)
|
|
{
|
|
RT_TRACE(COMP_ERR, "[FW CMD] Set FW Cmd fail!!\n");
|
|
}
|
|
}
|
|
// Callback routine of the timer callback for FW Cmd IO.
|
|
//
|
|
// Description:
|
|
// This routine will send specific CMD IO to FW and check whether it is done.
|
|
//
|
|
void phy_SetFwCmdIOCallback(struct net_device* dev)
|
|
{
|
|
//struct net_device* dev = (struct net_device*) data;
|
|
u32 input;
|
|
static u32 ScanRegister;
|
|
struct r8192_priv *priv = ieee80211_priv(dev);
|
|
if(!priv->up)
|
|
{
|
|
RT_TRACE(COMP_CMD, "SetFwCmdIOTimerCallback(): driver is going to unload\n");
|
|
return;
|
|
}
|
|
|
|
RT_TRACE(COMP_CMD, "--->SetFwCmdIOTimerCallback(): Cmd(%#x), SetFwCmdInProgress(%d)\n", priv->CurrentFwCmdIO, priv->SetFwCmdInProgress);
|
|
|
|
switch(priv->CurrentFwCmdIO)
|
|
{
|
|
case FW_CMD_HIGH_PWR_ENABLE:
|
|
if((priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_HIGH_POWER)==0)
|
|
write_nic_dword(dev, WFM5, FW_HIGH_PWR_ENABLE);
|
|
break;
|
|
|
|
case FW_CMD_HIGH_PWR_DISABLE:
|
|
write_nic_dword(dev, WFM5, FW_HIGH_PWR_DISABLE);
|
|
break;
|
|
|
|
case FW_CMD_DIG_RESUME:
|
|
write_nic_dword(dev, WFM5, FW_DIG_RESUME);
|
|
break;
|
|
|
|
case FW_CMD_DIG_HALT:
|
|
write_nic_dword(dev, WFM5, FW_DIG_HALT);
|
|
break;
|
|
|
|
//
|
|
// <Roger_Notes> The following FW CMD IO was combined into single operation
|
|
// (i.e., to prevent number of system workitem out of resource!!).
|
|
// 2008.12.04.
|
|
//
|
|
case FW_CMD_RESUME_DM_BY_SCAN:
|
|
RT_TRACE(COMP_CMD, "[FW CMD] Set HIGHPWR enable and DIG resume!!\n");
|
|
if((priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_HIGH_POWER)==0)
|
|
{
|
|
write_nic_dword(dev, WFM5, FW_HIGH_PWR_ENABLE); //break;
|
|
ChkFwCmdIoDone(dev);
|
|
}
|
|
write_nic_dword(dev, WFM5, FW_DIG_RESUME);
|
|
break;
|
|
|
|
case FW_CMD_PAUSE_DM_BY_SCAN:
|
|
RT_TRACE(COMP_CMD, "[FW CMD] Set HIGHPWR disable and DIG halt!!\n");
|
|
write_nic_dword(dev, WFM5, FW_HIGH_PWR_DISABLE); //break;
|
|
ChkFwCmdIoDone(dev);
|
|
write_nic_dword(dev, WFM5, FW_DIG_HALT);
|
|
break;
|
|
|
|
//
|
|
// <Roger_Notes> The following FW CMD IO should be checked
|
|
// (i.e., workitem schedule timing issue!!).
|
|
// 2008.12.04.
|
|
//
|
|
case FW_CMD_DIG_DISABLE:
|
|
RT_TRACE(COMP_CMD, "[FW CMD] Set DIG disable!!\n");
|
|
write_nic_dword(dev, WFM5, FW_DIG_DISABLE);
|
|
break;
|
|
|
|
case FW_CMD_DIG_ENABLE:
|
|
RT_TRACE(COMP_CMD, "[FW CMD] Set DIG enable!!\n");
|
|
write_nic_dword(dev, WFM5, FW_DIG_ENABLE);
|
|
break;
|
|
|
|
case FW_CMD_RA_RESET:
|
|
write_nic_dword(dev, WFM5, FW_RA_RESET);
|
|
break;
|
|
|
|
case FW_CMD_RA_ACTIVE:
|
|
write_nic_dword(dev, WFM5, FW_RA_ACTIVE);
|
|
break;
|
|
|
|
case FW_CMD_RA_REFRESH_N:
|
|
RT_TRACE(COMP_CMD, "[FW CMD] Set RA refresh!! N\n");
|
|
if(priv->ieee80211->pHTInfo->IOTRaFunc & HT_IOT_RAFUNC_DISABLE_ALL)
|
|
input = FW_RA_REFRESH;
|
|
else
|
|
input = FW_RA_REFRESH | (priv->ieee80211->pHTInfo->IOTRaFunc << 8);
|
|
write_nic_dword(dev, WFM5, input);
|
|
break;
|
|
case FW_CMD_RA_REFRESH_BG:
|
|
RT_TRACE(COMP_CMD, "[FW CMD] Set RA refresh!! B/G\n");
|
|
write_nic_dword(dev, WFM5, FW_RA_REFRESH);
|
|
ChkFwCmdIoDone(dev);
|
|
write_nic_dword(dev, WFM5, FW_RA_ENABLE_BG);
|
|
break;
|
|
|
|
case FW_CMD_IQK_ENABLE:
|
|
write_nic_dword(dev, WFM5, FW_IQK_ENABLE);
|
|
break;
|
|
|
|
case FW_CMD_TXPWR_TRACK_ENABLE:
|
|
write_nic_dword(dev, WFM5, FW_TXPWR_TRACK_ENABLE);
|
|
break;
|
|
|
|
case FW_CMD_TXPWR_TRACK_DISABLE:
|
|
write_nic_dword(dev, WFM5, FW_TXPWR_TRACK_DISABLE);
|
|
break;
|
|
|
|
default:
|
|
RT_TRACE(COMP_CMD,"Unknown FW Cmd IO(%#x)\n", priv->CurrentFwCmdIO);
|
|
break;
|
|
}
|
|
|
|
ChkFwCmdIoDone(dev);
|
|
|
|
switch(priv->CurrentFwCmdIO)
|
|
{
|
|
case FW_CMD_HIGH_PWR_DISABLE:
|
|
//if(pMgntInfo->bTurboScan)
|
|
{
|
|
//Lower initial gain
|
|
rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bMaskByte0, 0x17);
|
|
rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bMaskByte0, 0x17);
|
|
// CCA threshold
|
|
rtl8192_setBBreg(dev, rCCK0_CCA, bMaskByte2, 0x40);
|
|
// Disable OFDM Part
|
|
rtl8192_setBBreg(dev, rOFDM0_TRMuxPar, bMaskByte2, 0x1);
|
|
ScanRegister = rtl8192_QueryBBReg(dev, rOFDM0_RxDetector1,bMaskDWord);
|
|
rtl8192_setBBreg(dev, rOFDM0_RxDetector1, 0xf, 0xf);
|
|
rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0);
|
|
}
|
|
break;
|
|
|
|
case FW_CMD_HIGH_PWR_ENABLE:
|
|
//if(pMgntInfo->bTurboScan)
|
|
{
|
|
rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bMaskByte0, 0x36);
|
|
rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bMaskByte0, 0x36);
|
|
|
|
// CCA threshold
|
|
rtl8192_setBBreg(dev, rCCK0_CCA, bMaskByte2, 0x83);
|
|
// Enable OFDM Part
|
|
rtl8192_setBBreg(dev, rOFDM0_TRMuxPar, bMaskByte2, 0x0);
|
|
|
|
//LZM ADD because sometimes there is no FW_CMD_HIGH_PWR_DISABLE, this value will be 0.
|
|
if(ScanRegister != 0){
|
|
rtl8192_setBBreg(dev, rOFDM0_RxDetector1, bMaskDWord, ScanRegister);
|
|
}
|
|
|
|
if(priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R)
|
|
rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x3);
|
|
else
|
|
rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x1);
|
|
}
|
|
break;
|
|
}
|
|
|
|
priv->SetFwCmdInProgress = false;// Clear FW CMD operation flag.
|
|
RT_TRACE(COMP_CMD, "<---SetFwCmdIOWorkItemCallback()\n");
|
|
|
|
}
|
|
|