![david woo](/assets/img/avatar_default.png)
This patch should allow the driver to consume a lot less power. Signed-off-by: david woo <xinhua_wu@realsil.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
820 lines
29 KiB
C
820 lines
29 KiB
C
/*
|
|
This is part of rtl8187 OpenSource driver.
|
|
Copyright (C) Andrea Merello 2004-2005 <andreamrl@tiscali.it>
|
|
Released under the terms of GPL (General Public Licence)
|
|
|
|
Parts of this driver are based on the GPL part of the
|
|
official Realtek driver.
|
|
Parts of this driver are based on the rtl8180 driver skeleton
|
|
from Patric Schenke & Andres Salomon.
|
|
Parts of this driver are based on the Intel Pro Wireless
|
|
2100 GPL driver.
|
|
|
|
We want to tanks the Authors of those projects
|
|
and the Ndiswrapper project Authors.
|
|
*/
|
|
|
|
/* Mariusz Matuszek added full registers definition with Realtek's name */
|
|
|
|
/* this file contains register definitions for the rtl8187 MAC controller */
|
|
#ifndef R8180_HW
|
|
#define R8180_HW
|
|
|
|
typedef enum _VERSION_8190{
|
|
// RTL8190
|
|
VERSION_8190_BD=0x3,
|
|
VERSION_8190_BE
|
|
}VERSION_8190,*PVERSION_8190;
|
|
//added for different RF type
|
|
typedef enum _RT_RF_TYPE_DEF
|
|
{
|
|
RF_1T2R = 0,
|
|
RF_2T4R,
|
|
|
|
RF_819X_MAX_TYPE
|
|
}RT_RF_TYPE_DEF;
|
|
|
|
typedef enum _BaseBand_Config_Type{
|
|
BaseBand_Config_PHY_REG = 0, //Radio Path A
|
|
BaseBand_Config_AGC_TAB = 1, //Radio Path B
|
|
}BaseBand_Config_Type, *PBaseBand_Config_Type;
|
|
#if 0
|
|
typedef enum _RT_RF_TYPE_819xU{
|
|
RF_TYPE_MIN = 0,
|
|
RF_8225,
|
|
RF_8256,
|
|
RF_8258,
|
|
RF_PSEUDO_11N = 4,
|
|
}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU;
|
|
#endif
|
|
#define RTL8187_REQT_READ 0xc0
|
|
#define RTL8187_REQT_WRITE 0x40
|
|
#define RTL8187_REQ_GET_REGS 0x05
|
|
#define RTL8187_REQ_SET_REGS 0x05
|
|
|
|
#define R8180_MAX_RETRY 255
|
|
#define MAX_TX_URB 5
|
|
#define MAX_RX_URB 16
|
|
//#define MAX_RX_NORMAL_URB 3
|
|
//#define MAX_RX_COMMAND_URB 2
|
|
#define RX_URB_SIZE 9100
|
|
|
|
#define BB_ANTATTEN_CHAN14 0x0c
|
|
#define BB_ANTENNA_B 0x40
|
|
|
|
#define BB_HOST_BANG (1<<30)
|
|
#define BB_HOST_BANG_EN (1<<2)
|
|
#define BB_HOST_BANG_CLK (1<<1)
|
|
#define BB_HOST_BANG_RW (1<<3)
|
|
#define BB_HOST_BANG_DATA 1
|
|
|
|
//#if (RTL819X_FPGA_VER & RTL819X_FPGA_VIVI_070920)
|
|
#define RTL8190_EEPROM_ID 0x8129
|
|
#define EEPROM_VID 0x02
|
|
#define EEPROM_DID 0x04
|
|
#define EEPROM_NODE_ADDRESS_BYTE_0 0x0C
|
|
|
|
#define EEPROM_TxPowerDiff 0x1F
|
|
|
|
|
|
#define EEPROM_PwDiff 0x21 //0x21
|
|
#define EEPROM_CrystalCap 0x22 //0x22
|
|
|
|
|
|
|
|
#define EEPROM_TxPwIndex_CCK_V1 0x29 //0x29~0x2B
|
|
#define EEPROM_TxPwIndex_OFDM_24G_V1 0x2C //0x2C~0x2E
|
|
#define EEPROM_TxPwIndex_Ver 0x27 //0x27
|
|
|
|
#define EEPROM_Default_TxPowerDiff 0x0
|
|
#define EEPROM_Default_ThermalMeter 0x77
|
|
#define EEPROM_Default_AntTxPowerDiff 0x0
|
|
#define EEPROM_Default_TxPwDiff_CrystalCap 0x5
|
|
#define EEPROM_Default_PwDiff 0x4
|
|
#define EEPROM_Default_CrystalCap 0x5
|
|
#define EEPROM_Default_TxPower 0x1010
|
|
#define EEPROM_ICVersion_ChannelPlan 0x7C //0x7C:ChannelPlan, 0x7D:IC_Version
|
|
#define EEPROM_Customer_ID 0x7B //0x7B:CustomerID
|
|
#ifdef RTL8190P
|
|
#define EEPROM_RFInd_PowerDiff 0x14
|
|
#define EEPROM_ThermalMeter 0x15
|
|
#define EEPROM_TxPwDiff_CrystalCap 0x16
|
|
#define EEPROM_TxPwIndex_CCK 0x18 //0x18~0x25
|
|
#define EEPROM_TxPwIndex_OFDM_24G 0x26 //0x26~0x33
|
|
#define EEPROM_TxPwIndex_OFDM_5G 0x34 //0x34~0x7B
|
|
#define EEPROM_C56_CrystalCap 0x17 //0x17
|
|
#define EEPROM_C56_RfA_CCK_Chnl1_TxPwIndex 0x80 //0x80
|
|
#define EEPROM_C56_RfA_HT_OFDM_TxPwIndex 0x81 //0x81~0x83
|
|
#define EEPROM_C56_RfC_CCK_Chnl1_TxPwIndex 0xbc //0xb8
|
|
#define EEPROM_C56_RfC_HT_OFDM_TxPwIndex 0xb9 //0xb9~0xbb
|
|
#else
|
|
#ifdef RTL8192E
|
|
#define EEPROM_RFInd_PowerDiff 0x28
|
|
#define EEPROM_ThermalMeter 0x29
|
|
#define EEPROM_TxPwDiff_CrystalCap 0x2A //0x2A~0x2B
|
|
#define EEPROM_TxPwIndex_CCK 0x2C //0x23
|
|
#define EEPROM_TxPwIndex_OFDM_24G 0x3A //0x24~0x26
|
|
#endif
|
|
#endif
|
|
#define EEPROM_Default_TxPowerLevel 0x10
|
|
//#define EEPROM_ChannelPlan 0x7c //0x7C
|
|
#define EEPROM_IC_VER 0x7d //0x7D
|
|
#define EEPROM_CRC 0x7e //0x7E~0x7F
|
|
|
|
#define EEPROM_CID_DEFAULT 0x0
|
|
#define EEPROM_CID_CAMEO 0x1
|
|
#define EEPROM_CID_RUNTOP 0x2
|
|
#define EEPROM_CID_Senao 0x3
|
|
#define EEPROM_CID_TOSHIBA 0x4 // Toshiba setting, Merge by Jacken, 2008/01/31
|
|
#define EEPROM_CID_NetCore 0x5
|
|
#define EEPROM_CID_Nettronix 0x6
|
|
#define EEPROM_CID_Pronet 0x7
|
|
#define EEPROM_CID_DLINK 0x8
|
|
#define EEPROM_CID_WHQL 0xFE //added by sherry for dtm, 20080728
|
|
//#endif
|
|
enum _RTL8192Pci_HW {
|
|
MAC0 = 0x000,
|
|
MAC1 = 0x001,
|
|
MAC2 = 0x002,
|
|
MAC3 = 0x003,
|
|
MAC4 = 0x004,
|
|
MAC5 = 0x005,
|
|
PCIF = 0x009, // PCI Function Register 0x0009h~0x000bh
|
|
//----------------------------------------------------------------------------
|
|
// 8190 PCIF bits (Offset 0x009-000b, 24bit)
|
|
//----------------------------------------------------------------------------
|
|
#define MXDMA2_16bytes 0x000
|
|
#define MXDMA2_32bytes 0x001
|
|
#define MXDMA2_64bytes 0x010
|
|
#define MXDMA2_128bytes 0x011
|
|
#define MXDMA2_256bytes 0x100
|
|
#define MXDMA2_512bytes 0x101
|
|
#define MXDMA2_1024bytes 0x110
|
|
#define MXDMA2_NoLimit 0x7
|
|
|
|
#define MULRW_SHIFT 3
|
|
#define MXDMA2_RX_SHIFT 4
|
|
#define MXDMA2_TX_SHIFT 0
|
|
PMR = 0x00c, // Power management register
|
|
EPROM_CMD = 0x00e,
|
|
#define EPROM_CMD_RESERVED_MASK BIT5
|
|
#define EPROM_CMD_9356SEL BIT4
|
|
#define EPROM_CMD_OPERATING_MODE_SHIFT 6
|
|
#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
|
|
#define EPROM_CMD_CONFIG 0x3
|
|
#define EPROM_CMD_NORMAL 0
|
|
#define EPROM_CMD_LOAD 1
|
|
#define EPROM_CMD_PROGRAM 2
|
|
#define EPROM_CS_SHIFT 3
|
|
#define EPROM_CK_SHIFT 2
|
|
#define EPROM_W_SHIFT 1
|
|
#define EPROM_R_SHIFT 0
|
|
|
|
AFR = 0x010,
|
|
#define AFR_CardBEn (1<<0)
|
|
#define AFR_CLKRUN_SEL (1<<1)
|
|
#define AFR_FuncRegEn (1<<2)
|
|
|
|
ANAPAR = 0x17,
|
|
#define BB_GLOBAL_RESET_BIT 0x1
|
|
BB_GLOBAL_RESET = 0x020, // BasebandGlobal Reset Register
|
|
BSSIDR = 0x02E, // BSSID Register
|
|
CMDR = 0x037, // Command register
|
|
#define CR_RST 0x10
|
|
#define CR_RE 0x08
|
|
#define CR_TE 0x04
|
|
#define CR_MulRW 0x01
|
|
SIFS = 0x03E, // SIFS register
|
|
TCR = 0x040, // Transmit Configuration Register
|
|
RCR = 0x044, // Receive Configuration Register
|
|
//----------------------------------------------------------------------------
|
|
//// 8190 (RCR) Receive Configuration Register (Offset 0x44~47, 32 bit)
|
|
////----------------------------------------------------------------------------
|
|
#define RCR_FILTER_MASK (BIT0|BIT1|BIT2|BIT3|BIT5|BIT12|BIT18|BIT19|BIT20|BIT21|BIT22|BIT23)
|
|
#define RCR_ONLYERLPKT BIT31 // Early Receiving based on Packet Size.
|
|
#define RCR_ENCS2 BIT30 // Enable Carrier Sense Detection Method 2
|
|
#define RCR_ENCS1 BIT29 // Enable Carrier Sense Detection Method 1
|
|
#define RCR_ENMBID BIT27 // Enable Multiple BssId.
|
|
#define RCR_ACKTXBW (BIT24|BIT25) // TXBW Setting of ACK frames
|
|
#define RCR_CBSSID BIT23 // Accept BSSID match packet
|
|
#define RCR_APWRMGT BIT22 // Accept power management packet
|
|
#define RCR_ADD3 BIT21 // Accept address 3 match packet
|
|
#define RCR_AMF BIT20 // Accept management type frame
|
|
#define RCR_ACF BIT19 // Accept control type frame
|
|
#define RCR_ADF BIT18 // Accept data type frame
|
|
#define RCR_RXFTH BIT13 // Rx FIFO Threshold
|
|
#define RCR_AICV BIT12 // Accept ICV error packet
|
|
#define RCR_ACRC32 BIT5 // Accept CRC32 error packet
|
|
#define RCR_AB BIT3 // Accept broadcast packet
|
|
#define RCR_AM BIT2 // Accept multicast packet
|
|
#define RCR_APM BIT1 // Accept physical match packet
|
|
#define RCR_AAP BIT0 // Accept all unicast packet
|
|
#define RCR_MXDMA_OFFSET 8
|
|
#define RCR_FIFO_OFFSET 13
|
|
SLOT_TIME = 0x049, // Slot Time Register
|
|
ACK_TIMEOUT = 0x04c, // Ack Timeout Register
|
|
PIFS_TIME = 0x04d, // PIFS time
|
|
USTIME = 0x04e, // Microsecond Tuning Register, Sets the microsecond time unit used by MAC clock.
|
|
EDCAPARA_BE = 0x050, // EDCA Parameter of AC BE
|
|
EDCAPARA_BK = 0x054, // EDCA Parameter of AC BK
|
|
EDCAPARA_VO = 0x058, // EDCA Parameter of AC VO
|
|
EDCAPARA_VI = 0x05C, // EDCA Parameter of AC VI
|
|
#define AC_PARAM_TXOP_LIMIT_OFFSET 16
|
|
#define AC_PARAM_ECW_MAX_OFFSET 12
|
|
#define AC_PARAM_ECW_MIN_OFFSET 8
|
|
#define AC_PARAM_AIFS_OFFSET 0
|
|
RFPC = 0x05F, // Rx FIFO Packet Count
|
|
CWRR = 0x060, // Contention Window Report Register
|
|
BCN_TCFG = 0x062, // Beacon Time Configuration
|
|
#define BCN_TCFG_CW_SHIFT 8
|
|
#define BCN_TCFG_IFS 0
|
|
BCN_INTERVAL = 0x070, // Beacon Interval (TU)
|
|
ATIMWND = 0x072, // ATIM Window Size (TU)
|
|
BCN_DRV_EARLY_INT = 0x074, // Driver Early Interrupt Time (TU). Time to send interrupt to notify to change beacon content before TBTT
|
|
#define BCN_DRV_EARLY_INT_SWBCN_SHIFT 8
|
|
#define BCN_DRV_EARLY_INT_TIME_SHIFT 0
|
|
BCN_DMATIME = 0x076, // Beacon DMA and ATIM interrupt time (US). Indicates the time before TBTT to perform beacon queue DMA
|
|
BCN_ERR_THRESH = 0x078, // Beacon Error Threshold
|
|
RWCAM = 0x0A0, //IN 8190 Data Sheet is called CAMcmd
|
|
//----------------------------------------------------------------------------
|
|
//// 8190 CAM Command Register (offset 0xA0, 4 byte)
|
|
////----------------------------------------------------------------------------
|
|
#define CAM_CM_SecCAMPolling BIT31 //Security CAM Polling
|
|
#define CAM_CM_SecCAMClr BIT30 //Clear all bits in CAM
|
|
#define CAM_CM_SecCAMWE BIT16 //Security CAM enable
|
|
#define CAM_VALID BIT15
|
|
#define CAM_NOTVALID 0x0000
|
|
#define CAM_USEDK BIT5
|
|
|
|
#define CAM_NONE 0x0
|
|
#define CAM_WEP40 0x01
|
|
#define CAM_TKIP 0x02
|
|
#define CAM_AES 0x04
|
|
#define CAM_WEP104 0x05
|
|
|
|
#define TOTAL_CAM_ENTRY 32
|
|
|
|
#define CAM_CONFIG_USEDK true
|
|
#define CAM_CONFIG_NO_USEDK false
|
|
#define CAM_WRITE BIT16
|
|
#define CAM_READ 0x00000000
|
|
#define CAM_POLLINIG BIT31
|
|
#define SCR_UseDK 0x01
|
|
WCAMI = 0x0A4, // Software write CAM input content
|
|
RCAMO = 0x0A8, // Software read/write CAM config
|
|
SECR = 0x0B0, //Security Configuration Register
|
|
#define SCR_TxUseDK BIT0 //Force Tx Use Default Key
|
|
#define SCR_RxUseDK BIT1 //Force Rx Use Default Key
|
|
#define SCR_TxEncEnable BIT2 //Enable Tx Encryption
|
|
#define SCR_RxDecEnable BIT3 //Enable Rx Decryption
|
|
#define SCR_SKByA2 BIT4 //Search kEY BY A2
|
|
#define SCR_NoSKMC BIT5 //No Key Search for Multicast
|
|
SWREGULATOR = 0x0BD, // Switching Regulator
|
|
INTA_MASK = 0x0f4,
|
|
//----------------------------------------------------------------------------
|
|
// 8190 IMR/ISR bits (offset 0xfd, 8bits)
|
|
//----------------------------------------------------------------------------
|
|
#define IMR8190_DISABLED 0x0
|
|
#define IMR_ATIMEND BIT28 // ATIM Window End Interrupt
|
|
#define IMR_TBDOK BIT27 // Transmit Beacon OK Interrupt
|
|
#define IMR_TBDER BIT26 // Transmit Beacon Error Interrupt
|
|
#define IMR_TXFOVW BIT15 // Transmit FIFO Overflow
|
|
#define IMR_TIMEOUT0 BIT14 // TimeOut0
|
|
#define IMR_BcnInt BIT13 // Beacon DMA Interrupt 0
|
|
#define IMR_RXFOVW BIT12 // Receive FIFO Overflow
|
|
#define IMR_RDU BIT11 // Receive Descriptor Unavailable
|
|
#define IMR_RXCMDOK BIT10 // Receive Command Packet OK
|
|
#define IMR_BDOK BIT9 // Beacon Queue DMA OK Interrup
|
|
#define IMR_HIGHDOK BIT8 // High Queue DMA OK Interrupt
|
|
#define IMR_COMDOK BIT7 // Command Queue DMA OK Interrupt
|
|
#define IMR_MGNTDOK BIT6 // Management Queue DMA OK Interrupt
|
|
#define IMR_HCCADOK BIT5 // HCCA Queue DMA OK Interrupt
|
|
#define IMR_BKDOK BIT4 // AC_BK DMA OK Interrupt
|
|
#define IMR_BEDOK BIT3 // AC_BE DMA OK Interrupt
|
|
#define IMR_VIDOK BIT2 // AC_VI DMA OK Interrupt
|
|
#define IMR_VODOK BIT1 // AC_VO DMA Interrupt
|
|
#define IMR_ROK BIT0 // Receive DMA OK Interrupt
|
|
ISR = 0x0f8, // Interrupt Status Register
|
|
TPPoll = 0x0fd, // Transmit priority polling register
|
|
#define TPPoll_BKQ BIT0 // BK queue polling
|
|
#define TPPoll_BEQ BIT1 // BE queue polling
|
|
#define TPPoll_VIQ BIT2 // VI queue polling
|
|
#define TPPoll_VOQ BIT3 // VO queue polling
|
|
#define TPPoll_BQ BIT4 // Beacon queue polling
|
|
#define TPPoll_CQ BIT5 // Command queue polling
|
|
#define TPPoll_MQ BIT6 // Management queue polling
|
|
#define TPPoll_HQ BIT7 // High queue polling
|
|
#define TPPoll_HCCAQ BIT8 // HCCA queue polling
|
|
#define TPPoll_StopBK BIT9 // Stop BK queue
|
|
#define TPPoll_StopBE BIT10 // Stop BE queue
|
|
#define TPPoll_StopVI BIT11 // Stop VI queue
|
|
#define TPPoll_StopVO BIT12 // Stop VO queue
|
|
#define TPPoll_StopMgt BIT13 // Stop Mgnt queue
|
|
#define TPPoll_StopHigh BIT14 // Stop High queue
|
|
#define TPPoll_StopHCCA BIT15 // Stop HCCA queue
|
|
#define TPPoll_SHIFT 8 // Queue ID mapping
|
|
|
|
PSR = 0x0ff, // Page Select Register
|
|
#define PSR_GEN 0x0 // Page 0 register general MAC Control
|
|
#define PSR_CPU 0x1 // Page 1 register for CPU
|
|
CPU_GEN = 0x100, // CPU Reset Register
|
|
BB_RESET = 0x101, // Baseband Reset
|
|
//----------------------------------------------------------------------------
|
|
// 8190 CPU General Register (offset 0x100, 4 byte)
|
|
//----------------------------------------------------------------------------
|
|
#define CPU_CCK_LOOPBACK 0x00030000
|
|
#define CPU_GEN_SYSTEM_RESET 0x00000001
|
|
#define CPU_GEN_FIRMWARE_RESET 0x00000008
|
|
#define CPU_GEN_BOOT_RDY 0x00000010
|
|
#define CPU_GEN_FIRM_RDY 0x00000020
|
|
#define CPU_GEN_PUT_CODE_OK 0x00000080
|
|
#define CPU_GEN_BB_RST 0x00000100
|
|
#define CPU_GEN_PWR_STB_CPU 0x00000004
|
|
#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
|
|
#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1
|
|
#define CPU_GEN_GPIO_UART 0x00007000
|
|
|
|
LED1Cfg = 0x154,// LED1 Configuration Register
|
|
LED0Cfg = 0x155,// LED0 Configuration Register
|
|
|
|
AcmAvg = 0x170, // ACM Average Period Register
|
|
AcmHwCtrl = 0x171, // ACM Hardware Control Register
|
|
//----------------------------------------------------------------------------
|
|
//
|
|
// 8190 AcmHwCtrl bits (offset 0x171, 1 byte)
|
|
//----------------------------------------------------------------------------
|
|
#define AcmHw_HwEn BIT0
|
|
#define AcmHw_BeqEn BIT1
|
|
#define AcmHw_ViqEn BIT2
|
|
#define AcmHw_VoqEn BIT3
|
|
#define AcmHw_BeqStatus BIT4
|
|
#define AcmHw_ViqStatus BIT5
|
|
#define AcmHw_VoqStatus BIT6
|
|
AcmFwCtrl = 0x172, // ACM Firmware Control Register
|
|
#define AcmFw_BeqStatus BIT0
|
|
#define AcmFw_ViqStatus BIT1
|
|
#define AcmFw_VoqStatus BIT2
|
|
VOAdmTime = 0x174, // VO Queue Admitted Time Register
|
|
VIAdmTime = 0x178, // VI Queue Admitted Time Register
|
|
BEAdmTime = 0x17C, // BE Queue Admitted Time Register
|
|
RQPN1 = 0x180, // Reserved Queue Page Number , Vo Vi, Be, Bk
|
|
RQPN2 = 0x184, // Reserved Queue Page Number, HCCA, Cmd, Mgnt, High
|
|
RQPN3 = 0x188, // Reserved Queue Page Number, Bcn, Public,
|
|
QPRR = 0x1E0, // Queue Page Report per TID
|
|
QPNR = 0x1F0, // Queue Packet Number report per TID
|
|
/* there's 9 tx descriptor base address available */
|
|
BQDA = 0x200, // Beacon Queue Descriptor Address
|
|
HQDA = 0x204, // High Priority Queue Descriptor Address
|
|
CQDA = 0x208, // Command Queue Descriptor Address
|
|
MQDA = 0x20C, // Management Queue Descriptor Address
|
|
HCCAQDA = 0x210, // HCCA Queue Descriptor Address
|
|
VOQDA = 0x214, // VO Queue Descriptor Address
|
|
VIQDA = 0x218, // VI Queue Descriptor Address
|
|
BEQDA = 0x21C, // BE Queue Descriptor Address
|
|
BKQDA = 0x220, // BK Queue Descriptor Address
|
|
/* there's 2 rx descriptor base address availalbe */
|
|
RCQDA = 0x224, // Receive command Queue Descriptor Address
|
|
RDQDA = 0x228, // Receive Queue Descriptor Start Address
|
|
|
|
MAR0 = 0x240, // Multicast filter.
|
|
MAR4 = 0x244,
|
|
|
|
CCX_PERIOD = 0x250, // CCX Measurement Period Register, in unit of TU.
|
|
CLM_RESULT = 0x251, // CCA Busy fraction register.
|
|
NHM_PERIOD = 0x252, // NHM Measurement Period register, in unit of TU.
|
|
|
|
NHM_THRESHOLD0 = 0x253, // Noise Histogram Meashorement0.
|
|
NHM_THRESHOLD1 = 0x254, // Noise Histogram Meashorement1.
|
|
NHM_THRESHOLD2 = 0x255, // Noise Histogram Meashorement2.
|
|
NHM_THRESHOLD3 = 0x256, // Noise Histogram Meashorement3.
|
|
NHM_THRESHOLD4 = 0x257, // Noise Histogram Meashorement4.
|
|
NHM_THRESHOLD5 = 0x258, // Noise Histogram Meashorement5.
|
|
NHM_THRESHOLD6 = 0x259, // Noise Histogram Meashorement6
|
|
|
|
MCTRL = 0x25A, // Measurement Control
|
|
|
|
NHM_RPI_COUNTER0 = 0x264, // Noise Histogram RPI counter0, the fraction of signal strength < NHM_THRESHOLD0.
|
|
NHM_RPI_COUNTER1 = 0x265, // Noise Histogram RPI counter1, the fraction of signal strength in (NHM_THRESHOLD0, NHM_THRESHOLD1].
|
|
NHM_RPI_COUNTER2 = 0x266, // Noise Histogram RPI counter2, the fraction of signal strength in (NHM_THRESHOLD1, NHM_THRESHOLD2].
|
|
NHM_RPI_COUNTER3 = 0x267, // Noise Histogram RPI counter3, the fraction of signal strength in (NHM_THRESHOLD2, NHM_THRESHOLD3].
|
|
NHM_RPI_COUNTER4 = 0x268, // Noise Histogram RPI counter4, the fraction of signal strength in (NHM_THRESHOLD3, NHM_THRESHOLD4].
|
|
NHM_RPI_COUNTER5 = 0x269, // Noise Histogram RPI counter5, the fraction of signal strength in (NHM_THRESHOLD4, NHM_THRESHOLD5].
|
|
NHM_RPI_COUNTER6 = 0x26A, // Noise Histogram RPI counter6, the fraction of signal strength in (NHM_THRESHOLD5, NHM_THRESHOLD6].
|
|
NHM_RPI_COUNTER7 = 0x26B, // Noise Histogram RPI counter7, the fraction of signal strength in (NHM_THRESHOLD6, NHM_THRESHOLD7].
|
|
WFCRC0 = 0x2f0,
|
|
WFCRC1 = 0x2f4,
|
|
WFCRC2 = 0x2f8,
|
|
|
|
BW_OPMODE = 0x300, // Bandwidth operation mode
|
|
#define BW_OPMODE_11J BIT0
|
|
#define BW_OPMODE_5G BIT1
|
|
#define BW_OPMODE_20MHZ BIT2
|
|
IC_VERRSION = 0x301, //IC_VERSION
|
|
MSR = 0x303, // Media Status register
|
|
#define MSR_LINK_MASK ((1<<0)|(1<<1))
|
|
#define MSR_LINK_MANAGED 2
|
|
#define MSR_LINK_NONE 0
|
|
#define MSR_LINK_SHIFT 0
|
|
#define MSR_LINK_ADHOC 1
|
|
#define MSR_LINK_MASTER 3
|
|
#define MSR_LINK_ENEDCA (1<<4)
|
|
RETRY_LIMIT = 0x304, // Retry Limit [15:8]-short, [7:0]-long
|
|
#define RETRY_LIMIT_SHORT_SHIFT 8
|
|
#define RETRY_LIMIT_LONG_SHIFT 0
|
|
TSFR = 0x308,
|
|
RRSR = 0x310, // Response Rate Set
|
|
#define RRSR_RSC_OFFSET 21
|
|
#define RRSR_SHORT_OFFSET 23
|
|
#define RRSR_RSC_DUPLICATE 0x600000
|
|
#define RRSR_RSC_UPSUBCHNL 0x400000
|
|
#define RRSR_RSC_LOWSUBCHNL 0x200000
|
|
#define RRSR_SHORT 0x800000
|
|
#define RRSR_1M BIT0
|
|
#define RRSR_2M BIT1
|
|
#define RRSR_5_5M BIT2
|
|
#define RRSR_11M BIT3
|
|
#define RRSR_6M BIT4
|
|
#define RRSR_9M BIT5
|
|
#define RRSR_12M BIT6
|
|
#define RRSR_18M BIT7
|
|
#define RRSR_24M BIT8
|
|
#define RRSR_36M BIT9
|
|
#define RRSR_48M BIT10
|
|
#define RRSR_54M BIT11
|
|
#define RRSR_MCS0 BIT12
|
|
#define RRSR_MCS1 BIT13
|
|
#define RRSR_MCS2 BIT14
|
|
#define RRSR_MCS3 BIT15
|
|
#define RRSR_MCS4 BIT16
|
|
#define RRSR_MCS5 BIT17
|
|
#define RRSR_MCS6 BIT18
|
|
#define RRSR_MCS7 BIT19
|
|
#define BRSR_AckShortPmb BIT23 // CCK ACK: use Short Preamble or not
|
|
UFWP = 0x318,
|
|
RATR0 = 0x320, // Rate Adaptive Table register1
|
|
//----------------------------------------------------------------------------
|
|
// 8190 Rate Adaptive Table Register (offset 0x320, 4 byte)
|
|
//----------------------------------------------------------------------------
|
|
//CCK
|
|
#define RATR_1M 0x00000001
|
|
#define RATR_2M 0x00000002
|
|
#define RATR_55M 0x00000004
|
|
#define RATR_11M 0x00000008
|
|
//OFDM
|
|
#define RATR_6M 0x00000010
|
|
#define RATR_9M 0x00000020
|
|
#define RATR_12M 0x00000040
|
|
#define RATR_18M 0x00000080
|
|
#define RATR_24M 0x00000100
|
|
#define RATR_36M 0x00000200
|
|
#define RATR_48M 0x00000400
|
|
#define RATR_54M 0x00000800
|
|
//MCS 1 Spatial Stream
|
|
#define RATR_MCS0 0x00001000
|
|
#define RATR_MCS1 0x00002000
|
|
#define RATR_MCS2 0x00004000
|
|
#define RATR_MCS3 0x00008000
|
|
#define RATR_MCS4 0x00010000
|
|
#define RATR_MCS5 0x00020000
|
|
#define RATR_MCS6 0x00040000
|
|
#define RATR_MCS7 0x00080000
|
|
//MCS 2 Spatial Stream
|
|
#define RATR_MCS8 0x00100000
|
|
#define RATR_MCS9 0x00200000
|
|
#define RATR_MCS10 0x00400000
|
|
#define RATR_MCS11 0x00800000
|
|
#define RATR_MCS12 0x01000000
|
|
#define RATR_MCS13 0x02000000
|
|
#define RATR_MCS14 0x04000000
|
|
#define RATR_MCS15 0x08000000
|
|
// ALL CCK Rate
|
|
#define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M
|
|
#define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M|RATR_36M|RATR_48M|RATR_54M
|
|
#define RATE_ALL_OFDM_1SS RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 | \
|
|
RATR_MCS4|RATR_MCS5|RATR_MCS6 |RATR_MCS7
|
|
#define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11| \
|
|
RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15
|
|
|
|
|
|
DRIVER_RSSI = 0x32c, // Driver tell Firmware current RSSI
|
|
MCS_TXAGC = 0x340, // MCS AGC
|
|
CCK_TXAGC = 0x348, // CCK AGC
|
|
// IMR = 0x354, // Interrupt Mask Register
|
|
// IMR_POLL = 0x360,
|
|
MacBlkCtrl = 0x403, // Mac block on/off control register
|
|
|
|
//Cmd9346CR = 0x00e,
|
|
//#define Cmd9346CR_9356SEL (1<<4)
|
|
#if 0
|
|
/* 0x0006 - 0x0007 - reserved */
|
|
RXFIFOCOUNT = 0x010,
|
|
TXFIFOCOUNT = 0x012,
|
|
BQREQ = 0x013,
|
|
/* 0x0010 - 0x0017 - reserved */
|
|
TSFTR = 0x018,
|
|
TLPDA = 0x020,
|
|
TNPDA = 0x024,
|
|
THPDA = 0x028,
|
|
BSSID = 0x02E,
|
|
RESP_RATE = 0x034,
|
|
CMD = 0x037,
|
|
#define CMD_RST_SHIFT 4
|
|
#define CMD_RESERVED_MASK ((1<<1) | (1<<5) | (1<<6) | (1<<7))
|
|
#define CMD_RX_ENABLE_SHIFT 3
|
|
#define CMD_TX_ENABLE_SHIFT 2
|
|
#define CR_RST ((1<< 4))
|
|
#define CR_RE ((1<< 3))
|
|
#define CR_TE ((1<< 2))
|
|
#define CR_MulRW ((1<< 0))
|
|
|
|
INTA = 0x03e,
|
|
#endif
|
|
|
|
///////////////////
|
|
//////////////////
|
|
#if 0
|
|
TX_CONF = 0x040,
|
|
#define TX_CONF_HEADER_AUTOICREMENT_SHIFT 30
|
|
#define TX_LOOPBACK_SHIFT 17
|
|
#define TX_LOOPBACK_MAC 1
|
|
#define TX_LOOPBACK_BASEBAND 2
|
|
#define TX_LOOPBACK_NONE 0
|
|
#define TX_LOOPBACK_CONTINUE 3
|
|
#define TX_LOOPBACK_MASK ((1<<17)|(1<<18))
|
|
#define TX_LRLRETRY_SHIFT 0
|
|
#define TX_SRLRETRY_SHIFT 8
|
|
#define TX_NOICV_SHIFT 19
|
|
#define TX_NOCRC_SHIFT 16
|
|
#define TCR_DurProcMode ((1<<30))
|
|
#define TCR_DISReqQsize ((1<<28))
|
|
#define TCR_HWVERID_MASK ((1<<27)|(1<<26)|(1<<25))
|
|
#define TCR_HWVERID_SHIFT 25
|
|
#define TCR_SWPLCPLEN ((1<<24))
|
|
#define TCR_PLCP_LEN TCR_SAT // rtl8180
|
|
#define TCR_MXDMA_MASK ((1<<23)|(1<<22)|(1<<21))
|
|
#define TCR_MXDMA_1024 6
|
|
#define TCR_MXDMA_2048 7
|
|
#define TCR_MXDMA_SHIFT 21
|
|
#define TCR_DISCW ((1<<20))
|
|
#define TCR_ICV ((1<<19))
|
|
#define TCR_LBK ((1<<18)|(1<<17))
|
|
#define TCR_LBK1 ((1<<18))
|
|
#define TCR_LBK0 ((1<<17))
|
|
#define TCR_CRC ((1<<16))
|
|
#define TCR_SRL_MASK ((1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8))
|
|
#define TCR_LRL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<7))
|
|
#define TCR_PROBE_NOTIMESTAMP_SHIFT 29 //rtl8185
|
|
|
|
RX_CONF = 0x044,
|
|
#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
|
|
(1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
|
|
#define RX_CHECK_BSSID_SHIFT 23
|
|
#define ACCEPT_PWR_FRAME_SHIFT 22
|
|
#define ACCEPT_MNG_FRAME_SHIFT 20
|
|
#define ACCEPT_CTL_FRAME_SHIFT 19
|
|
#define ACCEPT_DATA_FRAME_SHIFT 18
|
|
#define ACCEPT_ICVERR_FRAME_SHIFT 12
|
|
#define ACCEPT_CRCERR_FRAME_SHIFT 5
|
|
#define ACCEPT_BCAST_FRAME_SHIFT 3
|
|
#define ACCEPT_MCAST_FRAME_SHIFT 2
|
|
#define ACCEPT_ALLMAC_FRAME_SHIFT 0
|
|
#define ACCEPT_NICMAC_FRAME_SHIFT 1
|
|
#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
|
|
#define RX_FIFO_THRESHOLD_SHIFT 13
|
|
#define RX_FIFO_THRESHOLD_128 3
|
|
#define RX_FIFO_THRESHOLD_256 4
|
|
#define RX_FIFO_THRESHOLD_512 5
|
|
#define RX_FIFO_THRESHOLD_1024 6
|
|
#define RX_FIFO_THRESHOLD_NONE 7
|
|
#define RX_AUTORESETPHY_SHIFT 28
|
|
#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
|
|
#define MAX_RX_DMA_2048 7
|
|
#define MAX_RX_DMA_1024 6
|
|
#define MAX_RX_DMA_SHIFT 10
|
|
#define RCR_ONLYERLPKT ((1<<31))
|
|
#define RCR_CS_SHIFT 29
|
|
#define RCR_CS_MASK ((1<<30) | (1<<29))
|
|
#define RCR_ENMARP ((1<<28))
|
|
#define RCR_CBSSID ((1<<23))
|
|
#define RCR_APWRMGT ((1<<22))
|
|
#define RCR_ADD3 ((1<<21))
|
|
#define RCR_AMF ((1<<20))
|
|
#define RCR_ACF ((1<<19))
|
|
#define RCR_ADF ((1<<18))
|
|
#define RCR_RXFTH ((1<<15)|(1<<14)|(1<<13))
|
|
#define RCR_RXFTH2 ((1<<15))
|
|
#define RCR_RXFTH1 ((1<<14))
|
|
#define RCR_RXFTH0 ((1<<13))
|
|
#define RCR_AICV ((1<<12))
|
|
#define RCR_MXDMA ((1<<10)|(1<< 9)|(1<< 8))
|
|
#define RCR_MXDMA2 ((1<<10))
|
|
#define RCR_MXDMA1 ((1<< 9))
|
|
#define RCR_MXDMA0 ((1<< 8))
|
|
#define RCR_9356SEL ((1<< 6))
|
|
#define RCR_ACRC32 ((1<< 5))
|
|
#define RCR_AB ((1<< 3))
|
|
#define RCR_AM ((1<< 2))
|
|
#define RCR_APM ((1<< 1))
|
|
#define RCR_AAP ((1<< 0))
|
|
|
|
INT_TIMEOUT = 0x048,
|
|
|
|
TX_BEACON_RING_ADDR = 0x04c,
|
|
|
|
#endif
|
|
#if 0
|
|
CONFIG0 = 0x051,
|
|
#define CONFIG0_WEP104 ((1<<6))
|
|
#define CONFIG0_LEDGPO_En ((1<<4))
|
|
#define CONFIG0_Aux_Status ((1<<3))
|
|
#define CONFIG0_GL ((1<<1)|(1<<0))
|
|
#define CONFIG0_GL1 ((1<<1))
|
|
#define CONFIG0_GL0 ((1<<0))
|
|
CONFIG1 = 0x052,
|
|
#define CONFIG1_LEDS ((1<<7)|(1<<6))
|
|
#define CONFIG1_LEDS1 ((1<<7))
|
|
#define CONFIG1_LEDS0 ((1<<6))
|
|
#define CONFIG1_LWACT ((1<<4))
|
|
#define CONFIG1_MEMMAP ((1<<3))
|
|
#define CONFIG1_IOMAP ((1<<2))
|
|
#define CONFIG1_VPD ((1<<1))
|
|
#define CONFIG1_PMEn ((1<<0))
|
|
CONFIG2 = 0x053,
|
|
#define CONFIG2_LCK ((1<<7))
|
|
#define CONFIG2_ANT ((1<<6))
|
|
#define CONFIG2_DPS ((1<<3))
|
|
#define CONFIG2_PAPE_sign ((1<<2))
|
|
#define CONFIG2_PAPE_time ((1<<1)|(1<<0))
|
|
#define CONFIG2_PAPE_time1 ((1<<1))
|
|
#define CONFIG2_PAPE_time0 ((1<<0))
|
|
ANA_PARAM = 0x054,
|
|
CONFIG3 = 0x059,
|
|
#define CONFIG3_GNTSel ((1<<7))
|
|
#define CONFIG3_PARM_En ((1<<6))
|
|
#define CONFIG3_Magic ((1<<5))
|
|
#define CONFIG3_CardB_En ((1<<3))
|
|
#define CONFIG3_CLKRUN_En ((1<<2))
|
|
#define CONFIG3_FuncRegEn ((1<<1))
|
|
#define CONFIG3_FBtbEn ((1<<0))
|
|
#define CONFIG3_CLKRUN_SHIFT 2
|
|
#define CONFIG3_ANAPARAM_W_SHIFT 6
|
|
CONFIG4 = 0x05a,
|
|
#define CONFIG4_VCOPDN ((1<<7))
|
|
#define CONFIG4_PWROFF ((1<<6))
|
|
#define CONFIG4_PWRMGT ((1<<5))
|
|
#define CONFIG4_LWPME ((1<<4))
|
|
#define CONFIG4_LWPTN ((1<<2))
|
|
#define CONFIG4_RFTYPE ((1<<1)|(1<<0))
|
|
#define CONFIG4_RFTYPE1 ((1<<1))
|
|
#define CONFIG4_RFTYPE0 ((1<<0))
|
|
TESTR = 0x05b,
|
|
#define TFPC_AC 0x05C
|
|
|
|
#define SCR 0x05F
|
|
PGSELECT = 0x05e,
|
|
#define PGSELECT_PG_SHIFT 0
|
|
SECURITY = 0x05f,
|
|
#define SECURITY_WEP_TX_ENABLE_SHIFT 1
|
|
#define SECURITY_WEP_RX_ENABLE_SHIFT 0
|
|
#define SECURITY_ENCRYP_104 1
|
|
#define SECURITY_ENCRYP_SHIFT 4
|
|
#define SECURITY_ENCRYP_MASK ((1<<4)|(1<<5))
|
|
|
|
ANA_PARAM2 = 0x060,
|
|
BEACON_INTERVAL = 0x070,
|
|
#define BEACON_INTERVAL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)| \
|
|
(1<<6)|(1<<7)|(1<<8)|(1<<9))
|
|
|
|
ATIM_WND = 0x072,
|
|
#define ATIM_WND_MASK (0x01FF)
|
|
|
|
BCN_INTR_ITV = 0x074,
|
|
#define BCN_INTR_ITV_MASK (0x01FF)
|
|
|
|
ATIM_INTR_ITV = 0x076,
|
|
#define ATIM_INTR_ITV_MASK (0x01FF)
|
|
|
|
AckTimeOutReg = 0x079, //ACK timeout register, in unit of 4 us.
|
|
PHY_ADR = 0x07c,
|
|
PHY_READ = 0x07e,
|
|
RFPinsOutput = 0x080,
|
|
RFPinsEnable = 0x082,
|
|
//Page 0
|
|
RFPinsSelect = 0x084,
|
|
#define SW_CONTROL_GPIO 0x400
|
|
RFPinsInput = 0x086,
|
|
RF_PARA = 0x088,
|
|
RF_TIMING = 0x08c,
|
|
GP_ENABLE = 0x090,
|
|
GPIO = 0x091,
|
|
TX_AGC_CTL = 0x09c,
|
|
#define TX_AGC_CTL_PER_PACKET_TXAGC 0x01
|
|
#define TX_AGC_CTL_PERPACKET_GAIN_SHIFT 0
|
|
#define TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT 1
|
|
#define TX_AGC_CTL_FEEDBACK_ANT 2
|
|
#define TXAGC_CTL_PER_PACKET_ANT_SEL 0x02
|
|
OFDM_TXAGC = 0x09e,
|
|
ANTSEL = 0x09f,
|
|
|
|
|
|
|
|
SIFS = 0x0b4,
|
|
DIFS = 0x0b5,
|
|
SLOT = 0x0b6,
|
|
CW_CONF = 0x0bc,
|
|
#define CW_CONF_PERPACKET_RETRY_LIMIT 0x02
|
|
#define CW_CONF_PERPACKET_CW 0x01
|
|
#define CW_CONF_PERPACKET_RETRY_SHIFT 1
|
|
#define CW_CONF_PERPACKET_CW_SHIFT 0
|
|
CW_VAL = 0x0bd,
|
|
RATE_FALLBACK = 0x0be,
|
|
#define MAX_RESP_RATE_SHIFT 4
|
|
#define MIN_RESP_RATE_SHIFT 0
|
|
#define RATE_FALLBACK_CTL_ENABLE 0x80
|
|
#define RATE_FALLBACK_CTL_AUTO_STEP0 0x00
|
|
ACM_CONTROL = 0x0BF, // ACM Control Registe
|
|
//----------------------------------------------------------------------------
|
|
// 8187B ACM_CONTROL bits (Offset 0xBF, 1 Byte)
|
|
//----------------------------------------------------------------------------
|
|
#define VOQ_ACM_EN (0x01 << 7) //BIT7
|
|
#define VIQ_ACM_EN (0x01 << 6) //BIT6
|
|
#define BEQ_ACM_EN (0x01 << 5) //BIT5
|
|
#define ACM_HW_EN (0x01 << 4) //BIT4
|
|
#define TXOPSEL (0x01 << 3) //BIT3
|
|
#define VOQ_ACM_CTL (0x01 << 2) //BIT2 // Set to 1 when AC_VO used time reaches or exceeds the admitted time
|
|
#define VIQ_ACM_CTL (0x01 << 1) //BIT1 // Set to 1 when AC_VI used time reaches or exceeds the admitted time
|
|
#define BEQ_ACM_CTL (0x01 << 0) //BIT0 // Set to 1 when AC_BE used time reaches or exceeds the admitted time
|
|
CONFIG5 = 0x0D8,
|
|
#define CONFIG5_TX_FIFO_OK ((1<<7))
|
|
#define CONFIG5_RX_FIFO_OK ((1<<6))
|
|
#define CONFIG5_CALON ((1<<5))
|
|
#define CONFIG5_EACPI ((1<<2))
|
|
#define CONFIG5_LANWake ((1<<1))
|
|
#define CONFIG5_PME_STS ((1<<0))
|
|
TX_DMA_POLLING = 0x0fd,
|
|
#define TX_DMA_POLLING_BEACON_SHIFT 7
|
|
#define TX_DMA_POLLING_HIPRIORITY_SHIFT 6
|
|
#define TX_DMA_POLLING_NORMPRIORITY_SHIFT 5
|
|
#define TX_DMA_POLLING_LOWPRIORITY_SHIFT 4
|
|
#define TX_DMA_STOP_BEACON_SHIFT 3
|
|
#define TX_DMA_STOP_HIPRIORITY_SHIFT 2
|
|
#define TX_DMA_STOP_NORMPRIORITY_SHIFT 1
|
|
#define TX_DMA_STOP_LOWPRIORITY_SHIFT 0
|
|
CWR = 0x0DC,
|
|
RetryCTR = 0x0DE,
|
|
INT_MIG = 0x0E2, // Interrupt Migration (0xE2 ~ 0xE3)
|
|
TID_AC_MAP = 0x0E8, // TID to AC Mapping Register
|
|
ANA_PARAM3 = 0x0EE,
|
|
|
|
|
|
//page 1
|
|
Wakeup0 = 0x084,
|
|
Wakeup1 = 0x08C,
|
|
Wakeup2LD = 0x094,
|
|
Wakeup2HD = 0x09C,
|
|
Wakeup3LD = 0x0A4,
|
|
Wakeup3HD = 0x0AC,
|
|
Wakeup4LD = 0x0B4,
|
|
Wakeup4HD = 0x0BC,
|
|
CRC0 = 0x0C4,
|
|
CRC1 = 0x0C6,
|
|
CRC2 = 0x0C8,
|
|
CRC3 = 0x0CA,
|
|
CRC4 = 0x0CC,
|
|
/* 0x00CE - 0x00D3 - reserved */
|
|
|
|
RFSW_CTRL = 0x272, // 0x272-0x273.
|
|
|
|
/**************************************************************************/
|
|
FER = 0x0F0,
|
|
FEMR = 0x0F4,
|
|
FPSR = 0x0F8,
|
|
FFER = 0x0FC,
|
|
|
|
AC_VO_PARAM = 0x0F0, // AC_VO Parameters Record
|
|
AC_VI_PARAM = 0x0F4, // AC_VI Parameters Record
|
|
AC_BE_PARAM = 0x0F8, // AC_BE Parameters Record
|
|
AC_BK_PARAM = 0x0FC, // AC_BK Parameters Record
|
|
TALLY_SEL = 0x0fc,
|
|
#endif
|
|
}
|
|
;
|
|
//----------------------------------------------------------------------------
|
|
// 818xB AnaParm & AnaParm2 Register
|
|
//----------------------------------------------------------------------------
|
|
//#define ANAPARM_ASIC_ON 0x45090658
|
|
//#define ANAPARM2_ASIC_ON 0x727f3f52
|
|
|
|
#define GPI 0x108
|
|
#define GPO 0x109
|
|
#define GPE 0x10a
|
|
|
|
#define ANAPAR_FOR_8192PciE 0x17 // Analog parameter register
|
|
|
|
#define MSR_NOLINK 0x00
|
|
#define MSR_ADHOC 0x01
|
|
#define MSR_INFRA 0x02
|
|
#define MSR_AP 0x03
|
|
|
|
#endif
|