dect/linux-2.6
Archived
14
0
Fork 0
Code Releases Activity
This repository has been archived on 2022-02-17. You can view files and clone it, but cannot push or open issues or pull requests.
linux-2.6/drivers/staging/msm/mdp_dma_lcdc.c
Stepan Moskovchenko 9d20015391 Staging: add MSM framebuffer driver 
Qualcomm development of the MSM SOC framebuffer driver has
diverged significantly from the driver used by Android. This
is a snapshot of our current driver, in all it's agony. We are
putting this in staging to help with the process of converging
the two drivers.

At this point, the driver has been tested only in dumb
framebuffer mode.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
[dwalker@codeaurora.org: added a small compile fix and TODO.]
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04 13:38:54 -07:00

380 lines
9.9 KiB
C
Raw Blame History

/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/time.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/hrtimer.h>
#include <linux/delay.h>
#include <mach/hardware.h>
#include <linux/io.h>
#include <asm/system.h>
#include <asm/mach-types.h>
#include <linux/semaphore.h>
#include <linux/spinlock.h>
#include <linux/fb.h>
#include "mdp.h"
#include "msm_fb.h"
#include "mdp4.h"
#ifdef CONFIG_FB_MSM_MDP40
#define LCDC_BASE 0xC0000
#define DTV_BASE 0xD0000
#define DMA_E_BASE 0xB0000
#else
#define LCDC_BASE 0xE0000
#endif
#define DMA_P_BASE 0x90000
extern spinlock_t mdp_spin_lock;
#ifndef CONFIG_FB_MSM_MDP40
extern uint32 mdp_intr_mask;
#endif
int first_pixel_start_x;
int first_pixel_start_y;
int mdp_lcdc_on(struct platform_device *pdev)
{
int lcdc_width;
int lcdc_height;
int lcdc_bpp;
int lcdc_border_clr;
int lcdc_underflow_clr;
int lcdc_hsync_skew;
int hsync_period;
int hsync_ctrl;
int vsync_period;
int display_hctl;
int display_v_start;
int display_v_end;
int active_hctl;
int active_h_start;
int active_h_end;
int active_v_start;
int active_v_end;
int ctrl_polarity;
int h_back_porch;
int h_front_porch;
int v_back_porch;
int v_front_porch;
int hsync_pulse_width;
int vsync_pulse_width;
int hsync_polarity;
int vsync_polarity;
int data_en_polarity;
int hsync_start_x;
int hsync_end_x;
uint8 *buf;
int bpp;
uint32 dma2_cfg_reg;
struct fb_info *fbi;
struct fb_var_screeninfo *var;
struct msm_fb_data_type *mfd;
uint32 dma_base;
uint32 timer_base = LCDC_BASE;
uint32 block = MDP_DMA2_BLOCK;
int ret;
mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
if (!mfd)
return -ENODEV;
if (mfd->key != MFD_KEY)
return -EINVAL;
fbi = mfd->fbi;
var = &fbi->var;
/* MDP cmd block enable */
mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
bpp = fbi->var.bits_per_pixel / 8;
buf = (uint8 *) fbi->fix.smem_start;
buf += fbi->var.xoffset * bpp + fbi->var.yoffset * fbi->fix.line_length;
dma2_cfg_reg = DMA_PACK_ALIGN_LSB | DMA_DITHER_EN | DMA_OUT_SEL_LCDC;
if (mfd->fb_imgType == MDP_BGR_565)
dma2_cfg_reg |= DMA_PACK_PATTERN_BGR;
else
dma2_cfg_reg |= DMA_PACK_PATTERN_RGB;
if (bpp == 2)
dma2_cfg_reg |= DMA_IBUF_FORMAT_RGB565;
else if (bpp == 3)
dma2_cfg_reg |= DMA_IBUF_FORMAT_RGB888;
else
dma2_cfg_reg |= DMA_IBUF_FORMAT_xRGB8888_OR_ARGB8888;
switch (mfd->panel_info.bpp) {
case 24:
dma2_cfg_reg |= DMA_DSTC0G_8BITS |
DMA_DSTC1B_8BITS | DMA_DSTC2R_8BITS;
break;
case 18:
dma2_cfg_reg |= DMA_DSTC0G_6BITS |
DMA_DSTC1B_6BITS | DMA_DSTC2R_6BITS;
break;
case 16:
dma2_cfg_reg |= DMA_DSTC0G_6BITS |
DMA_DSTC1B_5BITS | DMA_DSTC2R_5BITS;
break;
default:
printk(KERN_ERR "mdp lcdc can't support format %d bpp!\n",
mfd->panel_info.bpp);
return -ENODEV;
}
/* DMA register config */
dma_base = DMA_P_BASE;
#ifdef CONFIG_FB_MSM_MDP40
if (mfd->panel.type == HDMI_PANEL)
dma_base = DMA_E_BASE;
#endif
/* starting address */
MDP_OUTP(MDP_BASE + dma_base + 0x8, (uint32) buf);
/* active window width and height */
MDP_OUTP(MDP_BASE + dma_base + 0x4, ((fbi->var.yres) << 16) |
(fbi->var.xres));
/* buffer ystride */
MDP_OUTP(MDP_BASE + dma_base + 0xc, fbi->fix.line_length);
/* x/y coordinate = always 0 for lcdc */
MDP_OUTP(MDP_BASE + dma_base + 0x10, 0);
/* dma config */
MDP_OUTP(MDP_BASE + dma_base, dma2_cfg_reg);
/*
* LCDC timing setting
*/
h_back_porch = var->left_margin;
h_front_porch = var->right_margin;
v_back_porch = var->upper_margin;
v_front_porch = var->lower_margin;
hsync_pulse_width = var->hsync_len;
vsync_pulse_width = var->vsync_len;
lcdc_border_clr = mfd->panel_info.lcdc.border_clr;
lcdc_underflow_clr = mfd->panel_info.lcdc.underflow_clr;
lcdc_hsync_skew = mfd->panel_info.lcdc.hsync_skew;
lcdc_width = mfd->panel_info.xres;
lcdc_height = mfd->panel_info.yres;
lcdc_bpp = mfd->panel_info.bpp;
hsync_period =
hsync_pulse_width + h_back_porch + lcdc_width + h_front_porch;
hsync_ctrl = (hsync_period << 16) | hsync_pulse_width;
hsync_start_x = hsync_pulse_width + h_back_porch;
hsync_end_x = hsync_period - h_front_porch - 1;
display_hctl = (hsync_end_x << 16) | hsync_start_x;
vsync_period =
(vsync_pulse_width + v_back_porch + lcdc_height +
v_front_porch) * hsync_period;
display_v_start =
(vsync_pulse_width + v_back_porch) * hsync_period + lcdc_hsync_skew;
display_v_end =
vsync_period - (v_front_porch * hsync_period) + lcdc_hsync_skew - 1;
if (lcdc_width != var->xres) {
active_h_start = hsync_start_x + first_pixel_start_x;
active_h_end = active_h_start + var->xres - 1;
active_hctl =
ACTIVE_START_X_EN | (active_h_end << 16) | active_h_start;
} else {
active_hctl = 0;
}
if (lcdc_height != var->yres) {
active_v_start =
display_v_start + first_pixel_start_y * hsync_period;
active_v_end = active_v_start + (var->yres) * hsync_period - 1;
active_v_start |= ACTIVE_START_Y_EN;
} else {
active_v_start = 0;
active_v_end = 0;
}
#ifdef CONFIG_FB_MSM_MDP40
if (mfd->panel.type == HDMI_PANEL) {
block = MDP_DMA_E_BLOCK;
timer_base = DTV_BASE;
hsync_polarity = 0;
vsync_polarity = 0;
} else {
hsync_polarity = 1;
vsync_polarity = 1;
}
lcdc_underflow_clr |= 0x80000000; /* enable recovery */
#else
hsync_polarity = 0;
vsync_polarity = 0;
#endif
data_en_polarity = 0;
ctrl_polarity =
(data_en_polarity << 2) | (vsync_polarity << 1) | (hsync_polarity);
MDP_OUTP(MDP_BASE + timer_base + 0x4, hsync_ctrl);
MDP_OUTP(MDP_BASE + timer_base + 0x8, vsync_period);
MDP_OUTP(MDP_BASE + timer_base + 0xc, vsync_pulse_width * hsync_period);
if (timer_base == LCDC_BASE) {
MDP_OUTP(MDP_BASE + timer_base + 0x10, display_hctl);
MDP_OUTP(MDP_BASE + timer_base + 0x14, display_v_start);
MDP_OUTP(MDP_BASE + timer_base + 0x18, display_v_end);
MDP_OUTP(MDP_BASE + timer_base + 0x28, lcdc_border_clr);
MDP_OUTP(MDP_BASE + timer_base + 0x2c, lcdc_underflow_clr);
MDP_OUTP(MDP_BASE + timer_base + 0x30, lcdc_hsync_skew);
MDP_OUTP(MDP_BASE + timer_base + 0x38, ctrl_polarity);
MDP_OUTP(MDP_BASE + timer_base + 0x1c, active_hctl);
MDP_OUTP(MDP_BASE + timer_base + 0x20, active_v_start);
MDP_OUTP(MDP_BASE + timer_base + 0x24, active_v_end);
} else {
MDP_OUTP(MDP_BASE + timer_base + 0x18, display_hctl);
MDP_OUTP(MDP_BASE + timer_base + 0x1c, display_v_start);
MDP_OUTP(MDP_BASE + timer_base + 0x20, display_v_end);
MDP_OUTP(MDP_BASE + timer_base + 0x40, lcdc_border_clr);
MDP_OUTP(MDP_BASE + timer_base + 0x44, lcdc_underflow_clr);
MDP_OUTP(MDP_BASE + timer_base + 0x48, lcdc_hsync_skew);
MDP_OUTP(MDP_BASE + timer_base + 0x50, ctrl_polarity);
MDP_OUTP(MDP_BASE + timer_base + 0x2c, active_hctl);
MDP_OUTP(MDP_BASE + timer_base + 0x30, active_v_start);
MDP_OUTP(MDP_BASE + timer_base + 0x38, active_v_end);
}
ret = panel_next_on(pdev);
if (ret == 0) {
/* enable LCDC block */
MDP_OUTP(MDP_BASE + timer_base, 1);
mdp_pipe_ctrl(block, MDP_BLOCK_POWER_ON, FALSE);
}
/* MDP cmd block disable */
mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
return ret;
}
int mdp_lcdc_off(struct platform_device *pdev)
{
int ret = 0;
struct msm_fb_data_type *mfd;
uint32 timer_base = LCDC_BASE;
uint32 block = MDP_DMA2_BLOCK;
mfd = (struct msm_fb_data_type *)platform_get_drvdata(pdev);
#ifdef CONFIG_FB_MSM_MDP40
if (mfd->panel.type == HDMI_PANEL) {
block = MDP_DMA_E_BLOCK;
timer_base = DTV_BASE;
}
#endif
/* MDP cmd block enable */
mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON, FALSE);
MDP_OUTP(MDP_BASE + timer_base, 0);
/* MDP cmd block disable */
mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, FALSE);
mdp_pipe_ctrl(block, MDP_BLOCK_POWER_OFF, FALSE);
ret = panel_next_off(pdev);
/* delay to make sure the last frame finishes */
mdelay(100);
return ret;
}
void mdp_lcdc_update(struct msm_fb_data_type *mfd)
{
struct fb_info *fbi = mfd->fbi;
uint8 *buf;
int bpp;
unsigned long flag;
uint32 dma_base;
int irq_block = MDP_DMA2_TERM;
#ifdef CONFIG_FB_MSM_MDP40
int intr = INTR_DMA_P_DONE;
#endif
if (!mfd->panel_power_on)
return;
/* no need to power on cmd block since it's lcdc mode */
if (!mfd->ibuf.visible_swapped) {
bpp = fbi->var.bits_per_pixel / 8;
buf = (uint8 *) fbi->fix.smem_start;
buf += fbi->var.xoffset * bpp +
fbi->var.yoffset * fbi->fix.line_length;
} else {
/* we've done something to update the pointer. */
bpp = mfd->ibuf.bpp;
buf = mfd->ibuf.buf;
}
dma_base = DMA_P_BASE;
#ifdef CONFIG_FB_MSM_MDP40
if (mfd->panel.type == HDMI_PANEL) {
intr = INTR_DMA_E_DONE;
irq_block = MDP_DMA_E_TERM;
dma_base = DMA_E_BASE;
}
#endif
/* starting address */
MDP_OUTP(MDP_BASE + dma_base + 0x8, (uint32) buf);
/* enable LCDC irq */
spin_lock_irqsave(&mdp_spin_lock, flag);
mdp_enable_irq(irq_block);
INIT_COMPLETION(mfd->dma->comp);
mfd->dma->waiting = TRUE;
#ifdef CONFIG_FB_MSM_MDP40
outp32(MDP_INTR_CLEAR, intr);
mdp_intr_mask |= intr;
outp32(MDP_INTR_ENABLE, mdp_intr_mask);
#else
outp32(MDP_INTR_CLEAR, LCDC_FRAME_START);
mdp_intr_mask |= LCDC_FRAME_START;
outp32(MDP_INTR_ENABLE, mdp_intr_mask);
#endif
spin_unlock_irqrestore(&mdp_spin_lock, flag);
if (mfd->ibuf.vsync_enable)
wait_for_completion_killable(&mfd->dma->comp);
mdp_disable_irq(irq_block);
}
View git blame Copy permalink