![Stepan Moskovchenko](/assets/img/avatar_default.png)
Qualcomm development of the MSM SOC framebuffer driver has diverged significantly from the driver used by Android. This is a snapshot of our current driver, in all it's agony. We are putting this in staging to help with the process of converging the two drivers. At this point, the driver has been tested only in dumb framebuffer mode. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> [dwalker@codeaurora.org: added a small compile fix and TODO.] Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
291 lines
6 KiB
C
291 lines
6 KiB
C
/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
* 02110-1301, USA.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#ifdef CONFIG_ARCH_MSM7X30
|
|
#include <linux/mfd/pmic8058.h>
|
|
#endif
|
|
#include <mach/gpio.h>
|
|
#include "msm_fb.h"
|
|
|
|
static int lcdc_sharp_panel_off(struct platform_device *pdev);
|
|
|
|
static int spi_cs;
|
|
static int spi_sclk;
|
|
static int spi_mosi;
|
|
static int spi_miso;
|
|
static unsigned char bit_shift[8] = { (1 << 7), /* MSB */
|
|
(1 << 6),
|
|
(1 << 5),
|
|
(1 << 4),
|
|
(1 << 3),
|
|
(1 << 2),
|
|
(1 << 1),
|
|
(1 << 0) /* LSB */
|
|
};
|
|
|
|
struct sharp_state_type {
|
|
boolean disp_initialized;
|
|
boolean display_on;
|
|
boolean disp_powered_up;
|
|
};
|
|
|
|
struct sharp_spi_data {
|
|
u8 addr;
|
|
u8 data;
|
|
};
|
|
|
|
static struct sharp_spi_data init_sequence[] = {
|
|
{ 15, 0x01 },
|
|
{ 5, 0x01 },
|
|
{ 7, 0x10 },
|
|
{ 9, 0x1E },
|
|
{ 10, 0x04 },
|
|
{ 17, 0xFF },
|
|
{ 21, 0x8A },
|
|
{ 22, 0x00 },
|
|
{ 23, 0x82 },
|
|
{ 24, 0x24 },
|
|
{ 25, 0x22 },
|
|
{ 26, 0x6D },
|
|
{ 27, 0xEB },
|
|
{ 28, 0xB9 },
|
|
{ 29, 0x3A },
|
|
{ 49, 0x1A },
|
|
{ 50, 0x16 },
|
|
{ 51, 0x05 },
|
|
{ 55, 0x7F },
|
|
{ 56, 0x15 },
|
|
{ 57, 0x7B },
|
|
{ 60, 0x05 },
|
|
{ 61, 0x0C },
|
|
{ 62, 0x80 },
|
|
{ 63, 0x00 },
|
|
{ 92, 0x90 },
|
|
{ 97, 0x01 },
|
|
{ 98, 0xFF },
|
|
{ 113, 0x11 },
|
|
{ 114, 0x02 },
|
|
{ 115, 0x08 },
|
|
{ 123, 0xAB },
|
|
{ 124, 0x04 },
|
|
{ 6, 0x02 },
|
|
{ 133, 0x00 },
|
|
{ 134, 0xFE },
|
|
{ 135, 0x22 },
|
|
{ 136, 0x0B },
|
|
{ 137, 0xFF },
|
|
{ 138, 0x0F },
|
|
{ 139, 0x00 },
|
|
{ 140, 0xFE },
|
|
{ 141, 0x22 },
|
|
{ 142, 0x0B },
|
|
{ 143, 0xFF },
|
|
{ 144, 0x0F },
|
|
{ 145, 0x00 },
|
|
{ 146, 0xFE },
|
|
{ 147, 0x22 },
|
|
{ 148, 0x0B },
|
|
{ 149, 0xFF },
|
|
{ 150, 0x0F },
|
|
{ 202, 0x30 },
|
|
{ 30, 0x01 },
|
|
{ 4, 0x01 },
|
|
{ 31, 0x41 },
|
|
};
|
|
|
|
static struct sharp_state_type sharp_state = { 0 };
|
|
static struct msm_panel_common_pdata *lcdc_sharp_pdata;
|
|
|
|
static void sharp_spi_write_byte(u8 val)
|
|
{
|
|
int i;
|
|
|
|
/* Clock should be Low before entering */
|
|
for (i = 0; i < 8; i++) {
|
|
/* #1: Drive the Data (High or Low) */
|
|
if (val & bit_shift[i])
|
|
gpio_set_value(spi_mosi, 1);
|
|
else
|
|
gpio_set_value(spi_mosi, 0);
|
|
|
|
/* #2: Drive the Clk High and then Low */
|
|
gpio_set_value(spi_sclk, 1);
|
|
gpio_set_value(spi_sclk, 0);
|
|
}
|
|
}
|
|
|
|
static void serigo(u8 reg, u8 data)
|
|
{
|
|
/* Enable the Chip Select - low */
|
|
gpio_set_value(spi_cs, 0);
|
|
udelay(1);
|
|
|
|
/* Transmit register address first, then data */
|
|
sharp_spi_write_byte(reg);
|
|
|
|
/* Idle state of MOSI is Low */
|
|
gpio_set_value(spi_mosi, 0);
|
|
udelay(1);
|
|
sharp_spi_write_byte(data);
|
|
|
|
gpio_set_value(spi_mosi, 0);
|
|
gpio_set_value(spi_cs, 1);
|
|
}
|
|
|
|
static void sharp_spi_init(void)
|
|
{
|
|
spi_sclk = *(lcdc_sharp_pdata->gpio_num);
|
|
spi_cs = *(lcdc_sharp_pdata->gpio_num + 1);
|
|
spi_mosi = *(lcdc_sharp_pdata->gpio_num + 2);
|
|
spi_miso = *(lcdc_sharp_pdata->gpio_num + 3);
|
|
|
|
/* Set the output so that we don't disturb the slave device */
|
|
gpio_set_value(spi_sclk, 0);
|
|
gpio_set_value(spi_mosi, 0);
|
|
|
|
/* Set the Chip Select deasserted (active low) */
|
|
gpio_set_value(spi_cs, 1);
|
|
}
|
|
|
|
static void sharp_disp_powerup(void)
|
|
{
|
|
if (!sharp_state.disp_powered_up && !sharp_state.display_on)
|
|
sharp_state.disp_powered_up = TRUE;
|
|
}
|
|
|
|
static void sharp_disp_on(void)
|
|
{
|
|
int i;
|
|
|
|
if (sharp_state.disp_powered_up && !sharp_state.display_on) {
|
|
for (i = 0; i < ARRAY_SIZE(init_sequence); i++) {
|
|
serigo(init_sequence[i].addr,
|
|
init_sequence[i].data);
|
|
}
|
|
mdelay(10);
|
|
serigo(31, 0xC1);
|
|
mdelay(10);
|
|
serigo(31, 0xD9);
|
|
serigo(31, 0xDF);
|
|
|
|
sharp_state.display_on = TRUE;
|
|
}
|
|
}
|
|
|
|
static int lcdc_sharp_panel_on(struct platform_device *pdev)
|
|
{
|
|
if (!sharp_state.disp_initialized) {
|
|
lcdc_sharp_pdata->panel_config_gpio(1);
|
|
sharp_spi_init();
|
|
sharp_disp_powerup();
|
|
sharp_disp_on();
|
|
sharp_state.disp_initialized = TRUE;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int lcdc_sharp_panel_off(struct platform_device *pdev)
|
|
{
|
|
if (sharp_state.disp_powered_up && sharp_state.display_on) {
|
|
serigo(4, 0x00);
|
|
mdelay(40);
|
|
serigo(31, 0xC1);
|
|
mdelay(40);
|
|
serigo(31, 0x00);
|
|
mdelay(100);
|
|
sharp_state.display_on = FALSE;
|
|
sharp_state.disp_initialized = FALSE;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __init sharp_probe(struct platform_device *pdev)
|
|
{
|
|
if (pdev->id == 0) {
|
|
lcdc_sharp_pdata = pdev->dev.platform_data;
|
|
return 0;
|
|
}
|
|
msm_fb_add_device(pdev);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver this_driver = {
|
|
.probe = sharp_probe,
|
|
.driver = {
|
|
.name = "lcdc_sharp_wvga",
|
|
},
|
|
};
|
|
|
|
static struct msm_fb_panel_data sharp_panel_data = {
|
|
.on = lcdc_sharp_panel_on,
|
|
.off = lcdc_sharp_panel_off,
|
|
};
|
|
|
|
static struct platform_device this_device = {
|
|
.name = "lcdc_sharp_wvga",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &sharp_panel_data,
|
|
}
|
|
};
|
|
|
|
static int __init lcdc_sharp_panel_init(void)
|
|
{
|
|
int ret;
|
|
struct msm_panel_info *pinfo;
|
|
|
|
#ifdef CONFIG_FB_MSM_MDDI_AUTO_DETECT
|
|
if (msm_fb_detect_client("lcdc_sharp_wvga_pt"))
|
|
return 0;
|
|
#endif
|
|
|
|
ret = platform_driver_register(&this_driver);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pinfo = &sharp_panel_data.panel_info;
|
|
pinfo->xres = 480;
|
|
pinfo->yres = 800;
|
|
pinfo->type = LCDC_PANEL;
|
|
pinfo->pdest = DISPLAY_1;
|
|
pinfo->wait_cycle = 0;
|
|
pinfo->bpp = 18;
|
|
pinfo->fb_num = 2;
|
|
pinfo->clk_rate = 24500000;
|
|
pinfo->bl_max = 4;
|
|
pinfo->bl_min = 1;
|
|
|
|
pinfo->lcdc.h_back_porch = 20;
|
|
pinfo->lcdc.h_front_porch = 10;
|
|
pinfo->lcdc.h_pulse_width = 10;
|
|
pinfo->lcdc.v_back_porch = 2;
|
|
pinfo->lcdc.v_front_porch = 2;
|
|
pinfo->lcdc.v_pulse_width = 2;
|
|
pinfo->lcdc.border_clr = 0;
|
|
pinfo->lcdc.underflow_clr = 0xff;
|
|
pinfo->lcdc.hsync_skew = 0;
|
|
|
|
ret = platform_device_register(&this_device);
|
|
if (ret)
|
|
platform_driver_unregister(&this_driver);
|
|
|
|
return ret;
|
|
}
|
|
|
|
module_init(lcdc_sharp_panel_init);
|